Tratamiento de Sonrisa Gingival. Informe de Caso

El recontorneo estético es una cirugía plástica periodontal que tiene como objetivo restablecer una sonrisa más armoniosa de acuerdo al aspecto facial del paciente, el principal motivo para realizar este procedimiento es cuando existe un diagnóstico de una erupción pasiva alterada o sonrisa gingival. La sonrisa gingival es una de las principales preocupaciones de acuerdo a la estética cuando existe una exposición gingival de más de 3 mm en lo cual es justificable realizar el recontorneo estético. Paciente femenino de 28 años de edad, con diagnóstico de erupción pasiva alterada 1B con un seguimiento de 4 meses. El tratamiento consistió en realizar el recontorneo estético para corregir la sonrisa gingival. El recontorneo estético es un procedimiento quirúrgico que se realiza con el objetivo de mejorar la estética del paciente cuando existe una exposición gingival excesiva y para facilitar la armonía de acuerdo a su aspecto facial.

Esthetic recontouring is a periodontal plastic surgery that aims to restore a more harmonious smile according to the patient's facial appearance, since the main reason to perform this procedure is when there is a diagnosis of an altered passive eruption or gingival smile. The gingival smile is one of the main concerns according to aesthetics when there is a gingival exposure of more than 3 mm in which it is justifiable to perform the aesthetic recontouring. 28-year-old female patient with a diagnosis of altered passive eruption 1B with a 4-month follow-up. Treatment consisted of esthetic recontouring to correct the gingival smile. Esthetic recontouring is a surgical procedure performed with the aim of improving the patient's esthetics when there is excessive gingival exposure and to facilitate harmony according to facial appearance.

Aumento de coroa clínica: reparação do desequilíbrio dentogengival com finalidade estética / Clinical crow augmentum: repair of the dentogengival imbalance with aesthetic purpose

O anseio por um sorriso harmônico tem se tornado cada vez maior, uma vez que muitos pacientes relatam desconforto ao sorrir, pois correlacionam a estética do sorriso a problemas de baixa autoestima e em alguns casos suscetibilidade a alterações psicossociais decorrente aos padrões estéticos impostos pela sociedade. O sorriso gengival é uma das grandes queixas relatadas por pacientes. A exposição excessiva de gengiva maxilar pode ser decorrente a fatores gengivais, ósseos, dentários e musculares. Dentre os tratamentos disponíveis para diminuir essa exposição, contamos com cirurgias periodontais, aplicação de toxina botulínica, tratamentos ortodônticos, cirurgia ortognática e reposicionamento labial. O tratamento adequado será definido de acordo com o fator etiológico de cada caso. Diante disso o objetivo do trabalho é realizar um relato de caso sobre aumento de coroa clínica estética. A paciente estava descontente com a exibição de uma grande quantidade gengival ao sorrir. Após estudos clínicos e de imagem o diagnóstico foi de erupção passiva alterada, tipo IB. O tratamento de escolha foi a gengivoplastia associada a remodelação óssea osteotomia e osteoplastia. O tratamento estético vai além de uma boa aparência, através deste trabalho, foi possível evidenciar impactos benéficos que o sorriso harmônico pode acarretar na vida do indivíduo, atendendo suas expectativas e a do cirurgião-dentista(AU)

The desire for a harmonic smile has become increasing, since many patients report discomfort when smiling, as they correlate smile aesthetics to problems of low self-esteem and in some cases susceptibility to psychosocial changes due to aesthetic standards imposed by society. Gummy smile is one of the major complaints reported by patients. Excessive exposure of the maxillary gingiva may be due to gingival, bone, dental and muscular factors. Among the treatments available to reduce this exposure, we have periodontal surgeries, botulinum toxin application, orthodontic treatments, orthognathic surgery and lip repositioning. The appropriate treatment will be defined according to the etiological factor of each case. Therefore, the objective of this work is to carry out a case report on aesthetic clinical crown augmentation. Patient discount with the display of a large amount of gingival when smiling. After clinical and imaging studies, the diagnosis was an altered passive eruption, type IB. The treatment of choice was gingivoplasty associated with bone remodeling, osteotomy and osteoplasty. Final comments and conclusions: The aesthetic treatment goes beyond a good appearance, through this work, it was possible to evidence beneficial impacts that the harmonic smile can have on the individual's life, meeting their expectations and that of the dentist(AU)

Esthetic crown lengthening in the treatment of gummy smile associated with altered passive eruption: A case report

Introduction: Excessive gummy smile affects the aesthetics of the patient and can be the result of several factors, including altered passive eruption, which can be surgically corrected by aesthetic crown lengthening. Case report: 22-year-old female patient, who was treated by aesthetic crown lengthening for the correction of type 1B altered passive eruption. Discussion: Considering the patient's age and periodontal phenotype, surgical correction of the gummy smile by aesthetic crown lengthening shows stable long-term results. Conclusion: Surgically correcting excessive gingival exposure through esthetic crown lengthening can help patients improve the appearance of their smile and regain their self-confidence.

Fluxo de trabalho digital no planejamento de reabilitações orais estéticas: uma revisão de literatura / Digital workflow in the planning of aesthtetic oral rehabilitations: a review of literature

A Odontologia Estética baseia- se em princípios de estética com condutas e técnicas de procedência lógica, como também intuitiva, para planejar um sorriso harmônico. Com seu atual perfil mais conservador atrelado às inúmeras ferramentas disponíveis no mercado, é possível arquitetar procedimentos priorizando o sucesso do tratamento, restabelecendo a função e harmonia, com maior segurança e previsibilidade. O fluxo digital inclui Softwares e equipamentos automatizados que podem otimizar o tempo clínico, apresentando benefícios tanto para o Cirurgião Dentista como para o paciente. Atualmente, o DSD (digital smile design) tem sido utilizado como um recurso de grande destaque para a Odontologia reabilitadora, pois, possibilita um planejamento mais minucioso em cada estágio do tratamento reabilitador estético com o uso de desenhos e linhas de referência para comparações entre as imagens geradas do antes e depois, avaliando se concordam com o planejamento e anseios do profissional e do paciente, ou se serão necessárias modificações. Com isso, o objetivo do presente trabalho foi realizar uma revisão de literatura sobre os avanços do fluxo de trabalho digital em reabilitação oral estética, analisando-se a influência na qualidade do atendimento atrelado ao conforto dos pacientes. Foi realizada uma revisão de literatura nas bases de dados PubMed, Scielo e Wiley Library, utilizando os descritores "Digital Smile Design", "Dental Esthetic," EstheticTreatment". Foram buscados artigos entre 2009 até 2022. Com base na revisão de literatura, foi possível concluir que a técnica se apresenta como uma ferramenta valiosa para tratamentos restauradores, otimizando a compreensão das dificuldades estéticas e aumentando a aceitação do tratamento pelo paciente. E, por trás destes resultados, existem diversas variáveis influenciando-os, como a maior previsibilidade dos procedimentos, reduzindo o tempo para a finalização, além de trabalhos mais conservadores, com estrutura dental preservada.

Esthetic dentistry is based on aesthetic principles with logical, also intuitive procedures and techniques, in order to plan a harmonic smile. With its more consecutive current profile linked to the numerous tools available on the market, it is possible to design procedures prioritizing the success of the treatment restoring the function and harmony with greater safety and predictability. The digital flow includes software and automated equipment that can optimize clinical time, presenting benefits for both, the dental surgeon and the patient. Currently, the DSD (digital smile design) has been used as a resource of great prominence for Rehabilitative Dentistry, because it allows a more detailed planning in each stage of the aesthetic rehabilitation treatment with the use of drawings and reference lines, in order to compare between the images generated before and after the procedure, assessing whether they are in accordance with the planning and desires of the professional and the patient, or if modifications are necessary. With this, the objective of the present work was to carry out a literature review of the advances in the digital workflow in aesthetic oral rehabilitation. Analyzing the influence on the quality of care linked to the comfort of patients. A literature review was carried out in PubMed, Scielo and Wiley Library databases, using the descriptors "Digital Smile Design", "Dental Esthetic", "Esthetic Treatment". Articles were searched between 2009 and 2022. Based on the literature revie, it was possible to conclude that the technique presents itself as a valuable tool for restorative treatments, optimizing the understanding of aesthetic difficulties and increasing the acceptance of the treatment by the patient. And, behind these results, there are several variables influencing them, such as greater predictability of procedures, reducing the time for completion in addition to more conservative works, with preserved tooth structure.

Application of socket-shield technique for immediate implant placement and provisionalization in esthetic zone: a case report and literature review / 口腔疾病防治

Objective@#To investigate the effect of the socket-shield technique (SST) concurrent with immediate implant placement and provisionalization (IIPP) in the aesthetic restoration of anterior teeth.@*Methods@#A case of maxillary anterior tooth stumps with a thin labial bone wall was treated with SST for preservation of labial soft and hard tissue fullness, combined with an immediate implant placement and immediate provisional crown for restoring the shape of the tooth and gingival molding@*Results@#Immediate implant placement and provisionalization restored the morphology and function of the affected tooth in the shortest possible time. The patient's labial soft and hard tissue contours in the affected tooth area were well preserved in the 18-month follow-up after the application of the SST, which presented a better aesthetic result. The literature review indicates that the indications for SST are unrestorable maxillary anterior teeth, whose dental, periodontal and periapical tissues are healthy and intact. In the esthetic zone, root shielding is effective in maintaining the soft and hard tissue contour on the labial side of the implant. However, there is no consensus on the technical details of SST, such as the ideal coronal height and thickness of the shield, and the management of the gap between the shield and the implant. Thus, more clinical studies and histologic evidence are needed to provide a reference for clinical decision-making. In addition, digital technology can improve the accuracy of implant placement and shield preparation.@*Conclusion@#The correct application of SST combined with IIPP in the esthetic zone can ensure esthetic results. However, more high-quality evidence-based medical evidence is needed for its long-term efficacy, and indications should be strictly controlled during clinical application.

Assessment the retentive force and XRD analysis on the recycling esthetic thermoplastic acetal clasps / Avaliação da força de retenção e análise de DRX dos grampos de resina estética termoplástica acetal reciclada

Objective: To reduce environmental biohazards, technicians should be educated with safe biological waste disposal procedures and dental material recycling. The present study assesses the retentive force, deformation test and XRD analysis of re-injection acetal resin clasps. Material and Methods: specimens were prepared for clasp retention test injection according to the manufacture's instruction for acetal resin. The first group represent control group with (100% New) and other five groups as experimental groups (group II (25% old +75% new), group III (50% old + 50%) new, and group IV (75% old + 25% new) with different percentages between new acetal materials and old acetal materials, while two last groups with several times (group V (100% old) and group VI (re-injection two times)) only used old acetal materials. The X-ray diffraction (XRD) device used to give structural information for the materials to be tested. The study data were analyzed via One-way ANOVA (LSD) at a significant P-value of (p≤0.05) and a confidence level of 95%. Results: After comparing the results, a significant improvement in the retentive force of acetal clasp specimens after re-injection two times there was found high mean value in group re-injection two times and lower mean value recorded in control group. In XRD patterns of there was no diffraction peak refers to crystal structure of acetal resin. Conclusion: the present study findings concluded that the recycling of acetal resin enhanced the retentive force of acetal clasp and not affected on the crystal structures of material(AU)

Objetivo: Para reduzir os riscos biológicos ambientais, os técnicos devem ser educados com procedimentos seguros de eliminação de resíduos biológicos e reciclagem de material dentário. O presente estudo avalia a força de retenção, teste de deformação e análise de DRX de grampos de resina acetal reinjetada. Material e Métodos: as amostras foram preparadas para o teste de retenção dos grampos e a injeção realizada de acordo com as instruções do fabricante para resina de acetal. O primeiro grupo representa o grupo controle com (100% novo) e os outros cinco grupos como grupos experimentais (grupo II (25% antigo + 75% novo), grupo III (50% antigo + 50% novo) e grupo IV (75% antigo + 25% novo) com porcentagens diferentes entre materiais de acetal novos e antigos, enquanto os dois últimos grupos (grupo V (100% antigo) e grupo VI (reinjeção duas vezes)) utilizaram apenas materiais de acetal antigos. O dispositivo de difração de raios X (DRX) foi utilizado para fornecer informações estruturais dos materiais a testados. Os dados do estudo foram analisados por ANOVA um fator (LSD) com um valor P significativo de (p≤0,05) e um nível de confiança de 95%. Resultados: Após a comparação dos resultados, foi encontrada uma melhora significativa na força de retenção das amostras de grampo de acetal após duas reinjeções, além disso, foi registrado um maior valor médio no grupo reinjeção duas vezes e menor valor médio no grupo controle. Nos padrões de DRX não houve pico de difração referente à estrutura cristalina da resina acetal. Conclusão: os resultados do presente estudo concluíram que a reciclagem da resina de acetal aumentou a força retentiva do grampo e não afetou as estruturas cristalinas do material(AU)

Evaluation of the Outcome of Modified Open Sandwich Technique and Conventional Composite Resin Restoration: For Managing Class II Cavity of Primary Molars Among 4- 8 years Old Children

Background: Dental caries is the most prevalent disease in humans, especially during early childhood. The restoration of such an extensive carious lesion should be done properly to reestablish their anatomy and hence their masticatory, phonetic, esthetic, and space-maintainer functions in the dental arches. Composite resins are the most commonly used tooth-colored restorative material, but many difficulties occur particularly when used directly in posterior restorations. The objective of the study was to compare the clinical effectiveness of the Modified Open Sandwich Technique and Conventional Composite Resin Restoration for managing class II caries on primary molars. Material & Methods: This was a randomized control trial and was conducted in the Department of Pedodontics, Faculty of Dentistry, Bangabandhu Sheikh Mujib Medical University (BSMMU), Dhaka, Bangladesh during the period from October, 2021 to September, 2022. In our study we included 68 patients with proximal dental caries of primary molars with reversible pulpitis. The patients were divided by using random sampling technique into two groups – Group A (The modified open sandwich technique, n=34) and Group B (The conventional composite resin restoration, n=34). Results: In total 68 patients from both the groups completed the study. In our study we found mean±SD of age was 5.37±1.24 years. 76.5% of cases of the modified open sandwich technique restorations were & 82.4% of the conventional composite resin restoration were < 6 years. Mandibular primary molars were 64.7% and 53% for the modified open sandwich technique and conventional composite resin restoration respectively. Conventional composite resin restorations showed 32.4% postoperative sensitivity and the modified open sandwich technique restorations showed 11.8%. After 12 months of follow-up, no secondary caries developed. Good marginal adaptation in 100% of cases were found in the modified open sandwich technique and 88.2% for conventional composite restorations. Conclusion: In our study we found that postoperative sensitivity developed more in conventional composite restorations in comparison to the modified open sandwich technique. Initially marginal adaptation showed better in the modified open sandwich method technique. So, conventional and modified open sandwich composite resin techniques were acceptable for primary molar teeth considering secondary caries and marginal adaptation

Typical esthetic outcomes using 5 different modalities to treat MIH affected teeth: a case series

Therapeutic options for incisors affected by Molar Incisor Hypomineralization range from very conservative procedures to those considered to be more invasive. Clinicians must select the appropriate approach, considering the outcomes of the procedures. This case series presents clinical outcomes of five female patients with aesthetic complaints associated with the Molar Incisor Hipomineralization. Macroabrasion, microabrasion and dental vital bleaching were used as combination techniques in three cases. Resin infiltration was indicated for a specific case, considering the oncoming orthodontic treatment. Composite restoration was performed in one patient with posteruptive enamel breakdown. Clinicians must select the appropriate approach according to an individualized evaluation of each case, considering factors such as the patient's expectations, dental age, psychosocial period, the severity of the condition, presence of sensitivity and the presumed aesthetic result of the selected treatment. The advantages and disadvantages of the techniques are presented.

Las opciones terapéuticas para los incisivos afectados por hipomineralización incisivo molar van desde procedimientos muy conservadores hasta los considerados más invasivos. Los clínicos deben seleccionar el enfoque adecuado, teniendo en cuenta los resultados de los procedimientos. Esta serie de casos presenta los resultados clínicos de cinco pacientes femeninas con quejas estéticas asociadas a la Hipomineralización Incisivo Molar. En tres casos se utilizaron la macroabrasión, la microabrasión y el blanqueamiento dental vital como técnicas combinadas. La infiltración de resina fue indicada para un caso específico, considerando el tratamiento de ortodoncia próximo. Se realizó una restauración con composite en un paciente con rotura posteruptiva del esmalte. Los clínicos deben seleccionar el abordaje adecuado de acuerdo con una evaluación individualizada de cada caso, considerando factores como las expectativas del paciente, la edad dental, el período psicosocial, la gravedad de la afección, la presencia de sensibilidad y el resultado estético presumible del tratamiento seleccionado. Se presentan las ventajas e inconvenientes de las técnicas.

Facetas diretas em resina composta utilizando o fluxo digital para planejamento: relato de caso / Direct facets in composite resin using digital flow for planning: case report / Facetas directas en resina compuesta utilizando flujo digital para planificación: reporte de caso

Introdução:O aprimoramento das resinas compostas nos últimosanos em associação com a difusão de informações nas redes sociais tornou as facetas diretas tratamentos populares na dentística restauradora. No entanto, são procedimentos que exigem ampla destreza manual e conhecimento técnico. O fluxo digital através doescaneamento, enceramento digital e prototipagem 3D para construção de guias tem se tornado uma excelente alternativa para aumentar a previsibilidade e aumentar a longevidade destes trabalhos. Objetivo:Descrever o protocolo de confecção de facetas diretas em resina composta, através de um relato de caso, utilizando como auxílio o planejamento digital para confecção de modelo 3D, guia de silicone e paredes palatinas. Descrição do Caso:Paciente do gênero masculino, 43 anos, queixava-se do formato dos seus dentes. Ao exame clínico percebeu-se desgaste dental nos incisivos centrais e linha do sorriso levemente invertida. Após duas sessões de clareamento de consultório com Peróxido de hidrogênio (35%) e mockup direto com resina composta, foi realizada a moldagem e escaneamento do modelo de gesso no laboratório. O enceramento digital foi aprovado, o modelo 3D foi impresso para confecção da guia de silicone. Com auxílio da guia foram executadas facetas diretas nos elementos 13, 12, 11, 21, 22 e 23. Conclusão:O fluxo digital pode ser uma alternativa viável para minimizar as falhas na confecção de facetas diretas em resina composta (AU).

Introduction:The improvement of composite resins in recent years, together with information disseminated on social media, has made direct veneers popular treatments in restorative dentistry. However, these procedures require significant manual dexterity and technical knowledge. Digital work flow using scanning, digital wax-up and 3D prototyping for the construction of guides has become an excellent alternative to increase predictability and the longevity of these procedures. Objective:Describe the manufacturing protocol for direct composite resin veneers, using a case report and digital to construct the 3D model, silicone guide and palatine walls. Case description:Male patient, 43 years old, complained of the shape of his teeth. Clinical examination revealed tooth wear on the central incisors and a slightly inverted smile line. After two whitening sessions with hydroigen peroxide (35%) and direct mockup with composite resin, the plaster model was molded and scanned in the laboratory. Digital wax-up was approved, and the 3D model was printed to manufacture the silicone guide. With the help of the guide, the direct veneers were applied to elements 13, 12, 11, 21, 22 and 23.Conclusions:Digital flow may be a feasible alternative to minimize manufacturing flaws in direct composite resin veneers (AU).

Introducción: La mejora de las resinas compuestas en los últimos años, y la difusión de información en las redes sociales, ha popularizado las facetas directas en los tratamientos en odontología restauradora. Sin embargo, son procedimientos que requieren demasiado destreza manual y conocimientos técnicos. El flujo digital usando escaneo, encerado digital y prototipado 3D para la construcción de guías se ha convertido en una excelente alternativa para aumentar la previsibilidad y la longevidad de estos procedimientos. Objetivo: Describir el protocolo para la realización de carillas directas en resina compuesta, a través de un reporte de caso, utilizando el planeo digital como ayuda para la realización de un modelo 3D, guía de silicona y paredes palatinas. Descripción del caso: Paciente masculino, 43 años, se quejó de la forma de sus dientes. El examen clínico reveló desgaste dental en los incisivos centrales y una línea de sonrisa levemente invertida. Después de dos sesiones de blanqueamiento en consultorio con peróxido de hidrógeno (35%) y maqueta directa con resina compuesta, el modelo de yeso fue moldeado y escaneado en el laboratorio. El encerado digital fue aprovado, el modelo 3D fue impreso para hacer la guía de silicona. Con la ayuda de la guía se realizaron carillas directas en los elementos 13, 12, 11, 21, 22 y 23. Conclusiones: El fluxo digital puede ser una alternativa viable para minimizar fallas en la fabricación de carillas directas en resina compuesta (AU).

Effectiveness of lip repositioning in the treatment of excessive gingival display: systematic review and meta-analysis / Eficacia del reposicionamiento de labios en el tratamiento de la exposición gingival excesiva: revisión sistemática y metanálisis

Background: The objective of this systematic review and meta-analysis was to answer the questions ''Does lip repositioning surgery reduce the amount of gingiva exposed in the smile in individuals with excessive gingival display EGD (excessive gingival display)?'' and ''Is the reduction of the amount of gingiva exposed when smiling obtained with lip repositioning surgery stable over time?'' to evaluate the effectiveness of lip repositioning surgery for correcting EGD on smiling. Materials and Methods: A systematic structured search was carried out in five databases without data restriction. Studies reporting the degree of reduction in gingival ex-posure after lip repositioning surgery were included. Study selection, data extraction, and risk of bias assessment were performed in duplicate Results: One hundred sixty-four references were retrieved and eleven studies met the eligibility criteria. Meta-analysis demonstrated that lip repositioning surgery results in a significant reduction in the amount of exposed gingival tissue (mean difference = -3.03; confidence interval = -3.55; -2.52). In addition, the results remained stable in the evaluated follow-up periods (1, 3, 6 and 12 months). Included studies had a low risk of bias. Conclusions: Lip repositioning surgery is effective for the treatment of EGD on smiling and exhibits stable results in the evaluated periods. The study was registered (CRD42020184866) in the international prospective register of systematic reviews (PROSPERO)

Antecedentes: el objetivo de esta revisión sistemática y metanálisis fue responder a las preguntas "¿La cirugía de reposicionamiento de labios reduce la cantidad de encía expuesta en la sonrisa en personas con exposición gingival excesiva (EGE)?" y "¿La reducción de la cantidad de encía expuesto al sonreír obtenido con cirugía de reposicionamiento de labios estable en el tiempo?" para evaluar la efectividad de la cirugía de reposicionamiento de labios para corregir la EGE al sonreír. Materiales y Métodos: Se realizó una búsqueda sistemática estructurada en cinco bases de datos sin restricción de datos. Se incluyeron los estudios que informaron el grado de reducción de la exposición gingival después de la cirugía de reposición de labios. La selección de estudios, la extracción de datos y la evaluación del riesgo de sesgo se realizaron por duplicado. Resultados: Se recuperaron ciento sesenta y cuatro referencias y once estudios cumplieron con los criterios de elegibilidad. El metanálisis demostró que la cirugía de reposicionamiento de labios da como resultado una reducción significativa en la cantidad de tejido gingival expuesto (diferencia de medias = -3,03; intervalo de confianza = -3,55; -2,52). Además, los resultados se mantuvieron estables en los periodos de seguimiento evaluados (1, 3, 6 y 12 meses). Los estudios incluidos tenían un bajo riesgo de sesgo. Conclusión: La cirugía de reposicionamiento de labios es efectiva para el tratamiento de la EGE al sonreír y presenta resultados estables en los períodos evaluados. El estudio fue registrado (CRD42020184866) en el registro prospectivo internacional de revisiones sistemáticas (PROSPERO).

Socioeconomic Determinants of Demand for Dental Cosmetic Treatments

Introduction: The demand for cosmetic dentistry is a growing trend globally. Increased media coverage, availability of free online information, and the improved economic status of the general population have led to an increase in the patient’s aesthetic expectations. Since no study has measured the relationship between the economic status of people and the choice of cosmetic dentistry in Iran and due to the growing demand for it, this study was designed. Method: In this descriptive epidemiological study, we visited three completely different areas in terms of Socioeconomic status (SES) in Tehran. A checklist was used to record the gender, job, age, education level, maternal status, and source of payment for cosmetic dentistry treatment. Result: The majority of the volunteers for dental cosmetic restoration were 23?26 years. Of 498 cosmetic restoration volunteers, 50 were men and 448 were women. As for the education level, most of the participants had a high school diploma. The cost of cosmetic restoration of 351 patients (70%) was paid by the parents or the spouse, and 147 patients paid the cost from their income. Our study showed that 7% of visits to dental clinics were only for cosmetic treatment demands in Tehran in 2021. Conclusion: Type of job, education level, and marital status had no significant relationship with the choice of cosmetic treatment while age had a significant relationship with the choice of cosmetic dental restoration treatment. In addition, the choice of cosmetic dental treatment was completely related to gender, and women were the main users of it.

An Insight Performance of Zirconia Implant Abutment: A Systematic Review and Meta?Analysis of Randomized Controlled Clinical Trial

To determine the clinical performance of zirconia abutment (ZA) by comparing with a titanium abutment (TA) and sub?mucosal?modified zirconia abutment. A systematic search was conducted to retrieve eligible randomised controlled trials (RCTs) from Medline, Cochrane Library, SCOPUS, Embase, Web of Science, and Google Scholar. A search was further divided in two parts. Part I comprises eligible RCTs between zirconia abutment and titanium abutment, and part II included RCTs of zirconia abutment with sub?mucosal modified, pink?veneered glass ceramic versus non?veneered zirconia abutment. Esthetic, biological, and abutment survival was a primary outcome, and technical complications were included as an additional outcome. Fifteen eligible RCTs (Part I: N = 9 and Part II: N = 6) were evaluated, and a total of 362 abutments in 364 subjects were analysed for outcome variables. A sub?group meta?analysis reported no significant difference for Esthetic outcome. However, the overall mean (p =0.03) was higher for zirconia group in those of thin gingival phenotype. Spectrophotometric evaluation of peri?implant mucosal Esthetic does not show any significant difference. Similarly, pink?veneered versus non?veneered group reported no significant difference for thin (<2 mm) and thick (>2 mm) mucosal attachment. Biological outcome does not show any significant difference for comparable groups in both parts. There is marginally lower abutment survival for internally connected zirconia abutment (ZA: 95.4% TA: 100%). Zirconia abutment exhibited excellent Esthetic compared to titanium abutment in those of thin gingival phenotype. Sub?mucosa veneering of zirconia abutment with pink glass c

Edge level of aligners and periodontal health: a clinical perspective study in young patients

ABSTRACT Introduction: Although the superiority of clear aligners over multi-bracket appliances in keeping gingiva healthy has been suggested, the possible benefits of one aligner design over another have not yet been investigated, especially with regard to the vestibular edge. Objective: The aim of this study was to measure several periodontal indexes in adolescents undergoing orthodontic treatment with aligners, comparing two different types of rim. Methods: The study involved 43 patients aged between 14 and 18 years. The periodontal health was assessed using plaque index (PI), gingival index (GI), and gingival bleeding index (GBI), at the start of the treatment with aligners (T0), with a vestibular rim (VR) reaching up to 3 mm beyond the gingival margin. Three months later (T1), aligners were set to obtain a juxtagingival rim (JR) on the second quadrant and VR on the first quadrant. The periodontal indexes were measured again, both at T1 and then three months later (T2). Results: Intra-quadrant comparisons revealed a statistically significant worsening of the periodontal indexes only for the second quadrant (p<0.05), at T1 (GI), and especially at T2 (PI, GI, GBI), while no statistically significant changes were found for the first quadrant. Conclusions: More severe mechanical irritation, especially during insertion and removal of the aligner, can explain the worsening inflammatory indexes with the JR. In addition, the pressure exerted by the JR on the gingival sulcus seemed to facilitate plaque deposition, whereas the VR had a protective effect, reducing the risk of mechanical trauma.

RESUMO Introdução: Embora se alegue uma superioridade dos alinhadores transparentes sobre os aparelhos multibraquetes em manter a gengiva saudável, ainda não foram investigados os possíveis benefícios de um modelo de alinhador sobre outro, especialmente no que diz respeito à borda vestibular. Objetivo: O objetivo deste estudo foi medir vários índices periodontais em adolescentes submetidos a tratamento ortodôntico com alinhadores, comparando dois tipos diferentes de borda. Métodos: O estudo envolveu 43 pacientes com idade entre 14 e 18 anos. A saúde periodontal foi avaliada por meio do índice de placa (IP), índice gengival (IG) e índice de sangramento gengival (ISG), ao início do tratamento com alinhadores (T0), com borda vestibular (BV) estendendo-se até 3 mm além da margem gengival. Três meses depois (T1), os alinhadores foram ajustados para se obter uma borda justagengival (BJ) no segundo quadrante e BV no primeiro quadrante. Os índices periodontais foram medidos novamente tanto em T1 quanto três meses depois (T2). Resultados: As comparações intraquadrantes revelaram uma piora estatisticamente significativa nos índices periodontais apenas para o segundo quadrante (p<0,05), em T1 (IG) e especialmente em T2 (IP, IG, ISG), enquanto nenhuma mudança estatisticamente significativa foi encontrada para o primeiro quadrante. Conclusões: Irritações mecânicas mais intensas, principalmente durante a inserção e remoção do alinhador, podem explicar a piora dos índices inflamatórios com a BJ. Além disso, a pressão exercida pela BJ no sulco gengival pareceu facilitar a deposição de placa, enquanto a BV teve um efeito protetor, reduzindo o risco de trauma mecânico.

Clinical decision and related factors influencing implant direction in the esthetic area / 华西口腔医学杂志

Implant treatment in the esthetic area requires stable osseointegration and successful esthetic outcomes. Achieving this goal requires careful consideration of accurate implant axis and ideal three-dimensional position. Owing to the high esthetics and the special anatomical structure of the maxillary, a successful implant means a synthesized deli-beration of the residual bone dimensions, soft-tissue thickness, and the relationship of the residual alveolar ridge with the planned restoration. This article offers an in-depth analysis of the clinical decisions and key factors affecting the implant direction in the esthetic area.

Research progress on the tunnel technique for root coverage / 口腔疾病防治

@#Gingival recessions (GRs) result in root hypersensitivity, root surface caries, and esthetic problems. Various root coverage surgeries are being developed for periodontal plastic therapy. The tunnel technique (TUN) is one of the most widely applied surgeries due to its features of being minimally invasive, practical, excellent outcomes and long-term stability; however, there are still some limitations of this technique. The history and evolution from the envelope flap to TUN, including its efficiency when compared with coronally advanced flaps with a connective tissue graft (CTG), are reviewed in this paper. The limitations of TUN are discussed in consideration of our clinical experience; for example, there is high technique sensitivity when TUN is applied in GR>5 mm because of the great difficulty in covering the grafts. The advantages of surgical access, including vertical incisions in the vestibule, “W” type and pinhole access, are discussed for different situations. Mattress sutures and sling sutures in a single tooth or multiple teeth are applied in TUN. The different types of grafts, such as CTG, platelet-rich plasma, articular dermal matrix and xenogeneic collagen matrix, are described. Mechanical, chemical and biological conditioning of the root surface are recommended during surgery. Protecting the surgical area and taking antibiotics postoperatively are also very important. Finally, the modifications when TUN is applied with other kinds of techniques are discussed, including lateral closed TUN, laterally positioned flaps, double papilla flaps and frenuloplasty. Minimally invasive, esthetic, long-term stability and simplified techniques are the development trends of TUN in the future.

Application of soft tissue augmentation in labial contour aesthetics of anterior dental implants / 口腔疾病防治

@#After tooth extraction, labial contour collapses due to inevitable physiologic bone remodeling. To achieve optimal outcomes for pink esthetic treatment at anterior implant sites, bone or soft tissue augmentation has been advocated to maintain or reconstruct the labial tissue contour. When choosing soft tissue augmentation for esthetic restoration, it is necessary to strictly grasp the indications for surgery. Soft tissue augmentation to maintain or reconstruct the labial tissue contour could be considered in patients with healthy soft tissue and no bone defects or only mild horizontal bone defects. In immediate, early and late implant placement, the timing of soft tissue augmentation may vary. In immediate implantation, the labial bone plate is intact, so it is highly recommended to simultaneously manage soft tissue during implant placement. However, patients may have large bone defects with early or late implant placement. The risk of augmenting bone and soft tissue simultaneously is likely too high, and bone augmentation surgery is often performed at the first stage while soft tissue augmentation surgery is performed at the second stage. Therefore, soft tissue surgery is often carried out simultaneously with abutment connection. Currently, soft tissue augmentation is achieved mostly with adjacent autologous soft tissue grafts, such as free gingival grafts, subepithelial connective tissue grafts or pedicle palatal flaps, which are often accompanied by a second surgical area. The replacement of autogenous soft tissue grafting with new biological materials will become an inevitable trend. In this article, we analyze and summarize the indications, timing and different methods of soft tissue augmentation to maintain and reconstruct the labial contour.

Study on the ideal sagittal position of the lower third of the face in high-angle patients with different forehead forms / 口腔疾病防治

Objective@#To explore the ideal sagittal position of the lower third of the face in high-angle patients with different forehead forms and to provide a reference for clinical treatment. @*Methods@#Informed consent and portrait authorization were obtained from all patients, and the study passed the ethical review of the unit. We categorized forehead forms into four types: straight, rounded, type I angular (angled at the middle third of the forehead) and type II angular (angled at the upper third of the forehead). Profiles of high-angle patients with different forehead forms were collected. The initial position was when the facial axis point (FA point) was positioned at the goal anterior-limit line (GALL). After being silhouetted, the lower third of the face was moved forward and backward by 1 mm, 2 mm, 3 mm, and 4 mm each, plus the initial silhouetted picture, to obtain 9 images for each patient. A survey was created with these lateral profile silhouettes, and the silhouette images were ranked by 30 orthodontists and 30 laypersons. @*Results@# There were significant differences in profile scores at different movement distances of the lower third of the face among high-angle patients with different forehead shapes (P<0.05). Overall, high-angle patients with straight or type II angular foreheads had higher scores when the lower third of the face did not move. For high-angle patients with a rounded forehead, orthodontists and laypersons gave the highest scores when the lower third of the face was moved backward by 2 mm and 4 mm, respectively. For high-angle patients with a type I angular forehead, orthodontists thought the scores of backward movement of 4 mm were the highest, and laypersons thought the scores of backward movement of 3 mm were the highest. No significant difference was found in scores between orthodontists and laypersons (P>0.05). @*Conclusion @#The forehead forms and the sagittal position of the lower third of the face will affect the face’s profile aesthetics. Patients with straight and type Ⅱ angular foreheads has the best profile when the FA point is located on the GALL line. For patients with rounded and type Ⅰ angular foreheads, a posterior location of the lower third of the face is more desirable than the initial position.

Feminidades y masculinidades relacionadas con el tráfico de drogas en Sonora, México / Femininities and masculinities related to drug trafficking in Sonora, Mexico / Femininidades e masculinidades relacionadas ao tráfico de drogas em Sonora, México

Este estudio busca describir elementos de masculinidad y feminidad relacionados en el ingreso y el accionar en una actividad delictiva de alto impacto: el tráfico de drogas. Respetando una metodología cualitativa, se utilizó una entrevista semiestructurada a un grupo de personas que se dedicaron al tráfico de drogas en el estado de Sonora, México, dos mujeres y siete hombres, para explorar elementos de feminidad y masculinidad relacionados con el ingreso al tráfico de drogas en cuatro dimensiones: poder, economía, estética y cuerpo. Se muestra que los analizados buscan en el tráfico cumplir con modelos impuestos socialmente en función de su género; existen también diferenciaciones que sugieren una revalorización en sus maneras de ejercer el poder, sus metas económicas y el uso del cuerpo para obtener cuotas de poder.

This study seeks to describe elements of masculinity and femininity related to entering and acting in a high-impact criminal activity: drug trafficking. Following a qualitative methodology, a semi-structured interview was used with a group of people involved in drug trafficking in the state of Sonora, Mexico, two women and seven men, to explore elements of femininity and masculinity related to entering drug tra-fficking in four dimensions: power, economy, aesthetics and body. It is shown that those analyzed seek in trafficking to comply with socially imposed models based on their gender; there are also differentiations that suggest a revaluation in their ways of exercising power, their economic goals and the use of the body to obtain power quotas.

Este estudo procura descrever elementos de masculinidade e feminilidade relacionados à entrada e operação em uma atividade criminosa de alto impacto: o tráfico de drogas. Seguindo uma metodologia qualitativa, foi utilizada uma entrevista semi-estruturada com um grupo de pessoas envolvidas no tráfico de drogas no estado de Sonora, México, duas mulheres e sete homens, para explorar elementos de feminilidade e masculinidade relacionados ao ingresso no tráfico de drogas em quatro dimensões: poder, economia, estética e corpo. Mostra-se que os analisados procuram no tráfico cumprir modelos socialmente impostos com base em seu gênero; há também diferenciações que sugerem uma revalorização em suas formas de exercer o poder, seus objetivos econômicos e o uso do órgão para obter cotas de poder.

Conservative smile enhancement: a case report and brief review on multidisciplinary approach in aesthetic dentistry / Tratamento conservador de sorriso: um relato de caso e breve revisão sobre abordagem multidiscplinar na odontologia estética

ABSTRACT The gingival contour, the color of the teeth and the presence of interincisal diastema are seen as unsightly factors, being highly harmful from a social point of view. The present study aimed to report a comprehensive and conservative esthetic treatment executed with a multidisciplinary approach in a 20-year-old female patient that presented darkened teeth with poor spacing and excessive gingival display while smiling, as well as present a brief literature review on multidisciplinary approach in esthetic dentistry. After clinical examination and diagnosis, a treatment plan was elaborated to meet the patient's expectations with a conservative approach. After patient consent, therapy began with supervised home-based tooth whitening with 22% carbamide peroxide applied one hour/daily for 14 days, followed with gingival recontouring surgery and, after a healing period of 30 days, diastemas closure with direct composite resin technique, occlusal adjustment, finishing, and polishing. The multidisciplinary approach was fundamental for the accomplishment of the proposed treatment, achieving satisfactory esthetic and functional results.

RESUMO O contorno gengival, a cor dos dentes e a presença de diastemas interincisivos são vistos como fatores antiestéticos, sendo altamente prejudicial do ponto de vista social. O presente estudo teve como objetivo relatar um tratamento estético conservador executado com abordagem multidisciplinar em uma paciente do sexo feminino de 20 anos que apresentava dentes escurecidos com pouco espaçamento e exposição gengival excessiva ao sorrir, bem como apresentar uma breve revisão de literatura sobre à abordagem multidisciplinar em odontologia estética. Após exame clínico e diagnóstico, foi elaborado um plano de tratamento para atender as expectativas do paciente com abordagem conservadora. Após consentimento do paciente, foi iniciada o clareamento dental supervisionado com peróxido de carbamida 22% aplicado uma hora/dia por 14 dias, seguido de cirurgia de recontorno gengival e, após um período de cicatrização de 30 dias, fechamento de diastemas com técnica de resina composta direta. Neste caso, a abordagem multidisciplinar foi fundamental para a realização do tratamento proposto, alcançando resultados estéticos e funcionais satisfatórios.

Sistema CAD/CAM en la confección de prótesis totales dentales / The CAD/CAM system in the fabrication of total dental prostheses

La técnica CAD/CAM es un sistema que ha facilitado los procesos de toma de impresiones totales e incorpora registros intraorales y requisitos apropiados para lograr bases protésicas adecuadas, lo cual permite óptimos resultados en clínica dental, como son el ahorro de tiempo y la comodidad para el especialista y el paciente, razones que llevan al profesional estomatológico a dar el paso hacia una odontología digital. El objetivo del estudio fue analizar el sistema CAD/CAM en la confección de prótesis totales dentales. La búsqueda se realizó en las bases de datos Google Scholar, Pubmed y Scopus, intentando responder a la pregunta orientadora: ¿Cuáles son los aspectos más significativos para el sistema CAD/CAM en la confección de prótesis totales dentales? Como resultados, se pudo interpretar que, consiguiendo registros tridimensionales producidos en un escáner, se proporciona una mejor adaptación de estructuras respecto a los métodos convencionales, por lo que induce estética y precisión, que son factores importantes en la odontología. Se concluyó que el sistema CAD/CAM disminuye el margen de error humano y conduce a mayores éxitos odontológicos, al brindar un mejor soporte para la toma decisiones y conseguir mejores resultados estéticos y funcionales en las prótesis totales de los pacientes(AU)

The CAD/CAM technique is a system that has facilitated the process of taking total impressions and incorporates intraoral records and appropriate requirements to achieve adequate prosthetic bases, which allows optimal results in the dental clinic, such as time savings and comfort for the specialist and the patient, reasons that lead the dental professional to take the step towards digital dentistry. The objective of the study was to analyze the CAD/CAM system in the fabrication of total dental prostheses. The search was carried out in Google Scholar, Pubmed and Scopus databases, trying to answer the guiding question: What are the most significant aspects for the CAD/CAM system in the manufacture of total dental prostheses? As results, it was possible to interpret that, by obtaining three-dimensional records produced in a scanner, it provides a better adaptation of structures compared to conventional methods, thus inducing esthetics and precision, which are important factors in dentistry. It was concluded that the CAD/CAM system reduces the margin of human error and leads to greater dental success by providing better support for decision making and achieving better esthetic and functional results in the total prostheses of patients(AU)