Реферат
Facing the increasingly severe energy shortage and environmental pollution, electrocatalytic processes using electroactive microorganisms provide a new alternative for achieving environmental-friendly production. Because of its unique respiratory mode and electron transfer ability, Shewanella oneidensis MR-1 has been widely used in the fields of microbial fuel cell, bioelectrosynthesis of value-added chemicals, metal waste treatment and environmental remediation system. The electrochemically active biofilm of S. oneidensis MR-1 is an excellent carrier for transferring the electrons of the electroactive microorganisms. The formation of electrochemically active biofilm is a dynamic and complex process, which is affected by many factors, such as electrode materials, culture conditions, strains and their metabolism. The electrochemically active biofilm plays a very important role in enhancing bacterial environmental stress resistance, improving nutrient uptake and electron transfer efficiency. This paper reviewed the formation process, influencing factors and applications of S. oneidensis MR-1 biofilm in bio-energy, bioremediation and biosensing, with the aim to facilitate and expand its further application.
Тема - темы
Bioelectric Energy Sources/microbiology , Biofilms , Electrodes , Electron Transport , Shewanella/metabolismРеферат
As a new energy source for atrial fibrillation ablation, electric pulse ablation has higher tissue selectivity and biosafety, so it has a great application prospect. At present, there is very limited research on multi-electrode simulated ablation of histological electrical pulse. In this study, a circular multi-electrode ablation model of pulmonary vein will be built on COMSOL5.5 platform for simulation research. The results show that when the voltage amplitude reaches about 900 V, it can make some positions achieve transmural ablation, and the depth of continuous ablation area formed can reach 3 mm when the voltage amplitude reaches 1 200 V. When the distance between catheter electrode and myocardial tissue is increased to 2 mm, a voltage of at least 2 000 V is required to make the depth of continuous ablation area reach 3 mm. Through the simulation of electric pulse ablation with ring electrode, the research results of this project can provide reference for the voltage selection in the clinical application of electric pulse ablation.
Тема - темы
Humans , Heart Rate , Atrial Fibrillation/surgery , Electrodes , Catheter Ablation , ElectricityРеферат
Temporary cardiac pacing is an essential technique in the diagnosis and treatment of arrhythmias. Due to its urgency, complexity, and uncertainty, it is necessary to develop an evidence-based emergency operation norms. Currently, there is no specific consensus guidelines at home or abroad. The Emergency Branch of Chinese Medical Association organized relevant experts to draft the Chinese emergency expert consensus on bedside temporary cardiac pacing (2023) to guide the operation and application of bedside cardiac pacing. The formulation of the consensus adopts the consensus meeting method and the evidentiary basis and recommendation grading of the Oxford Center for Evidence-based Medicine in the United States. A total of 13 recommendations were extracted from the discussion on the methods of bedside temporary cardiac pacing, the puncture site of transvenous temporary cardiac pacing, the selection of leads, the placement and placement of leads, pacemaker parameter settings, indications, complications and postoperative management. The recommended consensus includes the choice between transcutaneous and transvenous pacing, preferred venous access for temporary transvenous pacing, the target and best guidance method for implantation of bedside pacing electrodes, recommended default pacemaker settings, recommended indications for sinoatrial node dysfunction, atrioventricular block, acute myocardial infarction, cardiac arrest, ventricular and supraventricular arrhythmias. They also recommended ultrasound guidance and a shortened temporary pacing support time to reduce complications of temporary transvenous cardiac pacing, recommended bedrest, and anticoagulation after temporary transvenous pacing. Bedside temporary cardiac pacing is generally safe and effective. Accurate assessment, correct selection of the pacing mode, and timely performance of bedside temporary cardiac pacing can further improve the survival rate and prognosis of related emergency patients.
Тема - темы
Humans , Cardiac Pacing, Artificial/methods , Pacemaker, Artificial , Arrhythmias, Cardiac/therapy , Myocardial Infarction/therapy , ElectrodesРеферат
INTRODUCCIÓN: Se revisan los principales errores en la colocación de los electrodos para el registro del ECG. Se ilustran algunos de ellos y se comenta sobre los errores en los informes que pueden tener repercusiones en el diagnóstco clínico.
ABSTRAC: The main mistakes in the placement of electrodes during the recording of an ECG are reviewed. Some of them are illustrated and the consequences for clinical diagnosis are discussed.
Тема - темы
Humans , Electrocardiography/methods , Diagnostic Errors , Electrodes/trendsРеферат
This study introduces a non-invasive gastrointestinal early cancer magnetic anchor ablation electrode endoscopy system, including a magnetic anchor module and ablation electrode module. The magnetic anchoring module is composed of an external guide magnet and an internal magnet, made of permanent magnet material NdFeB; the ablation electrode module is based on the modification of the front end lens hood of the existing endoscope (CMD-90D LED electronic upper gastrointestinal endoscope). The new endoscope system not only includes all the functions of the original endoscope, but also introduces magnetic anchoring to enable the ablation electrode to be accurately positioned and controllable in the process of treating tumors, avoiding the phenomenon of gastric perforation; the introduction of steep pulse electric field ablation electrodes realizes the purpose of non-invasive treatment. Its clinical application will become a new method to treat early cancer of the digestive tract.
Тема - темы
Humans , Electrodes , Endoscopes , Gastrointestinal Tract , Magnetic Phenomena , NeoplasmsРеферат
This study introduces the design and application of home wireless electrocardiograph(ECG) machine based on Internet. The world's first three-lead dry electrode mobile electrocardiograph machine has been developed, on the basis of the successful development of dry electrodes. Moreover, it is not only chips filtering, but also wireless, as a result it is applied to ECG monitoring and diagnosis of patients. Compared with traditional electrocardiograph machine, the machine is very convenient and comes into the home, ECG Machines is connected to mobile phones by Bluetooth, wireless upload, therefore we recommend to achieve remote monitoring and early warning and reduce sudden death, to achieve Internet medical by using Internet technology, people can be self-test. It is playing an increasingly important role and it is an inevitable machine to improve the success rate of diagnosis, monitoring and first aid.
Тема - темы
Humans , Cell Phone , Electrocardiography , Electrodes , Internet , Wireless TechnologyРеферат
Blood glucose monitoring is of great significance to diabetic patients, and the development of rapid, accurate and real-time glucose detection technology has become a research hotspot nowadays. This study introduces the concept and classification of the enzyme-free glucose sensor, expounds enzymefree glucose sensor electrode characterization methods and the application progress of different materials in enzyme-free blood glucose sensors. Meanwhile, some problems of enzyme-free glucose sensor existing in the current research and its future application prospects also will be discussed.
Тема - темы
Humans , Blood Glucose , Blood Glucose Self-Monitoring , Electrodes , Glucose , Monitoring, PhysiologicРеферат
Objective: To analyze the feasibility and safety of bridge therapy with active fixed electrodes connected to external permanent pacemakers (AFLEP) for patients with infective endocarditis after lead removal and before permanent pacemaker implantation. Methods: A total of 44 pacemaker-dependent patients, who underwent lead removal due to infective endocarditis in our center from January 2015 to January 2020, were included. According to AFLEP or temporary pacemaker option during the transition period, patients were divided into AFLEP group or temporary pacemaker group. Information including age, sex, comorbidities, indications and types of cardial implantable electionic device (CIED) implantation, lead age, duration of temporary pacemaker or AFLEP use, and perioperative complications were collected through Haitai Medical Record System. The incidence of pacemaker perception, abnormal pacing function, lead perforation, lead dislocation, lead vegetation, cardiac tamponade, pulmonary embolism, death and newly infection of implanted pacemaker were compared between the two groups. Pneumothorax, hematoma and the incidence of deep vein thrombosis were also analyzed. Results: Among the 44 patients, 24 were in the AFLEP group and 20 in the temporary pacemaker group. Age was younger in the AFLEP group than in the temporary pacemaker group (57.5(45.5, 66.0) years vs. 67.0(57.3, 71.8) years, P=0.023). Male, prevalence of hypertension, diabetes mellitus, chronic renal dysfunction and old myocardial infarction were similar between the two groups (all P>0.05). Lead duration was 11.0(8.0,13.0) years in the AFLEP group and 8.5(7.0,13.0) years in the temporary pacemaker group(P=0.292). Lead vegetation diameter was (8.2±2.4)mm in the AFLEP group and (9.1±3.0)mm in the temporary pacemaker group. Lead removal was successful in all patients. The follow-up time in the AFLEP group was 23.0(20.5, 25.5) months, and the temporary pacemaker group was 17.0(14.5, 18.5) months. In the temporary pacemaker group, there were 2 cases (10.0%) of lead dislocation, 2 cases (10.0%) of sensory dysfunction, 2 cases (10.0%) of pacing dysfunction, and 2 cases (10.0%) of death. In the AFLEP group, there were 2 cases of abnormal pacing function, which improved after adjusting the output voltage of the pacemaker, there was no lead dislocation, abnormal perception and death. Femoral vein access was used in 8 patients (40.0%) in the temporary pacemaker group, and 4 patients developed lower extremity deep venous thrombosis. There was no deep venous thrombosis in the AFLEP group. The transition treatment time was significantly longer in the AFLEP group than in the temporary pacemaker group (19.5(16.0, 25.8) days vs. 14.0(12.0, 16.8) days, P=0.001). During the follow-up period, there were no reinfections with newly implanted pacemakers in the AFLEP group, and reinfection occurred in 2 patients (10.0%) in the temporary pacemaker group. Conclusions: Bridge therapy with AFLEP for patients with infective endocarditis after lead removal and before permanent pacemaker implantation is feasible and safe. Compared with temporary pacemaker, AFLEP is safer in the implantation process and more stable with lower lead dislocation rate, less sensory and pacing dysfunction.
Тема - темы
Humans , Male , Bridge Therapy , Feasibility Studies , Pacemaker, Artificial , Endocarditis, Bacterial/etiology , Electrodes , Device RemovalРеферат
A microbial fuel cell (MFC)-based microbial electrochemical sensor was developed for real-time on-line monitoring of heavy metals in water environment. The microbial electrochemical sensor was constructed with staggered flow distribution method to optimize the parameters such as external resistance value and external circulation rate. The inhibition of concentration of simulated heavy metal wastewater on voltage under optimal parameters was analyzed. The results showed that the best performance of MFC electrochemical sensor was achieved when the external resistance value was 130 Ω and the external circulation rate was 1.0 mL/min. In this case, the microbial electrochemical sensors were responsive to 1-10 mg/L Cu2+, 0.25-1.25 mg/L Cd2+, 0.25-1.25 mg/L Cr6+ and 0.25-1.00 mg/L Hg2+ within 60 minutes. The maximum rejection rates of the output voltage were 92.95%, 73.11%, 82.76% and 75.80%, respectively, and the linear correlation coefficients were all greater than 0.95. In addition, the microbial electrochemical sensor showed a good biological reproducibility. The good performance for detecting heavy metals by the newly developed microbial electrochemical sensor may facilitate the real-time on-line monitoring of heavy metals in water environment.
Тема - темы
Bioelectric Energy Sources , Electrodes , Metals, Heavy/analysis , Reproducibility of Results , Wastewater , WaterРеферат
This study introduces a portable multi-channel EEG signal acquisition system. The system is mainly composed of EEG electrode connector, signal conditioning circuit, EEG acquisition part, main control MCU and power supply part. The low-power EEG acquisition front-end ADS1299 and STM32 are used to form the signal acquisition and data communication part. The collected EEG signal can be transmitted to the PC for real-time display. After relevant tests, the system has small volume, low power consumption, high signal-to-noise ratio, and meets the requirements of portable wearable medical devices.
Тема - темы
Electric Power Supplies , Electrodes , Electroencephalography , Signal Processing, Computer-Assisted , Signal-To-Noise RatioРеферат
BACKGROUND Synthesis of selenium nanoparticles from selenite by Shewanella sp. HN-41 demonstrated that particle size depended on the reaction time and biomass of cells. The slow reaction and low biomass tended to form small particles. In this study, Shewanella sp. HN-41 was introduced into the anode of a nonexternal circuit bioelectrochemical system (nec_BES) to convert chemical energy from lactate to low electron current to the cathode, where selenite was reduced. RESULTS Our experiment with two systems, one bioelectrochemical system with a cathode flushed with nitrogen and the other with a no-nitrogen-flushing cathode, showed that the former could not produce Se nanoparticles after 21 d, but the latter formed them with an average size of 37.7 nm. The SEM and TEM images demonstrated that the particle size of 10 nm occupied over 10% and most of the particles were in the range of 3060 nm. The XRD result and SAED image demonstrated no clear peaks of crystal and proved that the Se nanoparticles are amorphous. CONCLUSIONS : The clean Se nanoparticles were synthesized and completely separated from bacterial cells in the bioelectrochemical system. This study opened a new approach for the biological synthesis of metal nanoparticles. Finally, the Se products in the range of 3060 nm can be tested for antimicrobial activities in medical applications
Тема - темы
Selenium/chemistry , Shewanella/metabolism , Selenium/metabolism , Shewanella/genetics , Electrodes , Nanoparticles/chemistry , Electrochemical TechniquesРеферат
Background: Despite the high reactivity of the platinum electrode, the iodine-coated platinum electrode shows obvious inertness toward adsorption and surface processes. For that, iodine-coated platinum electrodes accommodate themselves to interesting voltammetric applications. Objectives: This study reports using the modified iodine-coated polycrystalline platinum electrode as a voltammetric sensor for ascorbic acid determination in pharmaceutical formulations. Methods: The developed voltammetric method based on recording cyclic voltammograms of ascorbic acid at iodine-coated electrode The optimized experimental parameters for the determination of ascorbic acid were using 0.1 M KCl as a supporting electrolyte with a scan rate of 50mV/s. Results: The anodic peak related to ascorbic acid oxidation was centered at nearly 0.28V. An excellent and extended linear dependence of the oxidative peak current on the concentration of ascorbic acid was observed in the range 2.84x10-3 - 5.68 mM. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.0 µM and 3.01 µM, respectively, attesting to the method's sensitivity. The investigation for the effect of potential interference from multivitamin tablet ingredients (vitamins B1, B6, B12, folic acid, citric acid, sucrose, glucose, and zinc) indicated specific selectivity toward ascorbic acid and the absence of any electrochemical response toward these components. Recovery results in the range 98.93±2.78 - 99.98±5.20 for spiked standard ascorbic acid in pharmaceutical formulations further confirmed the potential applicability of the developed method for the determination of ascorbic acid in real samples. Conclusions: The developed method was successfully applied to the analysis of ascorbic acid (vitamin C), and the obtained results were in good agreement with the labeled values; besides, the statistical tests indicated no significant difference at p=0.05 with a 95% confidence level
Antecedentes: A pesar de su alta reactividad, el electrodo de platino recubierto de yodo muestra una inercia evidente hacia la adsorción y los procesos superficiales. Por ello, los electrodos de platino recubiertos de yodo se adaptan a interesantes aplicaciones voltamétricas. Objetivos: Este estudio informa sobre el uso del electrodo de platino policristalino recubierto de yodo modificado como sensor voltamétrico para la determinación del ácido ascórbico en formulaciones farmacéuticas. Métodos: El método voltamétrico desarrollado se basa en el registro de voltamperogramas cíclicos del ácido ascórbico en el electrodo recubierto de yodo Los parámetros experimentales optimizados para la determinación del ácido ascórbico fueron utilizando KCl 0,1 M como electrolito de soporte con una velocidad de barrido de 50mV/s. Resultados: El pico anódico relacionado con la oxidación del ácido ascórbico se centró en casi 0,28V. Se observó una excelente y extendida dependencia lineal de la corriente del pico oxidativo con respecto a la concentración de ácido ascórbico en el rango 2,84x10-3 - 5,68 mM. El límite de detección (LOD) y el límite de cuantificación (LOQ) fueron 1,0 µM y 3,01 µM, respectivamente, lo que demuestra la sensibilidad del método. La investigación del efecto de la interferencia potencial de los ingredientes de las tabletas multivitamínicas (vitaminas B1, B6, B12, ácido fólico, ácido cítrico, sacarosa, glucosa y zinc) indicó una selectividad específica hacia el ácido ascórbico y la ausencia de cualquier respuesta electroquímica hacia estos componentes. Los resultados de recuperación en el rango de 98,93±2,78 - 99,98±5,20 para el ácido ascórbico estándar adicionado en formulaciones farmacéuticas confirmaron además la potencial aplicabilidad del método desarrollado para la determinación del ácido ascórbico en muestras reales. Conclusiones: El método desarrollado se aplicó con éxito al análisis de ácido ascórbico (vitamina C), y los resultados obtenidos coincidieron con los valores etiquetados; además, las pruebas estadísticas no indicaron diferencias significativas a p=0,05 con un nivel de confianza del 95%
Тема - темы
Humans , Drug Compounding , Cisplatin , Electrodes , IodineРеферат
Microbial fuel cell (MFC) is a bioelectrochemical device, that enables simultaneous wastewater treatment and energy generation. However, a few issues such as low output power, high ohmic internal resistance, and long start-up time greatly limit MFCs' applications. MFC anode is the carrier of microbial attachment, and plays a key role in the generation and transmission of electrons. High-quality bioelectrodes have developed into an effective way to improve MFC performance. Conjugated polymers have advantages of low cost, high conductivity, chemical stability and good biocompatibility. The use of conjugated polymers to modify bioelectrodes can achieve a large specific surface area and shorten the charge transfer path, thereby achieving efficient biological electrochemical performance. In addition, bacteria can be coated with nano-scale conjugated polymer and effectively transfer the electrons generated by cells to electrodes. This article reviews the recently reported applications of conjugated polymers in microbial fuel cells, focusing on the MFC anode materials modified by conjugated polymers. This review also systematically analyzes the advantages and limitations of conjugated polymers, and how these composite hybrid bioelectrodes solve practical issues such as low energy output, high inner resistance, and long starting time.
Тема - темы
Bacteria , Bioelectric Energy Sources , Electricity , Electrodes , Polymers , Water PurificationРеферат
Exoelectrogenic microorganisms are the research basis of microbial electrochemical technologies such as microbial fuel cells, electrolytic cells and electrosynthesis. However, their applications are restricted in organic degradation, power generation, seawater desalination, bioremediation, and biosensors due to the weak ability of biofilm formation and the low extracellular electron transfer (EET) efficiency between exoelectrogenic microorganisms and electrode. Therefore, engineering optimization of interaction between exoelectrogenic microorganisms and electrode interface recently has been the research focus. In this article, we review the updated progress in strategies for enhancing microbe-electrode interactions based on microbial engineering modifications, with a focus on the applicability and limitations of these strategies. In addition, we also address research prospects of enhancing the interaction between electroactive cells and electrodes.
Тема - темы
Bioelectric Energy Sources , Biofilms , Electrodes , Electron Transport , ElectronsРеферат
Microneedles have been developed rapidly in the field of transdermal administration in the past few decades. In recent years, the development of microelectronics technology has expanded the applications of microneedles by combining with microelectronic systems, especially in biological diagnosis and treatment. Different types of microneedles have been designed to extract blood and tissue fluids for detection, or as electrodes to directly detect blood sugar, melanoma and pH in real-time in vivo, both show good prospects for real-time detection applications. In this paper, we review the design of materials and structure of microelectronic-based microneedles, and discuss their advances in biological diagnosis.
Тема - темы
Administration, Cutaneous , Drug Delivery Systems , Electrodes , Microinjections , NeedlesРеферат
Transcranial direct current stimulation (tDCS) is a brain stimulation intervention technique, which has the problem of different criteria for the selection of stimulation parameters. In this study, a four-layer real head model was constructed. Based on this model, the changes of the electric field distribution in the brain with the current intensity, electrode shape, electrode area and electrode spacing were analyzed by using finite element simulation technology, and then the optimal scheme of electrical stimulation parameters was discussed. The results showed that the effective stimulation region decreased and the focusing ability increased with the increase of current intensity. The normal current density of the quadrilateral electrode was obviously larger than that of the circular electrode, which indicated that the quadrilateral electrode was more conducive to current stimulation of neurons. Moreover, the effective stimulation region of the quadrilateral electrode was more concentrated and the focusing ability was stronger. The focusing ability decreased with the increase of electrode area. Specifically, the focusing tended to increase first and then decrease with the increase of electrode spacing and the optimal electrode spacing was 64.0-67.2 mm. These results could provide some basis for the selection of electrical stimulation parameters.
Тема - темы
Brain , Electric Stimulation , Electrodes , Head , Transcranial Direct Current StimulationРеферат
OBJECTIVES@#To evaluate the accuracy and safety of measurements of transcutaneous carbon dioxide partial pressure (TcPCO@*METHODS@#A total of 45 very low birth weight infants were enrolled. TcPCO@*RESULTS@#There was no significant difference in TcPCO@*CONCLUSIONS@#Lower electrode temperatures (38-41℃) can accurately measure blood carbon dioxide partial pressure in very low birth weight infants, and thus can be used to replace the electrode temperature of 42°C. Transcutaneous measurements at the lower electrode temperatures may be helpful for understanding the changing trend of blood oxygen partial pressure.
Тема - темы
Humans , Infant , Infant, Newborn , Blood Gas Monitoring, Transcutaneous , Carbon Dioxide , Electrodes , Infant, Very Low Birth Weight , Oxygen , Partial Pressure , TemperatureРеферат
In order to obtain comprehensive brain activity information conveniently in real time, this study designs a portable EEG and blood oxygen synchronous acquisition system for real-time monitoring of brain functional activities. The EEG electrodes filter and amplify the detected EEG signals, and send them to the microprocessor via Bluetooth to analyze the EEG data; the photoelectric probe converts the optical signals into electrical signals, which are amplified and separated, filtered, and AD converted, calculates the brain's oxygenation and blood-red protein (ΔHbO
Тема - темы
Brain , Electrodes , Electroencephalography , OxygenРеферат
Resumen Introducción: en los procedimientos de extracción de electrodos, la vía femoral se usa cuando la vía superior ha fracasado. Objetivo: describir la incidencia, el éxito, las complicaciones y los predictores de uso de la vía femoral. Métodos: se realizó un análisis de la incidencia del uso de la vía femoral y los factores predictores en pacientes a quienes se les realizó extracción de electrodos entre noviembre de 2011 y noviembre de 2017. Resultados: se incluyeron 85 pacientes, con edad media de 62,36 ± 11,15 años. El 38,9% de los dispositivos eran marcapasos. Se extrajeron 135 electrodos, 59,3% de fijación pasiva. La mediana de tiempo desde el implante fue de 102 (60-174) meses. Se empleó la ruta femoral en el 25,9% de los procedimientos. Se obtuvo éxito clínico en el 92,9% de los pacientes. La extracción no fue exitosa en el 22,7% de los procedimientos cuando se usó la vía femoral, en comparación con el 1,6% cuando se usó la vía superior (p 0,004). La extracción no fue completa en el 36,4% de los procedimientos cuando se empleó la vía femoral en comparación con el 9,5% por vía superior (p 0,007). Los factores que predijeron el empleo de la ruta femoral fueron la presencia de electrodos de fijación pasiva [OR IC 95% 13,69 (3,06-62,5) p 0,001] y el tiempo desde el implante del electrodo [OR IC 95% por cada 10 meses 1,04 (1,00-1,09) p 0,044]. Conclusiones: se empleó la ruta femoral en el 25,9% de los procedimientos. No fue eficaz en el 22,7% de las intervenciones. Los factores que predijeron su utilización fueron la presencia de electrodos de fijación pasiva y el tiempo desde el implante del electrodo.
Abstract Introduction: The femoral route is used in electrode removal procedures when the upper route has failed. Objective: To describe the incidence, success rate, complications and predictive factors for the use of the femoral route. Methods: An analysis was performed on the incidence of use of the femoral route and the predictive factors in patients in whom electrode removal was carried out between November 2011 and November 2017. Results: The study included 85 patients with a mean age of 62.36 ± 11.5 years. Pacemakers made up 38.9% of the devices. A total of 135 electrodes, 59.3% of passive fixation, were removed. The median time since the implant was 102 (60-174) months. The femoral route was used in 25.9% of the procedures. Clinical success was achieved in 92.9% of the patients. The removal was not successful in 22.7% of the procedures when the femoral route was used, compared to 1.6% when the upper route was used (P = .004). The removal was not completed in 36.4% of the procedures when the femoral route was used, compared to 9.5% with the upper route (P = .007). The factors that predicted the use of the femoral route were the presence of passive-fixation electrodes (OR = 13.69: 95% CI; 3.06 - 62.5, P = .001), and the time since the electrodes were implanted (OR = 1.04, 95% CI; 1.00 - 1.09, P = .044, for every 10 months). Conclusions: The femoral route was employed in 25.9% of the procedures. It was not effective in 22.7% of the interventions. The factors that predicted its use were the presence of passive-fixation electrodes and the time since the electrode implant.
Тема - темы
Humans , Male , Middle Aged , Electrodes , Femoral Vein , Incidence , Equipment and SuppliesРеферат
Introducción: este artículo presenta la predicción de tres tipos de movimientos básicos de la mano mediante un algoritmo inteligente para extraer características imprescindibles para el reconocimiento de patrones de movimiento a partir del análisis de señales electromiográficas superficiales adquiridas con el dispositivo Myo. Objetivo: reconocer y predecir patrones básicos de movimiento de la articulación del brazo utilizando electromiografía de superficie para aplicarlo sobre un prototipo de prótesis. Métodos: se tomaron datos de 13 estudiantes de 22 y 23 años de la Universidad Politécnica Salesiana, cada uno de los cuales ejecutó tres tipos de agarre: cilíndrico, pinza y pinza planar. Se trabajó con una frecuencia de 10 Hz y se tomaron 5 muestras por tipo de agarre durante 60 segundos. Para el análisis estadístico de los datos se utilizó la herramienta Anova, estableciendo un valor de significancia mayor a 0,65. Resultados: En ciertos voluntarios hay una mayor reacción en el electrodo 1 debido a que su antebrazo es mayor. El tiempo de respuesta para el reconocimiento varía dependiendo del número de variables que se tenga que comparar. Cuando se analiza un solo movimiento es de 2,6 segundos, en cambio, cuando se analizan los 3 movimientos el tiempo de respuesta incrementa a 7,8 segundos por la cantidad de electrodos que se quieran analizar. Conclusiones: la respuesta del sistema propuesto empieza a ser más lenta a medida que se analizan más movimientos a la vez y por tanto, es menos efectiva. El tiempo de ejecución y respuesta de nuestro sistema, en comparación al estado del arte, es más alto, debido a que se utilizan menos métodos de caracterización de la señal. Adicionalemtne, una limitante del proyecto es la frecuencia de muestreo del dispositivo Myo (200Hz)(AU)
Introduction: the paper presents the prediction of three basic hand movement types by means of a smart algorithm to draw characteristics indispensable for identification of movement patterns based on the analysis of surface electromyographic signals obtained with the Myo device. Objective: recognize and predict basic movement patterns of the arm joint using surface electromyography with a view to applying them over a prosthesis prototype. Methods: data were taken from 13 students aged 22 and 23 years from the Salesian Polytechnic University, each of whom performed three types of grasp: cylindrical, pincer and palmar pincer. A 10 Hz frequency was used and 5 samples were taken of each grasp type during 60 seconds. Statistical analysis was performed with the tool ANOVA, establishing a significance value > 0.65. Results: in certain volunteers a greater reaction was observed in electrode 1, due to their larger forearms. Response time for identification varies with the number of variables to be compared. When only one movement is analyzed, response time is 2.6 seconds, but when the three movements are examined it rises to 7.8 seconds by the number of electrodes intended to be studied. Conclusions: the response of the system proposed starts to slow down as more movements are analyzed simultaneously, which makes it less effective. The performance and response time of our system is higher than in state-of-the-art systems, since fewer signal characterization methods are used. On the other hand, a limitation of the project is the sampling frequency of the Myo device (200 Hz)(AU)