RESUMO
Introdução: O processo de desmineralização proveniente da cárie leva à formação de manchas brancas que são a primeira manifestação visível da doença. Os infiltrantes resinosos surgem como uma alternativa para o tratamento dessas lesões não cavitadas, pois sãoresinas de baixa viscosidade e faz parte dos procedimentos que visam uma odontologia menos invasiva. Objetivo: Este estudo objetiva relatar a experiência clínica no uso de infiltrante resinoso, Icon, em lesões de mancha branca de etiologias cariosa e não cariosa em dois pacientes distintos, insatisfeitos com a estética do seu sorriso. Descrição do caso: Ao exame clínico foi observado nos pacientes com lesões brancas. No primeiro paciente, de 14 anos, verificou-se a presença da atividade de cárie e micro cavitações. Dessa forma, o plano de tratamento perpassou orientação de higiene oral supervisionada, aplicação de verniz fluoretado, Enamelast, semanal, adequação do meio com restaurações em resina, e só então o uso do infiltrante. A segunda paciente, de 11 anos, já possuía saúde bucal adequada e tinha queixa estética devido à lesão branca não cariosa, hipoplasia, cujo plano de tratamento foi à utilização do Icon apenas. Conclusões: Nos dois casos obteve-se melhoria estética considerável com este procedimento microinvasivo. Melhoria na saúde bucal, aliado à devolução da estética, pode ser observada com o uso de infiltrantes resinosos (AU).
Introduction: The process of demineralization resulting from caries leads to the formation of white spots that are the first visible manifestation of the disease. Resin infiltrants appear as an alternative for the treatment of these non-cavitated lesions, since they are low viscosity resins and are part of the procedures that aim at a less invasive dentistry.Objective:This study aims to report the clinical experience in the use of a resin infiltrant, Icon,in white spot lesions of carious and non-carious etiologies in two different patients who were dissatisfied with the esthetics of their smiles.Methodology: On clinical examination, white lesions were observed in both patients. In the first patient,14 years old,the presence of caries activity and micro cavitations was verified. Thus, the treatment plan included supervised oral hygiene guidance, weekly application of fluoride varnish,Enamelast, adaptation of the environment with resin restorations, and, onlythen, the use of the infiltrant, Icon. The second patient, 11 years old,already had adequate oral health and had an esthetic complaint due to a non-carious white lesion, hypoplasia, whose treatment plan consisted of the use of Icon only.Conclusions:In both cases considerable esthetic improvement was obtained with this microinvasive procedure. Improvement in oral health, combined with the return of esthetics, can be observed with the use of resin infiltrants (AU).
Introducción: El proceso de desmineralización resultante de la caries conduce a la formación de manchas blancas, que son la primera manifestación visible de la enfermedad. Losinfiltrantes de resina aparecen como una alternativa para el tratamiento de estas lesiones no cavitadas, pues se tratan de resinas de baja viscosidad y forman parte de los procedimientos que buscan una odontología menos invasiva. Objetivo:Este estudio tiene como objetivo relatar la experiencia clínica en el uso del infiltrante de resina,Iconen lesiones de mancha blanca de etiologías cariosas y no cariosas en dos pacientes diferentes, insatisfechos con la estética de sus sonrisas.Metodología: En el examen clínico se observaron lesiones blancas en ambos pacientes. En el primer paciente, 14 añosse verificó la presencia de actividad de caries y micro cavitaciones. De ese modo, el plan de tratamiento incluyó la orientación supervisada de la higiene bucal,la aplicación semanal de barniz de flúor (Enamelast), la adaptación del entorno con restauraciones de resina y, sólo después, el uso del infiltrante,Icon. La segunda paciente, 11 años,ya tenía una salud bucal adecuada y presentaba una queja estética debido a una lesión blanca no cariosa, hipoplasia, cuyo plan de tratamiento fue el uso exclusivo de Icon. Conclusiones: En ambos casos, se consiguió una mejora estética considerable con este procedimiento microinvasivo. La mejora de la salud bucal, unida a la recuperación de la estética, puede observarse con el uso de infiltrantes de resina (AU).
Assuntos
Humanos , Masculino , Feminino , Criança , Adolescente , Cárie Dentária/prevenção & controle , Hipoplasia do Esmalte Dentário , Tratamento Conservador , Estética DentáriaRESUMO
Abstract This study aimed to evaluate in vitro the effect protocols and anticaries agents containing casein amorphous calcium fluoride phosphopeptide-phosphate (CPP-ACPF, MI Paste Plus), sodium trimetaphosphate (TMP) and fluoride (F), in remineralization of caries lesions. Bovine enamel blocks with initial caries lesions were divided into groups (n = 12): 1) Toothpaste without F-TMP-MI Plus (Placebo); 2) Toothpaste 1100 ppm F (1100F), 3) 1100F + MI Paste Plus (1100F-MI Paste Plus), 4) Toothpaste with 1100F + Neutral gel with 4,500 ppm F + 5%TMP (1100F + Gel TMP) and 5) Toothpaste with 1100F + Neutral gel with 9,000 ppm F (1100F + Gel F). For the 4 and 5 groups the gel was applied only once for 1 minute, initially to the study. For the 3 group, after treatment with 1100F, MI Paste Plus was applied 2x/day for 3 minute. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); profile and depth of the subsuperficial lesion (PLM); concentrations of F, calcium (Ca) and phosphorus (P) in enamel was determined. The data were analyzed by ANOVA (1-criterion) and Student-Newman-Keuls test (p < 0.001). Treatment with 1100F alone led to ~ 28% higher remineralization when compared to treatment with 1100F associated with MI Paste Plus (p < 0.001). The 1100F and 1100F + Gel F groups showed similar values for %SHR (p = 0.150). 1100F + Gel TMP treatment also remineralized the enamel surface by ~ 30% and 20% when compared to the 1100F + Gel F and 1100F groups (p < 0.001). The lower lesion depth (ΔKHN) was observed for the 1100F + Gel TMP group (p < 0.001), where it was 54% and 44% lower in comparison to the 1100F and 1100F + Gel F groups (p < 0.001). Polarized light microscopy photomicrographs showed subsurface lesions in all groups, but these lesions were present to a lower extent in the 1100F + Gel TMP group (p < 0.001). Treatment with 1100F + Gel TMP promoted an increase in the concentration of Ca in the enamel by ~ 57% and ~ 26% when compared to the 1100F and 1100F + MI Paste Plus groups (p < 0.001), respectively. There were no significant differences between the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001). Similar values of P in the enamel were observed in the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001), except for the 1100F + Gel TMP group, which presented a high concentration (p < 0.001). We conclude that the 1100F+TMP gel treatment/protocol led to a significant increased remineralization when compared to the other treatments/protocols and may be a promising strategy for patients with early caries lesions.
RESUMO
ABSTRACT Objective: To assess the impact of Molar Incisor Hypomineralization (MIH) and confounding factors on oral health-related quality of life (OHRQoL) according to the perception of 8 to 10-year-old children and their parents/caregivers. Material and Methods: A cross-sectional study including 403 students aged 8-10 years was carried out, in which OHRQoL was measured using the Child Perceptions Questionnaire administered to both children and parents/caregivers. The diagnosis of MIH was performed according to the previously proposed index. Dental caries experience, malocclusion, and sociodemographic factors were evaluated as confounders. Cluster analysis and Poisson regression with robust variance (p<0.05) were performed. Results: The prevalence of MIH was 13.4%. Parents/caregivers of children with MIH in incisors showed a higher impact prevalence in the emotional well-being domain (PR=1.92; 95%CI=1.16-3.19). Children with hypoplasia had a higher prevalence of negative impact on OHRQoL in the oral symptoms domain (PR=1.51; 95%CI=1.03-2.23). According to the perception of parents/caregivers, dental caries experience had a negative impact on the quality of life of students in the emotional well-being domain (PR=4.19; 95%CI=1.06-16.49) and in the total questionnaire score (PR=3.21; 95%CI=1.06-9.71). Conclusion: According to the perception of parents/caregivers, children with MIH in incisors showed a greater impact on OHRQoL. Additionally, the presence of hypoplasia affected the self-perception of OHRQoL in children, and caries experience influenced the OHRQoL of children, as perceived by parents/caregivers.
Assuntos
Humanos , Masculino , Feminino , Criança , Qualidade de Vida/psicologia , Saúde Bucal , Desmineralização do Dente , Hipomineralização Molar , Autoimagem , Estudos Transversais/métodos , Análise Multivariada , Inquéritos e Questionários , Análise de Regressão , Cárie Dentária/epidemiologia , Hipoplasia do Esmalte Dentário/diagnóstico , Razão de Prevalências , Estudos Populacionais em Saúde Pública , Fatores SociodemográficosRESUMO
ABSTRACT Objective: To assess the efficacy of bioactive glass, self-assembling peptide, and ozone-remineralizing agents on the artificial carious lesion. Material and Methods: On the extracted 60 premolar teeth, an artificial carious lesion/demineralization was created. Later, the remineralization of demineralized teeth was done with respective remineralizing agents (Group A: Calcium sodium phosphosilicate (bioactive glass), Group B: Self-assembling peptide, Group C: Ozone remineralizing agents and Group D (Control): De ionized water. The degree of demineralization and remineralization were evaluated using the Vickers Hardness Number. Results: There was a decrease in microhardness from baseline to demineralization in all the groups, and this reduction was found to be statistically considerable. After the remineralization of demineralized samples with respective remineralizing agents, there was an increase in microhardness of 312.38, 276.67, and 254.42 in groups A, B, and C, respectively. In contrast, in Group D, there were no changes. Conclusion: Bioactive glass and self-assembling peptides had higher remineralizing capacities, which can be used to treat early carious lesions.
Assuntos
Dessensibilizantes Dentinários , Peptídeos , Dente Pré-Molar/lesões , Técnicas In Vitro , Análise de VariânciaRESUMO
ABSTRACT Objective: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. Material and Methods: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. Results: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. Conclusion: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.
RESUMO Objetivo: Este estudo observacional descritivo teve como objetivo determinar dados clinicamente relevantes e aplicáveis da espessura do esmalte (EES), considerando as diferenças mésiodistais dos dentes anteriores e posteriores e suas relações. Material e Métodos: A amostra consistiu em radiografias periapicais padronizadas do lado direito de 34 indivíduos, 21 do sexo feminino e 13 do sexo masculino, com idade entre 13 e 24 anos (média = 16 anos), com todos os dentes permanentes íntegros e sem apinhamento. Quatro radiografias periapicais e quatro radiografias interproximais foram tiradas e digitalizadas. As medidas de EES (dos pontos de contato mesial e distal até a junção dentina-esmalte) foram realizadas após correção para adequar a ampliação da imagem radiográfica. Para as diferenças entre as médias pareadas, foi aplicado o teste t de Student com correlação de Pearson, para avaliar a correlação entre elas. Resultados: A EES mesial e distal aumenta dos dentes anteriores para os posteriores. A EES dos incisivos variou entre 0,6 e 0,84 mm. Caninos, pré-molares e molares apresentaram EES superior a 1,0 mm e a EES dos molares atingiu valores entre 1,26 e 1,44 mm. Conclusão: As EES distais são significativamente maiores que as mesiais e progressivamente mais espessas dos dentes anteriores para posteriores. A redução interproximal do esmalte (RIP) dos incisivos centrais inferiores e laterais superiores deve ser evitada, minimizada ou realizada em suas superfícies distais. Radiografias periapicais e avaliação da EES remanescente são necessárias nos casos de retratamento. A localização e o número de discrepâncias no tamanho dos dentes devem ser determinados e considerados no planejamento do tratamento, para que sejam adequadamente compensados durante o tratamento com RIP.
RESUMO
Abstract Creating artificial caries-like lesions that mimic the complex changes observed in natural caries is essential for properly evaluating new strategies, dental materials, and devices designed to arrest their progression and avoid more costly and invasive treatments. Objective This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. Methodology In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). Results In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. Conclusion The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.
RESUMO
RESUMEN Las resinas compuestas son el material más utilizado para restauraciones en la última década. Para colocarlas es necesario usar un sistema adhesivo que sirva de agente de unión entre la estructura dentaria y la restauración. Es ahí donde se colocan los sistemas adhesivos universales. Sin embargo, uno de los principales problemas en las restauraciones es la microfiltración. Esta se define como el paso de bacterias o fluidos entre el material restaurador y la cavidad preparada. Objetivo: Comparar el grado de microfiltración entre tres sistemas restauradores utilizando adhesivos universales antes y después del proceso de termociclado. Material y métodos: Estudio experimental in vitro cuya muestra fue de 120 piezas anteriores de bovinos. Se utilizaron tres marcas de sistemas restauradores para realizar restauraciones clase V: 3M®, FGM® e Ivoclar®. Cada marca contó con un grupo control y un grupo experimental. Los grupos experimentales fueron sometidos a un proceso de termociclado. Seguido de ello, la totalidad de la muestra fue sumergida en azul de metileno durante 24 horas para su posterior corte y observación en el microscopio. Resultados: El sistema restaurador de la marca Ivoclar® demostró un menor grado de microfiltración en comparación con los sistemas restauradores de las marcas 3M® y FGM®. La prueba de chi-cuadrado demostró diferencia significativa entre los grupos control y experimental. Conclusiones: Existe diferencia significativa en el grado de microfiltración en las restauraciones clase V utilizando tres sistemas restauradores con adhesivos universales antes y después del termociclado.
ABSTRACT Composite resins are the most widely used material for restorations in the last decade. An adhesive system is required to serve as a bonding agent between the tooth structure and the restoration, and universal adhesive systems are used. However, one of the main problems in restorations is microleakage, defined as the passage of bacteria or fluids between the restorative material and the prepared cavity. Objective: To compare the degree of microleakage between three restorative systems using universal adhesives before and after the thermocycling process. Material and methods: Experimental in vitro study with a sample of dental anterior pieces of 120 bovines. Three brands of restorative systems were used for class V restorations: 3M®, FGM®, and Ivoclar®. Each brand had a control group and an experimental group. The experimental groups were subjected to a thermocycling process. After that, the sample was immersed in methylene blue for 24 hours for subsequent cutting and observation under the microscope. Results: The Ivoclar® brand restorative system showed lower microleakage than the 3M® and FGM® brand restorative systems. The chi-square test showed a significant difference between the control and experimental groups. Conclusions: There is a significant difference in the degree of microleakage in Class V restorations using three restorative systems with universal adhesives before and after thermocycling.
RESUMO As resinas compostas são o material mais utilizado para restaurações na última década. Para a sua colocação, é necessário utilizar um sistema adesivo que sirva de agente de ligação entre a estrutura dentária e a restauração. É aqui que são colocados os sistemas adesivos universais. No entanto, um dos principais problemas nas restaurações é a microinfiltração. A microinfiltração é definida como a passagem de bactérias ou fluidos entre o material de restauração e a cavidade preparada. Objetivo: Comparar o grau de microinfiltração entre três sistemas restauradores utilizando adesivos universais antes e depois do processo de termociclagem. Material e métodos: Estudo experimental in vitro com uma amostra de 120 unidades de dentes anteriores de bovinos. Foram utilizadas três marcas de sistemas restauradores para restaurações de classe V: 3M®, FGM® e Ivoclar®. Cada marca tinha um grupo de controlo e um grupo experimental. Os grupos experimentais foram submetidos a um processo de termociclagem. Em seguida, toda a amostra foi imersa em azul de metileno durante 24 horas para posterior corte e observação ao microscópio. Resultados: o sistema restaurador Ivoclar® apresentou um menor grau de microinfiltração em relação aos sistemas restauradores 3M® e FGM®. O teste do Qui-quadrado mostrou uma diferença significativa entre o grupo de controlo e o grupo experimental. Conclusões: Existe uma diferença significativa no grau de microinfiltração em restaurações de classe V utilizando três sistemas de restauração adesivos universais antes e depois da termociclagem.
RESUMO
Abstract This study evaluated the effect of toothbrushing on enamel-cementing material-ceramic bonded interfaces, using different cementing materials. Materials and Methods: Thirty enamel and thirty ceramic blocks were bonded with cementing materials to produce the samples that were bonded with three types of cementing materials: 1- RelyX Ultimate resin cement (REXU), 2- RelyX Unicem 2 self-adhesive resin cement (REU2) and 3- heated Z100 restorative composite (60°C). Bonded interfaces of the samples were toothbrushed and the surfaces of the 3 cementing materials were evaluated for roughness (RG, in µm), roughness profile (RP, in µm), and volume loss (VL, in µm3) (baseline and after 20,000 and 60,000 toothbrushing cycles). Data were evaluated by Generalized Linear Analysis (two factors: "material" and "toothbrushing cycle") and Bonferroni test (α=0.05). Results: REXU and Z100 exhibited lower RG than that presented by REU2, except after 60,000 toothbrushing cycles when only Z100 differed from REU2. The increase in toothbrushing cycles increased the RG and RP for all materials. REU2 also showed higher RP than those showed by REXU and Z100 when it was analyzed regarding the enamel. The VL of Z100 was the lowest with 20,000 toothbrushing cycles, regarding the enamel and ceramic. For 60,000 cycles, REXU showed the lowest VL regarding the ceramic, and REU2 had the highest VL regarding the enamel and ceramic. Conclusion: In general, REXU and Z100 showed the best results regarding the evaluations performed and the REU2 exhibited the highest RG, RP, and VL.
Resumo Este estudo avaliou o efeito da escovação nas interfaces de união esmalte-material cimentante-cerâmica, utilizando diferentes materiais cimentantes. Materiais e Métodos: Trinta esmaltes e trinta blocos cerâmicos foram unidos com materiais de cimentação para produzir as amostras que foram unidas com três tipos de materiais de cimentação: 1- cimento resinoso RelyX Ultimate (REXU), 2- cimento resinoso autoadesivo RelyX Unicem 2 (REU2) e 3-compósito restaurador aquecido Z100 (60°C). As interfaces coladas das amostras foram escovadas e as superfícies dos 3 materiais cimentantes foram avaliadas quanto à rugosidade (RG, em µm), perfil de rugosidade (RP, em µm) e perda de volume (VL, em µm3) (baseline e após 20.000 e 60.000 ciclos de escovação). Os dados foram avaliados por Análise Linear Generalizada (dois fatores: "material" e "ciclo de escovação") e teste de Bonferroni (α=0,05). Resultados: REXU e Z100 apresentaram menor RG do que REU2, exceto após 60.000 ciclos de escovação, quando Z100 diferiu apenas de REU2. O aumento dos ciclos de escovação aumentou o RG e RP para todos os materiais. O REU2 também apresentou PR maior que o REXU e Z100, quando analisado em relação ao esmalte. O VL de Z100 foi o menor com 20.000 ciclos de escovação em relação ao esmalte e cerâmica. Para 60.000 ciclos, o REXU apresentou o menor VL em relação à cerâmica e o REU2 o maior VL em relação ao esmalte e à cerâmica. Conclusão: De maneira geral, REXU e Z100 apresentaram os melhores resultados nas avaliações realizadas e o REU2 apresentou os maiores RG, RP e VL..
RESUMO
Considerando o uso de brocas para remoção da resina residual após descolagem do braquete e a possibilidade de injúrias à superfície do esmalte após o uso dessas brocas, este trabalho teve como objetivo realizar um estudo experimental, para avaliar a variação do aspecto superficial do esmalte de forma qualitativa, por meio da avaliação com imagens topográficas do esmalte dentário, utilizando-se a Microscopia Eletrônica de Varredura (MEV), a qual permitiu ilustrar e avaliar a superfície do esmalte após a fase de polimento final, realizada por dois métodos: taça de borracha ou escova Robinson. Foram utilizados 25 dentes pré-molares humanos, obtidos a partir de exodontias em pacientes que procuraram voluntariamente o curso de Residência em Cirurgia da Clínica Odontológica Universitária da Universidade Estadual de Londrina. Os dentes foram divididos em quatro grupos: A, B, C e D, contendo 6 dentes cada, de acordo com as brocas utilizadas para a remoção do remanescente adesivo e o polimento escolhido, além de um dente como "controle". Foi avaliada a rugosidade superficial do esmalte após a remoção da resina e a superfície do esmalte após o polimento com as duas opções apresentadas. Os resultados mostraram que, por observação e inspeção, as brocas removeram a resina residual de todos os dentes, porém, causaram riscos e ranhuras, como evidenciado nas imagens em MEV. Concluiu-se que não houve diferença estatística entre os métodos de polimento e que ambos foram importantes para a redução das marcas abrasivas, proporcionando uma superfície mais lisa do esmalte.
Considering the use of specific burs to remove residual resin after bracket debonding and the possibility of injuries to the dental enamel after using these burs, this study aimed to verify the variation in the enamel surface appearance in a qualitative way and evaluation with topographic images of the dental enamel. The use of Scanning Electron Microscopy (SEM) allowed to illustrate and evaluate the enamel surface after the final polishing phase using two methods: rubber cup or Robinson brush. Twenty-five human premolar teeth were obtained from extractions in patients who voluntarily sought the Oral Maxillofacial Surgery Residency at the Dental School from the State University of Londrina; the teeth were divided into four groups A, B, C and D containing 6 teeth each according to the burs used to remove the remaining adhesive and the chosen polishing, in addition to one tooth as a "control". Dental enamel surface roughness was evaluated after resin removal and enamel surface after polishing with the two methods presented. The results showed that by observation and inspection, the burs removed residual resin from all teeth, however, caused scratches and grooves as evidenced in the SEM images. Based on the results, there was no statistical difference between the polishing methods, and both were important for the reduction of abrasive marks and provided a smoother enamel surface.
RESUMO
Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.
Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.
RESUMO
Introdução: O efeito branqueador dos dentifrícios contendo Blue covarine é fundamentado no seu mecanismo de ação, caracterizado pela sua deposição na superfície dentária, alterando a percepção da cor. Objetivo: Revisar a literatura e buscar evidência científica sobre o efeito branqueador do Blue Covarine em tecidos mineralizados e materiais restauradores estéticos. Materiais e métodos: Para a revisão da literatura foram feitas buscas nas bases de dados PubMed, LILACS, BBO, SciELO e MEDLINE para identificar estudos clínicos e laboratoriais que avaliassem a ação branqueadora do agente óptico Blue covarine. Como estratégia de busca foram utilizados os descritores "Blue covarine", "Blue covarine e pasta de dentes", "Blue covarine and toothpaste", "Blue covarine e dentifrícios", "Blue covarine and dentifrices", "Blue covarine e dentifrícios branqueadores", "Blue covarine and whitening dentifrices", "Blue covarine e dentifrícios clareadores", "Blue covarine and bleaching dentifrices", "Blue covarine e pasta de dentes branqueadoras", "Blue covarine and whitening toothpaste", "Blue covarine e pasta de dentes clareadoras", "Blue covarine and bleaching toothpaste". Resultados: Dois pesquisadores selecionaram e analisaram criticamente 31 artigos, sendo 2 revisões da literatura, 4 estudos clínicos e 25 estudos laboratoriais. Divergências quanto ao desenho de estudo, métodos, amostra, critérios clínicos e parâmetros laboratoriais foram observados, além de conflitos de interesse. Conclusão: O Blue Covarine presente nos dentifrícios branqueadores parece ser efetivo na promoção do branqueamento dentário apenas quando associado aos agentes abrasivos presentes nas formulações, evidenciando que ensaios clínicos e laboratoriais, com metodologias semelhantes, são necessários para se obter evidência científica conclusiva sobre o efeito deste agente branqueador.(AU)
Introduction: The whitening effect of dentifrices containing Blue Covarine is based on its mechanism of action, characterized by its deposition on the tooth surface, altering the perception of color. Objective: To review the literature and seek scientific evidence on the whitening effect of Blue Covarine on mineralized tissues and aesthetic restorative materials. Materials and methods: For the literature review, searches were carried out in the PubMed, LILACS, BBO, SciELO and MEDLINE databases, in order to identify clinical and laboratory studies that evaluated the whitening action of the optical agent Blue Covarine. As a search strategy, the descriptors "Blue Covarine", "Blue Covarine and toothpaste", "Blue Covarine and dentifrices", "Blue Covarine and whitening dentifrices", "Blue Covarine and bleaching dentifrices", "Blue Covarine and whitening toothpaste", "Blue Covarine and bleaching toothpaste". Results: Two researchers selected and critically analyzed 31 articles, including 2 literature reviews, 4 clinical studies and 25 laboratory studies. Differences in study design, methods, sample, clinical criteria and laboratory parameters were observed, in addition to conflicts of interest. Conclusion: Blue Covarine present in whitening dentifrices seems to be effective in promoting dental whitening only when associated with abrasive agents present in the formulations, showing that clinical and laboratory tests, with similar methodologies, are necessary to obtain conclusive scientific evidence on the effect of this bleaching agent.(AU)
Assuntos
Humanos , Clareamento Dental/métodos , Dentifrícios/química , Isoindóis/química , Clareadores Dentários/química , Metaloporfirinas/química , Colorimetria , Esmalte Dentário/químicaRESUMO
Introduction: The use of enamel matrix-derived proteins (EMD) has increased in recent years due to their tissue-inducing properties that support periodontal regeneration. This study is an overview of systematic reviews with FRISBEE methodology on the use of EMD alone or combined with autologous bone graft materials (BGM) in the treatment of intrabony defects. Materials and Methods: A systematic search in the Epistemonikos database was performed. RevMan 5.3 and GRADEpro were used for data analysis and presentation Results: Four systematic reviews and two clinical trials were identified. All studies analysed change in probing depth, clinical attachment level, gingival margin level and bone defect depth (all changes in favour of EMD+BGM groups: mean difference (MD): 0.37 mm more, MD: 0.7 mm more, MD: 0.3 mm less, MD: 0.75 more, respectively). Conclusions: Adding autologous bone graft to EMD to treat intrabony defects showed better results, but not a relevant clinical difference compared to the use of EMD alone.
Introducción: El uso de proteínas derivadas de la matriz del esmalte (EMD) ha aumentado en los últimos años debido a sus propiedades inductoras de tejidos que apoyan la regeneración periodontal. Este estudio es una revisión sistemática de revisiones sistemáticas utilizando metodología FRISBEE sobre el uso de EMD solo o combinado con materiales injerto óseo autólogo (BGM) en el tratamiento de defectos intraóseos. Materiales y Métodos: Se realizó una búsqueda sistemática en la base de datos Epistemonikos. Se utilizaron RevMan 5.3 y GRADEpro para el análisis y la presentación de los datos. Resultados: Se identificaron cuatro revisiones sistemáticas y dos ensayos clínicos. Todos los estudios analizaron el cambio en la profundidad de sondaje, el nivel de inserción clínica, el nivel del margen gingival y la profundidad del defecto óseo (todos los cambios a favor de los grupos EMD+BGM: MD: 0,37 mm más, media de diferencia (MD): 0,7 mm más, MD: 0,3 mm menos, MD: 0,75 más, respectivamente). Conclusión: La adición de injerto óseo autólogo a la EMD para tratar defectos intraóseos mostró mejores resultados, pero no una diferencia clínica relevante en comparación con el uso de la EMD sola.
Assuntos
Humanos , Perda do Osso Alveolar/reabilitação , Transplante Ósseo/métodos , Proteínas do Esmalte Dentário/uso terapêutico , Doenças Periodontais , Transplante Autólogo , Regeneração ÓsseaRESUMO
Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.
Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.
RESUMO
Abstract: This study tested a novel in vitro dental erosion-abrasion model and the performance of cross-polarization optical coherence tomography (CP-OCT) in longitudinally monitoring the simulated lesions. Thirty human enamel specimens were prepared and randomized to receive three dental erosion-abrasion (EA) protocols: severe (s-EA, lemon juice/pH:2.5/4.25%w/v citric acid), moderate (m-EA, grapefruit juice/pH:3.5/1.03%w/v citric acid) and no-EA (water, control). EA challenge was performed by exposing the specimens to acidic solutions 4x/day and to brushing 2x/day with 1:3 fluoridated toothpaste slurry, for 14 days. Enamel thickness measurements were obtained using CP-OCT at baseline (D0), 7 (D7) and 14 days (D14) and micro-computed tomography (micro-CT) at D14. Enamel surface loss was measured with both CP-OCT and optical profilometry at D0, D7 and D14. Data was analyzed with repeated-measures ANOVA and Pearson's correlation (r) (α = 0.05). CP-OCT enamel thickness decreased over time in the s-EA group (D0 >D7 > D14, p < 0.001) and m-EA group (D0 > D14, p = 0.019) but did not change in the no-EA group (p = 0.30). Overall, CP-OCT and micro-CT results at D14 correlated moderately (r = 0.73). CP-OCT surface loss was highest for s-EA (p <0.001) but did not differ between moderate and no-EA (p = 0.25). Enamel surface loss with profilometry increased with severity (no-EA>m-EA>s-EA, p < 0.001). D14 surface loss was higher than D7 for both methods except for the no-EA group with profilometry. CP-OCT and profilometry had moderate overall correlation (r = 0.70). Our results revealed that the currently proposed in vitro dental erosion-abrasion model is valid and could simulate lesions of different severities over time. CP-OCT was a suitable method for monitoring the EA lesions.
RESUMO
ABSTRACT Objective: To evaluate the quality of information about Molar incisor Hypomineralization (MIH) on YouTubeTM. Material and Methods: Only videos in Portuguese aimed at dentists were included. The selected videos were analyzed by two calibrated evaluators, who extracted the information (classification, etiology, diagnosis, and treatment of MIH) and the quality was evaluated through a 20-point-checklist, according to the International Association of Pediatric Dentistry and European Academy of Pediatric Dentistry. Descriptive analysis and statistical tests were applied to assess the association (ANOVA and Kruskal-Wallis) or correlation (Spearman) between the final scores of the videos and their demographics. Results: Nineteen videos with 13.8±4.76 mean points were considered eligible. Most of the videos did not report the possible involvement of other groups of teeth (n=12), presence of atypical restorations (n=8) and hypersensitivity (n=7); and the different treatments for MIH were very variable. Twelve videos discussed differential diagnosis and 78.95% possible etiological factors; however, all of them presented clinical images. Data related to the video source and viewer interaction were not related to its quality (p>0.05). The number of likes (r=0.26), views (r=0.34) and video time (=0.58) show a weak and moderate correlation, respectively, with video score. Conclusion: Videos on YouTubeTM about MIH presented moderate or high quality, with heterogeneous information, and can act as a complementary aid source of information.
Assuntos
Humanos , Masculino , Feminino , Recursos Audiovisuais , Mídias Sociais , Hipomineralização Molar , Análise de Variância , Estatísticas não Paramétricas , Odontólogos/educação , Diagnóstico DiferencialRESUMO
ABSTRACT Objective: To evaluate an imaging protocol for use as a diagnostic and calibration tool for dentists before and after practical activity. Material and Methods: Thirty photos of children's teeth with or without changes in dental enamel were selected and evaluated by a group of experienced dentists previously calibrated to establish the diagnosis defined as the gold standard. After instructions, the images were shown to a group of postgraduate dentists for free identification of dental changes. Subsequently, a lecture on molar incisor hypomineralization (MIH) was carried out, and, at 14 days and all calibration was performed using the criteria previously. The retest was performed at 28 days. After experience in clinical activity in the following two weeks, the post-test was performed at 49 days. Data were analyzed using Cohen's kappa coefficient. Results: Theoretical learning on the subject showed low inter-examiner agreement when the diagnosis of defects was made from images obtained from intraoral photographs. After clinical practice, there was greater intra-examiner agreement. After theoretical training, dentists started to identify different types of enamel alteration, although with low agreement between them. Conclusion: Clinical experience in theoretical and imaging training favored the identification of defects. However, it is necessary to improve the protocol to establish a reliable and viable diagnostic method for calibration in MIH.
Assuntos
Humanos , Masculino , Feminino , Hipoplasia do Esmalte Dentário/diagnóstico por imagem , Hipomineralização Molar/diagnóstico por imagem , Calibragem/normas , Fotografia Dentária/instrumentaçãoRESUMO
O estudo avaliou o efeito da adição de cálcio (Ca) e fósforo (P), em quantidade correspondente ao ponto de saturação (PS) e ao coeficiente de solubilidade (CS), a géis clareadores contendo diferentes agentes espessantes na desmineralização do esmalte dentário. Foram manipulados géis clareadores contendo peróxido de hidrogênio (PH) a 35% e utilizados os espessantes carbopol 980 (CB); aerosil 200 (SP); poloxamer 407 (PX); goma guar (GG) e hidroxietilcelulose (HEC). Foram realizadas leituras iniciais da microdureza Knoop do esmalte empregando um microdurômetro, da rugosidade superficial em um perfilômetro de contato e da cor utilizando espectrofotômetro colorimétrico de reflectância. Os espécimes foram divididos em 5 grupos experimentais de acordo com o tipo de espessante. Cada grupo foi dividido em três subgrupos (n=20), de acordo com a suplementação mineral (0- nenhuma suplementação; PS adição de Ca e P de acordo com o PS calculado para aquele espessante; CS adição da quantidade máxima de Ca e P de acordo com o CS). Além disso, três grupos controles (n=20) foram preparados, sendo eles: CN (controle negativo água ultrapura); CP (controle positivo PH a 35% sem a adição de qualquer mineral); CC (controle positivo comercial - gel comercial Whiteness HP). Sobre cada espécime foram aplicados 0,050 g dos respectivos géis clareadores, durante 45 min. Os dados dos grupos experimentais foram analisados estatisticamente com ANOVA a 2 fatores (TIPO DE ESPESSANTE x ADIÇÃO DE SAIS DE CA E P) e teste de Tukey. A comparação com os grupos controle foi realizada com o teste de Dunnett (ï¡ = 5%). Para todas as mensurações realizadas, a ANOVA mostrou diferenças significativas para os dois fatores (p<0,05). Para a alteração da microdureza, os resultados do teste de Tukey foram: TIPO DE ESPESSANTE (p=0,0001): HEC 15,40(6,97)a, GG - 10,31(5,78)b, CB - 7,49(2,87)c, PX - 4,60(4,96)d, SP - 0,57(2,43)e; ADIÇÃO (p=0,0001): 0 - 12,34(7,22)a, S -10,31(5,76)b, CS -7,49(6,09)c. Para a alteração da rugosidade (p=0,0001), os resultados foram: TIPO DE ESPESSANTE (p=0,0001): SP - 5,19(23,36), GG - 9,70(17,75)ab, PX - 15,95(20,79)b, HEC - 53,58(71,82)c, CB - 55,49(63,69)c; ADIÇÃO (p=0,0001): 0 - 79,62(58,70)a, S - 3,23(12,08)a, CS - 1,09(9,44)b. Para a mudança de cor (ΔE), os resultados foram: TIPO DE ESPESSANTE (p=0,0001): SP - 5,40(2,92)a, GG - 3,13(1,83)a, PX - 3,18(2,57)ab, HEC - 3,82(2,05)bc, CB - 4,79(3,26)c. ADIÇÃO (p=0,2853): 0 - 4,37(2,60)a, S - 4,04(3,07)a, CS - 3,79(2,42)a. Os resultados para o teste de Dunnett para a microdureza: os grupos SP, SP-S e SP-CS não demonstraram diferenças com o grupo CN, e apenas os grupos GG e HEC-S não demostraram diferenças com o grupo CP e o grupo HEC-S para o CPC. Para a rugosidade, os grupos CB-CS, SP, PX-S, PX-CS, GG-S e GG-CS não demonstraram diferenças em relação ao grupo CN e todos os grupos apresentaram diferenças significativas para os grupos CP e CPC. Mediante os resultados desse estudo, podemos concluir que: A adição de cálcio e/ou fósforo em quantidades correspondente ao PS ou ao CS apenas do grupo SP impediu a queda da dureza e o aumento da rugosidade. Os demais grupos apresentaram alterações, porém sem afetar o tratamento clareador. (AU)
The aim of the study was to evaluate the effect of adding calcium (Ca) and phosphorus (P), in amounts corresponding to the saturation concentration (SC) and the solubility limit (SL), to bleaching gels containing different thickening agents on the demineralization of tooth enamel. Bleaching gels containing 35% hydrogen peroxide (PH) were manipulated and the thickeners were used: carbopol 980 (CB); aerosil 200 (SP); poloxamer 407 (PX); guar gum (GG) and hydroxyethylcellulose (HEC). The baseline readings of Knoop microhardness of the enamel using a microhardness, surface roughness using a contact profilometer and color using a colorimetric reflectance spectrophotometer were taken. The specimens were divided into 5 experimental groups according to the type of thickener. Each group was divided into three subgroups (n=20), according to mineral supplementation (0 - no supplementation; SC - addition of Ca and P according to the SC calculated for that thickener; SL - addition of the maximum amount of Ca and P according to SL). In addition, three control groups (n=20) were prepared, namely: NC (negative control ultra pure water); PC (positive control 35% pH without the addition of any mineral); CC (commercial positive control - commercial Whiteness HP gel). Were applied 0.050 g of the respective bleaching gels to each specimen for 45 min. The microhardness and surface roughness of the samples were measured immediately after bleaching. All samples were then immersed in artificial saliva for 7 days and the final color evaluated. Data from the experimental groups were statistically analyzed with 2-way ANOVA (THICKENER TYPE x MINERAL SUPPLEMENTATION) and Tukey test. Comparison with control groups was performed using Dunnett's test (ï¡ = 5%). For all measurements performed, ANOVA showed significant differences for the two factors (p<0.05). For microhardness change, the Tukey test results were: THICKENER TYPE (p=0.0001): HEC - 15.40(6.97)a, GG - 10.31(5.78)b, CB - 7.49(2.87)c, PX - 4 .60(4.96)d, SP - 0.57(2.43)e; ADDITION (p=0.0001): 0 - 12.34(7.22)a, SC -10.31(5.76)b, SL -7.49(6.09)c. For roughness change (p=0.0001), the results were: TYPE OF THICKENER (p=0.0001): SP - 5.19(23.36), GG - 9.70(17.75)ab, PX - 15.95(20.79)b, HEC - 53.58(71.82)c, CB - 55.49(63.69)c; ADDITION (p=0.0001): 0 - 79.62(58.70)a, SC - 3.23(12.08)a, SL - 1.09(9.44)b. For the color change (ΔE), the results were: TYPE OF THICKENER (p=0.0001): SP - 5.40(2.92)a, GG - 3.13(1.83)a, PX - 3.18(2.57)ab, HEC - 3.82(2.05)bc, CB - 4.79(3.26)c. ADDITION (p=0.2853): 0 - 4.37(2.60)a, SC - 4.04(3.07)a, SL - 3.79(2.42)a. The results for the Dunnett test for microhardness were: the SP, SP-S and SP-CS groups did not show differences with the CN group, and only the GG and HEC-S groups did not show differences with the CP group and the HEC-S for the CPC. For roughness, the CB-CS, SP, PX-S, PX-CS, GG-S and GG-CS groups did not show differences in relation to the CN group and all groups showed significant differences for the CP and CPC groups. By the results of this study, we can conclude that: The addition of calcium and/or phosphorus in amounts corresponding to the SC or to the SL of the aerosil group only prevented the drop in hardness and the increase in roughness. (AU)
Assuntos
Fósforo , Clareamento Dental , Desmineralização , Cálcio , Esmalte Dentário , EspessantesRESUMO
Abstract Microcosm biofilms can reproduce the complexity of a dental biofilm. However, different forms of cultivation have been used. The impact of the culture atmosphere on the development of microcosm biofilms and their potential to cause tooth demineralization has not yet been deeply studied. Objective This study analyzes the effects of three experimental cultivation models (microaerophile vs. anaerobiosis vs. experimental mixed) on the colony-forming units (CFU) of the cariogenic microorganisms and tooth demineralization. Methodology 90 bovine enamel and 90 dentin specimens were distributed into different atmospheres: 1) microaerophilia (5 days, 5% CO2); 2) anaerobiosis (5 days, jar); 3) mixed (2 days microaerophilia and 3 days anaerobiosis), which were treated with 0.12% chlorhexidine (positive control - CHX) or Phosphate-Buffered Saline (negative control - PBS) (n=15). Human saliva and McBain's saliva containing 0.2% sucrose were used for microcosm biofilm formation, for 5 days. From the second day to the end of the experiment, the specimens were treated with CHX or PBS (1x1 min/day). Colony-forming units (CFU) were counted, and tooth demineralization was analyzed using transverse microradiography (TMR). Data were subjected to two-way ANOVA and Tukey's or Sidak's test (p<0.05). Results CHX was able to reduce total microorganism's CFU compared to PBS (differences of 0.3-1.48 log10 CFU/mL), except for anaerobiosis and microaerophilia in enamel and dentin biofilm, respectively. In the case of dentin, no effect of CHX on Lactobacillus spp. was observed. CHX significantly reduced enamel demineralization compared to PBS (78% and 22% reductions for enamel and dentin, respectively). Enamel mineral loss did not differ when compared with the other atmospheres; however, the enamel lesion depth was greater under anaerobiosis. Dentin mineral loss was lower under anaerobiosis when compared with the other atmospheres. Conclusion The type of atmosphere has, in general, little influence on the cariogenic ability of the microcosm biofilm.
RESUMO
Abstract The purpose of this in vitro study was to test the hypothesis that fluoride treatment can prevent dental erosion on fluorotic enamel of different severities. It followed a 3×2 factorial design, considering a) fluorosis severity: sound (TF0, Thylstrup-Fejerskov Index), mild (TF1-2), moderate (TF3-4); and b) fluoride treatment: 0 (negative control) and 1150ppmF. Human molars with the three fluorosis severities (n=16, each) were selected and randomly assigned to the two fluoride treatments (n=8). Enamel blocks (4×4mm) were prepared from each tooth and subjected to a dental erosion cycling model, for 10 days. The daily cycling protocol consisted of erosive challenges (1% citric acid, pH 2.4), interspersed by periods of immersion in artificial saliva, and three 2-minute treatments with either 0 or 1150ppm F. The enamel volume loss (mm3) was calculated by subtracting values obtained by microtomography before and after cycling. Two-Way ANOVA showed no significant interaction between fluorosis severity and fluoride treatment (p=0.691), and no significant effect for either fluorosis severity (TF0 mean±standard-deviation: 13.5(10-2±0.42(10-2, TF1-2: 1.50(10-2±0.52(10-2, TF3-4: 1.24(10-2±0.52(10-2, p=0.416) or treatment (0ppmF: 1.49(10-2±0.53(10-2; 1150ppmF: 1.21(10-2±0.42(10-2; p=0.093), when evaluated independently. Considering the limitations of this in vitro study, the presence and severity of fluorosis in enamel do not appear to affect its susceptibility to dental erosion. Fluoride treatment was not effective in preventing the development of dental erosion in both sound and fluorotic enamel substrates under our experimental conditions.
Resumo Este estudo in vitro foi testou a hipótese de que o tratamento com flúor pode prevenir a erosão dentária no esmalte fluorótico de diferentes severidades. O objetivo deste estudo foi: investigar o efeito protetor dos fluoretos contra a erosão e abrasão simuladas no esmalte fluorótico. Seguiu um desenho fatorial 3×2, considerando a) severidade da fluorose em 3 níveis: hígido (TF0, Índice Thylstrup-Fejerskov), suave (TF1-2), moderada (TF3-4); b) tratamento com flúor: 0 (controle negativo) e 1150ppmF. Molares humanos com as três severidades de fluorose (n=16, cada) foram selecionados e distribuídos aleatoriamente para os dois tratamentos com flúor (n=8). Blocos de esmalte (4×4mm) foram preparados a partir de cada dente e submetidos a um modelo de ciclo de erosão dentária, por 10 dias. O protocolo de ciclagem diária consistiu em seis desafios erosivos de 5 minutos (1% de ácido cítrico, pH 2,4), intercalados por seis períodos de imersão em saliva artificial e três tratamentos de 2 minutos com 0 ou 1150ppmF. O volume do esmalte perdido foi calculado subtraindo o perfil superficial 3D obtido por microtomografia antes e depois da ciclagem. A ANOVA de dois fatores não mostrou interação significativa entre a severidade da fluorose e o tratamento com flúor (p = 0,691) e nenhum efeito significativo para a severidade da fluorose (TF0 média+/desvio padrão: 13,5(10-2±0,42(10-2, TF1-2: 1,50(10-2±0,52(10-2, TF3-4: 1,24(10-2±0,52(10-2, p=0,416) ou tratamento (0: 1,49(10-2±0,53(10-2; 1150ppmF: 1,21(10-2±0,42(10-2, p=0,093), quando avaliados independentemente. Considerando as limitações deste estudo in vitro, a presença e severidade da fluorose no esmalte não parece afetar sua suscetibilidade à erosão dentária. O tratamento com flúor não foi eficaz na prevenção do desenvolvimento da erosão dentária em esmalte hígido e fluorótico, sob as condições experimentais utilizadas.
RESUMO
ABSTRACT Objective: To find out what the acid-base resistant zone (ABRZ) is and the mechanism of its formation. Material and Methods: This systematic review was based on the search of laboratory studies in which selfetching adhesive systems were used. The electronic database PubMed was used for the search. The search began on August 2021 and ended on June 2022. We have analyzed the materials and methods of each research and entered them in the appropriate tables to give a clearer assessment of the obtained results. Results: This systematic review included 15 full-text articles published from 2011 to 2019. The ABRZ is formed on both dentine and enamel. On dentine, the ABRZ is formed only when using self-etching adhesive systems; on the enamel, on the contrary, the step of preliminary etch and rinse contributes to the formation of a thicker ABRZ. The functional monomer MDP and fluorine increase the thickness of the ABRZ and provide a hybrid layer /ABRZ boundary without defects and erosions. Conclusion: Self-etching adhesive systems ensure the creation of an ABRZ resistant to acid-base tests. This phenomenon can provide the resistance of tooth tissues to demineralization, and therefore increase their resistance to caries.