Percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation for the treatment of moderate hallux valgus / 中国骨伤

OBJECTIVE@#To observe clinical effect of percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation in treating moderate hallux valgus.@*METHODS@#Totally 23 patients with moderate hallux valgus were treated with percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation from August 2019 to January 2021, and 1 patient was loss to follow-up, and finally 22 patients(30 feet) were included, 4 males (6 feet) and 18 females(24 feet), aged from 27 to 66 years old with an average of(50.59±11.95) years old. Hallux valgus angle (HVA), intermetatarsal angle (IMA), metatarsal span (the distance between the first and the fifth metatarsal bones), changed of soft tissue width, American Orthopaedic Foot and Ankle Society(AOFAS) score, and Visual Analogue Scale (VAS) were collected and compared before operation and 6 months after operation.@*RESULTS@#Twenty-two patients were followed up from 5.7 to 6.4 months with an average of (6.13±0.85) months. The first metatarsal osteotomy of patients were obtained bone union, and deformity of the toes was corrected. Complications such as avascular necrosis of metatarsal head and transfer metatarsalgia were not occurred. Postoperative HVA, IMA, metatarsal span, soft tissue width, VAS, AOFAS score at 6 months were significantly improved compared with pre-operation (P<0.01). According to AOFAS score at 6 months after operation, 10 feet were excellent, 18 good and 2 poor. Two feet with poor were excellent after prolonged 8-shaped bandage and hallux valgus splint fixation time.@*CONCLUSION@#Percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation for the treatment of moderate hallux valgus could better correct deformity of hallux valgus, relieve foot symptoms, good recovery of postoperative function, and has a significant clinical efficacy.

Short-term efficacy of digitally-assisted traditional Chinese medicine manual reduction combined with 3D printed splint in the treatment of AO type-A distal radius fractures / 中国骨伤

Objective To explore the short-term efficacy of digitally-assisted traditional Chinese medicine manual reduction combined with 3D printed splint in the treatment of AO type-A distal radius fractures, and explore the quantification of traditional Chinese medicine manual reduction and personalized improvement of splinting. Methods The clinical data of 50 patients with AO type-A distal radius fractures, who received treatment at the outpatient department of Cangzhou Integrated Traditional Chinese and Western Medicine Hospital in Hebei Province, were retrospective analyzed. The patient cohort included 22 females and 28 males, with ages ranging from 25 to 75 years old. Among them, 27 cases presented with distal radius fractures on the left side, and 24 cases on the right side. The patients were categorized into two groups: treatment group (n=25) and control group(n=25). There were 13 males and 12 females in the treatment group, with an average age of (56.2±5.5) years old. Treatment approach for this group involved several steps. Initially, Mimics Research software was used to conduct comprehensive analysis of complete CT data from the affected limb, resulting in the creation of a three-dimensional model. Subsequently, 3D models of the bones and skin contours, stored as STL format files, were imported into the Materialise Magics 23.0 software for model processing and repair. This facilitated the simulation of reduction and recording of displacement data, effectively generating a "digital prescription" to guide and quantify traditional Chinese medicine manipulation procedures. Finally, a personalized 3D printed splint was applied for fixation treatment. There were 15 males and 10 females in the control group, with an average age of (53.32±5.28) years old. These patients were treated with manualreduction combined with traditional splinting. The clinical efficacy of the two groups was assessed in terms of fracture reduction quality, fracture healing time, Gartland-Werley wrist joint score and X-ray parameters (palminclination angle, ulnar deviation angle, radius height) at 6 weeks post-operatively. Results The treatment group exhibited a shorter duration for achieving clinical healing compared to the control group (P<0.05). Six weeks post-operatively, the treatment group demonstrated higher wrist joint function scores, and a higher proportion of excellent and good outcomes than the control group(P<0.05). The treatment group was superior to the control group in terms of imaging parameters 6 weeks post-operatively (P<0.05). Conclusion By quantifying skin contours through digital simulation prescription reduction, a personalized 3D printed splint is developed to effectively stabilize fractures, enhancing localized fixation while ensuring greater adherence, stability, and comfort. This innovative approach offers personalized treatment for AO type-A distal radius fractures and presents a novel, precise treatment strategy for consideration.

Pectus excavatum ­ Correção cirúrgica utilizando tala externa de poliuretano fabricada com tecnologia de impressão 3D / Pectus excavatum ­ Surgical correction, using polyurethane external splint made with 3D printing technology

Objetivou-se relatar o emprego de uma tala externa confeccionada com material de poliuretano e cobertura interna de neopreme na reparação cirúrgica do pectus excavatum em um felino jovem. O felino apresentava deformidade anatômica congênita na região do externo e sinais clínicos respiratórios. Imagens avançadas de tomografia foram utilizadas para moldar a tala impressa com tecnologia tridimensional. Esta alternativa possibilitou melhor planejamento cirúrgico e, com isso, conforto para o paciente, além da qualidade própria do material de poliuretano que é levemente maleável, o que permitiu melhor moldagem e expansão torácica durante a respiração. A tala se provou resistente o suficiente para suportar a tração ocasionada pelos fios de sutura e possibilitou o reposicionamento adequado do osso esterno ao mesmo tempo que se mostrou confortável e acarretou mínimas lesões ao paciente.

The aim of this paper was to report the use of an external splint made of polyurethane material and internal neopreme covering in the surgical repair of a pectus excavatum in a young feline. The feline exhibited a congenital anatomical deformity in the external region and clinical respiratory signs. Advanced CT images were used to shape the 3D-printed splint. This alternative allowed better surgical planning and, therefore, comfort for the patient, this because to the quality of the polyurethane material, which is slightly malleable, and allowed for better molding and chest expansion during breathing. The splint proved to be strong enough to withstand the traction caused by the suture threads and allowed the proper repositioning of the sternum, at the same time it was comfortable and caused minimal injuries to the patient.

Clinical observation on plastic splint treatment of middle clavicle fracture based on a new classification / 中国骨伤

OBJECTIVE@#According to 73 patients with middle clavicle fracture treated conservatively, a new classification of middle clavicle fracture was proposed, and the clinical effect of plastic splint in the treatment of middle clavicle fracture was observed.@*METHODS@#Total 73 patients with middle clavicle fracture treated with plastic splint from September 2018 to August 2020 were analyzed retrospectively. All the patients were divided into 4 types according to the degree of fracture displacement. There were 16 cases of typeⅠ, including 7 males and 9 females, ranging in age from 18 to 37 years old, with a mean of (28.6±7.8) years old;12 cases of mild disease, 3 cases of moderate disease and 1 case of severe disease. There were 16 cases of type Ⅱ, including 6 males and 10 females, ranging in age from 25 to 49 years old, with a mean of (37.3±9.4) years old;5 cases of mild disease, 8 cases of moderate disease and 3 cases of severe disease. There were 7 cases of type Ⅲ, including 4 males and 3 females, ranging in age from 33 to 57 years old;2 cases of mild disease, 3 cases of moderate disease and 2 cases of severe disease. There were 34 cases of type Ⅳ, including 16 males and 18 females, ranging in age from 48 to 82 years old, with a mean of(66.4±14.9) years old;7 cases of mild disease, 17 cases of moderate disease and 10 cases of severe disease. All patients received plastic splint external fixation for 4 weeks. Visual analgue scale (VAS) and Constant-Murley shoulder scores before treatment and 1, 3 and 9 months after treatment were observed and recorded to evaluate the change of pain degree and shoulder function recovery before and after treatment. The patients' satisfaction with the appearance after treatment was recorded at the latest follow-up. The X-ray findings at the latest follow-up were used to judge whether the patient had fracture nonunion. And according to the fracture healing time and imaging findings, the excellent and good rate of clinical curative effect in patients with different types was obtained.@*RESULTS@#All patients were followed up, and the duration ranged from 9 to 11 months, with a mean of (9.8±0.7) months. The VAS scores of typeⅠ, typeⅡand type Ⅳ before treatment were 2.88±0.83, 3.67±0.80 and 6.92±1.71 respectively, which were decreased to 0.54±0.19, 0.77±0.25 and 1.18±0.17 respectively after 9 months of treatment. The Constant-Murley shoulder scores of typeⅠ, typeⅡand type Ⅳ were 65.81±2.09, 63.50±2.22 and 47.93±2.91 respectively before treatment, and increased to 88.56±2.11, 85.12±2.23 and 71.25±2.16 respectively after 9 months of treatment. Five patients were not satisfied with the appearance after treatment;6 patients had no obvious continuous callus passing through after 9 months of treatment, which was fracture nonunion.@*CONCLUSION@#The classification of middle clavicle fracture is more appropriate to the clinic, which has a certain clinical guiding significance for the selection of treatment methods and prognosis of middle clavicle fracture. Plastic splint is effective in the treatment of middle clavicle fracture without obvious displacement and overlapping displacement, and the incidence of complications is low. It can be popularized in clinic.

Expert consensus on stabilization with splint in traumatic dental injuries of permanent tooth / 中华口腔医学杂志

Stabilization with splint is an important surgical technology in traumatic dental injuries of permanent tooth. In order to standardize the clinical application of the technique and to improve the therapeutic effects of traumatic injured teeth, the Society of Stomatological Emergency, Chinese Stomatological Association organized relevant professional experts and put forward an expert consensus on the basis of considerable discussion. The contents of the present expert consensus covered indications for tooth fixation, material selection of splints and operation methods, applying to the treatment of tooth loosening, tooth displacement and tooth avulsion replantation caused by traumatic injuries. It is also suitable for preoperative and prognosis evaluations of traumatic injured teeth before tooth fixation.

Closed manipulative reduction and external fixation with cardboard splint for the treatment of Monteggia fracture / 中国骨伤

OBJECTIVE@#To explore clinical efficicacy of closed manipulative reduction and external fixation with cardboard splint in treating Monteggia fracture.@*METHODS@#Fifty-eight children with Monteggia fracture were underwent closed manipulative reduction and external fixation with cardboard splint from January 2010 to Junuary 2018. Among them, including 37 males and 21 females, aged from 3.5 to 12 years old with an average of (8.48±2.29) years old;the courses of disease ranged from 0.5 hours to 9 days with an average of (4.21±1.46) days. Broberg and Morrey scores before treatment, 1, 3 and 6 months after treatment were used to evaluate clinical effects.@*RESULTS@#All children were followed up from 1 to 6 months with an average of (3.35±2.12) months. Broberg and Morrey score (7.24±2.81) before treatment, (32.06 ±8.33) at 1 month after treatment, (73.18±5.56) at 3 months after treatment and (95.87±6.75) at 6 months after treatment; there were statistical differences at each time points after treatment with before treatment (@*CONCLUSION@#Treatment of Monteggia fractures with closed manipulative reduction and external fixation with cardboard splint could reach integration of motion and quietness, also could remove external fixation at early stage, and get obvious short-term and medium-term therapeutic results.

Clinical observation of homemade splint external fixation in the treatment of metacarpal fractures / 中国骨伤

OBJECTIVE@#To explore the clinical effect of manual reduction combined with homemade splint external fixation in the treatment of metacarpal fractures.@*METHODS@#A retrospective analysis was performed in 126 patients with metacarpal fracture treated by manual reduction and homemade splint external fixation in the emergency department of our hospital from January 2018 to December 2018, including 102 male, 24 female, ranging in age from 9 to 73 year old, with an average of (33.2±14.3)years old. During the treatment, the X-ray was re-examined regularly, and the external fixation was continued or adjusted according to the X-ray situation. The X-ray showed callus growth. After the fracture was stable, the external fixation was removed to continue functional exercise. The TAM scoring standardwas used to evaluate the hand function, and the fracture healing and complications were summarized.@*RESULTS@#Of the 126 patients, 6 patients were treated with operation because of fracture displacement during the treatment. The other 120 patients were treated with this method and all of them got bony healing. The healing time was (6.3±1.8) weeks. The follow up time ranged from 2 to 12 months, with a mean of (4.4±2.2) months. At the latest follow up, TAM score was used to evaluate the hand function:excellent in 105 cases, good in 13 cases, fair in 2 cases and poor in 0 case. Shortening deformity was found in 7 cases and angulation deformity in 3 cases.@*CONCLUSION@#Manual reduction combined with homemade splint external fixation in the treatment of metacarpal fractures can achieve good clinical results. Homemade splint is easy to obtain materials and low cost, and it is an effective method worthy of clinical promotion.

Closed folding apex manipulation combined with splinting for the treatment of double fractures of distal ulna and radius in children / 中国骨伤

OBJECTIVE@#To investigate specific technique and clinical effects of closed folding top consolidation maneuver combined with splint fixation maneuver for consolidation and cedar bark external fixation splint for the treatment of double fractures of distal ulna and radius in children.@*METHODS@#From January 2017 to December 2019, 17 children with double fractures of distal ulna and radius were treated with closed folded apex consolidation maneuver, including 13 males and 4 females, aged from 4 to 11 years old with an average of (7.29±2.34) years old. The fractures were fixed with cedar bark splint and followed up for 6 months, and alignment of fracture was evaluated according to the latest X-rays by follow up, and function of the affected limbs was evaluated by Anderson forearm function evaluation criteria.@*RESULTS@#Fifteen of 17 children were successfully reset immediately, and 2 children were successfully reset again. The average fixed time was (25.00±3.35) days. At 6 months of follow up, 12 patients got excellent results, 3 good, 2 fair, and 0 poor according to Anderson forearm function evaluation criteria. The position of all children were larger than 3/4, and 10 children were received anatomical reduction, alignment of 4 children was less than 10°, 3 children was less than 15°. No complications such as fracture displacement, nonunion, compartment syndrome, and forearm rotation dysfunction occurred.@*CONCLUSION@#Restoration of distal radius double fracture in children with the combination of the closed folding and top fixation maneuver and splint fixation maneuver has advantages of higher success rate, lower complications, which could reduce operating difficultyand pain of patients.

Clinical observation on pulley suspension traction reduction combined with self-made splint fixation for the treatment of extended distal radius fracture / 中国骨伤

OBJECTIVE@#To explore clinical effects of pulley suspension traction reduction combined with self-made splint fixation in treating extended distal radius fracture.@*METHODS@#From December 2017 to December 2019, 60 patients with extended distal radius fractures were divided into observation group and control group, 30 patients in each group. In observation group, there were 12 males and 18 females, aged from 50 to 75 years old with an average of (59.63±8.08) years old;according to AO classification, 25 patients were type A2 and 5 patients with type A3;fractures were fixed by pulley suspension traction and self-made splint. In control group, there were 11 males and 19 females, aged from 52 to 76 years old with an average of (59.77±8.03) years old;according to AO classification, 24 patients were with type A2 and 6 patients were type A3;fractures were treated by conventional manipulation with self-made splint fixation. The radius height, ulnar angle and palmar angle between two groups were compared before and after treatment, and clinical effects were evaluated by advanced Green and O'Brien wrist joint scoring after treatment.@*RESULTS@#All patients were followed up from 11 to 13 months with an average of (11.90± 0.80) months. The splint was removed for 42 to 60 days with an average of (50.20±4.94) days. After removal of splint, X-rays indicated that all patients obtained bone healing with smooth of joint surface. In observation group, radius height was (4.57± 1.16) mm, ulnar angle was (12.83±3.25) °, palmar angle were (-21.17±3.36) ° respectively before treatment, (10.10± 1.75) mm, (24.30±3.16) °, (9.40±2.13) ° respectively at 8 weeks after treatment;in control group, radius height, ulnar angle, palm angle were (4.50±1.43) mm, (12.83±3.10) °, (-21.50±3.38) ° respectively before treatment, and (8.90±1.24) mm, (21.20±2.91) °, (6.16±2.94) ° respectively at 8 weeks after treatment;there were no significant difference in radius height, ulnar deviation angle and palmar inclination between two groups before treatment (@*CONCLUSION@#Compared with conventional manual traction and reduction, pulley suspension traction reduction combined with self made splint fixation for the treatment of extended distal radius fracture has more advantages with stable and reliable traction, good reduction, and better wrist joint function. It could be selected and applied according to the actual situation of patients.

Surgical Treatment of Post-traumatic Elbow Stiffness by Wide Posterior Approach / Tratamento cirúrgico da rigidez pós-traumática do cotovelo por via posterior ampla

Abstract Objective To demonstrate the clinical outcomes and complication rates of the surgical release with a single posterior approach in the treatment of post-traumatic elbow stiffness. Methods A prospective study with patients submitted to surgery between May 2013 and June 2018 in a single center. The access to the elbow was made through the posterior approach. The patients were followed up by an occupational therapy team, and were submitted to a standardized rehabilitation protocol, with static progressive orthoses and dynamic orthoses. The primary outcome was the range of flexion-extension of the elbow after 6 months. Results A total of 26 patients completed the minimum follow-up of 6-months. The mean range of flexion-extension of the elbow at the end of 6 months was of 98.3 ± 22.0°, with an amplitude gain of 40.0 ± 14.0° in relation to the pre-operative period (p< 0.001). The average flexion-extension gain at the end of 6 months was of 51.7% ± 17.1% (p< 0.001). The mean pronosupination at the end of 6 months was of 129.0 ± 42.7° (p< 0.001). Half of the cases had moderate and severe stiffness in the pre-operative period, compared with 7.7% at 6 months post-operatively (p< 0.001). The mean score for the Mayo Elbow Performance Score (MEPS) and Disabilities of the Arm, Shoulder and Hand (DASH) instruments was 74.4 ± 16.8 points and 31.7 ± 21.9 points respectively (p< 0.001 for both). The visual analogue scale (VAS) score presented no statistically significant difference compared to the pre-operative period (p= 0.096). Complications were observed in 6 (23%) patients, and no new surgical procedures were necessary. Conclusions The surgical release of the elbow associated with a rehabilitation protocol is a safe technique, with satisfactory results and low rate of complications.

Resumo Objetivo Demonstrar os resultados clínicos e a taxa de complicações da liberação cirúrgica por via única posterior no tratamento da rigidez pós-traumática de cotovelo. Métodos Estudo prospectivo, com pacientes submetidos a cirurgia entre maio de 2013 e junho de 2018 em um único centro. Foi realizado acesso ao cotovelo por via posterior. O seguimento dos pacientes foi feito por uma equipe de terapia ocupacional, e eles foram submetidos a um protocolo de reabilitação padronizado, com órteses estáticas progressivas e dinâmicas. O desfecho primário foi a amplitude de flexoextensão do cotovelo após 6 meses. Resultados Um total de 26 pacientes completaram o seguimento mínimo de 6 meses. A média de flexoextensão do cotovelo, ao final de 6 meses, foi de 98,3° ± 22,0°, com um ganho de amplitude de 40,0° ± 14,0° em relação ao pré-operatório (p< 0,001). A média de ganho relativo de flexoextensão, ao final de 6 meses, foi de 51,7% ± 17,1% (p< 0,001). A média de pronossupinação, ao final de 6 meses, foi de 129,0° ± 42,7° (p< 0,001). Metade dos casos apresentava rigidez moderada e grave no pré-operatório, contra 7,7% aos 6 meses de pós-operatório (p< 0,001). A pontuação nos instrumentos Mayo Elbow Performance Score (MEPS) e Disabilities of the Arm, Shoulder and Hand (DASH) apresentou melhora estatisticamente significativa em relação ao pré-operatório, atingindo 74,4 ± 16,8 pontos e 31,7 ± 21,9 pontos, respectivamente. A escala visual analógica (EVA) não apresentou diferença estatisticamente significativa em relação ao pré-operatório (p= 0,096). Complicações foram observadas em 6 (23%) pacientes, não sendo necessária nova abordagem cirúrgica em nenhum paciente. Conclusões A liberação cirúrgica do cotovelo associada a protocolo de reabilitação é técnica segura, com resultados satisfatórios e baixa taxa de complicações.

Moldeado nasoalveolar prequirúrgico de un paciente con labio y paladar hendido unilateral izquierdo / Presurgical nasoalveolar molding in a patient with left unilateral cleft lip and palate

Resumen Introducción: El labio y paladar hendido son malformaciones craneofaciales que se presentan en 1:1000 nacidos vivos en Colombia. Realizar un moldeado nasoalveolar previo a la cirugía favorece el reposicionamiento de los cartílagos nasales deformados y de los procesos alveolares. Objetivo: Dar a conocer a los profesionales la importancia de realizar moldeado nasoalveolar en un paciente con labio y paladar hendido antes de la intervención quirúrgica. Materiales y métodos: En la clínica odontológica de la Universidad del Sinú de Montería (Córdoba, Colombia), se atendió una paciente de 17 días de nacida que presentaba labio y paladar hendido completo unilateral izquierdo severo. Luego de diligenciar la historia clínica odontológica, se realizó placa de órtesis, que se cambió cada 15 días y se hizo el retoque del "tutor" cada 8 días. Resultados: La placa de órtesis permitió un moldeado naso alveolar, con el progreso en la alimentación y mejoras en el contorneado de los tejidos nasales, que mejoró la preparación para la operación de la hendidura a los 8 meses de edad. Conclusiones: La importancia del moldeado nasoalveolar en casos como el presentado, es propiciar mejores condiciones físicas, favoreciendo la ingesta de alimentos y beneficiando la apariencia física.

Abstract Introduction: Cleft lip and palate is a craniofacial birth defect that accounts for 1:1000 live birhts in Colombia. Performing nasoalveolar molding before surgery facilitates the reshaping of deformed nasal cartilage and alveolar processes. Objective: To make professionals aware of the importance of performing nasoalveolar molding in a patient with cleft lip and palate before surgical intervention. Materials and methods: A 17-day-old infant with a full left unilateral cleft lip and palate was treated at the dental clinic of the University of Sinú, Montería (Córdoba, Colombia). Once the dental clinical history was recorded, an orthosis plate was made. The plate was changed every 15 days and the molding appliance was repositioned every 8 days. Results: The orthosis plate promoted nasoalveolar molding, which facilitated feeding and improved the shape of nasal tissues. Consequently, this early intervention improved the preparation for the surgery of the cleft when the child reached 8 months of age. Conclusions: Nasoalveolar molding in patients with full cleft lip and palate is important to promote better physical conditions, which favor food intake and benefit their physical appearance.

Análise do equilíbrio postural estático e da intensidade das dores musculoesqueléticas após o uso de palmilhas proprioceptivas por militares do serviço ostensivo / Análisis del equilibrio postural estático y de la intensidad de los dolores musculoesqueléticas después del uso de plantillas propioceptivas por militares del servicio ostensivo / Analysis of static postural balance and of intensity of musculoskeletal pains after the use of proprioceptive insoles by ostensive service militaries

RESUMO Para a manutenção do equilíbrio, o organismo utiliza os sistemas visuais, vestibulares e proprioceptivos, que enviam informações para o sistema nervoso central acerca das condições do corpo com o objetivo de estabilizá-lo. Este estudo avaliou o efeito das palmilhas proprioceptivas sobre o equilíbrio postural estático e as dores musculoesqueléticas após dois meses de uso, por meio de uma pesquisa analítica longitudinal com 15 militares saudáveis do sexo masculino com média de idade de 34±7,5 anos. Eles foram submetidos à avaliação do equilíbrio por meio da plataforma Medicapteurs® e pelo protocolo CNT. Não houve diferença estatística para os desvios do corpo e velocidade do centro de pressão. A pressão plantar teve mudança estatisticamente significante para o pé esquerdo e o pé direito correspondendo a p=0,0001 e p=0,0007, respectivamente. Houve redução das médias de dores nos joelhos, pés e calcanhares e diminuição significativa da dor lombar, com p=0,0180. O equilíbrio estático não foi alterado significativamente com o uso das palmilhas proprioceptivas pelos militares, contudo elas proporcionaram melhor redistribuição das pressões plantares e parecem atenuar as dores musculoesqueléticas das extremidades inferiores. Por isso as palmilhas podem ser consideradas para esse grupo uma terapêutica de prevenção contra lesões relacionadas à sua atividade laboral.

RESUMEN Para mantener el equilibrio el cuerpo utiliza los sistemas visuales, vestibulares y propioceptivos, que envían información al sistema nervioso central sobre las condiciones del cuerpo para estabilizarlo. Este estudio evaluó el efecto de las plantillas propioceptivas sobre el equilibrio postural estático y los dolores musculoesqueléticas después de dos meses de uso, a través de una investigación analítica longitudinal con 15 soldados sanos con una edad media de 34±7.5 años. Ellos fueron sometidos a evaluación de equilibrio a través de la plataforma Medicapteurs® y por el protocolo CNT. No hubo diferencia estadística para las desviaciones del cuerpo y para la velocidad del centro de presión. La presión plantar tuvo un cambio estadísticamente significativo para el pie izquierdo y el pie derecho correspondiente a p=0.0001 y p=0.0007, respectivamente. Hubo una reducción en las promedio de los dolores en las rodillas, pies y talones y una disminución significativa en el dolor lumbar, con p=0.0180. El equilibrio estático no se modificó significativamente con el uso de plantillas propioceptivas por los militares, sin embargo, proporcionaron una mejor redistribución de las presiones plantares y parecen ablandar los dolores musculoesqueléticas en las extremidades inferiores. Por lo tanto las plantillas pueden considerarse para ese grupo como una terapia de prevención contra lesiones relacionadas con su actividad laboral.

ABSTRACT To maintain the balance, the body uses visual, vestibular and proprioceptive systems, which send information to the central nervous system about the body's conditions in order to stabilize it. This study evaluated the effect of proprioceptive insoles on static postural balance and musculoskeletal pains after two months of use, through a longitudinal analytical study with 15 healthy male soldiers with a mean age of 34±7.5 years. They were subjected to balance evaluation through the Medicapteurs® platform and by CNT protocol. There was no statistical difference for the deviations of the body and speed of the center of pressure. Plantar pressure had a statistically significant change for the left and the right feet, corresponding to p=0.0001 and p=0.0007, respectively. There was a reduction in the mean values of the pains in the knees, feet and heels and a significant decrease in lumbar spine pain, with p=0.0180. The static balance was not significantly altered with the use of proprioceptive insoles by the militaries; however, these insoles provided a better redistribution of plantar pressures and seem to attenuate the musculoskeletal pains of the lower extremities. Therefore, insoles can be considered as a prevention therapy against injuries for this group related to their work activity.

Fractura metafisaria de radio distal asociada a una fractura de escafoides, en un adolescente de 14 años / Distal radius fracture combined with scaphoid fracture, in a 14-year-old teenager / Fratura metafisária do rádio distal associada a uma fratura escafóide em adolescente de 14 anos

La asociación entre fractura de radio distal y fractura de escafoides es una asociación infrecuente, en la presentación inicial, pasa inadvertida muchas veces la fractura a nivel de escafoides. El diagnóstico precoz nos permite un correcto tratamiento evitando posibles complicaciones en la evolución. Se presenta el caso de un adolescente de 14 años con dicha asociación lesional. Se le realizó reducción cerrada y fijación percutánea con alambres de Kirschner a nivel del radio distal y se trató la fractura de escafoides, de forma ortopédica, con yeso antebraquipalmar con inclusión del primer dedo. Se obtuvo la consolidación de ambos focos con excelentes resultados clínicos.

The association between distal radius fracture and scaphoid fracture is a rare association, in many cases the scaphoid fracture can be overlooked at the initial presentation. The early diagnosis allows a correct treatment avoiding possible complications in the follow-up. The case of a 14-year-old teenager with this association is presented. Closed reduction and percutaneous fixation was performed with Kirschner Wires at distal radius fracture, the scaphoid fracture was treated orthopedically with short-arm thumb spica cast. Consolidation of both fractures was obtained with excellent clinical results.

A associação entre fratura do rádio distal e fratura do escafoide é uma associação pouco freqüente; na apresentação inicial, a fratura do escafóide geralmente passa despercebida. O diagnóstico precoce nos permite um tratamento correto, evitando possíveis complicações na evolução. É apresentado o caso de um adolescente de 14 anos com essa associação lesional. Ele foi submetido a redução fechada e fixação percutânea com fios de Kirschner no raio distal, e a fratura do escafóide foi tratada ortopedicamente com um molde de antebraço incluindo o primeiro dedo. A consolidação de ambos os focos foi obtida com excelentes resultados clínicos.

Method and accuracy of determining the jaw position of repositioning splint with the aid of digital technique / 北京大学学报(医学版)

OBJECTIVE@#To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro.@*METHODS@#A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05.@*RESULTS@#With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm.@*CONCLUSION@#A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.

Intramedullary Stabilization Technique Using Headless Compression Screws for Distal Ulnar Fractures

Distal ulnar fractures are commonly accompanied by distal radial fractures, and several treatment options such as plate osteosynthesis and pinning with Kirschner's wires are used. In this study, we present a technique using headless compression screws to achieve bony union of distal ulnar fractures. From November 2016 to November 2018, we treated 11 patients with distal ulnar fractures combined with distal radial fractures with headless compression screws (DePuy Synthes). Patients were instructed to maintain a short-arm splint for less than two weeks after the treatment. The mean time to bony union was 6.5 weeks, mean Quick Disabilities of the Arm, Shoulder, and Hand score was 14.6 points, and mean visual analog scale score was 1.09 points. Full range of motion was possible in all directions after surgery and no specific complications were observed. The suggested technique allows minimal incision and minimally invasive intramedullary fixation and can promote bony union in a simple way without specific complications.

Manejo de complicación postraumática dental. Informe de caso / Management of the postraumatic dental complication. A case report

Resumen Se presenta el caso clínico de una paciente femenina de 7 años de edad, la cual sufrió traumatismo dental en el central superior derecho permanente, al impactarse de manera directa en el pavimento al caer de una bicicleta. Se presenta necrosis pulpar como complicación postraumática a un mes de ocurrido el evento. El objetivo de este caso es mostrar que el diagnóstico adecuado y el conocimiento sobre un protocolo para el manejo del paciente con trauma dental son indispensables para el éxito del tratamiento y pronóstico del diente.

Abstract The clinical case of a 7-year-old female patient who suffered dental trauma in the permanent upper right central incisor presented by directly impacting the pavement after falling from a bicycle. Pulpar necrosis is presented as a postraumatic complication one month after the event. The objective of this case is to show that the adequate diagnosis and knowledge about the protocol for the management of the patient with dental trauma is essential for the success of the treatment and prognosis of the tooth.

Protocolo de Durán modificado en rehabilitación precoz de lesiones tendinosas flexoras de la mano / Modified Duran protocol in early rehabilitation of flexor tendon injuries of the hand

OBJETIVOS: conocer la efectividad del Protocolo de Durán Modificado en las Lesiones Tendinosas Flexoras de la Mano determinando el grado de discapacidad funcional en pacientes atendidos por el Servicio de Medicina Física y Rehabilitación del Hospital de Clínicas en el periodo agosto ­ diciembre de 2016. MATERIAL Y MÉTODOS: se incluyeron dos grupos paralelos: al primer grupo (9 pacientes) se aplicó el protocolo de Durán Modificado y al segundo (9 pacientes) el tratamiento rehabilitador convencional. La valoración de la funcionalidad fue a través de la fórmula de Strickland, el sistema de Bruck Gramcko y la Distancia Pulpejo-Palma. Se realizó en 36 sesiones de 30 minutos aproximadamente para cada modalidad terapéutica con la correspondiente evaluación al finalizar los 3 meses de terapia. RESULTADOS: los que realizaron el protocolo de Durán Modificado finalizaron el tratamiento con una funcionalidad excelente en 4 casos, bueno en 3 y regular en 2 según la fórmula de Strickland. Según el sistema de Buck Gramcko la funcionalidad fue excelente para 5 pacientes y regular para 4. Y finalmente con la evaluación de la distancia pulpejo - palma se determinó que 4 pacientes obtuvieron un rango excelente, 4 bueno y 1 regular. CONCLUSIONES: la aplicación del protocolo de Durán modificado como rehabilitación precoz en pacientes con lesiones tendinosas flexoras de la mano es de mayor efectividad que el tratamiento rehabilitador convencional siendo una herramienta que puede ser aplicada de manera temprana en pacientes postoperados por esta afección

OBJECTIVES: to determine the effectiveness of the Modified Duran Protocol on flexor tendon injuries of the hand determining the degree of functional disability in patients treated by the Department of Physical Medicine and Rehabilitation at the Hospital de Clinicas during term August - December 2016.MATERIAL AND METHODS: we included two parallel groups: The Duran Modified protocol was applied on the first group (9 patients) and the Conventional Rehabilitation (9 patients) Treatment on the second. The assessment of the functionality was carried out with the formula Stricklan, Bruck Gramcko System and Pulpejo-Palma Distance. It was conducted in 36 sessions of approximately 30 minutes for each treatment modality with the corresponding evaluation at the end of 3 months of therapy. RESULTS: those who carried out the Modified Duran protocol completed treatment with excellent functionality in 4 cases, good in 3 and fair in 2 according to the formula Strickland. According Gramcko Buck system functionality was excellent for 5 patients and Fair for 4. Finally the evaluation of the pulpejo - palm distance showed that four patients had an excellent range, 4 good and 1 fair. CONCLUSIONS: the application the Modified Duran protocol as immediate rehabilitation in patients with flexor tendon injuries of the hand is more effective than conventional rehabilitation treatment being a tool that can be applied early in patients after surgery for this injury

Small splint external fixation combined with 3D printing brace for the treatment of Colles fractures / 中国骨伤

OBJECTIVE@#To explore the short-term clinical efficacy of manipulation reduction-combined with small splint and 3D printing wrist brace external fixation of wrist brace for Colles fracture and the advantages of using the brace.@*METHODS@#A total of 60 patients with Colles fractures who were treated in Zhongshan Hospital of Traditional Chinese Medicine from February to December 2017 were selected. Patients were randomly divided into 2 groups according to the order of treatment, with 30 patients in the control group, including 13 males and 17 females, aged from 16 to 66 years, with a mean of (49.46±12.63) years; the time from injury to consultation ranged from 3 to 18 h, averaged (6.86±3.15) h. In the experimental group, there were 30 cases, 12 males and 18 females, ranging in age from 14 to 68 years old, with a mean of (46.73±14.40) years old; the time from injury to consultation ranged from 3 to 19 h, averaged(7.06±3.45)h. All the patients in the experimental group and the control group were treated with the same doctor's manipulation to reduce the fracture. The small splints were applied for external fixation after the satisfactory reduction shown in the X-ray. After 1 week of fracture treatment, the small splints were removed from the patients in the experimental group and the 3D printing braces were replaced to maintain fixation until the fracture healed. In the control group, small splints were maintained until the fracture healed. Wrist joint X-ray films were taken before and after reduction and 4 weeks after reduction to observe the palmar inclination angle, ulnar deviation angle, radius height and compare; VAS score and swelling degree score were recorded before and after reduction for 1 and 2 weeks; Cooney and PRWE score of wrist joint were compared after 6 to 8 weeks of reduction.@*RESULTS@#The VAS score of 2 weeks after reduction was 2.40±0.49 in the experimental group and 2.43±0.50 in the control group. There was no statistical difference in the VAS score between the two groups before and after reduction(=0.364). The swelling degree of 2 weeks after reduction was 0.50±0.50 in the experimental group and 0.53±0.50 in the control group. There was no statistical difference in the swelling degree between the two groups before and after reduction(=0.746). The Cooney and PRWE scores of the experimental group were better than those of the control group 6 to 8 weeks after reduction (<0.05), and the anatomical characteristics of palmar inclination, ulnar deviation and radial shortening of the experimental group were better than those of the control group(<0.05).@*CONCLUSIONS@#3D printing braces are light and breathable, comfortable and beautiful, and convenient for dressing. The combination of small splint sequentially applied to Colles fracture has a definite clinical effect, which enriches the means of external fixation treatment. It is believed that with the deepening of clinical research, the design and materials of 3D printing braces as well as their application in future medical treatment will be further developed.

Forefoot disorders and conservative treatment / 영남의대학술지

Forefoot disorders are often seen in clinical practice. Forefoot deformity and pain can deteriorate gait function and decrease quality of life. This review presents common forefoot disorders and conservative treatment using an insole or orthosis. Metatarsalgia is a painful foot condition affecting the metatarsal (MT) region of the foot. A MT pad, MT bar, or forefoot cushion can be used to alleviate MT pain. Hallux valgus is a deformity characterized by medial deviation of the first MT and lateral deviation of the hallux. A toe spreader, valgus splint, and bunion shield are commonly applied to patients with hallux valgus. Hallux limitus and hallux rigidus refer to painful limitations of dorsiflexion of the first metatarsophalangeal joint. A kinetic wedge foot orthosis or rocker sole can help relieve symptoms from hallux limitus or rigidus. Hammer, claw, and mallet toes are sagittal plane deformities of the lesser toes. Toe sleeve or padding can be applied over high-pressure areas in the proximal or distal interphalangeal joints or under the MT heads. An MT off-loading insole can also be used to alleviate symptoms following lesser toe deformities. Morton's neuroma is a benign neuroma of an intermetatarsal plantar nerve that leads to a painful condition affecting the MT area. The MT bar, the plantar pad, or a more cushioned insole would be useful. In addition, patients with any of the above various forefoot disorders should avoid tight-fitting or high-heeled shoes. Applying an insole or orthosis and wearing proper shoes can be beneficial for managing forefoot disorders.

Evaluation of reliability of zirconia materials to be used in implant-retained restoration on the atrophic bone of the posterior maxilla: A finite element study

PURPOSE: Zirconia materials have been used for implant-retained restorations, but the stress distribution of zirconia is not entirely clear. The aim of this study is to evaluate the stress distribution and risky areas caused by the different design of zirconia restorations on the atrophic bone of the posterior maxilla. MATERIALS AND METHODS: An edentulous D4-type bone model was prepared from radiography of an atrophic posterior maxilla. Monolithic zirconia and zirconia-fused porcelain implant-retained restorations were designed as splinted or non-splinted. 300-N occlusal forces were applied obliquely. Stress analyses were performed using a 3D FEA program. RESULTS: According to stress analysis, the bone between the 1) molar implant and the 2) premolar in the non-splinted monolithic zirconia restoration model was stated as the riskiest area. Similarly, the maximum von Mises stress value was detected on the bone of the non-splinted monolithic zirconia models. CONCLUSION: Splinting of implant-retained restorations can be more critical for monolithic zirconia than zirconia fused to porcelain for the longevity of the bone.