摘要
AIM: To compare the clinical efficacy of conbercept and aflibercept in the treatment of wet age-related macular degeneration(wARMD)based on 4 consecutive intravitreal injections.METHODS: The clinical data of 108 patients(108 eyes)who were diagnosed as wARMD and treated with intravitreal injection at our hospital from January 2019 to January 2021 were retrospectively analyzed. They were divided into conbercept group(54 cases, 54 eyes)and aflibercept group(54 cases, 54 eyes)according to the different injectable drugs. All patients received intravitreal injection once a month, with four consecutive injections. Follow up for 12mo to observe best corrected visual acuity(BCVA), central macular thickness(CMT), complications and recurrence before and after injection.RESULTS: BCVA and CMT of patients in the two groups at 1, 2, 5 and 8mo after injection had no between-group differences(P>0.05), but both were significantly improved compared with those before injection(P<0.05). By the end of follow-up, conjunctival hemorrhage occurred in 2 eyes of the conbercept group at the early stage, and increased intraocular pressure and conjunctival hemorrhage occurred respectively in 2 eyes of the aflibercept group. There were no serious complications related to drug injection such as retinal detachment, complicated cataract, endophthalmitis and retinal pigment epithelial tear in the two groups, and there was no difference in the recurrence rate between the two groups(7% vs. 6%, P=1.000).CONCLUSION: On the basis of continuous 4 times of intravitreal injection, both conbercept and aflibercept are safe and effective in the treatment of wARMD, and the efficacy is even.
摘要
Objective To propose a method for predicting weaning outcomes based on machine learning and electrical impedance tomography(EIT).Methods Firstly,EIT image features were extracted from a total of 84 samples from 30 patients,and the important features screened with the extreme gradient boosting(XGBoost)algorithm were used as inputs to the model.Secondly,the prediction model was built with six machine learning methods,namely random forest(RF),support vector machines(SVM),XGBoost,gradient boosting decision tree(GBDT),logistic regression(LR)and decision tree(tree).Then the prediction model had its prediction performance evaluated by AUC,accuracy,sensitivity and specificity under imbalanced dataset,over-sampling balanced dataset and random under-sampling balanced dataset.Results In terms of AUC,accuracy and specificity,the model under the over-sampling balanced dataset and the random under-sampling balanced dataset behaved better than that under the imbalanced dataset(P<0.05);in terms of sensitivity,the difference in model performance between the over-sampling balanced dataset and the imbalanced dataset was not statistically significant(P>0.05),and the model performance under the random under-sampling balanced dataset decreased when compared with that under the imbalanced dataset(P<0.05).There were no significant differences between the model performance under the over-sampling balanced dataset and that under the random under-sampling balanced dataset(P>0.05).The model based on XGBoost behaved the best under the over-sampling balanced dataset,with an AUC of 0.769,an accuracy of 0.808,a sensitivity of 0.938 and a specificity of 0.600.Conclusion The method based on machine learning and EIT predicts weaning outcomes of patients with prolonged mechanical ventilation,and thus can be used for auxiliary decision support for clinicians to determine the appropriate timing of weaning.[Chinese Medical Equipment Journal,2023,44(10):1-6]
摘要
Aim To study the mechanism and target of apoptosis induced by berberine ( BBR) in cervical cancer HeLa cells. Methods Drug affinity responsive target stability (DARTS) and mass spectrometry (MS) were used to identify the potential binding proteins of berberine. The binding affinity between berberine and candidate target protein was detected by microscale thermophoresis technique (MST) , and cellular thermal shift assay (CETSA) was used to detect the binding of berberine to candidate target proteins in living cells. CRISPR/Cas9 gene editing technique was used to establish candidate target protein TRIM25-deficient tumor cell lines. CCK-8 assay and Annexin V/propidium iodide combined with flow cytometry were used to detect the inhibitory and apoptotic effects of berberine on wild-type and TRIM25-KO cells. Western blot was used to detect the effect of berberine on TRIM25 and its substrate protein levels.Results DARTS found that after berberine treatment, the sensitivity of TRIM25 to pronase proteolysis showed the most significant change. MST and CETSA assays showed that berberine directly bound to TRIM25 at molecular and cellular levels, and its dissociation constant was 4.02 μmol • L
摘要
Cancer-associated fibroblasts (CAF) are a key component of the tumor microenvironment, which can secrete a variety of cytokines, chemokines and growth factors, directly and indirectly support cancer cells, also alter the immune cellular environment by inhibiting the activity of immune effector cells and recruiting immunosuppressive cells, thereby allowing cancer cells to evade immune surveillance. CAF has been proven to be associated with the development, progression, and poor prognosis of solid tumors. However, the role of CAF in hematological malignancies is still unclear. This article reviews the research progress of CAF in hematological malignancies.
Subject(s)
Humans , Cancer-Associated Fibroblasts/pathology , Neoplasms/metabolism , Hematologic Neoplasms/metabolism , Tumor Microenvironment , Fibroblasts/pathology摘要
Objective: To explore the feasibility on the preparation of novel negative pressure materials for constructing new matrix of full-thickness skin defect wounds in rats. Methods: The experimental research method was applied. The microstructure of polyurethane foam dressing which was commonly used in negative pressure treatment was observed under scanning electron microscope, and its pore diameter was detected (n=5). Polycaprolactone (PCL) and polybutylene succinate (PBS) were used respectively as raw materials for the preparation of PCL and PBS negative pressure materials by melt spinning technology, with the measured pore diameter of polyurethane foam dressing as the spinning spacing at the spinning rates of 15, 25, and 35 mm/s, respectively. The microstructures of the prepared negative pressure materials were observed under scanning electron microscope, and their fiber diameters were measured. The tensile strength and tensile modulus of the prepared negative pressure materials and polyurethane foam dressing were measured by tensile testing machine and composite testing machine, respectively (n=5), to screen the spinning rate for subsequent preparation of negative pressure materials. Human skin fibroblasts (Fbs) in logarithmic growth phase were co-cultured with PCL negative pressure material and PBS negative pressure material prepared at the selected spinning rate, respectively. After 1, 4, and 7 day (s) of co-culture, the cell activity and adhesion in the materials was detected by living/dead cells detection kit, and the cell proliferation level in the materials was detected by cell counting kit 8 method (n=5). A full-thickness skin defect wound was prepared on the back of 18 5-6 weeks old Sprague-Dawley rats (gender unlimited). Immediately after injury, the injured rats were divided into PCL+polyurethane group, PBS+polyurethane group, and polyurethane alone group according to the random number table (with 6 rats in each group). The wounds were covered with materials containing corresponding component and performed with continuous negative pressure suction at the negative pressure of -16.7 kPa. The wound tissue along with materials directly contacted to the wound (hereinafter referred to as wound specimens) were collected from 3 rats in each group after 7 and 14 days of negative pressure treatment (NPT), respectively. The growth of granulation tissue and the attachment of material to wound surface were observed after hematoxylin-eosin staining, the collagen fiber deposition was observed after Masson staining, and CD34 and interleukin-6 (IL-6) positive cells were detected and counted by immunohistochemical staining. Data were statistically analyzed with one-way analysis of variance, analysis of variance for factorial design, least significant difference-t test, Kruskal-Wallis H test, Mann-Whitney U test, and Bonferroni correction. Results: The microstructure of polyurethane foam dressing was loose and porous, with the pore diameter of (815±182) μm. The spinning spacing for the subsequent negative pressure material was set as 800 μm. The microstructures of PBS negative pressure material and PCL negative pressure material were regular, with vertically interconnected layers and continuous fibers in even thickness, but the fibers of PBS negative pressure material were straighter than those of PCL negative pressure material. There was no obvious difference in the microstructure of negative pressure materials prepared from the same raw material at different spinning rates. The fiber diameters of PCL negative pressure materials prepared at three spinning rates were similar (P>0.05). The fiber diameters of PBS negative pressure materials prepared at spinning rates of 25 mm/s and 35 mm/s were significantly smaller than the fiber diameter of PBS negative pressure material prepared at the spinning rate of 15 mm/s (with t values of 4.99 and 6.40, respectively, P<0.01). Both the tensile strength and tensile modulus of PCL negative pressure materials prepared at three spinning rates were similar (P>0.05). The tensile strength of PBS negative pressure materials prepared at spinning rates of 15 mm/s and 25 mm/s was significantly lower than that of PBS negative pressure materials prepared at the spinning rate of 35 mm/s (with t values of 9.20 and 8.92, respectively, P<0.01), and the tensile modulus was significantly lower than that of PBS negative pressure materials prepared at the spinning rate of 35 mm/s (with t values of 2.58 and 2.47, respectively, P<0.05). Subsequently, PCL negative pressure material was prepared at the spinning rate of 35 mm/s, and PBS negative pressure material was prepared at the spinning rate of 15 mm/s. After 1, 4, and 7 day (s) of co-culture, the number of human skin Fbs that adhered to PCL negative pressure material and PBS negative pressure material increased with time, and there was no significant difference between the two materials. After 1 and 7 day (s) of co-culture, the proliferation levels of human skin Fbs between the two negative pressure materials were similar (P>0.05). After being co-cultured for 4 days, the proliferation level of human skin Fbs in PBS negative pressure material was significantly higher than that in PCL negative pressure material (t=6.37, P<0.01). After 7 days of NPT, the materials were clearly identifiable and a small amount of collagen fibers were also observed in the wound specimens of rats in the three groups; a small amount of granulation tissue was observed in the wound specimens of rats in polyurethane alone group. After 14 days of NPT, a large number of granulation tissue and collagen fibers were observed in the wound specimens of rats in the three groups; the materials and wound tissue in the wound specimens of rats in PCL+polyurethane group could not be clearly distinguished. After 7 and 14 days of NPT, the collagen fibers in the wound specimens of rats in polyurethane alone group were denser than those in the other two groups. After 7 days of NPT, the number of CD34 positive cells in the wound specimens of rats in PBS+polyurethane group was 14.8±3.6 per 400 times visual field, which was significantly less than 27.8±9.1 in polyurethane alone group (t=3.06, P<0.05); the number of IL-6 positive cells was 60 (49, 72), which was significantly more than 44 (38, 50) in polyurethane alone group (Z=2.41, P<0.05). After 14 days of NPT, the number of IL-6 positive cells in the wound specimens of rats in PBS+polyurethane group was 19 (12, 28) per 400 times visual field, which was significantly more than 3 (1, 10) in PCL+polyurethane group and 9 (2, 13) in polyurethane alone group (with Z values of 2.61 and 2.40, respectively, P<0.05). Conclusions: The prepared PCL negative pressure material and PBS negative pressure material have good biocompatibility, and can successfully construct the new matrix of full-thickness skin defect wounds in rats. PCL negative pressure material is better than PBS negative pressure material in general.
Subject(s)
Animals , Humans , Rats , Collagen , Feasibility Studies , Interleukin-6 , Polyurethanes , Rats, Sprague-Dawley , Skin Abnormalities , Soft Tissue Injuries , Wound Healing摘要
Chronic wounds have always been a tough fight in clinical practice, which can not only make patients suffer from pain physically and mentally but also impose a heavy burden on the society. More than one factor is relevant to each step of the development of chronic wounds. Along with the in-depth research, we have realized that figuring out the pathophysiological mechanism of chronic wounds is the foundation of treatment, while wound infection is the key point concerned. The cause of infection should be identified and prevented promptly once diagnosed. This paper mainly describes the mechanism, diagnosis and therapeutic strategies of chronic wound infection, and will put an emphasis on the principle of debridement.
Subject(s)
Humans , Chronic Disease , Debridement , Wound Infection/therapy摘要
Objective To investigate the treatment effect of hollow fiber ultrafiltration technology on hemolytic samples and the differences between IgE concentration and serum concentration before hemolysis in ultrafiltrate. Methods The 33 postmortem blood samples of non-frozen corpses within 72 hours after death were collected, 4 mL blood was taken from each case, among which 1 mL was centrifuged to get serum, and the remaining 3 mL blood was frozen-thawed 3-5 times to cause complete hemolysis. The 2 mL hemolytic samples were processed by hollow fiber ultrafiltration to obtain ultrafiltrate. The hemoglobin concentration in serum, complete hemolytic sample and ultrafiltrate was determined by Van-Zij solution-cyanated methemoglobin assay method, and the total IgE in serum and ultrafiltrate was determined by electrochemical luminescence method. Results The hemoglobin concentration in ultrafiltrate was significantly lower than that in complete hemolytic samples (P<0.05). There was a good correlation between the total IgE detection values of ultrafiltrate and serum (r=0.984). The difference between the serum and the value of IgE in ultrafiltrate after correction had no statistical significance, and the differences between the two in positive rates had no statistical significance (P>0.05). Conclusion Ultrafiltration technology has a good treatment effect on complete hemolytic samples, and the correction value of ultrafiltrate detection is close to the serum level before hemolysis, and therefore, it can be applied to the detection of total IgE of frozen corpse hemolytic samples.
Subject(s)
Humans , Autopsy , Hemolysis , Immunoglobulin E/analysis , Serum , Ultrafiltration摘要
Objective To investigate the safety and efficacy of ureteral access sheath (UAS) with vacullm suction during flexible ureteroscopy lithotripsy in treatment of renal stones. Methods 96 cases of renal stones patients who received flexible ureteroscopy lithotripsy were retrospectively analyzed and divided into two groups:control group with 50 cases and treatment group with 46 cases. The stones free rate, operation time, intrapelvic pressure, renal colic, formation of steinstrasse, SIRS, Calcitonin Zymogen, leukocyte count, hospitalization time, hospitalization costs and treatment efficiency were evaluated after one month. Results The average, maximum and minimum intrapelvic pressure of treatment group was much lower than that of control group (P < 0.05); After one month, the treatment efficiency and stones free rate of control group was 70.0% and 82.0%, lower than that of treatment group (P < 0.05); The operation time of control group and treatment group was(108.6 ± 3.5) min, (86.3 ± 5.2) min (P < 0.05); The cases of renal colic, steinstrasse and SIRS of control group after treatment was 13 cases, 11 cases, 10 cases which was more than that of treatment group with 2 cases respectively (P < 0.05); The hospitalization time, hospitalization costs of control group and treatment group was (8.8 ± 1.1) d, (23 067.5 ± 392.8) RMB and (7.7 ± 1.2) d, (21 957.3 ± 378.6) RMB (P < 0.05); The Calcitonin Zymogen, leukocyte count of control group and treatment group was (1.5 ± 0.3) and (0.3 ± 0.1) ng/ml, (14.6 ± 0.5)×109/L and (6.4 ± 0.6)×109/L (P < 0.05). Conclusion The application of ureteral access sheath with vacullm suction during flexible ureteroscopy lithotripsy in treatment of renal stones was simple, safe and effective, and can shorten the operation time, improve the rate of clearing stone and treatment efficiency, reduce the incidence of adverse reactions. The application can be extended.
摘要
Intraocular pressure ( IOP ) is a pressure applied to the wall of the eye by equilibrium, which is ranging in a normal shape. Our visual function will be damaged if it brokes the normal high value. In recent years, several researchers had found the potential relationship between the IOP and our daily lifestyle. This review will show the specific relationship between them and it also will provide some important guidelines to the patients with high IOP in some degree.
摘要
Myopia is the most important cause of visual impairment in adolescents. However, its etiology is complex. In recent years, a large number of epidemiological studies have been done on risk factors of myopia. Most of these studies is cross- sectional study, not longitudinal cohort study. Overall, the incidence of myopia is the result of the interaction between genetic susceptibility and environmental exposure. This review is about the risk factors for myopia.
摘要
L9 (3(4)) orthogonal experiment was used to design the extraction technology of compound Clematidis Radix spray. Weight coefficients of active ingredients and dry extract rate were solved by information entropy. Support vector machine (SVM) was established and the model parameters were optimized through the genetic algorithm. Grid search algorithm was used for optimization of extraction technology of Clematidis Radix spray. The optimal extraction technology was to extract Clematidis Radix spray in water with 6 times the weight of herbal medicine for 3 times, with 2 h once. Bias of value between real and predicted by SVM was 1.23%. SVM was compared with traditional intuitive analysis of orthogonal design. It indicates that the new method used to optimize the extraction parameters of compound Clematidis Radix spray is more accurate and reliable.