Fluoruro de estaño en el control de cavidades sin restauración en dientes temporales / Stannous fluoride in nonrestorative cavity control in primary teeth

Introducción: el control de cavidades sin restauración (NRCC, por sus siglas en inglés), es una opción de tratamiento conservador y no invasivo para dentina cariosa, sobre todo en dentición temporal. Una de las estrategias del NRCC es la remineralización. El fluoruro de estaño (FDE) puede considerarse, como una opción viable ya que existe evidencia de su eficacia cariostática. Objetivo: valorar al FDE como remineralizante alternativo en dentina de molares temporales, asociado al NRCC. Material y métodos: se efectuó un estudio clínico, epidemiológico, y descriptivo con preescolares voluntarios de 3 a 5 años de edad con consentimiento firmado de participación en el estudio, y que presentaron molares con ICDAS 5 y 6. La aplicación del FDE a 0.8%, la evaluación de la dureza de la dentina con los criterios de Nyvad, y el diagnóstico del estado pulpar, la efectuó un operador entrenado para esta finalidad. Se aplicó un análisis estadístico descriptivo y uno no paramétrico. Resultados: el efecto cariostático producido por el FDE a 0.8%, sobre dentina afectada de molares temporales de niños mexicanos fue estadísticamente significativo durante cinco meses. Conclusiones: la aplicación de fluoruro de estaño puede considerarse como una alternativa de tratamiento cariostático asociado al NRCC para niños de 3 a 5 años de edad (AU)

Introduction: nonrestorative cavity control (NRCC), is a conservative and non-invasive treatment option for carious dentin, especially in primary dentition. One of the NRCC strategies is remineralization. Stannous Fluoride (SDF) can be considered as a viable option since there is evidence of its cariostatic efficacy. Objective: to evaluate FDE as an alternative remineralizing agent in the dentin of primary molars, associated with NRCC. Material and methods: a clinical, epidemiological, and descriptive study was carried out with preschool volunteers aged 3 to 5 years with signed consent to participate in the study, and who presented molars with ICDAS 5 and 6. The application of FDE at 0.8%, the evaluation of dentin hardness with the Nyvad criteria, and the diagnosis of pulp status, was carried out by an operator trained for this purpose. A descriptive and non-parametric statistical analysis was applied. Results: the cariostatic effect produced by 0.8% FDE on affected dentin of primary molars of Mexican children was statistically significant for five months. Conclusions: the application of stannous fluoride can be considered as an alternative cariostatic treatment associated with NRCC for children 3 to 5 years of age (AU)

Odontología restauradora mínimamente invasiva: caso clínico / Minimally invasive restorative dentistry: a clinical case

La decoloración de las piezas dentarias puede te-ner un impacto estético y social que lleva a los pa-cientes a buscar una intervención para mejorar su sonrisa. Las manchas superficiales y las irregula-ridades del esmalte pueden deberse a hipoplasias, hipomineralización molar, fluorosis, uso de medica-mentos, manchas blancas causadas por traumatis-mos o infección en la dentición primaria, o manchas post ortodóncicas. El diagnóstico de los defectos del esmalte se realiza a través de un examen visual por transiluminación. Se han propuesto técnicas micro abrasivas con diferentes agentes para eliminar las manchas superficiales del esmalte, así también como el uso de agentes blanqueadores a baja concentra-ción para equilibrar el color de las piezas dentarias. Si las manchas son profundas se requiere de una mega abrasión y posterior restitución anatómica con resinas compuestas. Los avances tecnológicos en los materiales de restauración adhesivos permi-ten imitar las piezas dentarias naturales permitien-do la mínima destrucción de la estructura dental sin comprometer futuras opciones de restauración. El objetivo de este trabajo es mostrar una secuencia de procedimientos mínimamente invasivos para devol-ver la estética perdida en una paciente que concurre a la Cátedra de Odontología Restauradora (AU)

The discoloration of dental pieces can have an aesthetic and social impact that leads patients to seek an intervention to improve their smile. Superficial stains and enamel irregularities may be due to hypoplasia, molar hypomineralization, fluorosis, drug use, white spots caused by trauma or infection in the primary dentition, or post-orthodontic stains. The diagnosis of enamel defects is made through a visual examination by transillumination. Microabrasive techniques with different agents have been proposed to remove surface stains from the enamel, as well as the use of low-concentration whitening agents to balance the color of the teeth. If the stains are deep, a mega abrasion and subsequent anatomical restoration with composite resins are required. Technological advances in adhesive restorative materials make it possible to mimic natural teeth, allowing minimal destruction of tooth structure without compromising future restorative options. The objective of this work is to show the sequence of minimally invasive procedures to return the lost aesthetics in a patient who attends the Chair of Restorative Dentistry (AU)

Uso efectivo de los adhesivos de octava generación / Effective use of eighth generation adhesives

Introducción: se realizó una revisión bibliográfica con el objetivo de conocer, analizar y comparar los diferentes tipos de adhesivos de octava generación que se encuentran en el mercado y la diferencia que existe entre cada uno. Los adhesivos universales han demostrado mejoras en su resistencia, sobre todo en las técnicas de aplicación y en las propiedades de estos materiales, al mejorar la fuerza adhesiva para que el odontólogo pueda brindar tratamientos restaurativos exitosos. Objetivo: conocer, analizar y comparar los diferentes tipos de adhe- sivos de la octava generación empleados en odontología. Material y métodos: se realizó una búsqueda en las bases de datos electrónicas PubMed, BVS, Redalyc y ScienceDirect. Se utilizaron 32 artículos que cumplieron con los criterios predeterminados y la especificidad reque- rida para la pregunta de investigación. Conclusiones: se demostró que la tecnología cada día avanza, sobre todo en el área de los adhesivos, ya que éstos son de mucha utilidad en el día a día del odontólogo; es importante conocer cada uno de éstos, puesto que es un poco complejo seleccionar el correcto, mas no el uso. En la actualidad, existen diversas opciones por las que el odontólogo puede optar, es por ello que el pro- fesional debe estar capacitado sobre cada una de las diferentes marcas existentes y, de acuerdo al tratamiento, debe elegir cuál es mejor utilizar en una rehabilitación. Es importante para el odontólogo conocer estos materiales, ya que esto lo beneficiará al momento de llevar un plan de tratamiento restaurador (AU)

Introduction: a bibliographic review was carried out to learn about, analyze, and compare the different types of eighth-generation adhesives on the market and the difference between each one. Universal adhesives have demonstrated improvements in their resistance, especially in the application techniques and properties of these materials, improving the adhesive strength so that the dentist can provide successful restorative treatments. Objective: to know, analyze and compare the different types of eighth-generation adhesives used in dentistry. Material and methods: a search was made of the following electronic databases: PubMed, BVS, Redalyc, ScienceDirect. Finally, 32 articles that met the predetermined criteria and the specificity required for the research question were used. Conclusions: it was demonstrated that technology is advancing every day, especially in the area of adhesives since these are very useful in the daily life of the dentist. It is important to know each one of these since it is a little complex at the moment of selecting the correct one, but not the use. Currently, there are several options that the dentist can choose, which is why the professional must be trained on each of the various existing brands and according to the treatment which is the best to use at the time of rehabilitation. The dentist needs to know these materials since they will benefit him/her when carrying out a restorative treatment plan (AU)

Adhesión a dentina part II: estrategias para optimizar la adhesión a dentina y protocolos adhesivos / Dentin bonding part II: strategies to optimize dentin bonding and adhesive protocols

La adhesión a dentina con sistemas adhesivos polimé-ricos representa un desafío que surge de la necesi-dad de vincular un sustrato dentario heterogéneo y variable con materiales que presentan todavía cier-tos aspectos a atender para poder conseguir el máxi-mo desempeño. El propósito del presente artículo es evaluar algunas de las estrategias propuestas para mejorar la adhesión a dentina, y sugerir un protocolo de trabajo con los diferentes tipos de sistemas adhesivos (AU)

Dentin bonding with polymeric adhesive systems represents a challenge that arises from the need to link a heterogeneous and variable dental substrate with materials that still have certain aspects to be addressed in order to achieve maximum performance. The aim of this article is to evaluate some of the proposed strategies to improve dentin bonding and to suggest a protocol for each different type of bonding systems (AU)

Evaluación semicuantitativa de los microelementos del esmalte en un modelo de obesidad inducido por glutamato monosódico en ratas / Semi-quantitative evaluation of enamel microelements in an obesity model induced by monosodium glutamate in rats

RESUMEN: En la actualidad, existen múltiples modelos experimentales de obesidad, unos de ellos es la utilización de glutamato monosódico (GMS), un potenciador del sabor ampliamente utilizado en industria alimentaria. Este GMS ha sido relacionado con obesidad, diabetes, insulino resistencia, así como en alteraciones en múltiples órganos, tales como testículos, riñón e hígado, entre otros. Ha sido reportado el efecto del GMS en estructuras orales, tales como las glándulas salivales, alterando su morfología y función. La relación del efecto del GMS frente a tejidos dentarios no ha sido reportada, siendo esto relevantes debido a la información que proporciona a disciplinas tales como arqueología científica, identificación forense, paleoecología y odontología. El objetivo del estudio fue observar la modificación de los elementos en la superficie dental, en un modelo de obesidad inducida por GMS, en ratas. Se utilizaron 12 ratas neonatas Sprague Dawley machos, divididas en dos grupos según exposición a GMS (Grupo Control y Grupo GMS 1: 4 mg/g peso de GMS, 5 dosis, mantenidas 16 semanas. Fue calculado el índice de masa corporal (IMC) e Índice de Lee, además de ser analizados el porcentaje de masa de los elementos C, O, Na, P, Ca, Fe y K en la superficie dental, mediante análisis semicuantitativo. Los resultados indican que GMS indujo obesidad en las ratas, así como alteraciones en los porcentajes de masa de los elementos en la superficie dental, evidenciándose disminución de Ca, P y O, además de aumentos en C y Fe. Según reportes previos, la obesidad inducida por GMS, causa alteraciones en secreción y composición salival, elemento íntimamente relacionado con la composición del esmalte, lo que vendría a explicar nuestros resultados. Entender la composición superficial del esmalte superficial podría ayudarnos a comprender de mejor manera la relación entre caries dentaria y obesidad.

SUMMARY: Monosodium glutamate (MSG) is a flavor enhancer widely used in the food industry. It has been associated with obesity, diabetes, insulin resistance, as well as alterations in multiple organs, such as testicles, kidney, liver, among others. While its effect on oral structures such as the salivary glands has been reported, the impact on dental tissues has not been described. Since this information is also relevant in fields such as forensic identification, palaeoecology and dentistry, the objective of the study was to observe alterations on the tooth surface in a model of obesity in rats induced by MSG. Twelve neonate male Sprague Dawley rats were used, divided into two groups according to MSG exposure (Control Group and MSG1 Group: 4 mg / g weight of MSG, 5 doses were maintained for 16 weeks. Body mass index (BMI) and Lee's index as well as mass percentage of elements C, O, Na, P, Ca, Fe and K on the tooth surface were evaluated by semi-quantitative analysis. In addition to increases in C and Fe, results indicate that MSG induced obesity and alterations in the percentages of mass on the tooth surface in rats, showing a decrease in Ca, P and O, According to previous reports, MSG induced obesity causes alterations in secretion and salivary composition, an aspect closely related to enamel composition, thus explaining our results. Enhanced knowledge of enamel surface composition may help improve our understanding of the relationship between dental caries and obesity.

Biomateriales que inducen la remineralización del esmalte dental y dentina / Biomaterials that induce remineralization of the dentin and enamel surface

Desde los sesentas, con la invención del vidrio bioactivo, los tratamientos de remineralización se han popularizado entre los cirujanos dentistas y su utilización es cada vez mayor; la remineralización, en conjunto con las adecuadas medidas de higiene preventiva, representa uno de los mejores abordajes mínimamente invasivos y a un costo comparativamente bajo. Este estudio documental tiene por objetivo establecer una mejor comprensión del uso clínico de los biomateriales que inducen la remineralización de la superficie del esmalte dental y dentina. Se realizó una exploración utilizando motores de búsqueda (bases de datos en PubMed, Medigraphic, y Science Direct). El proceso de localización de los estudios relevantes se efectuó introduciendo palabras clave como: silicatos de calcio, fosfopéptidos de caseína-fosfato de calcio amorfo, remineralización, esmalte y dentina, incluyéndose en el procedimiento artículos de antigüedad no superior a siete años, en español e inglés, publicados en revistas científicas aprobadas por pares.Actualmente, no es posible remineralizar del todo la estructura dentaria, por lo cual, en un futuro cercano, los esfuerzos de la odontología de remineralización deben apuntar al desarrollo de agentes biomiméticos inteligentes que restauren al cien por ciento la estructura dental perdida (AU)

Since the sixties, with the invention of bioactive glass, remineralization treatments have become popular among dental surgeons. Their usage is increasing; remineralization, in conjunction with appropriate preventive hygiene measures, represents one of the best minimally invasive treatments at a relatively low cost. This documentary study aims to establish a better understanding of the clinical use of biomaterials that induce remineralization of the surface of teeth enamel and dentin. A search was conducted using search engines (PubMed and Medigraphic databases, and Science Direct). The search process for the relevant studies was carried out by introducing keywords such as calcium silicates, phosphopeptides of amorphous calcium casein-phosphate, remineralization, enamel and dentin, including in the search articles no older than seven years in Spanish and English published in scientific reviewed journals. Currently, it is not possible to completely remineralize the dentary structure so, in the near future, remineralization dentistry efforts should aim to develop (AU)

Uso do fluoreto de sódio como dessensibilizante no clareamento dental: uma revisão de literatura / Use of sodium fluoride as a desensibilizer in dental bleaching: a literature review

Objetivo: Verificar, por meio de uma revisão de literatura, a efetividade do uso do fluoreto de sódio como dessensibilizante para casos de sensibilidade induzida por clareamento dental. Resultados: O clareamento dentário tornou-se um dos procedimentos estéticos mais procurados na odontologia. Atualmente, existem duas técnicas supervisionadas por dentistas: o clareamento caseiro e o de consultório. Os materiais mais utilizados são o peróxido de carbamida e o de hidrogênio, respectivamente. O clareamento dental baseia-se na premissa de que o peróxido de hidrogênio penetra na estrutura dentária para interagir com os cromóforos orgânicos. Embora o protocolo de clareamento exija o uso de agentes oxidantes de baixa concentração, a sensibilidade dentária ainda está presente e pode ser considerado o principal efeito adverso da técnica de clareamento. Para minimizar este problema, a aplicação tópica de dessensibilizantes antes e após o clareamento dentário tem mostrado bons resultados na redução da intensidade de sensibilidade. Considerações finais: Mediante revisão apresentada, constatou-se que fluoreto de sódio quando utilizado após o protocolo clareador, como dessensibilizante, não elimina a sensibilidade, mas diminui a intensidade da dor. Quando utilizado antes do clareamento dental, não apresenta resultados positivos. Ademais, salienta-se que quando o fluoreto é incorporado no gel clareador, resulta em menor desmineralização do esmalte dentário.(AU)

Objective: To verify, through a literature review, the effectiveness of using sodium fluoride as a desensitizer for cases of sensitivity induced by tooth whitening. Literature review: Teeth whitening has become one of the most desired aesthetic procedures in dentistry. Currently, there are two techniques supervised by dentists: home whitening and office whitening. The most used materials are carbamide peroxide and hydrogen peroxide, respectively. Teeth whitening is based on the premise that hydrogen peroxide penetrates the tooth structure to interact with organic chromophores. Although the whitening protocol requires the use of low concentration oxidizing agents, tooth sensitivity is still present and can be considered the main adverse effect of the whitening technique. To minimize this problem, the topical application of desensitizers before and after tooth whitening has shown good results in reducing the intensity of sensitivity. Final considerations: Upon the review presented, it was found that sodium fluoride, when used after the whitening protocol, as a desensitizer, does not eliminate sensitivity, but reduces the intensity of pain. When used before tooth whitening, it has no positive results. Furthermore, it should be noted that when fluoride is incorporated into the whitening gel, less enamel demineralization is induced.(AU)

Microabrasión del esmalte. Indicaciones, limitaciones y alcance clínico / Enamel micro-abrasion. Indications, limitations and clinical scope

Existen muchas patologías pigmentarias que alteran la estética del color dentario; algunas de ellas pueden circunscribirse a la superficie externa del esmalte y por ende ser tratadas con una técnica microabrasiva para su eliminación. La indicación de un tratamiento más agresivo en relación al blanqueamiento convencional, dependerá no solo de la ubicación de la lesión, sino también de la severidad de la misma, de la calidad de la estructura del tejido adamantino y de la anatomía dentaria entre muchas otras variables (AU)

ere are many pigment pathologies that alter the aesthetics of tooth color; Some of them can be confined to the outer surface of the enamel and therefore be treated with a microabrasive technique for their removal. e indication of a more aggressive treatment in relation to conventional whitening will depend not only on the location of the lesion, but also on its severity, the quality of the structure of the adamantine tissue and the dental anatomy among many other variables (AU)

Effect of hydrochloric acid commercial presentation for microabrasion technique on loss of enamel structure and surface / Efeito da apresentação comercial de ácido clorídrico para técnica de microabrasão na perda de estrutura e superfície do esmalte

Introdução: A técnica de microabrasão pode ser realizada através de pasta pronta para uso, disponível comercialmente, ou o profissional pode manipulá-la no consultório. Objetivo: Verificar o efeito da apresentação comercial do ácido clorídrico a 10% na manipulação de pasta para microabrasão sobre a superfície do esmalte. Metodologia: Foram selecionados incisivos bovinos e divididos em dois grupos, de acordo com a apresentação comercial do ácido clorídrico (líquido ou em gel). O tratamento foi realizado através de dez aplicações com 10s de duração cada, intercaladas por lavagem de 10s. Vinte incisivos (n=10) foram utilizados para se determinar a perda de estrutura do esmalte. Cada amostra foi pesada, em balança analítica, antes e após submissão à microabrasão. Outras 20 amostras (n=10) foram utilizadas para determinação da rugosidade superficial média (Ra) utilizando-se um rugosímetro. Três amostras de cada grupo do experimento anterior foram selecionadas, aleatoriamente, e outras três amostras adicionais foram preparadas como controle (baseline) para análise em MEV. Resultados: Verificou-se diferença estatística significativa entre a massa final e a inicial e rugosidade superficial das amostras, independente da apresentação comercial do ácido. Nas imagens de MEV observou-se presença de superfície regular para o grupo controle (baseline). Nas demais imagens verificou-se superfície com considerável irregularidade e dissolução discreta do esmalte. Conclusões: O tratamento realizado causou perda significativa de estrutura e aumentou a rugosidade superficial dos espécimes, independente da apresentação comercial do ácido e sem apresentar diferença entre os grupos ao final. A apresentação comercial do ácido não parece ser um fator a interferir no tratamento. (AU)

Introduction: The microabrasion technique can be performed using a commercially available paste, or the dentist can prepare it in his office. Objective: To verify the effect of hydrochloric acid commercial presentation in the handling of microabrasion paste on the enamel surface. Methodology: Bovine incisors were divided into two groups, according to the commercial presentation of 10% hydrochloric acid (liquid or gel). The treatment was carried out through ten applications of 10 s duration each, intercalated with a 10s wash. Twenty teeth (n=10) were used to determine the loss of enamel structure. Each sample was weighed on an analytical balance before and after submission to microabrasion. Another 20 teeth (n=10) were used to determine the average surface roughness (Ra) using a rugosimeter. Three samples from each group of the previous experiment were selected, randomly, and another three additional samples were repared as a control (baseline) for SEM analysis. Results: There was a statistically significant difference between the final and initial mass and the surface roughness of the samples, regardless of the acid commercial presentation. In the SEM images, a regular surface was observed for the control group (baseline). In the other images, there was a surface with considerable irregularity and a slight dissolution of the enamel. Conclusions: The treatment carried out. (AU)

Use of Antibiotics in early Childhood and Dental Enamel Defects in 6- to 12-year-old Children in Primary Health Care / Uso de antibióticos na primeira infância e defeitos de esmalte dentário em crianças de 6 a 12 anos na Atenção Primária à Saúde

ABSTRACT Dental enamel defects (DED) are lesions that occur due several factors. Proper care is needed to promote their treatment and prevention. The aim of this study was to evaluate the occurrence of DED in permanent teeth of children who used antimicrobial drugs in the first four years of life. This is a crosssectional study carried out in a Primary Health Care (PHC) service, which included children from six to 12 years of age. DED were evaluated by oral examination, and data on the use of antimicrobials in early childhood were collected based on medical records. Data were analyzed with the chisquare test and Fisher's exact test. The sample included 144 children. In relation to DED, 50% (72) and 20.1% (29) presented opacity and hypoplasia, respectively. Amoxicillin was the most frequently prescribed drug, followed by sulfamethoxazole + trimethoprim. Among the children, 78.5% (113) were prescribed antimicrobial drugs at least once during the first 4 years of life, and 55% (79) of them presented some type of DED. There was no statistically significant association between the variables analyzed. In conclusion, there was high prevalence of children with DED, and amoxicillin was the most commonly prescribed antibiotic.

RESUMO Os defeitos do esmalte dentário (DED) são lesões que ocorrem devido a vários fatores e é necessária atenção para promover seu tratamento e prevenção. O objetivo foi avaliar a ocorrência de DED em dentes permanentes de crianças que usaram antimicrobianos nos primeiros quatro anos de vida. Tratase de um estudo transversal realizado em um serviço de Atenção Primária à Saúde (APS), que incluiu crianças de seis a 12 anos de idade. A DED foi avaliada por dados de exames bucais, e os dados sobre o uso de antimicrobiano na primeira infância foram coletados com base em prontuários médicos. A análise foi realizada com o teste do quiquadrado e o teste exato de Fisher. A amostra foi composta por 144 crianças. Em relação ao DED, 50%(72) e 20,1%(29) apresentaram opacidade e hipoplasia, respectivamente. A amoxicilina foi o medicamento prescrito com mais freqüência, seguido pelo sulfametoxazol+ trimetoprim. Entre as crianças, 78,5%(113) receberam medica mentos antimicrobianos pelo menos uma vez nos primeiros 4 anos de vida e 55%(79) deles apresentaram algum tipo de DED. Não houve associação estatisticamente significante entre as variáveis analisadas. Em conclusão, houve uma alta prevalência de crianças com DED e a amoxicilina foi o antibiótico mais comumente prescrito.

Evaluación de la adhesión de sistemas adhesivos de grabado total en esmalte dental bovino usando un agente desproteinizante: un estudio in vitro / Evaluation of adhesion of total etch adhesive systems on bovine dental enamel using a deproteinizing agent: an in vitro study

Introducción: Hoy en día, la mayoría de los pacientes requieren tratamiento de ortodoncia fija convencional, la cual utiliza procedimientos adhesivos afines con la superficie amelodentinaria. Aunque existen diferentes técnicas adhesivas que pueden ofrecer adecuados niveles de resistencia al desalojo, el uso del hipoclorito de sodio (NaClO) como agente desproteinizante no ha sido bien definido en materiales de cementación en aparatología ortodóncica convencional. Objetivo: El objetivo de este estudio fue determinar los niveles de resistencia al desalojo con pruebas de microtensión y análisis topográfico con microscopia electrónica de barrido. Material y métodos: 20 bloques de esmalte bovino fueron expuestos superficialmente a soluciones acondicionadoras (ácido ortofosfórico al 37%) con y sin agente desproteinizante (NaClO al 5.25%); finalmente, brackets individuales de ortodoncia fueron cementados con sistemas adhesivos y resinas compuestas de casas comerciales (Ormco y 3M). Las pruebas de resistencia al desalojo fueron realizadas con una máquina de fuerzas universales y el análisis topográfico con microscopia electrónica de barrido. Resultados: El uso del NaClO al 5.25% y la marca Ormco tuvieron estadísticamente los mejores niveles de adhesión que el grupo sin desproteinización y la casa comercial 3M, respectivamente. La topografía adamantina expuesta al agente desproteinizante mostró características de superficie relacionadas con el patrón de grabado tipo I. Conclusión: El uso de un agente desproteinizante (NaClO 5.25%) así como una marca comercial (Ormco) en particular podrían definir el aumento en los niveles de adhesión en superficies adamantinas con aparatología ortodóncica convencional (AU)

Introduction: Nowadays, patients require conventional fixed orthodontic treatment, which uses adhesive procedures related to the dentinal denture surface. Although there are different adhesive techniques that can offer adequate levels of bonding resistance, the use of NaClO as a deproteinizing agent has not been well defined in cementing materials in conventional orthodontic appliances. Objective: The objective of this study was to determine the levels of bond resistance using micro tension tests and topographic analysis with scanning electron microscopy. Material and methods: Twenty-blocks of bovine enamel were exposed superficially to conditioning solutions (37% orthophosphoric acid) with and without deproteinizing agent (5.25% NaClO); finally, individual orthodontic brackets were cemented with adhesive systems and resin composites of different trademarks (Ormco and 3M). Bonding resistance tests were performed with a universal force machine and topographic analysis was made with scanning electron microscopy. Results: The use of 5.25% NaClO and the Ormco brand had statistically better levels of adhesion than the group without deproteinization and the 3M brand, respectively. Adamantine topography exposed to the deproteinizing agent showed surface characteristics related to the type I etching pattern. Conclusion: The use of a deproteinizing agent (NaClO 5.25%) as well as a trademark (Ormco) in particular conditions could define the increase in adhesion levels on adamantine surfaces with conventional orthodontic appliances (AU)

Effect of violet LED light on in-office bleaching protocols: a randomized controlled clinical trial

Abstract Objective This study evaluated the clinical effect of violet LED light on in-office bleaching used alone or combined with 37% carbamide peroxide (CP) or 35% hydrogen peroxide (HP). Methodology A total of 100 patients were divided into five groups (n=20): LED, LED/CP, CP, LED/HP and HP. Colorimetric evaluation was performed using a spectrophotometer (ΔE, ΔL, Δa, Δb) and a visual shade guide (ΔSGU). Calcium (Ca)/phosphorous (P) ratio was quantified in the enamel microbiopsies. Measurements were performed at baseline (T 0 ), after bleaching (T B ) and in the 14-day follow-up (T 14 ). At each bleaching session, a visual scale determined the absolute risk (AR) and intensity of tooth sensitivity (TS). Data were evaluated by one-way (ΔE, Δa, ΔL, Δb), two-way repeated measures ANOVA (Ca/P ratio), and Tukey post-hoc tests. ΔSGU and TS were evaluated by Kruskal-Wallis and Mann-Whitney, and AR by Chi-Squared tests (a=5%). Results LED produced the lowest ΔE (p<0.05), but LED/HP promoted greater ΔE, ΔSGU and Δb (T 14 ) than HP (p<0.05). No differences were observed in ΔE and ΔSGU for LED/CP and HP groups (p>0.05). ΔL and Δa were not influenced by LED activation. After bleaching, LED/CP exhibited greater Δb than CP (p>0.05), but no differences were found between these groups at T 14 (p>0.05). LED treatment promoted the lowest risk of TS (16%), while HP promoted the highest (94.4%) (p<0.05). No statistical differences of risk of TS were found for CP (44%), LED/CP (61%) and LED/HP (88%) groups (p>0.05). No differences were found in enamel Ca/P ratio among treatments, regardless of evaluation times. Conclusions Violet LED alone produced the lowest bleaching effect, but enhanced HP bleaching results. Patients treated with LED/CP reached the same efficacy of HP, with reduced risk and intensity of tooth sensitivity and none of the bleaching protocols adversely affected enamel mineral content.

Do commercial whitening dentifrices increase enamel erosive tooth wear?

Abstract Objective This in vitro study evaluated the effect of commercial whitening dentifrices on erosive tooth wear (ETW) of bovine enamel samples, in comparison with commercial regular dentifrices. Methodology Sixty bovine crowns were embedded in acrylic resin, polished and then had their baseline profile determined. They were randomly assigned to 5 groups (n=12/group), according to the type of commercial dentifrice to be tested: GI - Crest Anti-cavity Regular; GII - Crest 3D White; GIII - Colgate Total 12 Clean Mint; GIV - Colgate Optic White; GV - Placebo (negative control, fluoride-free dentifrice). The samples were submitted to daily erosive and abrasive challenges for 3 days. The erosive challenges were performed 3 times a day by immersing the specimens in 0.1% citric acid solution (pH 2.5) for 90 s. Each day after the first and last erosive challenges, the specimens were subjected to the abrasive challenge for 15 s, using a toothbrushing machine (Biopdi, São Carlos, SP, Brazil), soft toothbrushes and slurry (1:3 g/ml) of the tested toothpastes (1.5 N). The specimens were kept in artificial saliva between the challenges. The final profile was obtained and the ETW (µm) was calculated. Data were analyzed by Kruskal-Wallis and Dunn's tests (p<0.05). Results All dentifrices tested significantly reduced the enamel wear in comparison with the Placebo, except GIII. The median (95% CI) ETW was 1.35 (1.25-1.46)bc for GI, 1.17 (1.01-1.34)cd for GII, 1.36 (1.28-1.45)ab for GIII, 1.08 (1.04-1.14)d for GIV and 2.28 (2.18-2.39)a for GV. Conclusion When dentifrices from the same manufacturer were compared, the whitening dentifrices led to similar or less wear than the regular ones.

Effects of bleaching using 10% carbamide peroxide with calcium or amorphous calcium phosphate on enamel mineral content and hardness / Asociación entre la severidad de Hipomineralización Incisivo-Molar (HIM) y lesiones cavitadas de caries en escolares

ABSTRACT This study evaluated enamel mineral content and surface microhardness before and after bleaching treatment using 10% carbamide peroxide (CP) containing calcium (Ca) or amorphous calcium phosphate (ACP). Thirty-six bovine slabs were randomly allocated into 3 groups (n = 12) according to bleaching treatment: G1 - Opalescence PF 10% (CP), G2 -NiteWhite ACP (CP+ACP), and G3 - Opalescence PF (10%) with calcium (CP+CA). The bleaching agent was applied on enamel surface for 6 h/day over a period of 21 days. Enamel surface was evaluated by Knoop microhardness (KNH) and micro energy-dispersive X-ray fluorescence spectrometry (p-EDXRF) at baseline and at after bleaching treatment. Data were statistically analyzed by repeated measures ANOVA and Tukey's test (a = 0.05). There was a significant decrease in microhardness after bleaching treatments for all study groups, but no difference between bleaching gels. There was no difference in the Ca/P ratio measured by p-EDXRF for all groups at the study times, but the mean value was lower in group CP+CA than in group CP+ACP. Group CP was similar to both CP+ACP and CP+CA. It can be concluded that enamel microhardness decreased after the bleaching process, regardless of the presence of calcium or ACP, but there was no significant change in the Ca/P ratio of enamel after bleaching for each tested gel. This indicates that the bleaching gels have erosive potential, causing softening of enamel without promoting surface loss, regardless of the presence of calcium of ACP ions.

RESUMO Este estudo avaliou o conteúdo mineral do esmalte e a microdureza superficial antes e após o tratamento clareador, utilizando peróxido de carbamida 10% (PC) contendo cálcio (Ca) ou fosfato de cálcio amorfo (ACP) em sua composigao. Trinta e seis espécimes de esmalte bovino foram alocados aleatoriamente em 3 grupos (n = 12) de acordo com os tratamentos clareadores: G1 - Opalescence PF 10% (CP), G2 -NiteWhite (CP+ACP); e G3 - Opalescence PF (10%) com cálcio (CP + CA). O agente clareador foi aplicado na superficie do esmalte por 6 h/dia por um periodo de 21 dias. A superficie do esmalte foi avaliada por microdureza Knoop (KNH) e espectrometria de fluorescencia de raios X micro-dispersiva (p-EDXRF) no inicio e após o tratamento clareador. Os dados foram analisados estatisticamente pelo teste ANOVA de medidas repetidas e Tukey (a = 0,05). Houve uma diminuigao significativa da microdureza após os tratamentos clareadores para todos os grupos estudados, mas nao houve diferenga entre os diferentes géis. Nao houve diferenga da relagao Ca/P mensurada por p-EDXRF para todos os grupos nos tempos estudados; no entanto, o grupo CP+CA apresentou menor valor comparado ao grupo CP+ACP. O grupo CP foi similar aos grupos CP+ACP e CP+CA. Portanto, pode-se concluir que houve redugao significativa da microdureza do esmalte após o clareamento, independente da presenga de cálcio ou APC na composigao dos géis, embora nao tenha havido alteragao significando na relagao Ca/P do esmalte após o clareamento. Isto indica um potencial erosivo dos géis clareadores, causando o amolecimento sem perda da estrutura do esmalte, independente da presenga dos íons cálcio e ACP.

Efectividad de un gel remineralizante / Efectiveness of a remineralizing gel

Este es un estudio ex vivo donde se evalúa la variación en peso de veintiún piezas dentarias sometidas a un ácido dental de uso dental y, posteriormente, a la acción del gel remineralizante, objeto de este estudio, obteniéndose por diferencia de peso la cantidad de material mineral, que queda retenida en la pieza. La acción del ácido ortofosfórico ha producido una disminución del peso entre 28-30% de la pieza dentaria. Luego de la aplicación del gel remineralizante, ésta aumentó entre 15-18% del peso, considerando este aumento como significativo (p menor 0.05). Este aumento demuesta la acción remineralizante, ya que después del lavado este aumento se mantiene (AU)

This is an in vitro study where the variation in weight of twenty-one dental pieces subjected to a dental acid and subsequently to the action of the remineralizing gel is evaluated, obtaining by weight difference the amount of hydroxyapatite that is retained in the piece. The action of orthophosphoric acid causes a decrease in weight between 28-30% of the tooth. After the application of the remineralizing gel, it increases between 15-18% by weight considering this significant increase (p less 0.05) (AU)

Effect of a resin-modified glass-ionomer with calcium on enamel demineralization inhibition: an in vitro study

Abstract We assessed the effect of a new coating material based on resin-modified glass-ionomer with calcium (Ca) in inhibiting the demineralization of underlying and adjacent areas surrounding caries-like lesions in enamel. The measures used were surface hardness (SH) and cross-sectional hardness (CSH). Thirty-six bovine enamel specimens (3 × 6 × 2 mm) were randomly allocated into three groups (n = 12): No treatment (NT); resin-modified glass-ionomer with Ca (Clinpro XT Varnish, 3M ESPE) (CL), and fluoride varnish (Duraphat, Colgate) (DU). The specimens were subjected to alternated immersions in demineralizing (6 h) and remineralizing solutions (18 h) for 7 days. SH measurements were conducted at standard distances of 150, 300, and 450 µm from the treatment area. CSH evaluated the mean hardness profile over the depth of the enamel surface and at standard distances from the materials. The energy-dispersive X-ray spectroscopy analysis was conducted to evaluate the demineralization bands created on the sublayer by % of calcium (Ca), phosphorus (P), and fluoride (F). Ca/P weight ratio was also calculated. Based on SH and CSH measurements, there was no difference between groups at the distances 150 µm (p = 0.882), 300 µm (p = 0.995), and 450 µm (p = 0.998). Up to 50 µm depth (at 150 µm from the treatment area), CL showed better performance than DU ( p< 0.05). NT presented higher loss of Ca and P than CL and DU (p < 0.05). There was no significant difference in the % of F ion among the three groups. The new coating material was similar to F varnish in attenuating enamel demineralization.

Resin-modified glass ionomer containing calcium glycerophosphate: physico-mechanical properties and enamel demineralization

Abstract Sources of calcium and phosphate have been added to dental restorative materials to improve their anticaries effect. Objective This study evaluated the effect of adding calcium glycerophosphate (CaGP) to resin-modified glass ionomer cement (RMGIC) on the physico-mechanical properties, ion release, and enamel demineralization. Material and Methods: Specimens were fabricated for each experimental group: RMGIC without CaGP (Control), RMGIC with 1, 3 and 9% CaGP. To determine the release of fluoride (F), calcium (Ca) and phosphorus (P), six specimens were immersed in demineralization and remineralization solutions for 15 days. In another experimental trial, the following physico-mechanical properties were evaluated at time intervals of 1 and 7 days after fabrication: compressive strength (n=12), diametral tensile strength (n=12), surface hardness of material (n=6) and the degree of conversion of monomers (n=8). To study enamel demineralization, specimens (n=12) were attached to enamel blocks and submitted to pH-cycling. Subsequently, surface and cross-sectional hardness and the concentration of F, Ca and P in enamel were determined. Results The addition of CaGP to RMGIC led to higher mean release of F, Ca and P when compared with control (p<0.001). Mechanical properties were within the range of those of the ionomer cements after addition of 1% and 3% CaGP. The degree of conversion did not differ between groups at the 1st and the 7th day (p>0.439). The addition of 3% and 9% CaGP reduced mineral loss and increased F, Ca and P in the enamel when compared with control (p<0.05). Conclusion The addition of 3% CaGP in RMGIC increased the release of F, P and Ca, reduced enamel demineralization, and maintained the physico-mechanical properties within the parameters for this material.

Effects of in-office bleaching agent combined with different desensitizing agents on enamel

Abstract Objective: To analyze color change, microhardness and chemical composition of enamel bleached with in-office bleaching agent with different desensitizing application protocols. Materials and Methods: One hundred and seventeen polished anterior human enamel surfaces were obtained and randomly divided into nine groups (n = 13). After recording initial color, microhardness and chemical composition, the bleaching treatments were performed as G1: Signal Professional White Now POWDER&LIQUID FAST 38% Hydrogen peroxide(S); G2: S+Flor Opal/0.5% fluoride ion(F); G3: S+GC Tooth Mousse/Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) paste(TM); G4: S+UltraEZ/3% potassium nitrate&0.11% fluoride(U); G5: S+Signal Professional SENSITIVE PHASE 1/30% Nano-Hydroxyapatite (n-HAP) suspension(SP); G6: S-F mixture; G7: S-TM mixture; G8: S-U mixture; G9: S-SP mixture. Color, microhardness and chemical composition measurements were repeated after 1 and 14 days. The percentage of microhardness loss (PML) was calculated 1 and 14 days after bleaching. Data were analyzed with ANOVA, Welch ANOVA, Tukey and Dunnett T3 tests (p<0.05). Results: Color change was observed in all groups. The highest ΔE was observed at G7 after 1 day, and ΔE at G8 was the highest after 14 days (p<0.05). A decrease in microhardness was observed in all groups except G6 and G7 after 1 day. The microhardness of all groups increased after 14 days in comparison with 1 day after bleaching (p>0.05). PML was observed in all groups except G6 and G7 after bleaching and none of the groups showed PML after 14 days. No significant changes were observed after bleaching at Ca and P levels and Ca/P ratios at 1 or 14 days after bleaching (p>0.05). F mass increased only in G2 and G6, 1 day after bleaching (p<0.05). Conclusions: The use of desensitizing agents containing fluoride, CPP-ACP, potassium nitrate or n-HAP after in-office bleaching or mixed in bleaching agent did not inhibit the bleaching effect. However, they all recovered microhardness of enamel 14 days after in-office bleaching.

Inhibitory effect of reduced graphene oxide-silver nanocomposite on progression of artificial enamel caries

Abstract The use of antimicrobial agents is an efficient method to prevent dental caries. Also, nanometric antibacterial agents with wide antibacterial spectrum and strong antibacterial effects can be applied for prevention of dental caries. Objectives: The aim of this study was to evaluate the inhibitory effect of reduced graphene oxide-silver nanoparticles (rGO/Ag) composite on the progression of artificial enamel caries in a Streptococcus mutans biofilm model. Material and Methods: Enamel specimens from bovine incisors were divided into eight treatment groups (n = 13), as follows: group 1 was inoculated with S. mutans grown in Brain Heart Infusion containing 1% sucrose (1% BHIS), as negative control; groups 2-4 were inoculated with S. mutans grown in the presence of different rGO/Ag concentrations (0.08, 0.12, 0.16 mg/mL) + 1% BHIS; group 5-7 were inoculated with S. mutans grown in the presence of different agents (0.16 mg/mL reduced graphene oxide, 0.16 mg/mL silver nanoparticles, 10 ppm NaF) + 1% BHIS; group 8 was mixed with 1% BHIS, without inoculation. Artificial enamel carious lesions were produced by S. mutans biofilm model for 7 days. Confocal laser scanning microscopy and atomic force microscopy were used to analyze roughness and morphology of the enamel surface. Polarized light microscopy and confocal laser scanning microscopy were employed to measure the lesion depth and the relative optical density (ROD) of the demineralized layer. Results: Compared with the control groups, the rGO/Ag groups showed: (a) reduced enamel surface roughness; (b) much smoother and less eroded surfaces; (c) shallower lesion depth and less mineral loss. Conclusion: As a novel composite material, rGO/Ag can be a promising antibacterial agent for caries prevention.

Effect of fluoride application during radiotherapy on enamel demineralization

Abstract Radiation-related caries are one the most undesired reactions manifested during or after head and neck radiotherapy. Fluoride application is an important strategy to reduce demineralization and enhance remineralizaton. Objective: To evaluate the effect of the topical application of fluoride during irradiation on dental enamel demineralization. Material and Methods: Thirty molars were randomly divided into three groups: Non-irradiated (NI), Irradiated (I), Irradiated with fluoride (IF). Each group was subdivided according to the presence or absence of pH-cycling (n=5). In the irradiated groups, the teeth received 70 Gy. The enamel's chemical composition was measured using Fourier Transform Infrared Spectrometry (organic matrix/mineral ratio - M/M and relative carbonate content - RCC). Vickers microhardness (VHN) and elastic modulus (E) were evaluated at three depths (surface, middle and deep enamel). Scanning electron microscopy (SEM) was used to assess the enamel's morphology. Results: The FTIR analysis (M/M and RCC) showed significant differences for irradiation, pH-cycling and the interaction between factors (p<0.001). Without pH-cycling, IF had the lowest organic matrix/mineral ratio and relative carbonate content. With pH-cycling, the organic matrix/mineral ratio increased and the relative carbonate content decreased, except for IF. VHN was influenced only by pH-cycling (p<0.001), which generated higher VHN values. ANOVA detected significant differences in E for irradiation (p<0.001), pH-cycling (p<0.001) and for the interaction between irradiation and pH-cycling (p<0.001). Increased E was found for group I without pH-cycling. With pH-cycling, groups I and IF were similar, and showed higher values than NI. The SEM images showed no morphological changes without pH-cycling. With pH-cycling, fluoride helped to maintain the outer enamel's morphology. Conclusions: Fluoride reduced mineral loss and maintained the outer morphology of irradiated and cycled enamel. However, it was not as effective in preserving the mechanical properties of enamel. Radiotherapy altered the enamel's elastic modulus and its chemical composition.