Prótesis Totales Digitales 3D fabricadas por CAD-CAM: Revisión bibliográfica / 3D Digital Denture Complete manufactured by CAD-CAM: Literature review

El artículo se centra en la aplicación de tecnología CAD/CAM en la odontología, específicamente en la fabricación de prótesis dentales totales. Este avance ha transformado la forma en que se diseñan y producen estas prótesis, emergiendo la fabricación de ella mediante capas sucesivas a base de tecnologías de impresión 3D como la estereolitografía, el procesamiento digital de luz y la pantalla de cristal líquido. En la presente revisión se profundizó en aspectos clínicos y biomecánicos, evaluando la retención, adaptación de la base, resistencia a la flexión y límite elástico de las prótesis. Los resultados indican que las prótesis digitales ofrecen mejor retención y adaptación en comparación con los métodos convencionales, aunque no hay diferencias estadísticamente significativas en resistencia a la flexión. También se exploraron aspectos económicos, destacando la reducción de costos y ahorro de tiempo en el proceso clínico con el enfoque digital. Los pacientes experimentan mayor satisfacción con prótesis impresas en 3D en términos de comodidad y eficiencia. Sin embargo, existen limitaciones, como la dificultad en la evaluación estética de prótesis monocromáticas, además de la dependencia de técnicas convencionales para evaluar la funcionalidad del paciente. La tecnología CAD/CAM ha revolucionado la fabricación de prótesis dentales totales, ofreciendo ventajas y beneficios. Este avance tecnológico promete mantener su relevancia en la comunidad científica y odontológica.

The article focuses on the application of CAD/CAM technology in dentistry, specifically in the manufacturing of complete dentures. This advance has transformed the way these dentures are designed and produced, with the manufacturing of layers emerging through successive 3D printing technologies such as stereolithography, digital light processing and liquid crystal display. In the present review clinical and biomechanical aspects were delved into, evaluating retention, adaptation of the base, resistance to flexion and elastic limit of the prostheses. The results indicate that digital prostheses offer better retention and adaptation compared to conventional methods, although there are no statistically significant differences in bending resistance. Economic aspects were also explored, highlighting the cost reduction and time savings in the clinical process with the digital approach. Patients experience greater satisfaction with 3D printed dentures in terms of comfort and efficiency. However, there are limitations, such as the difficulty in the aesthetic evaluation of monochromatic dentures, in addition to the dependence on conventional techniques to evaluate the patient's functionality. CAD/CAM technology has revolutionized the manufacturing of total dental prostheses, offering advantages and benefits. These technological advance promises to maintain its relevance in the scientific and dental community.

Percepción de la calidad de vida y satisfacción en pacientes portadores de dentadura parcial removible: Revisión de Literatura Sistematizada / Perception of quality of life and satisfaction in patients with removable partial denture: Systematized Literature Review

RESUMEN Introducción: Diversos autores mencionan que una correcta planificación de una dentadura parcial removible incrementa la satisfacción de los pacientes, en cuanto a estética y función. En casos donde la estética es prioritaria, se plantea un diseño sin retenedores visibles. En estos casos, la elaboración de la dentadura no demanda mayores costos, basta con establecer el diagnóstico correspondiente valorando los pilares, eje de inserción, áreas retentivas entre otros y establecer el diseño más conveniente según sea el caso. Objetivo: El objetivo fue realizar una revisión sistematizada sobre la percepción de la calidad de vida y satisfacción en pacientes portadores de dentaduras parciales removibles. Materiales y métodos: Se incluyeron 13 artículos científicos mediante la metodología PRISMA para la identificación, revisión e inclusión de los textos que formaron parte del estudio. Se seleccionaron tomando en cuenta el título, resumen y objetivo. Fueron considerados: revisiones sistemáticas, metaanálisis, estudios comparativos y revisiones de literatura que evaluaran diferentes criterios acerca de la satisfacción en pacientes portadores de dentadura parcial removible. Los artículos fueron leídos íntegramente, se analizaron objetivos, metodología y conclusión de cada uno de ellos, y posteriormente fueron analizados. Resultados: La queja más común fue el resultado estético, seguida del dolor durante la masticación. Se recomienda ofrecer un control periódico de la prótesis parcial removible para evaluar el correcto funcionamiento y ajuste de esta. Conclusión: El éxito del tratamiento con dentaduras parciales removibles se puede optimizar mediante el diagnóstico preciso del caso, considerando experiencias previas del paciente y teniendo en cuenta sus expectativas. Asimismo, comprender ciertos factores como su estilo de vida, nivel socioeconómico, estado de salud periodontal, personalidad, puede disminuir el riesgo de fracaso futuro del tratamiento con dentaduras parciales removibles.

ABSTRACT Introduction : Various authors mention that correct planning of a removable partial denture can offer adequate satisfaction in terms of aesthetics and function. In cases where aesthetics is a priority, a design without visible clasps is proposed. In addition, this elaboration does not demand higher costs, if the practitioner reaches the corresponding diagnosis and establishes the most convenient design for each specific case. Objective: The objective was to carry out a systematic review on the perception of quality of life and satisfaction in patients with removable partial dentures. Materials and methods: Thirteen scientific articles were included using the PRISMA methodology for the identification, review and inclusion of the texts that were part of this study. The articles were selected considering the title, abstract and objective. Systematic reviews, meta-analyses, comparative studies, and literature reviews that included criteria about satisfaction in patients with removable partial dentures where evaluated. The articles were read in their entirety: the objectives, methodology and conclusions of each one of them were analyzed. Results: The most common complaint was the aesthetic result, followed by pain during chewing. It is recommended to offer periodic control of the removable partial denture to evaluate its correct functioning and fit. Conclusion: The success of the treatment with removable partial dentures can be evaluated through the precise diagnosis of the case, considering previous experiences and taking into account the expectations of the patient. Also, understanding the patient's lifestyle, socioeconomic level, periodontal health status, and personality, may be factors that allow the practitioner to reduce the risk of future failure for the treatment with removable partial dentures.

Resultado de las sobredentaduras superiores según número de implantes dentales en pacientes edéntulos totales / Outcome of maxillary overdentures according to the number of dental implants in full edentulous patients

RESUMEN Objetivo: Realizar una revisión de la literatura sobre el resultado de las sobredentaduras maxilares según el número de implantes dentales en pacientes edéntulos totales. Materiales y Métodos: Se realizó una búsqueda bibliográfica sistematizada en los motores de búsqueda Pubmed, Scopus y Web of Science y luego de establecer los criterios y filtros de la misma, se utilizaron 6 artículos. De los 6 artículos analizados, 4 fueron estudios de tipo ensayo clínico aleatorizado, 1 estudio prospectivo y 1 estudio retrospectivo. Resultados: Los resultados clínicos de las sobredentaduras maxilares, basados en el número de implantes sobre los cuales fueron soportadas, y comparando los protocolos más difundidos e investigados como los de All-on-4 y All-on-6, fueron similares. Se consideran óptimos, confiables, exitosos y longevos, sin diferencia significativa según el número de implantes dentales colocados. Conclusiones: Las sobredentaduras maxilares soportadas por 4 o 6 implantes fueron técnicas de tratamiento confiables, y ofrecen resultados comparables. Las complicaciones fueron limitadas y los resultados óptimos y duraderos.

ABSTRACT Objective: To review the literature on the outcome of maxillary overdentures according to the number of dental implants in edentulous patients. Materials and Methods: A systematic bibliographic search was carried out in the Pubmed, Scopus and Web of Science search engines and, after appliying the criteria and filters, 6 articles were used. Of the 6 articles analyzed, 4 were randomized clinical trial type studies, 1 prospective study and 1 retrospective study. Results: The results of maxillary overdentures, according to the number of implants used to support them, and comparing the most widespread and researched protocols such as All-on-4 and All-on-6, were similar. They are considered optimal, reliable, successful and long-lived, with no significant difference within the number of dental implants placed. Conclusions: Maxillary overdentures supported by 4 or 6 implants were reliable, and exhibit comparable results. The complications were limited, and the results were optimal and enduring.

Percepción de la calidad de vida y satisfacción en pacientes portadores de dentadura parcial removible: Revisión de Literatura Sistematizada / Perception of the

Introducción: Diversos autores mencionan que una correcta planificación de una dentadura parcial removible incrementa la satisfacción de los pacientes, en cuanto a estética y función. En casos donde la estética es prioritaria, se plantea un diseño sin retenedores visibles. En estos casos, la elaboración de la dentadura no demanda mayores costos, basta con establecer el diagnóstico correspondiente valorando los pilares, eje de inserción, áreas retentivas entre otros y establecer el diseño más conveniente según sea el caso. Objetivo: El objetivo fue realizar una revisión sistematizada sobre la percepción de la calidad de vida y satisfacción en pacientes portadores de dentaduras parciales removibles. Materiales y métodos: Se incluyeron 13 artículos científicos mediante la metodología PRISMA para la identificación, revisión e inclusión de los textos que formaron parte del estudio. Se seleccionaron tomando en cuenta el título, resumen y objetivo. Fueron considerados: revisiones sistemáticas, metaanálisis, estudios comparativos y revisiones de literatura que evaluaran diferentes criterios acerca de la satisfacción en pacientes portadores de dentadura parcial removible. Los artículos fueron leídos íntegramente, se analizaron objetivos, metodología y conclusión de cada uno de ellos, y posteriormente fueron analizados. Resultados: La queja más común fue el resultado estético, seguida del dolor durante la masticación. Se recomienda ofrecer un control periódico de la prótesis parcial removible para evaluar el correcto funcionamiento y ajuste de esta. Conclusión: El éxito del tratamiento con dentaduras parciales removibles se puede optimizar mediante el diagnóstico preciso del caso, considerando experiencias previas del paciente y teniendo en cuenta sus expectativas. Asimismo, comprender ciertos factores como su estilo de vida, nivel socioeconómico, estado de salud periodontal, personalidad, puede disminuir el riesgo de fracaso futuro del tratamiento con dentaduras parciales removibles.

Introduction : Various authors mention that correct planning of a removable partial denture can offer adequate satisfaction in terms of aesthetics and function. In cases where aesthetics is a priority, a design without visible clasps is proposed. In addition, this elaboration does not demand higher costs, if the practitioner reaches the corresponding diagnosis and establishes the most convenient design for each specific case. Objective: The objective was to carry out a systematic review on the perception of quality of life and satisfaction in patients with removable partial dentures. Materials and methods: Thirteen scientific articles were included using the PRISMA methodology for the identification, review and inclusion of the texts that were part of this study. The articles were selected considering the title, abstract and objective. Systematic reviews, meta-analyses, comparative studies, and literature reviews that included criteria about satisfaction in patients with removable partial dentures where evaluated. The articles were read in their entirety: the objectives, methodology and conclusions of each one of them were analyzed. Results: The most common complaint was the aesthetic result, followed by pain during chewing. It is recommended to offer periodic control of the removable partial denture to evaluate its correct functioning and fit. Conclusion: The success of the treatment with removable partial dentures can be evaluated through the precise diagnosis of the case, considering previous experiences and taking into account the expectations of the patient. Also, understanding the patient's lifestyle, socioeconomic level, periodontal health status, and personality, may be factors that allow the practitioner to reduce the risk of future failure for the treatment with removable partial dentures.

Resultado de las sobredentaduras superiores según número de implantes dentales en pacientes edéntulos totales / dental implants

Objetivo: Realizar una revisión de la literatura sobre el resultado de las sobredentaduras maxilares según el número de implantes dentales en pacientes edéntulos totales. Materiales y Métodos: Se realizó una búsqueda bibliográfica sistematizada en los motores de búsqueda Pubmed, Scopus y Web of Science y luego de establecer los criterios y filtros de la misma, se utilizaron 6 artículos. De los 6 artículos analizados, 4 fueron estudios de tipo ensayo clínico aleatorizado, 1 estudio prospectivo y 1 estudio retrospectivo. Resultados: Los resultados clínicos de las sobredentaduras maxilares, basados en el número de implantes sobre los cuales fueron soportadas, y comparando los protocolos más difundidos e investigados como los de All-on-4 y All-on-6, fueron similares. Se consideran óptimos, confiables, exitosos y longevos, sin diferencia significativa según el número de implantes dentales colocados. Conclusiones: Las sobredentaduras maxilares soportadas por 4 o 6 implantes fueron técnicas de tratamiento confiables, y ofrecen resultados comparables. Las complicaciones fueron limitadas y los resultados óptimos y duraderos.

Objective: To review the literature on the outcome of maxillary overdentures according to the number of dental implants in edentulous patients. Materials and Methods: A systematic bibliographic search was carried out in the Pubmed, Scopus and Web of Science search engines and, after appliying the criteria and filters, 6 articles were used. Of the 6 articles analyzed, 4 were randomized clinical trial type studies, 1 prospective study and 1 retrospective study. Results: The results of maxillary overdentures, according to the number of implants used to support them, and comparing the most widespread and researched protocols such as All-on-4 and All-on-6, were similar. They are considered optimal, reliable, successful and long-lived, with no significant difference within the number of dental implants placed. Conclusions: Maxillary overdentures supported by 4 or 6 implants were reliable, and exhibit comparable results. The complications were limited, and the results were optimal and enduring.

Effectiveness of commercially available denture adhesives on retention of mandibular complete denture in resorbed mandibular ridge: an in vitro study / Efectividad de los adhesivos disponibles comercialmente sobre la retención de prótesis removibles completas mandibulares en el reborde mandibular reabsorbido: un estudio in vitro

Background: Denture adhesives are alternatives used to improve retention, stability, comfort and satisfaction in patients with complete dentures. Evidence on the effectiveness of denture adhesives on resorbed mandibular ridges is scarce. Among the many commercially available denture adhesives, the ideal material for the severely resorbed mandibular ridge remains in dispute. Objective: The aim of this study was to evaluate the effectiveness of different quantities of four commercially available denture adhesives on the retention of mandibular complete dentures in severely resorbed ridges. Materials and Methods: A resorbed edentulous mandibular ridge model was manufactured in acrylic resin. A denture base was made and three loops were attached to it. Four commercially available denture adhesives (Fixodent, Perlie White, Fiftydent and Polident) were tested in amounts of 0.2 g, 0.4 g, 0.6 g, 0.8 g and 1.0 g. The acrylic resin model was evenly moistened with 1 ml of water and a weighted amount of adhesive material was applied to the denture base. The universal testing machine engaged the loops fixed on the denture base and applied the vertical displacement force. The maximum vertical displacement force values were recorded for each denture adhesive material at different amounts. Statistical calculation was performed using Kruskal Wallis with Bonferroni post hoc correction. Results: Statistically significant differences were observed in the mean values of the vertical displacement force for adhesive amounts of 0.2 g, 0.4 g, 0.6 g and 1.0 g (p<0.05) between the four adhesive materials tested. Statistically significant differences were observed when four denture adhesives were compared to each other in different amounts (p<0.05). Statistically significant differences were observed between different amounts for each of four denture adhesives (p<0.05). Conclusions: Among the four materials tested, Polident showed greater effectiveness at 0.6 g and 0.8 g, Fittydent at 0.6 g, 0.8 g and 1 g, Fixodent at 0.4 g and 0.6 g and Perlie White at 1 g and 0.8g quantity to resist vertical displacement. forces on the severely resorbed mandibular crest. Using an appropriate amount of denture adhesive allows for proper retention of the denture; Replacement of this adhesive is necessary once a day.

Introducción: Los adhesivos para prótesis dentales son alternativas utilizadas para mejorar la retención, la estabilidad, la comodidad y la satisfacción en los pacientes con prótesis completas. La evidencia sobre la efectividad de los adhesivos para prótesis dentales en los rebordes mandibulares reabsorbidos es escasa. Entre los muchos adhesivos para prótesis dentales disponibles comercialmente, sigue estando en disputa cuál es el material ideal para el reborde mandibular severamente reabsorbido. Objetivo: El objetivo de este estudio fue evaluar la efectividad de diferentes cantidades de cuatro adhesivos para prótesis dentales disponibles comercialmente sobre la retención de prótesis dentales completas mandibulares en reborde mandibular reabsorbido severamente. Materiales y Métodos: Se fabricó un modelo de reborde mandibular edéntulo reabsorbido en resina acrílica. Se hizo una base para la prótesis y se le colocaron tres bucles. Se probaron cuatro adhesivos para dentaduras postizas disponibles comercialmente (Fixodent, Perlie White, Fiftydent y Polident) en cantidades de 0,2 g, 0,4 g, 0,6 g, 0,8 g y 1,0 g. El modelo de resina acrílica se humedeció uniformemente con 1 ml de agua y se aplicó la cantidad correspondiente de material adhesivo sobre la base de la dentadura. La máquina de prueba universal enganchó los bucles fijados en la base de la dentadura postiza y aplicó la fuerza de desplazamiento vertical. Se registraron los valores máximos de fuerza de desplazamiento vertical para cada material adhesivo para dentaduras postizas en diferentes cantidades. El cálculo estadístico se realizó utilizando Kruskal Wallis con corrección post hoc de Bonferroni. Resultado: Se observaron diferencias estadísticamente significativas en los valores medios de la fuerza de desplazamiento vertical para cantidades de 0,2 g, 0,4 g, 0,6 g y 1,0 g (p<0,05) entre los cuatro materiales adhesivos para prótesis dentales probados. Se observaron diferencias estadísticamente significativas cuando se compararon cuatro adhesivos para prótesis dentales entre sí en diferentes cantidades (p<0,05). Se observaron diferencias estadísticamente significativas entre diferentes cantidades en los cuatro adhesivos para prótesis (p<0,05). Conclusión: De los cuatro materiales probados, Polident mostró mayor efectividad a 0,6 g y 0,8 g, Fittydent a 0,6 g, 0,8 g y 1 g, Fixodent a 0,4 g y 0,6 g y Perlie White a 1 g y 0,8 g para resistir fuerzas de desplazamiento vertical en la cresta mandibular severamente reabsorbida. El uso de una cantidad adecuada de adhesivo para dentaduras postizas permite una retención adecuada de la dentadura postiza; El reemplazo de este adhesivo es necesario una vez al día.

Accuracy of Digital Impression Taking in Partial Dentures: an in Vitro Study on the Degree of Adaptation of Rests / Precisão da Tomada de Impressão Digital em Próteses Parciais: um Estudo in Vitro sobre o Grau de Adaptação de Apoios

The objective of the study is to assess the precision of digital impressions in removable partial dentures through an in vitro study on the degree of abutment adaptation. A Kennedy Class III model with a prosthetic space between elements 43 and 47, featuring niches in the mesio-occlusal and cingulum regions, respectively. Conventional impressions were performed in subgroups CONC and CONM, while digital scanning was conducted in subgroups DIGC and DIGM. Simplified cobalt-chromium alloy frameworks were manufactured using the lost-wax technique on plaster and resin models. The degree of adaptation of the structures was evaluated by impressing the niches with condensation silicone, qualitatively assessing perforations, and quantitatively measuring the mold thickness under a stereomicroscope after cross-sectioning. Regular adaptation was more prevalent among the experimental groups. CONC showed a higher mean degree of abutment adaptation, while CONM had a lower mean. The study factors, impression technique, and type of abutment seat, were not statistically significant, with no interaction among the variables. Occlusal and cingulum abutment measurement points, in both impression techniques, showed no statistically significant difference. Digital scanning yielded better results in terms of abutment adaptation, with smaller average gaps between the abutment seat and the metal structure, making it clinically acceptable. The type of abutment seat and the impression technique did not have a statistically significant impact on abutment adaptation. The impression technique does not represent a factor influencing the adaptation of occlusal and cingulum abutments at different measurement points. (AU)

O Objetivo do estudo é valiar precisão da impressão digital em próteses parciais removíveis, por meio de um estudo in vitro sobre o grau de adaptação dos apoios. Um modelo Classe III de Kennedy com espaço protético entre o elemento 43 e 47, nichos na região mésio-oclusal e na do cíngulo. Foram realizadas impressões convencionais nos subgrupos CONC e CONM, e digitalização nos subgrupos DIGC e DIGM, onde estruturas simplificadas de liga de Co-Cr foram fabricadas usando a técnica de fundição perdida nos modelos de gesso e resina. O grau de adaptação das estruturas foi avaliado pela impressão dos nichos com silicone de condensação, qualitativamente as perfurações e quantitativamente a espessura do molde em um estereomicroscópio após seção transversal. A adaptação regular foi mais prevalente entre os grupos experimentais. CONC maior média do grau de adaptação do apoio, enquanto CONM menor média. Os fatores do estudo, técnica de impressão e tipo de assento de apoio, não foram estatisticamente significativos, sem interação entre as variáveis. Pontos de medição de apoio oclusal e de cíngulo, em ambas as técnicas de impressão, sem diferença estatisticamente significativa. A digitalização mostrou melhores resultados em relação ao grau de adaptação dos apoios, com menores lacunas médias entre o assento de apoio e a estrutura metálica, sendo clinicamente aceitável. O tipo de assento de apoio e a técnica de impressão não interferem estatisticamente na adaptação dos apoios. A técnica de impressão não representa um fator que influencie a adaptação de apoios oclusais e de cíngulo em diferentes pontos de medição. (AU)

Metodologias ativas no ensino da Prótese Parcial Removível durante a COVID-19: um relato de experiência da Universidade Federal da Paraíba / Metodologías activas em la enseñanza de Prótesis Parcial Removible durante laCOVID-19: relato de experiencia de la Universidade Federal da ParaíbaResumen / Active methodologies in teaching the Removable Partial Denture course during COVID-19: an experience report

Este estudo objetiva apresentar a experiência do componente curricular Prótese Parcial Removível (PPR) da Universidade Federal da Paraíba com a implementação de metodologias ativas, como gamificação, sala de aula invertida e case-based learning(CBL), no ensino à distância, visando sedimentar o aprendizado quanto ao planejamento de arcos parcialmente desdentados. As atividades foram realizadas de forma síncrona e assíncrona, utilizando como casos os esquemas bidimensionais e fotografias de arcosparcialmente desdentados, baseando-se no conceito de sala de aula invertida, no qual os alunos apresentavam os casos e os professores atuavam como mediadores nas discussões. Observou-se um grande engajamento e participação ativa dos alunos na construção do seuconhecimento. A inserção dessas metodologias no ensino remoto funcionou como um eixo motivacional para os alunos, fomentando a aprendizagem e estimulando o desenvolvimento de competências no planejamento em PPR previamente ao atendimento clínico (AU).

Este estudio tiene como objetivo presentar la experiencia del componente curricular Prótesis Parcial Removible de la Universidade Federal da Paraíba con la implementación de metodologías activas, como gamificación, aula invertida y aprendizaje basado en casos, en educación a distancia, con el objetivo de consolidar el aprendizaje sobre la planificación de arcadas parcialmente edéntulas. Las actividades se realizaron de forma sincrónica y asincrónica, utilizando diagramas bidimensionales y fotografías de arcos parcialmente edéntulos como casos, basados en el concepto de aula invertida, en la que los estudiantes presentaban los casos y los docentes actuaban como mediadores en las discusiones. Hubo un gran compromiso y participación activa de los estudiantes en la construcción de su conocimiento. La inclusión de estas metodologías en la enseñanza a distancia funcionó como eje motivacional de los estudiantes, favoreciendo el aprendizaje y estimulando el desarrollo de habilidades en la planificación de la Prótesis Parcial Removible previa a la atención clínica (AU).

This study aims to present the experience of RPD course at the Universidade Federal da Paraíba using active methodologies such as gamification, flipped classroom and case-based learning (CBL) in distance learning, aiming to consolidate learning in planningpartially edentulous arches. Activities were carried out synchronously and asynchronously using two-dimensional schemes and photographs of partially edentulous arches as "cases" and based on the concept of the flipped classroom, where students presented the cases and the teachers acted as mediators in the discussions. Excellent engagement and active participation of students in their knowledge construction were observed. The insertion of these methodologies in remote teaching acted as a motivational axis for the students, promoting learning and stimulating development of competences in RPD planning prior to clinical care (AU).

The use of fiberglass posts in dentistry: a literature review / O uso de pinos de fibra de vidro na odontologia: uma revisão de literatura

The choice of retaining material that will replace the lost properties of the tooth, in which it is fragile and with loss of dentin structure, is important. The success of the treatment will depend on the qualities presented in it. Therefore, the objective of this work, through a literature review, is to present the advantages and disadvantages observed in the use of fiberglass post intraradicular retainer. This paper reviews the most relevant articles on the specificities presented in the fiberglass post retaining material, published in the period (2003 to 2020). The bibliographic search was performed in PubMed, Lilacs, Scielo, Google Scholar databases. In view of the selected articles on the subject, it is possible to observe the authors' acceptance of the application of the use of retainers, highlighting that in the treatment of cases with extensive coronary destruction, the aim is to have the functional and retentive capacity returned, in addition to the tension resistance. Therefore, theThe use of fiberglass posts in weakened teeth is effective as the material of choice. In cases that require reconstruction and return of tissue integrity, it has sufficient advantages for its selection. Despite the disadvantages it has, these do not outweigh the benefits to the point of making its use unfeasible. However, knowing when, where and how to treat is always important in any procedure for a satisfactory final outcome.

A escolha do material retentor que irá substituir as propriedades perdidas do dente, no qual este se apresenta de forma fragilizada e com perca de estrutura dentinária é importante. O sucesso do tratamento irá depender das qualidades apresentadas no mesmo. Sendo assim, o objetivo deste trabalho por meio de uma revisão de literatura é apresentar as vantagens e desvantagens observadas no uso do retentor intrarradicular de pino de fibra de vidro. Este trabalho revisa os artigos mais relevantes sobre as especificidades apresentadas no material retentor de pino de fibra de vidro, publicadas no período (2003 até 2020). A busca bibliográfica foi realizada nos bancos de dados PubMed, Lilacs, Scielo, Google Scholar. Diante dos artigos selecionados referentes ao tema, pode-se observar a aceitação dos autores sobre a aplicação do uso de retentores, destacando-se que no tratamento de casos com destruição coronária extensa o intuito é dispor da devolução da capacidade funcional, retentiva, além da resistência a tensão. Portanto, a utilização de pinos de fibra de vidro em dentes fragilizados apresenta efetividade como material de escolha. Em casos que necessitam de reconstrução e devolução de sua integridade tecidual, possui consigo vantagens suficientes para sua seleção. Apesar das desvantagens que possui, essas não se sobrepõem aos benefícios a ponto de tornarem inviáveis ao seu uso. Entretanto, saber quando, onde e como tratar é sempre importante em qualquer procedimento para um desfecho final satisfatório.

Digital repair for a patient with limited mouth opening: a case report and literature review / 口腔疾病防治

Objective@#To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma.@*Methods@#This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.@*Results@#The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration.@*Conclusion@#Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Effect of printing orientation on physical and mechanical properties of 3D printing prosthodontic base resin materials / 北京大学学报(医学版)

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

The effects of biologically oriented preparation technique on periodontal plaque colonization and inflamma-tory factor expression in gingival crevicular fluid / 实用口腔医学杂志

Objective:To study the effects of biologically oriented preparation technique(BOPT)on periodontal plaque colonization and inflammatory factor expression in gingival crevicular fluid(GCF).Methods:102 patients with chronic periodontitis were randomly divided into 2 groups(n=51).The subjects in control group received traditional tooth preparation,while those in observation group re-ceived BOPT.The probing depth,modified plaque index,gum papillary index,marginal bone resorption and modified gingival groove bleeding index were measured and compared between the 2 groups.The GCF was collected at the restoration site before and after 6 month restoration,the levels of tumor necrosis factor-α,interleukin-6 and matrix metalloproteinase 8 were measured at different time periods.Results:6 months after surgery,there was no significant difference in near-middle,far-middle and mean bone resorption be-tween the 2 groups(P＞0.05).The restoration periodental indexes were decreased in both groups(P＜0.05),and the modified gingival hemorrhage index,probing depth,gum papilla index and modified plaque index in the observation group were obvious lower than in the control(P＜0.05).The inflammatory factor expression in GCF was significantly decreased in both groups(P＜0.05),and in the obser-vation group was obvious lower than in the control(P＜0.05).Patient comfort,retention function,aesthetics and total score in the ob-servation group was obvious higher than in the control(P＜0.05),but there was no statistically significant difference in chewing func-tion,language function between the 2 groups(P＞0.05).Conclusion:BOPT may improve the restoration level,eliminate the inflamma-tory response of GCF and improve satisfaction in patients with chronic periodontitis.

Clinical application of lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture in the restoration of single anterior tooth loss / 口腔疾病防治

Objective@#To investigate the clinical effect of lithium disilicate glass ceramic cantilever resin-bonded fixed partial dentures (CRBFPDs) on single anterior tooth loss to provide a reference for the selection of restoration methods for single anterior tooth loss.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-two patients with less than two anterior teeth with monomaxillary loss were included in this study. After 6 months, 1 year, 2 years, and 3 years, the aesthetic and functional effects of the restorations and the periodontal health status were evaluated, and the visual analog scale (VAS) was used to assess patient satisfaction.@*Results@#During the observation period, the connector fractured in one case within 3 months. One case had debonded within 2 years. The aesthetic restoration effect of all lithium disilicate glass ceramic CRBFPDs was categorized as Class A. The periodontal health was good, there was no clinical absorption in the soft and hard tissues of the abutment or subbridge, periodontal status according to the evaluation indices was classified as class A, and the total satisfaction rate of the patient was 100%.@*Conclusion@#For single anterior tooth loss patients, lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture can achieve the restoration effect of less invasion, better adhesion, aesthetics, comfort and good biocompatibility. With high patient satisfaction, it can be considered an ideal restoration method for replacing a single anterior tooth.

Influence of heat treatment technology on mechanical properties of 3D printed titanium alloy specimens / 中国组织工程研究

BACKGROUND:In recent years,additive manufacturing(also known as 3D printing)has gradually become the mainstream method for producing titanium alloy brackets for removable partial dentures.Heat treatment,as an important method to improve the mechanical properties of 3D printed titanium alloys,has become a current hot topic of attention.OBJECTIVE:To summarize the main heat treatment technologies currently applied to 3D printed titanium alloy specimens(including annealing,solution aging,hot isostatic pressing,and other heat treatments)and their effects on the mechanical properties and microstructure of 3D printed titanium alloy specimens,providing a theoretical basis for improving the heat treatment technology of removable partial denture titanium alloy supports.METHODS:A computer search was conducted on research materials related to 3D printed titanium alloy heat treatment in databases such as CNKI,PubMed,and ScienceDirect.The search period was from 2012 to 2023.A total of 61 articles were selected based on inclusion and exclusion criteria.RESULTS AND CONCLUSION:(1)Using conventional annealing techniques to treat 3D printed titanium alloy specimens,keeping them at 500-900 ℃ for 2-4 hours,can effectively increase the elongation of 3D printed titanium alloy specimens.(2)Compared to conventional annealing techniques,solid solution aging treatment is more complex,and the titanium alloy specimens after solid solution aging treatment exhibit outstanding yield strength and better corrosion resistance.However,the 3D printed titanium alloy specimens after solid solution aging treatment have no advantage in terms of ductility.(3)Hot isostatic pressing treatment can reduce the internal defects of 3D printed titanium alloy specimens,significantly increase the elongation of 3D printed titanium alloy specimens,and increase their fatigue life.(4)Rapid heat treatment can significantly improve the elongation of 3D printed titanium alloy specimens,and the speed is faster.In terms of elongation improvement and heat treatment efficiency,it has more advantages than conventional annealing in the past.(5)The improvement of elongation of 3D printed titanium alloy specimens by cyclic heat treatment exceeds that of conventional annealing.Cyclic heat treatment can significantly improve the grain structure of 3D printed titanium alloy specimens,but the heat treatment time is too long and the efficiency is low.

Clinical evaluation of the effect of two resilient attachments retaining mandibular over-denture supported by implant and natural tooth on the supporting structures

Aim: This study aimed to assess the effect of two resilient attachments used for retention of mandibular over-denture supported by an implant and a natural tooth on the supporting structures throughout a one-year follow-up period. Materials and methods: Fourteen patients with maxillary completely edentulous arches and only one standing natural mandibular canine were selected. Each patient received a dental implant with 10.5 mm length and 3.8 mm diameter at the canine region of the contralateral side of the mandible. The patients were divided into two groups according to the type of attachment used (n=7); BC group included patients who received mandibular over-dentures retained by bar clip attachment supported by an implant on one side and a natural tooth on the other side. BS group involved patients who received a mandibular implant splinted to the natural canine by bar joint attachment utilizing soft liner material. The patients of both groups were rehabilitated with conventional maxillary complete dentures. Clinical and radiographic assessment were performed immediately after over-denture delivery, six and twelve months from denture insertion. Clinical evaluation involved gingival index. Radiographic evaluation included measuring mesial, distal, buccal and lingual bone height differences. Results: BC group recorded significantly higher bone loss compared to BS group around both dental implants and natural teeth. Conclusion: Considering the limitations of this study, it could be concluded that soft liner retained over-dentures are more effective in decreasing bone resorption around the implants and natural teeth compared to clip retained over-dentures.

Manifestaciones orales en pacientes cubanos con COVID-19 hospitalizados y no hospitalizados: Análisis transversal a través de una encuesta / Oral Manifestations in Hospitalized and Non-Hospitalized Cuban Patients with COVID-19: A Cross-Sectional Analysis through a Survey

Introduction: COVID-19 continues to drive research aimed at elucidating the disease's behavior and clinical aspects for improved diagnosis. Objective: To describe oral manifestations reported through a survey by dentate and denture-wearing Cuban individuals hospitalized due to confirmed COVID-19 infection. Methods: A cross-sectional descriptive study was conducted through a survey, involving Cuban individuals aged 18 years and above, confirmed COVID-19 positive by PCR. Exclusions encompassed smokers, alcoholics, regular medication users, those with poor oral hygiene, and individuals with pre-existing oral manifestations. A questionnaire was administered to over a thousand individuals, of which 264 met the criteria. Variables related to COVID-19 infection and oral hygiene were assessed. Data were processed using SPSS, adhering to ethical principles. Results: The study comprised 264 participants with an average age of 39.96 years. Xerostomia emerged as the most prevalent oral manifestation (40.2 por ciento), followed by mandibular pain, TMJ, or bone pain (18.9 por ciento), and non-dental mouth pain (12.5 por ciento). Xerostomia was more prevalent in the 35 to 39 age group, while mandibular pain predominated in the 50 to 54 age group. No statistically significant evidence was found for dentate individuals or denture wearers, but significance was observed for those requiring hospitalization, exhibiting painless tongue lesions, single ulcers, and painful tongue lesions. Conclusions: Xerostomia was the most prevalent oral manifestation, followed by mandibular pain, TMJ or bone pain, and non-dental mouth pain. A statistically significant association was noted between the need for hospitalization and certain oral manifestations. The use of dentures was not significantly related to the studied manifestations(AU)

Introducción: La COVID-19 continúa generando interés en investigaciones que buscan esclarecer el comportamiento de la enfermedad y sus aspectos clínicos para facilitar el diagnóstico. Objetivo: Describir las manifestaciones orales informadas por individuos cubanos dentados, con prótesis, que fueron hospitalizados al dar positivo por COVID-19. Métodos: Se llevó a cabo un estudio descriptivo transversal a través de una encuesta con una muestra de individuos cubanos mayores de 18 años, infectados por COVID-19 y confirmados mediante PCR. Se excluyeron fumadores, alcohólicos, usuarios regulares de medicamentos, personas con mala higiene bucal y aquellos con manifestaciones bucales previas a la infección. Se aplicó un cuestionario a más de mil individuos, de los cuales 264 cumplieron con los criterios. Se utilizaron variables relacionadas con la infección por COVID-19 y la higiene bucal. Los datos se procesaron con SPSS, respetando los principios éticos. Resultados: El estudio incluyó a 264 participantes con una edad promedio de 39,96 años. La xerostomía fue la manifestación bucal más prevalente (40,2 percent), seguida por el dolor mandibular, ATM o hueso (18,9 percent) y el dolor de boca no dental (12,5 percent). La xerostomía fue más frecuente en el grupo de 35 a 39 años, mientras que el dolor mandibular predominó en el grupo de 50 a 54 años. No se encontró evidencia estadística significativa para pacientes dentados o portadores de prótesis, pero sí para aquellos que necesitaron hospitalización, con lesiones en la lengua sin dolor, úlceras únicas y lesiones en la lengua con dolor. Conclusiones: La xerostomía fue la manifestación bucal más prevalente, seguida por el dolor mandibular, ATM o hueso, y el dolor de boca no dental. Se observó una asociación estadísticamente significativa entre la necesidad de hospitalización y ciertas manifestaciones bucales. No se encontró significativo el uso de prótesis en relación con las manifestaciones estudiadas(AU)

Is scanning under rubber dam isolation a feasible approach for the execution of indirect restorations? / O escaneamento sob isolamento absoluto é uma técnica viável para execução de restaurações indiretas?

Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)

Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)

Utility of Panoramic Radiographs in the Screening of Individuals with Edentulous Arches: A Need-Analysis Study

Abstract Objective: To evaluate the utility of panoramic radiographs in pre-prosthetic screening of edentulous arches. Material and Methods: Panoramic radiographs taken for three years were retrospectively analyzed. Observations from the radiographs shall be categorized and classified into either of the two categories, namely: 'findings with minimal impact on denture fabrication' and 'findings which affect denture fabrication and require further evaluation.' Anatomic variations, jaw pathologies, and residual ridge resorption patterns were assessed. Results: This study included the initial screening of 23,020 panoramic radiographs, out of which 505 (showing either one or both edentulous arches) were included for the study purpose. The age range of the subjects was from 21 to 94 years. 52.6% of the radiographs showed positive findings. More than half of the radiographs belonged to the males (52.5%). Hyperpneumatization of the maxillary sinus, crestal position of the mental foramen, and retained root fragments were the most common entities noted in the radiographs. Changes in the mental foramen were significantly higher in males than females (p=0.002). Conclusion: Observations from this study showed that panoramic radiographs have high utility for screening edentulous arches, and they should be used in routine clinical practice before denture fabrication.

Anti-biofilm effectiveness of protocols for cleaning complete dentures in hospitalized patients: a randomized controlled trial

Abstract Denture biofilm acts as a potential reservoir for respiratory pathogens, considerably increasing the risk of lung infections, specifically aspiration pneumonia, mainly 48h after hospital admission. The establishment of a straightforward, affordable, and applicable hygiene protocol in a hospital environment for the effective control of denture biofilm can be particularly useful to prevent respiratory infections or reduce the course of established lung disease. Objectives To evaluate the anti-biofilm effectiveness of denture cleaning protocols in hospitalized patients. Methodology The maxillary complete dentures (MCDs) of 340 hospitalized participants were randomly cleaned once using one of the following 17 protocols (n=20): brushing with distilled water, toothpaste, or neutral liquid soap (controls); immersion in chemical solutions (1% sodium hypochlorite, alkaline peroxide, 0.12% or 2% chlorhexidine digluconate), or microwave irradiation (650 W for 3 min) combined or not with brushing. Before and after the application of the protocols, the biofilm of the intaglio surface of the MCDs was evaluated using two methods: denture biofilm coverage area (%) and microbiological quantitative cultures on blood agar and Sabouraud Dextrose Agar (CFU/mL). Data were subjected to the Wilcoxon and Kruskal-Wallis tests (α=0.05). Results All 17 protocols significantly reduced the percentage area of denture biofilm and microbial and fungal load (P<0.05). The highest percentage reductions in the area of denture biofilm were observed for 1% hypochlorite solution with or without brushing and for 2% chlorhexidine solution and microwave irradiation only in association with brushing (P<0.05). The greatest reductions in microbial and fungal load were found for the groups that used solutions of 2% chlorhexidine and 1% hypochlorite and microwave irradiation, regardless of the association with brushing (P<0.05). Conclusions A single immersion for 10 min in 1% sodium hypochlorite, even in the absence of brushing, proved to be a straightforward, rapid, low-cost, and effective protocol for cleaning the dentures of hospitalized patients.

Atividade antifúngica de nanofibras de policaprolactona/nistatina: estudo in vitro e in vivo / Antifungal activity of polycaprolactone/nystatin nanofibers: in vitro and in vivo study

Este estudo avaliou a eficácia in vitro e in vivo de mantas de nanofibras (NF) de policaprolactona (PCL) incorporadas com nistatina (NIS) no tratamento da estomatite protética (EP) em modelos animais. NF foram sintetizadas com diferentes concentrações de NIS, totalizando quatro soluções: PCL puro, PCL/NIS 0,045 g, PCL/NIS 0,090 g e PCL/NIS 0,225 g. A liberação da NIS foi analisada por espectroscopia Ultravioleta-Visível. A capacidade das mantas de inibirem o biofilme de Candida albicans, principal fator etiológico da EP, dividindo-se cinco grupos (N=5) compostos por um grupo com controle de células de C. albicans e com PCL puro, além das três concentrações de NIS. A seguir, foi analisada a viabilidade celular em queratinócitos humanos (HaCat) por meio do teste colorimétrico de resazurina. Cinco grupos foram divididos (N=10): controle celular, PCL puro e as três concentrações de NIS. Em modelos animais de ratos Wistar albinos (N=18), dispositivos palatinos (DP) de resina acrílica foram confeccionados simulando próteses totais e utilizados para a indução da EP. Para isso, DP contaminados com C. albicans foram cimentados na região molar da cavidade bucal dos animais e permaneceram em boca por 48 h. Após esse período, os DP foram removidos e os animais foram divididos em três grupos: (C) controle; (B1) com tratamento por mantas de PCL/NIS 0,045 g e (B2) PCL/NIS 0,225 g, com N=6. Então novos DP, livres de contaminação, foram cimentados na cavidade oral dos animais e permaneceu por mais 48 h. Após esse período, os animais foram eutanasiados, a contagem de UFC/ mL foi realizada e os palatos foram coletados para a análise histológica. A curva padrão de NIS obtida apresentou R2 de 0,99. As três concentrações de NF apresentaram liberação de NIS, com pico no tempo de 6 h e valores de 66,26 µg/ mL para PCL/NIS 0,045 g, de 333,87 µg/ mL para PCL/NIS 0,090 g e 436,51 µg/ mL para PCL/NIS 0,225 g, constantes até o fim do experimento. Os grupos com NIS reduziram em 2,5 log10 de crescimento do biofilme fúngico em relação aos grupos sem tratamento, Controle e PCL, sem diferença estatística significativa. Não foi observada citotoxicidade nas células HaCat, com viabilidade celular de 93,7% para PCL/NIS 0,045 g, 72,6% para PCL/NIS 0,090 g e 72,4% para PCL/NIS 0,225 g. A indução da EP nos três grupos foi possível e, porém, sem redução significativa na contagem de UFC/ mL de C. albicans nos grupos B1 e B2. Na análise histológica do grupo C pôde-se observar infiltração de hifas de Candida na camada queratinizada, presença de células inflamatórias formando micro abscessos e um discreto infiltrado inflamatório no tecido conjuntivo subjacente ao epitélio infectado. Nos grupos B1 e B2 não foram encontradas alterações epiteliais, concluindo-se que as NF demonstraram atividade antifúngica in vitro e foram efetivas na prevenção da penetração de hifas no tecido palatino de animais com DP (AU)

This study evaluated the in vitro and in vivo efficacy of nanofiber (NF) mats of polycaprolactone (PCL) incorporated with nystatin (NIS) in the treatment of denture stomatitis (DS) in animal models. NFs were synthesized with different concentrations of NIS, totaling four solutions: pure PCL, PCL/NIS 0.045 g, PCL/NIS 0.090 g, and PCL/NIS 0.225 g. The release of NIS was analyzed by Ultraviolet-Visible spectroscopy. The ability of the mats to inhibit Candida albicans biofilm, the main etiological factor of DS, was assessed by dividing five groups (N=5) composed of a group with C. albicans cell control and with pure PCL, in addition to the three concentrations of NIS. Next, cell viability in human keratinocytes (HaCat) was analyzed using the resazurin colorimetric test. Five groups were divided (N=10): cell control, pure PCL, and the three concentrations of NIS. In albino Wistar rat animal models (N=18), palatal devices (PD) made of acrylic resin were fabricated to simulate total prostheses and used to induce DS. For this, PD contaminated with C. albicans were cemented in the molar region of the animals' oral cavity and remained in the mouth for 48 hours. After this period, the PDs were removed, and the animals were divided into three groups: (C) control; (B1) treated with PCL/NIS 0.045 g mats, and (B2) PCL/NIS 0.225 g, with N=6. Then new, uncontaminated PDs were cemented in the animals' oral cavity and remained for another 48 hours. After this period, the animals were euthanized, UFC/ mL counts were performed, and the palates were collected for histological analysis. The standard NIS curve obtained showed an R2 of 0.99. The three concentrations of NF showed NIS release, with a peak at 6 h and values of 66.26 µg/ mL for PCL/NIS 0.045 g, 333.87 µg/ mL for PCL/NIS 0.090 g, and 436.51 µg/ mL for PCL/NIS 0.225 g, remaining constant until the end of the experiment. The groups with NIS reduced fungal biofilm growth by 2.5 log10 compared to the untreated groups, Control and PCL, with no significant statistical difference. No cytotoxicity was observed in HaCat cells, with cell viability of 93.7% for PCL/NIS 0.045 g, 72.6% for PCL/NIS 0.090 g, and 72.4% for PCL/NIS 0.225 g. Induction of DS in the three groups was possible; however, there was no significant reduction in UFC/ mL counts of C. albicans in groups B1 and B2. Histological analysis of group C revealed infiltration of Candida hyphae in the keratinized layer, presence of inflammatory cells forming micro abscesses, and a discreet inflammatory infiltrate in the connective tissue underlying the infected epithelium. No epithelial alterations were found in groups B1 and B2, concluding that NFs demonstrated in vitro antifungal activity and were effective in preventing hyphal penetration into palatal tissue in animals with PD.(AU)