RESUMO
BACKGROUND:The impact of anterior cervical surgery on the sagittal balance parameters of the cervical spine is gradually being paid attention to.Currently,there is a lack of clear and feasible clinical guidelines for the selection of surgical methods for two-level cervical spondylosis,aiming to find the most suitable fixation method that is more beneficial for this type of patient. OBJECTIVE:To compare the effects of different fusion devices for anterior cervical decompression on the changes of cervical sagittal parameters after surgery for adjacent two-level cervical spondylotic myelopathy. METHODS:A total of 44 patients with adjacent two-level cervical spondylotic myelopathy underwent anterior cervical discectomy and fusion from March 2018 to September 2020 in Liaocheng People's Hospital were retrospectively analyzed in the study,and they were divided into zero-p group(23 cases)and cage group(21 cases).All patients underwent anteroposterior X-ray,three-dimensional CT reconstruction and MRI examination before operation.At the last follow-up,the anteroposterior X-ray films of cervical spine were taken.The sagittal balance parameters of the cervical spine were measured before and after surgery,including cervical lordotic angle(C2-7 Cobb),C2-C7 sagittal vertical axis,segmented lordotic angle and T1 slope.The surgical time,intraoperative bleeding,last follow-up intervertebral fusion,and postoperative swallowing disorders were recorded,and Japanese Orthopaedic Association score on the patient was evaluated before and after surgery.The changes in cervical sagittal parameters before and after surgery were calculated and their differences were compared between the two groups. RESULTS AND CONCLUSION:(1)Both groups of patients successfully completed the surgery and received follow-up.The zero-p group had shorter surgical time and less intraoperative bleeding compared to the cage group,but the difference was not statistically significant(P>0.05).(2)The incidence rate of postoperative swallowing disorders in the cage group(7/21,33%)was higher than that in the zero-p group(3/23,13%),and the difference was statistically significant(P<0.05).(3)At the last follow-up,the clinical efficacy of the two groups was the same;all patients had bone fusion.Comparison within the group showed that the sagittal parameters of the cervical spine in both groups improved compared to before surgery(P<0.05).There was no statistically significant difference in sagittal parameters between groups(P>0.05),and there was no statistically significant difference in changes in C2-C7 sagittal vertical axis,C2-7 Cobb angle,and T1 slope between the two groups(P>0.05).However,the segmented lordotic angle changes in the zero-p group were smaller than those in the cage group,and the difference was statistically significant(P<0.05).(4)It is indicated that the use of zero-p and titanium plate combined with cage during anterior cervical discectomy and fusion surgery can effectively improve cervical sagittal balance.Titanium plate combined with cage intervertebral fusion can better reconstruct the patient's cervical lordosis and curvature.The selection of fusion devices should also comprehensively consider the occurrence of surgical complications.
RESUMO
@#The sternum is the pivotal component of the thoracic cavity. It is connected with the clavicle and ribs on the upper part and both sides respectively, and plays an important role in protecting the stability of the chest wall. Sternal resection usually results in a large segmental chest wall defect that causes the chest wall to float and requires sternal reconstruction. This paper reports a 62 years male patient with thymic squamous cell carcinoma with sternal metastasis, who underwent thymotomy, sternal tumor resection and autologous lilum graft combined with sternal reconstruction by titanium plate after relevant examination was completed and surgical contraindications were eliminated. The patient was followed up for 6 months, the respiratory and motor functions were normal and the thoracic appearance was good.
RESUMO
ObjectivesTo compare the clinical efficacy and complications of anatomic locking titanium plate (hereinafter referred to as “titanium plate screw”) and intramedullary nail in the treatment of distal tibial fractures.Methods From September 2019 to September 2021, 32 patients diagnosed with AO-A fracture of distal tibia at Sun Yat-sen Memorial Hospital of Sun Yat-sen University were included in this study. Of these, 15 cases were treated with titanium plate screws and 17 cases were treated with intramedullary nails. General surgical indexes, fracture healing time and postoperative operation were compared between the two groups.ResultsAll patients were followed up for 10 to 20 months, with an average of 12 months. The operative time and intraoperative fluoroscopy times of intramedullary nail group were longer than those of titanium plate screw group, but the preoperative waiting time and hospitalization days was less or were fewer than those of titanium plate screw group, the difference was statistically significant (P < 0.05). There was no significant difference in fracture healing time between the two groups (P> 0.05). At 6 weeks after operation, VAS scores in both groups were lower than those before operation, with statistically significant difference (P<0.05). There was no significant difference in VAS scores between the intramedullary nail group and the titanium plate screw group (P> 0.05). AOFAS scores 6 months after surgery, ankle joint motion and complication rate 1 year after surgery in intramedullary screw group were better than those in titanium plate screw group, and the differences were statistically significant (P< 0.05). There was no significant difference in AOFAS scores between the two groups at 1 year after operation (P> 0.05).ConclusionTitanium plate screw and intramedullary nail are both effective methods for the treatment of distal tibial AO-A fracture, and there is no significant difference in long-term clinical efficacy. Intramedullary nail has fewer soft tissue complications, less impact on ankle motion, faster recovery and higher safety, while titanium plate screw has a higher probability of postoperative soft tissue infection. We suggest that in clinical work, preoperative evaluation of patients should be done well. Under the premise of grasping the indications, intramedullary nail has fewer complications and certain advantages.
RESUMO
Objective:To observe the difference in the effect of simple titanium plate internal fixation and titanium plate internal fixation combined with titanium nail intermaxillary traction in the treatment of jaw fractures and their impact on the oral and maxillofacial function of patients.Methods:From August 2016 to May 2021, 94 patients with jaw fractures admitted to the Department of Stomatology, Linyi Central Hospital, Shandong (supplementing the gender, age range and average age of the patients), were divided into 47 cases in the control group, and the titanium plates were used alone, combined operation group 47 cases, titanium plate internal fixation combined with intermaxillary traction with titanium nails. The changes of oral and maxillofacial function and fracture healing were measured before operation and 3 months after operation, and the perioperative indicators and postoperative complications were recorded.Results:Three months after operation, the scores of maxillofacial function, mouth function and masticatory function in the combined operation group (0.52±0.09 points, 0.67±0.12 points, 0.58±0.08 points) were significantly lower than those in the control group (1.05±0.21 points, 1.14±0.22 points, 1.02±0.21 points) ( t=15.90, 12.86, 13.42, P<0.05). The effective rate of the combined operation group was 95.74% (45/47), which was significantly higher than that of the control group (80.85%, 38/47) (χ 2=5.05, P<0.05); there was no significant difference in operation time and hospitalization time between the groups ( P>0.05), the fracture healing time in the combined surgery group (65.02±7.06) d was significantly shorter than that in the control group (82.69±10.25) d ( t=9.73, P<0.05). The postoperative complication rate of combined treatment group was 6.38% (3/47), which was significantly lower than the control group 21.28% (10/47) (χ 2=4.37, P<0.05). Conclusions:In the treatment of jaw fractures, titanium plate internal fixation combined with titanium nail intermaxillary traction treatment can significantly improve the oral and maxillofacial function of patients, promote postoperative fracture healing, improve curative effect and reduce the incidence of complications compared with simple titanium plate internal fixation.
RESUMO
Objective@#To propose a digitally modified and guided bone regeneration technique supported by a nonabsorbable titanium plate and explore its effect on vertical bone regeneration.@*Methods@#A total of 8 patients with severe vertical bone defects in the edentulous area who wanted to be treated with implants were included in this study. A digitally modified and guided bone regeneration technique supported by a nonabsorbable titanium plate (fence technique) was used for bone augmentation. The patient's jaw, dentition, and soft tissue data were obtained for prosthetically guided implantation and bone regeneration. After virtual bone augmentation, a model of the jaw was obtained through 3D printing technology, and the titanium plate was bent accordingly. The virtual design was transformed through the template (including the base template and the attachment of a periosteal screw and bone block), so the actual osteogenesis space consistent with the design could be realized in the operation. Guided bone regeneration was performed according to the improved procedure and technical process. After 6 ~ 8 months of bone augmentation, cone beam CT was taken to evaluate the effect of bone augmentation. The implant was implanted according to the initial implant design, and bone tissue was obtained for HE and Masson staining. @* Results@#After 6 ~ 8 months of bone augmentation, the vertical linear bone increment reached (5.44 ± 1.73) mm. The implant was implanted according to the initial implant design, and the bone tissue was obtained for histological examination to show the formation of new bone.@*Conclusion@#Digital improved fence technique can simplify the preoperative and surgical procedures, and obtain good vertical bone augmentation results. In short, it is a kind of vertical bone augmentation technique worth popularizing and applying.
RESUMO
BACKGROUND: Axial symptoms often occur in patients after posterior cervical single-door vertebroplasty. Some studies have proposed a modified surgical method to remove C3 lamina and retain cervical semisacinous muscle on C2 spinous to reduce the occurrence of axial symptoms after surgery. OBJECTIVE: To compare the clinical effects, cervical motion range and curvature of C3 laminectomy and mini-titanium plate fixation after single-door vertebroplasty. METHODS: Totally 43 patients with cervical spondylosis were selected from the General Hospital of Southern Theater Command of PLA from June 2012 to June 2017, including 25 males and 18 females. Among them, 27 patients underwent C3-6 or C3-7 single-door mini-titanium fixation vertebroplasty as fixation group and 16 patients underwent C4-6 or C4-7 single-door mini-titanium fixation vertebroplasty through posterior approach after C3 laminectomy as resection group. Preoperatively, 6 months postoperatively and at final follow-up, JOA score, cervical motion range, and C2-7 Cobb angle were compared between the two groups. This study was approved by the Ethics Committee of General Hospital of Southern Theater Command of PLA. RESULTS AND CONCLUSION: (1) All 43 patients successfully underwent the operation without vascular or spinal cord injury. (2) JOA score was higher in the two groups at postoperative 6 months and final follow-up than that preoperatively (P 0.05). (3) Motion range in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). Motion range was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (4) C2-1 Cobb angle in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). C2-7 Cobb angle was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (5) There was no hypersensitivity, rejection or immune response in the two groups. (6) Results indicate that C3 laminectomy and mini-titanium plate fixation have the same effect on improving neurological function, but the removal of C3 lamina can more effectively prevent the reduction of postoperative cervical motion range and curvature.
RESUMO
BACKGROUND: In the treatment of central cord syndrome, it is difficult to predict the degree of nerve recovery because of the different speeds and degrees of nerve recovery. The treatment of central cord syndrome, especially the treatment methods, is still controversial. OBJECTIVE: To investigate the factors influencing the prognosis of central cord syndrome treated with drug therapy and titanium plate fixation. METHODS: A retrospective analysis of 243 patients with central cord syndrome who were admitted to Changzhou Second People’s Hospital Affiliated to Nanjing Medical University from June 2012 to June 2017 was performed. According to therapeutic schedule, the patients were divided into two groups. In the titanium plate group, 152 cases were treated with titanium plate fixation, and 91 cases in the drug treatment group were treated with drugs. All patients signed the informed consent. This study was approved by the Hospital Ethics Committee. Neurological function was assessed using American Spinal Injury Association and Japanese Orthopedic Association criteria. American Spinal Injury Association and Japanese Orthopedic Association scores were recorded for all patients within 24 hours of treatment, 6, 12, and 24 months after treatment. The age, treatment, and gender factors were included in the prognostic single factor analysis at 6 and 24 months after treatment of cervical spinal cord syndrome. After that, age, treatment and gender factors were included in the multivariate logistic regression analysis of prognosis at 6 and 24 months after treatment of cervical spinal cord syndrome. RESULTS AND CONCLUSION: (1) 243 patients were followed up for at least 24 months and recovered well after treatment. (2) American Spinal Injury Association and Japanese Orthopedic Association scores were lower in the drug treatment group than in the titanium plate group at 6 months after treatment (P=0.001 2, 0.000 0). However, American Spinal Injury Association and Japanese Orthopedic Association scores were higher in the drug treatment group than in the titanium plate group at 24 months after treatment (P=0.037 4, 0.047 8). (3) The prognosis of central cord syndrome after 6 months of treatment was related to the age and treatment of the patients (P=0.007 2, P < 0.000 1). Moreover, drug treatment and age greater than 50 years were associated with poor prognosis in patients with central cord syndrome at 6 months after treatment (P=0.043, P=0.010). (4) The prognosis at the 24-month follow-up of central cord syndrome was correlated with the patient’s treatment (P=0.004 3). Moreover, the drug treatment was associated with prognosis at the 24-month follow-up of central cord syndrome (P=0.021). (5) Results indicated that at the time of titanium plate fixation, the recovery rate was faster in 6 months than that of drug treatment. However, at 24 months follow-up after treatment, the recovery effect of drug treatment was better than that of titanium plate fixation. At 6 months after treatment, the prognosis was related to the treatment mode and age, but at 24 months after treatment, the prognosis was related to the treatment mode.
RESUMO
OBJECTIVE@#To evaluate the short-term curative effects of ARCH titanium plate fixation combined with expansive single open-door laminoplasty (EOLP) in treating cervical spondylotic myelopathy (CSM).@*METHODS@#EOLP with ARCH titanium plate as internal fixation material was applied in 32 patients with CSM from January to December 2016. There were 23 males and 9 females with an average age of 64.5 years ranging from 39 to 82 years. The course of disease ranged from 6 to 24 months with an average of 13.1 months. The clinical efficacy was evaluated by Japanese Orthopaedic Association (JOA) scoring method, which included upper and lower limb motor function, limb sensory function and bladder function. The sagittal diameter of the narrowest segment of vertebral canal was measured by imaging data before operation and 6 months after operation, and the improvement rate was calculated to determine the decompression effect.@*RESULTS@#All the patients were followed up from 6 to 20 months with an average of 12.2 months. Preoperative symptoms of 32 patients were improved to varying degrees, the JOA score increased from 9.78±1.34 before operation to 12.94±1.16 at 6 months after operation, the improvement rate of JOA was(44.09±11.06)% (<0.01). The spinal canal was significantly enlarged, the sagittal diameter of the narrowest vertebral canal was increased from (8.47±0.60) mm preoperatively to (12.51±0.78) mm 6 months postoperatively, the improvement rate was (48.27±11.81)% (<0.01). No loosening, displacement, rupture or "re-closure" of the internal fixator was found during the follow-up.@*CONCLUSIONS@#ARCH titanium plate fixation combined with EOLP in the treatment of CSM can significantly reduce the possibility of "re-closure" and other related postoperative complications and the short-term clinical efficacy is satisfactory.
Assuntos
Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Placas Ósseas , Vértebras Cervicais , Laminoplastia , Estudos Retrospectivos , Doenças da Medula Espinal , Titânio , Resultado do TratamentoRESUMO
Objective To explore the application of 3D printing templates for titanium plate contouring (TrPC) in pelvic ring surgery.Methods From May 2016 to June 2018,12 patients with pelvic ring injury were treated by internal fixation with 24 titanium plates at Department of Orthopedics and Trauma,Sanshui People's Hospital.After solid digital models of the damaged pelves of the patients were reconstructed from their CT images via software,the hollowed ones were created with the wall thickness of 1.2 mm.After the models of damaged pelves were restored to be intact,the templates for titanium plate contouring were designed based on the area of fixation and manufactured via a stereo lithography apparatus.The total manufacturing time and material consumption of 3D printing TTPC were recorded and compared with those of 3D printing solid and hollow models.Before operation,the titanium plates were contoured according to the templates.The time for preoperative shaping the plate and the time for intraoperative preparing the plate before installation were recorded.After operation,all patients underwent CT scan again for reconstruction of 3D models of the postoperative pelves which were compared with their corresponding preoperative ones in the software.Matta criteria were used to evaluate the pelvic reduction and Majeed criteria to evaluate the functional recovery 6 months after operation.Results All patients were followed up for 6 to 28 months (average,16.3 months).The total manufacturing time and material consumption of 3D printing a TTPC were significantly less than those of 3D printing a solid or hollow model (P < 0.05).The time for preoperative shaping the plate was 12.8 ± 4.1 minutes and the time for intraoperative preparing the plate was 1.4 ± 1.1 minutes.The average deviation between the preoperative 3D models and the postoperative ones was 1.4 ± 1.1 mm.According to the Matta criteria for pelvic reduction,6 cases were excellent,4 good and 2 satisfactory.According to the Majeed criteria,the pelvic functions were excellent in 7 cases,good in 4,and fair in one.Conclusion Application of 3D printing TTPC in the surgery for pelvic ring injury is advantageous in lowering the costs of 3D printing and reducing the intraoperative time for contouring the titanium plate,leading to satisfactory outcomes.
RESUMO
Objective:To observe the efficacy of laminoplasty with reconstructing of cervical extensor attachment on cervical spondylotic myelopathy (CSM) involving C2 segment. Methods:From March, 2014 to January, 2017, 46 cases with CSM involving C2 accepted surgery in our hospital. They were divided into two groups according to the surgical methods. Control group (n = 21) accepted traditional laminoplasty, while observation group (n = 25) accepted laminoplasty with extensor muscle attachment point reconstruction. They were assessed with Japanese Orthopaedic Association (JOA) spinal scores, cervical range of motion (ROM), cervical curvature, areas of posterior cervical muscles and axial symptoms. Results:There was no significant difference at operative time and intraoperative blood loss (t < 0.863, P > 0.05) between groups. After surgery, the JOA score increased in both groups (F > 24.961, P < 0.001), but there was no significant difference between two groups (t < 0.282, P > 0.05). ROM varied little in both groups (F < 0.931, P > 0.05). The cervical neutral position curvature decreased in the control group (F = 8.241, P < 0.01), but not in the observation group (F = 2.705, P > 0.05). The areas of posterior muscle decreased in control group (t = 2.678, P < 0.05), but not in the observation group (t = 0.854, P > 0.05). The incidence of axial symptoms was less in the observation group than in the control group (Z = -2.192, P < 0.05). Conclusion:Laminoplasty could relieve the spinal compression at C2 segment and promote the recovery of neurological function, and it can do better in cervical curvature and posterior cervical muscle atrophy as combination with reconstruction of extensor muscle attachment, to reduce the axial symptoms.
RESUMO
<p><b>OBJECTIVE</b>To compare the clinical effects between anterior cervical discectomy and fusion(ACDF) combined with anterior cervical corpectomy and fusion(ACCF) and cervical posterior single open-door laminoplasty with mini-titanium plate fixation in treating three-segment cervical spondylotic myelopathy.</p><p><b>METHODS</b>The clinical data of 63 patients (39 males and 24 females) with three-segment cervical spondylotic myelopathy underwent surgical treatment from March 2014 to March 2016 were retrospectively analyzed. Among them, 43 cases were treated by ACDF combined with ACCF(anterior group), and 20 cases were treated by cervical posterior single open-door laminoplasty with mini-titanium plate fixation(posterior group). Operative time, intraoperative blood loss, postoperative complications were compared between two groups. And according to JOA score to evaluate the clinical effect.</p><p><b>RESULTS</b>All the patients were follow-up from 16 to 40 months with an average of 25.8 months. Operative time of anterior group and posterior group were (123.70±6.21) min and(118.70±5.41) min, respectively, there was no significant difference between two groups(>0.05). Intraoperative blood loss of anterior group and posterior group were (85.23±7.51) ml and (107.18±9.41) ml, respectively, there was significant difference between two groups(<0.05). In anterior group, axial symptoms occurred in 6 cases, dysphagia in 1 case, and no C₅ nerve root palsy, hoarseness and choking cough were found, the incidence rate of complication was 16.3%(7/43); and in posterior group, axial symptoms occurred in 5 cases, C5 nerve root palsy in 1 case, and no dysphagia, hoarseness and choking cough were found, the incidence rate of complication was 30.0%(6/20); there was significant defference in incidence rate of complication between two group(<0.05). At 1 week after operation and final follow-up, the JOA scores of anterior group were obviously better than that of posterior group(<0.05).</p><p><b>CONCLUSIONS</b>Above-mintioned two surgical treatment for cervical spondylotic myelopathy can provide instantly stability, the method of ACDF combined with ACCF was obviously better that of the method of cervical posterior single open-door laminoplasty in intraoperative blood loss, the incidence rate of complications, clinical effect.Thus, for the treatment of three-segment cervical spondylotic myelopathy, the method of ACDF combined with ACCF would be firstly chosen.</p>
RESUMO
Objective To comparatively analyze the clinical effects of volar locking compression titanium plate and external fixation trestle for treating unstable type C distal radius fracture.Methods The clinical data of 78 patients with unstable type C distal radius fracture treated in this hospital from March 2014 to February 2016 were analyzed retrospectively.The patients were di-vided into the volar locking plate group and external fixattio trestle group according to different treatment methods,39 cases in each group.The clinical efficacies of different treatment methods were observed.Results The postoperative bleeding volume,operation time,hospitalization time and fracture healing time in the external fixation group were less than those in the volar locking plate frac-ture group(P<0.05).The palmar tilt angle,ulnar inclination angle and radial height on postoperative 3 d,6 weeks and 24 mopnths in the volar locking plate group were significantly better than those in the external fixation group(P<0.05).The last follow-up showed that the palmar flexion degree,dorsiflexion degree,VAS score and Gartland-Werley score had no statistical difference be-tween the two groups(P>0.05).The incidence rates of postoperative incision infection,carpal tunnel syndrome and thumb extensor tendon rupture had no statistical differences between the two groups(P>0.05).Conclusion The two kinds of treatment method all have better clinical curative effect.The external fixation trestle treatment has the advantages of shorter operation time and shorter hospitalization time,while the volar locking compression titanium plate can reset the fractures under direct vision,is significantly su-perior to the external fixation trestle treatment in the aspects of recovery of palmar tilt angle,ulnar inclination angle and radial height,and is more suitable for the patients with unstable type C distal radius fracture..
RESUMO
Objective To investigate the conceptual feasibility and biomechanical advantages of our self-designed screw hole filler for a lateral bamboo-raft-type titanium locking plate in a digital model of proximal tibial fracture using linear statics finite element analysis.Methods A nut-type screw hole filler was designed.Four different idealized finite element models of proximal tibial fracture fixed by a lateral bamboo-raft-type anatomic locking plate were established on the basis of three-dimensional CT reconstruction and digital orthopedic techniques.The first one was assembled with the filler and stabilized fibula,the second with stabilized fibula but without the filler,the third with the filler and unstabilized fibula,and the fourth with unstabilized fibula but without the filler.Linear statics finite element analyses were conducted for the 4 models under the same 26 groups of loads.The 4 models were compared in terms of maximum relative displacement on fracture surface,average relative displacement on fracture surface,maximum Von Mises stress of internal fixation,maximum contact stress on fracture surface,maximum contact stress between plate and tibial surface,maximum contact pressure on fracture surface,and maximum contact pressure between plate and tibial surface.Outcomes of the analyses for the 4 models were harvested and treated with Wilcoxon Signed Ranks Test.Results There were significant differences between using filler and not using filler in maximum relative displacement on fracture surface,average relative displacement on fracture surface,maximum Von Mises stress of internal fixation and maximum contact pressure between plate and tibial surface (P < 0.05),but no significant difference was found in maximum contact pressure on fracture surface (P > 0.05).The model assembled with the filler and unstabilized fibula led to the greatest improvement in maximum Von Mises stress of internal fixation (P < 0.05).Conclusions Since use of nut-type screw hole filler may increase the contact pressure between plate and bone surface,reduce the maximum Von Mises stress of internal fixation,the maximum displacement of the whole model,and the relative and average displacements on fracture surface,but has insignificant effect on the contact pressure on fracture surface,it improves the biomechanical performance of internal fixation.The filler deserves further study.
RESUMO
Objective To investigate the clinical effect of titanium plate fixation for posterior one-door-open laminoplasty in the treatment of elderly patients with multi segmental cervical spondylotic myelopathy,to analyze the advantages and disadvantages of open cervical spine fixation under fixed mode.Methods Thirty-eight cases with multi segmental cervical spondylotic myelopathy treated in China Meitan General Hospital with titanium plate fixation and posterior cervical laminoplasty from January 2011 to January 2014 were selected as the research object,a retrospective analysis was made on the clinical data of the patients.Group A with 20 cases was fixed with open-door segment C3~C6;18 cases in group B were treated with open door fixation of segmental C3~C7.X-ray,CT,MR were examined in preoperative time,JOA score was performed at 7d and 6 months after surgery.Door opening angle of CT cross section,the anteroposterior diameter(APD)of the spinal canal and shaft fusion were measured.MR spinal cord signal changes and the degree of compression,cervical spine activity, postoperative pain,the initial pain degree,VAS score and remission time differences were evaluated and analyzed.Results The incision healed in group A and B after the operation,the incidence rate of axial symptoms was 30%(6/20)in group A and 38.9%(7/18)in group B,the difference was statistically significant(P= 0.043); postoperative JOA scores were(12.2 ± 2.3)% points and(12.8 ± 1.7)points respectively in group A and B,the improvement rate of nerve function were(49.31 ± 14.5)% and(47.93 ±18.6)%,respectively in group A and B,the change rate of cervical spine were(-2.37±1.88)% and(-2.65 ±1.23)%,respectively in group A and B,the difference was not statistically significant(P>0.05).Initial VAS scores were(3.2±1.3)points and(4.1±1.7)points respectively in group A and B,the pain time were(55.2±28.5)d and(24.9± 19.2)d respectively,and complete remission time were(93.2± 47.3)d and(152.5 ± 59.3)d respectively,the differences between the two groups were statistically significant(P=0.028,P=0.031) .There were no change in opening angle,the anteroposterior diameter of spinal canal and spinal canal expansion rate at 7 days after surgery,but the door had bony fusion,without lamina closure phenomenon,and the seveity of spinal cord compression was improved at 6 months after surgery, compared with the preoperative time.Conclusion To obtain the ideal clinical treatment effect on titanium plate fixation of open-door laminoplasty in the treatment of multilevel cervical myelopathy in the elderly patients,the characteristics of the patient's own disease and selective fixation section should be taken into consideration.
RESUMO
Objective The TiO2 nanotube arrays,fabricated on the surface of orthopedics,was characterized,to provide carrier for orthopedics plant surface modification or coating,and seek a new way for the prevention and treatment of orthopedics plant infection.Methods By adjusting certain parameters,TiO2 nanotube arrays were fabricated on orthopedic titanium plate surface using the method of anodic oxidation,with glycerol system as electrolyte,orthopedics titanium plate as anode,and platinum electrode as cathode.TiO2 nanotube arrays were characterized.The element composition of TiO2 nanotube arrays was analyzed by X-ray photoelectron spectroscopy (XPS),and the morphological changes of TiO2 nanotube arrays was observed at high temperature (300 ℃) by X-ray diffractomer (XRD).Results With glycerol system as electrolyte,TiO2 nanotube array with diameter of about 100 to 200 nm and the length less than 3μm can be fabricated on orthopedic titanium plate surface using anodic oxidation of 24 h.The surface of orthopedic titanium plate was changed from silver white to deep blue in the macroscopic view.The TiO2 nanotube array on orthopedics titanium plate surface was mainly composed of Ti element (75.88%),O element (20.16%),and F element (3.96%) by XPS analysis.TiO2 nanotube arrays morphology was stable when it was heated to 300 ℃ by muffle furnace.Conclusions The method of anodic oxidation can be applied to manufacture TiO2 nanotubes array on titanium plate surface.The array with stable morphology,the inner hollow shape,the bottom sealing,and a large specific surface area,can withstand high temperature,which can provide carrier for orthopedics plant surface modification or coating.
RESUMO
Objective To evaluate the clinical efficiency of posterior unilateral open-door laminoplasty and leverage titanium plate internal fixation in the treatment of cervical spondylotic myelopathy ( CSM ) with multi-segmental spinal stenosis.Methods Between Mar 2011 and May 2015, 25 patients with multi-segmental CSM with multi-segmental spinal stenosis were treated by posterior unilateral open-door laminoplasty and leverage fixation .There were 16 males and 9 females, whose mean age was 60.6 ±9.9 years during the surgery.The change of clinical symptoms and signs was recorded during follow-up,and they all received X-ray and MRI.In all the patients, the preoperative and postoperative neurological function, the cervical curvature,cervical vertebra tube volume and axial symptoms were measured , recorded and analyzed. There was statistically significant difference (P<0.05) in the mean Japanese Orthopaedic Association (JOA) score, and Visual Analogue Scale ( VAS) .Results All the 25 patients were followed up for more than 6 months ( 6-24 months ) .No symptoms of C5 nerve root were found in our series .According to the JOA score and VSA score ,the neurological functions of each patient were significantly improved .The preoperative JOA score was 10.16 ±1.35 and the improvement rate 61.24%. There was statistically significant difference between the preoperative VSA score and the postoperative one (6.68 ±1.12 vs 2.32 ±0.84) ( P<0.05).The preoperative and postoperative meansurement of the spinal vertebrai canal diameter was (9.22 ±2.01) and (15.64 ±2.08) mm, respectively,so there was statistically significant difference (P <0.05), indicating that the cavical spinal canal was increased after operation .Conclusion Leverage titanium plate internal fixation can effectively help maintain the expanded vertebral canal after unilateral open -door laminoplasty ,reduce the incidence of postoperative axial symptoms , and maintain the cervical physical curvature .
RESUMO
Maxillomandibular fractures usually require intermaxillary fixation as a means to immobilize and stabilize the fracture and to re-establish proper occlusion. Arch bars or intermaxillary fixation screws cannot be used for edentulous patients or for patients who have poor dental health. Here, we present a case of repeated intermaxillary fixation failure in a patient weak alveolar rigidity secondary to multiple dental implants. Because single-point fixation screws were not strong enough to maintain proper occlusion, we have used Y-shaped plates to provide more rigid anchoring points for the intermaxillary wires. We suggest that this method should be considered for patients in whom conventional fixation methods are inappropriate or have failed.
Assuntos
Humanos , Implantes Dentários , Técnicas de Fixação da Arcada Osseodentária , Mandíbula , Reconstrução MandibularRESUMO
Objective To observe the spinal stability of regrafting the posterior ligamentous complex after spinal canal tumor resection. Methods The data of 43 cases with spinal canal tumor in our department from July 2008 to July 2013 were retrospectively analyzed,who were fixed the free of the lamina by mini titanium-plate. Results The operation time was 130 to 220 min,the average time was 150 min. The blood loss volume was 200 to 750 mL,with average volume 340 mL. All patients were followed up for 6 to 42 months. No iatrogenic spinal cord injury nor complications such as artery injury,spinal cord and spinal nerve root local anomalies hydrops occurred. By Flexion-extension radio-graphs,regrafting of the posterior ligamentous complex after the resection of spinal cord tumors preserved spinal mobility well. Conclusion The mini titanium-plate fixation treatment of spinal canal tumor has good superiority and clinical feasibility by regrafting the posterior ligamen-tous complex and reconstructing the spinal stability.
RESUMO
Objective To investigate the role of titanium plate fixation for sternum closure after off-pump coronary artery bypass grafting (OPCABG) in elderly patients.Methods A total of 120 elderly patients who accepted OPCABG were randomly divided into two groups.The control group (n =60) received wire to fix the sternum,and the experimental group (n=60) received titanium plate combined with wire to fix the sternum.The chest closure time,the rate of postoperative incision pain,the rate of sternal dehiscence and sternal re-fixation between two groups were observed and recorded.Results The rates of postoperative incision pain,sternal dehiscence,sternal re-fixation was lower in experimental group than in control group [11.7%(7/60) vs.38.3%(23/60),3.3%(7/60) vs.13.3%(8/60),1.7%(1/60) vs.11.7%(7/60),x2 =11.378,3.927,4.821 respectively all P<0.05].The chest closure time was longer in experimental group than in control group [(39±5)min vs.(30±2) min,x2 =13.386,P<0.05].Conclusions Titanium fixation plate combined with wire for sternum closure can increase the stability of sternum fixation,reduce the postoperative pain and sternal dehiscence,and then decrease the risk of sternal re-fixation,but delay sternal closure of OPCABG in the elderly.
RESUMO
BACKGROUND: The fibular free flap has been used as the standard methods of segmental mandibular reconstruction. The objective of mandibular reconstruction not only includes restored continuity of the mandible but also the recovery of optimal function. This paper emphasizes the advantage of the fibular free flap reconstruction over that of locking mandibular reconstruction plate fixation. METHODS: The hospital charts of all patients (n=20) who had a mandibular reconstruction between 1994 and 2013 were retrospectively reviewed. Eight patients had plate-only fixation of the mandible, and the remaining 12 had vascularized fibular free flap reconstruction. Complications and outcomes were reviewed and compared between the 2 groups via statistical analysis. RESULTS: Overall complication rates were significantly lower in the fibular flap group (8.3%) than in the plate fixation group (87.5%; p =0.001). Most (7/8) patients in the plate fixation group had experienced plate-related late complications, including plate fracture or exposure. In the fibular flap group, no complications were observed, except for a single case of donor-site wound dehiscence (1/12). CONCLUSION: The fibular free flap provides a more stable support and additional soft tissue support for the plate, thereby minimizing the risk of plate-related complications. Fibular free flap is the most reliable option for mandibular reconstruction, and we believe that the flap should be performed primarily whenever possible.