摘要
As arsenic widely exists in nature and has been used in the pharmaceutical preparations, the traditional Chinese medicine(TCM) with arsenic include realgar(As_2S_2 or As_4S_4), orpiment(As_2S_3), and white arsenic(As_2O_3). Among the above representative medicine, the TCM compound formulas with realgar are utilized extensively. Just in Chinese Pharmacopoeia(2020 edition), there are 37 Chinese patent medicines including realgar. The traditional element analysis focuses on the detection of the total amount of elements, which neglects the study on the speciation and valence of elements. The activity, toxicity, bioavailability, and metabolic pathways of arsenic in vivo are closely related to the existence of its form, and different forms of arsenic have different effects on organisms. Therefore, the study on the speciation and valence of arsenic is of great importance for arsenic-containing TCMs and their compound formulas. This paper reviewed four aspects of the speciation and valence of arsenic, including property, absorption and metabolism, toxicity, and analytical assay.
Subject(s)
Arsenic/analysis , Arsenicals/analysis , Sulfides , Arsenic Trioxide , Medicine, Chinese Traditional , Drugs, Chinese Herbal/analysis , Biological Products摘要
Fermented Chinese medicine has long been used. Amid the advance for preservation of experience, the connotation of fermented Chinese medicine has been enriched and improved. However, fermented Chinese medicine prescriptions generally contain a lot of medicinals. The fermentation process is complicated and the conventional fermentation conditions fail to be strictly controlled. In addition, the judgment of the fermentation end point is highly subjective. As a result, quality of fermented Chinese medicine is of great difference among regions and unstable. At the moment, the quality standards of fermented Chinese medicine are generally outdated and different among regions, with simple quality control methods and lacking objective safe fermentation-specific evaluation indictors. It is difficult to comprehensively evaluate and control the quality of fermented medicine. These problems have aroused concern in the industry and also affected the clinical application of fermented Chinese medicine. This article summarized and analyzed the application, quality standards, and the modernization of fermentation technology and quality control methods of fermented Chinese medicine and proposed suggestions for improving the quality standards of the medicine, with a view to improving the overall quality of it.
Subject(s)
Medicine, Chinese Traditional , Reference Standards , Quality Control , Fermentation摘要
This review made a systematic textual research on the historical evolution and changes of the origin, producing areas and quality, harvest time and processing methods, and cultivation technique of Poria in famous classical formulas from the Catalogue of Ancient Famous Classical Formulas (the First Batch) by referring to the literature of ancient materia medica and medical books combining with the modern literature in CNKI, Wanfang Data and other databases, which could provide reference for the development and research of the famous classical formulas containing Poria. According to the research, the origin of Poria in ancient times was the dried sclerotia of Poria cocos. The producing area of Poria is widely distributed in China, mainly produced in Anhui, Hubei, Henan and Yunnan provinces. The quality of Poria from Yunnan is better, and the yield is larger in Anhui and Hubei provinces. The quality evaluation of Poria is basically the same from ancient to modern, which has the characteristics of large block, heavy weight, thin and wrinkled skin, and white and delicate cross section. The harvesting period of Poria is usually in August of the lunar calendar. The initial processing has undergone the evolution from drying in shade in the ancient time to drying in shade after sweating in the modern time. From ancient times to the present, Poria has been processed by cutting to prepare the Fuling lumps and Fuling slices. The cultivation technique has experienced the evolution process of "wild Poria-inoculation of live pine root-basswood cultured". At present, Poria is mainly cultivated by artificial basswood with mature technical methods and abundant yields, which can meet the research and development needs of the famous classical formulas.
摘要
Classical prescriptions are precious wealth left by ancient Chinese medical scientists. Moreover,they are also the important part of the treasure-house in Chinese medicine. Classical prescriptions have a long and rich history for human-use in China and play an important role in keeping people healthy. The state administration of traditional medicine of China published the Catalogue of Classical Prescriptions(first batch) in 2018. This measure has inspired the enthusiasm of Chinese medicine manufacturers to study ancient classical prescriptions and develop classical compound prescriptions. Based on the first batch of classical prescriptions, the dosage forms, sources, prescription components, decocting degree, use of toxic drugs and processing methods of classical prescriptions. The results showed that most of the classical prescriptions in the first batch were decoction and boiled powder,while only four of them were powder and paste forms,all of which were originated from representative classics in the past dynasties. The dosage and decocting degree of decoction were greater than those of boiled powder. The dosage and decocting degree of decoction in Han and Tang Dynasties was close to that in Ming and Qing Dynasties,higher than that in Song and Jin Dynasties. Moreover,the average number of herbs in the prescriptions in Han Dynasty was the smallest. The use of toxic traditional Chinese medicine was the most frequent in Han Dynasty, and Pinellia ternata was the most common toxic medicine. There were various processing methods, including cleansing, cutting, stir-frying, roasting and so on. In this paper, the dosage forms of traditional paste, the time concept of decoction in the ancient times, the traditional roasting method and the processing method of toxic drugs were summarized to provide ideas and reference for further development of classical prescriptions.
Subject(s)
China , Drugs, Chinese Herbal , Reference Standards , Medicine, Chinese Traditional摘要
Objective: To investigate the effect of varying concentrations of polyethylene glycol(PEG)400 in receiving solution on in vitro transdermal test of drugs. Method: 5-Fluorouracil(5-FU) was selected as a model drug,by preparing different concentrations of PEG400-phosphate buffer solution(PBS) as the receiving solution,the receiving chamber did not add drug,the excised rat skins were treated with various additives for 12 h,then replaced by PBS and added the saturated model drug into the donor compartment to determine the transdermal parameters of the drug.Meanwhile,scanning electron microscopy(SEM) was employed to monitor the effect of PEG400 with different concentration on the stratum corneum of rat skin. Result: The 10%,15% and 40% PEG400-PBS groups had no significant effect on in vitro transdermal absorption parameters of the 5-FU.The steady transdermal rate and cumulative penetration rate of the drug in 20% and 30% PEG400-PBS groups were significantly higher than that in the PBS group(PPConclusion: In the rat skin transdermal test,the concentration of PEG400 in receiving solution should be controlled below 20%.
摘要
Objective To optimize ambi-extracting and inclusion process of volatile oil from Chuanxiong Rhizoma and Angelicae Sinensis Radix. Methods With yield ratio of volatile oil and ferulic acid content in water extract as evaluation indexes, single factor experiments were used to study the extraction process. With the inclusion rate of volatile oil and yield of inclusion as evaluation indexes, saturated aqueous solution was used to L9(34) orthogonal experiments to reach optimum inclusion process. Results The optimum extraction process of Chuanxiong Rhizoma and Angelicae Sinensis Radix was extracted for 8 hours with 8 folds the amount of water, and without soaking. The validation experiments of extraction of volatile oil and ferulic acid content in water extract were 1.23 mL and 0.387 9 mg/g. The optimum conditions of inclusion process were as follows: volatile oil (mL): β-CD (g) was 1:8;inclusion temperature was 40 ℃; inclusion time was 3 hours. The validation experiments of inclusion rate of volatile oil and yield of inclusion were 74.89% and 72.81%. Conclusion Optimum ambi-extracting and inclusion process of volatile oil from Chuanxiong Rhizoma and Angelicae Sinensis Radix are feasible and stable, witch can provide certain supporting data for preparation production.
摘要
Objective To optimize the extraction and alcohol precipitation process of Qizhi Yifei Granules by multi index orthogonal experiment. Methods With extraction rate of astragaloside in Astragali Radix, quercetin-3-O-β-D-glucose-7-O-β-D-gentian diglucoside in Descurainiae Semen Lepidii Semen and yield rate of dry extract as indexes, the extraction process of Qizhi Yifei Granules was optimized. Taking the retention rate of astragaloside and quercetin-3-O-β-D-glucose-7-O-β-D-gentian diglucoside as indexes, the alcohol precipitation process was optimized. Results The best water extraction process was as follows: adding 10 times amount of water, extracting for 1.5 h, 3 times. The optimum alcohol precipitation process was: concentrated to the relative density of 1.05–1.10 (60 ℃), adding ethanol to 60% and alcohol precipitation. Conclusion The optimized extraction and alcohol precipitation process is stable and feasible, which can provide the basis for the preparation.
摘要
As the carrier of water-insoluble drugs, microspheres can play a role in increasing solubility and delaying releasing essence. The objective of this study was to improve the solubility and to delay the release of a newly discovered antitumor compound 3β-hydroxyolea-12-en-28-oic acid-3, 5, 6-trimethylpyrazin-2-methyl ester (T-OA). Early-stage preparation discovery concept (EPDC) was employed in the present study. The preparation, physicochemical characterization, and drug release properties of PLGA microspheres were evaluated. T-OA-loaded PLGA microspheres were prepared by an oil-in-water (O/W) emulsification solvent evaporation method. Characterization and release behaviors of the T-OA PLGA microspheres were evaluated by X-ray diffract (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high performance liquid chromatography (HPLC). The results demonstrated that T-OA-loaded PLGA microspheres could be successfully obtained through solvent evaporation method with appropriate morphologic characteristics and high encapsulation efficiency. The XRD analysis showed that T-OA would be either molecularly dispersed in the polymer or distributed in an amorphous form. The DSC and FTIR analysis proved that there were interactions between T-OA and PLGA polymer. SEM observations displayed the morphology of the microspheres was homogeneous and the majority of the spheres ranged between 50 and 150 μm. The drug release behavior of the microspheres in the phosphate buffered saline medium exhibited a sustained release and the duration of the release lasted for more than 23 days, which was fit with zero-order release pattern with r = 0.9947. In conclusion, TOA-loaded PLGA microspheres might hold great promise for using as a drug-delivery system in biomedical applications.
Subject(s)
Antineoplastic Agents , Chemistry , Calorimetry, Differential Scanning , Chemistry, Pharmaceutical , Delayed-Action Preparations , Chemistry , Drug Carriers , Chemistry , Lactic Acid , Chemistry , Microscopy, Electron, Scanning , Microspheres , Oleanolic Acid , Chemistry , Polyglycolic Acid , Chemistry , Polylactic Acid-Polyglycolic Acid Copolymer , Pyrazines , Chemistry , Solubility , Spectroscopy, Fourier Transform Infrared , X-Ray Diffraction摘要
Ischemic brain injury is a major disease which threatens human health and safety. (3, 5, 6-trimethylpyrazin-2-yl) methyl 3-methoxy-4-[(3, 5, 6-trimethylpyrazin-2-yl) methoxy] benzoate (VA-T), a newly discovered lead compound, is effective for the treatment of ischemic brain injury and its sequelae. But the poor solubility of VA-T leads to poor dissolution and limited clinical application. In order to improve the dissolution of VA-T, the pharmaceutical technology of solid dispersions was used in the present study. VA-T/polyvinylpyrrolidone (PVP) solid dispersion was prepared by the solvent method. The dissolution studies were carried out and solid state characterization was evaluated by differential scanning calorimetry (DSC), infrared spectroscopy (IR), x-ray diffraction (XRD) and scanning electron microscopy (SEM). The dissolution rate of VA-T was significantly improved by solid dispersion compared to that of the pure drug and physical mixture. The results of DSC and XRD indicated that the VA-T solid dispersion was amorphous. The IR spectra showed the possible interaction between VA-T and PVP was the formulation of hydrogen bonding. The SEM analysis demonstrated that there was no VA-T crystal observed in the solid dispersions. The ideal drug-to-PVP ratio was 1:5. In conclusion, the solid dispersion technique can be successfully used for the improvement of the dissolution profile of VA-T.
Subject(s)
Benzoates , Chemistry , Brain Ischemia , Drug Therapy , Chemistry, Pharmaceutical , Methods , Drug Delivery Systems , Povidone , Chemistry , Solubility摘要
To establish an appropriate experimental and data processing method on the basis of the general kinetic model for extraction of traditional Chinese medicines, in order to study the effect of total flavonoids in water extracts from Puerariae Radix on the adaptability of the model, with total flavonoids of Puerariae Radix as the determination indicator. The results showed that the natural logarithm of mass concentration of total flavonoids showed a good linearity with the changes in extraction time and solvent volume. Through calculating and fitting, we successfully established the kinetic model for water extraction of total flavonoids from Puerariae Radix, and verified its accuracy. Its good fitting degree and controllable deviation within the range of industrial production requirements indicated a good adaptability of the model. However, its equation correction factors require further studies.