摘要
OBJECTIVES@#To explore the difference in CT values between pulmonary thromboembolism and postmortem clot in postmortem CT pulmonary angiography (CTPA) to further improve the application value of virtual autopsy.@*METHODS@#Postmortem CTPA data with the definite cause of death from 2016 to 2019 were collected and divided into pulmonary thromboembolism group (n=4), postmortem clot group (n=5), and control group (n=5). CT values of pulmonary trunk and left and right pulmonary artery contents in each group were measured and analyzed statistically.@*RESULTS@#The average CT value in the pulmonary thromboembolism group and postmortem clot group were (168.4±53.8) Hu and (282.7±78.0) Hu, respectively, which were lower than those of the control group (1 193.0±82.9) Hu (P<0.05). The average CT value of the postmortem clot group was higher than that of the pulmonary thromboembolism group (P<0.05).@*CONCLUSIONS@#CT value is reliable and feasible as a relatively objective quantitative index to distinguish pulmonary thromboembolism and postmortem clot in postmortem CTPA. At the same time, it can provide a scientific basis to a certain extent for ruling out pulmonary thromboembolism deaths.
Subject(s)
Humans , Autopsy , Thrombosis , Pulmonary Embolism/diagnostic imaging , Tomography, X-Ray Computed , Angiography , Cadaver摘要
The finite element method (FEM) is a mathematical method for obtaining approximate solutions to a wide variety of engineering problems. With the development of computer technology, it is gradually applied to the study of biomechanics of human body. The application of the combination of FEM and biomechanics in exploring the relationship between vascular injury and disease, and pathological mechanisms will be a technological innovation for traditional forensic medicine. This paper reviews the construction and development of human vascular FEM modeling, and its research progress on the vascular biomechanics. This paper also looks to the application prospects of FEM modeling in forensic pathology.
Subject(s)
Humans , Computer Simulation , Models, Biological , Biomechanical Phenomena , Finite Element Analysis , Forensic Medicine摘要
OBJECTIVES@#To explore the application value of virtual autopsy to obtain key evidence information on drowned corpses and its application value of virtual autopsy in the diagnosis of drowning.@*METHODS@#In this study, 7 corpses were selected as the research objects. The image data of corpses were collected by computed tomography (CT) before conventional autopsy. The characteristics of corpses were observed through image reading, combined with virtual measurement indexes, and compared with 15 non-drowned corpses.@*RESULTS@#The postmortem CT of drowning showed the more fluid in respiratory tract than the non-drowning, and ground-glass opacities in the lung. The statistical volume of fluid in the sinus (maxillary sinus and sphenoid sinus) was (10.24±4.70) mL in drowning cases and (2.02±2.45) mL in non-drowning cases. The average CT value of fluid in the sinus, left atrial blood and gastric contents in drowning cases were (15.91±17.20), (52.57±9.24) and (10.33±12.81) HU, respectively, which were lower than those in non-drowning cases (P<0.05).@*CONCLUSIONS@#The comprehensive consideration of multiple characteristic image manifestations and the virtual measurement indexes are helpful to the forensic pathological diagnosis of drowning. Virtual autopsy can be used as an auxiliary method in the forensic diagnosis of drowning.
Subject(s)
Humans , Autopsy/methods , Cadaver , Drowning/diagnostic imaging , Forensic Pathology/methods , Tomography, X-Ray Computed/methods摘要
Objective Based on the theory of biomechanics, the finite element method was used to study the injury characteristics of different parts of brain hit by fist with different force and to predict the risk of craniocerebral injury, in order to provide reference for actual medical protection and forensic identification. Methods The finite element model of fist was constructed by using DICOM data modeling method and related software, and the effective mass and speed of fist were used to represent the kinetic energy of fist, and combined with human finite element model THUMS 4.02, the characteristics of craniocerebral injury caused by frontal and lateral blows were parametrically simulated. Results The probability of direct death from a blow to the head was low, but as fist power increased, so did the risk of craniocerebral injury. The characteristics of craniocerebral injury were also significantly different with the different fist hitting head locations. When the frontal area was attacked, the maximum equivalent stress of skull was 122.40 MPa, while that of brain tissue was 4.31 kPa. When the temporal area was attacked, the maximum equivalent stress of skull was 71.53 MPa, while that of brain tissue was 7.09 kPa. Conclusion The characteristics and risks of skull fracture and brain tissue injury are different when different parts of the brain are hit by fist. When the frontal area is hit, the risk of skull fracture is significantly higher than when the temporal area is hit. The risk of brain tissue injury is the opposite. The position with the highest probability of skull fracture is generally the place where the skull is directly impacted, and with the conduction of stress waves, it will spread to other parts of the skull, while the position with the highest risk of brain tissue injury is not the place where the brain is directly impacted.
Subject(s)
Humans , Biomechanical Phenomena , Craniocerebral Trauma/etiology , Finite Element Analysis , Head , Skull , Skull Fractures/etiology摘要
Objective To study the mechanism of rib fracture caused by landing on different parts of the trunk using finite element method, and to provide some new techniques and new ideas for the reconstruction of the whole process of falls from height. Methods The finite element method was used to study the rib fracture of human security model THUMS4.0 caused by landing on different parts of the trunk. Then the model was compared with actual cases and the mechanism of rib fracture caused by falls from height was analyzed from a biomechanical point of view. Results There were some differences in the stress and strain distribution as well as the rib fracture sites when different parts touched the ground. Ribs on both sides of the body were fractured when the front of the trunk touched the ground, and the fractures were mainly located in the junction of the ribs and costal cartilage and the midaxillary line area. When the right anterior part of the trunk touched the ground, rib fracture occurred first on the side that touched the ground, and rib fractures were mainly located in the area from the right midaxillary line to the posterior axillary line, and junction of ribs on both sides and costal cartilage. When the back of the trunk touched the ground, the fracture sites were mainly located on the back of the ribs on both sides. When the right posterior part of the trunk touched the ground, multiple rib fractures were likely to occur in the parts that touched the ground. The plastic strains were mainly concentrated at the fracture sites, while the von Mises stresses were not only concentrated at the fracture sites, but also at other sites. Conclusion There are some differences in rib fracture location sites and injury mechanisms when different parts of the trunk touch the ground.
Subject(s)
Humans , Accidental Falls , Biomechanical Phenomena , Finite Element Analysis , Rib Fractures/etiology , Ribs , Torso摘要
Objective To assess the accuracy and reliability of the two 3D measuring methods, structured-light scanning and single-camera photogrammetry in forensic body surface damage and scar measurement. Methods The measuring results of 86 injuries by the ruler method, structured-light scanning and single-camera photogrammetry were compared and evaluated. The area measuring results of 13 simulated scars by the structured-light scanning, single-camera photogrammetry, Photoshop lasso pixel method and PDF reading software were compared and evaluated. The time consumed was recorded. The known specification information of the stickers was used as the standard value to compare the measuring accuracy of the ruler method, structural-light scanning and single-camera photogrammetry, and to calculate the root mean square error (RMSE). The consistency evaluation of intraclass correlation coefficient (ICC) for the repeatability of 3 measuring results obtained by different operators and the same operator. Results The differences in results of the two 3D measuring methods and the ruler method had no statistical significance; the differences between measuring results made by the structured-light scanning, single-camera photogrammetry and PDF reading software and that of the Photoshop lasso pixel method had no statistical significance. The post-processing of the single-camera photogrammetry consumed more time than that of other methods. When the long-distance group (10-40 cm) was measured, the results obtained by the ruler method were shorter than the standard value. The RMSE value results were structured-light scanning < single-camera photogrammetry < ruler method. The ICC value intragroup and intergroup were greater than 0.99. Conclusion Both structured-light scanning and single-camera photogrammetry can be applied in recording and measuring forensic body surface damage. The former has better performance in measurement accuracy and stability, while the latter has better color performance but longer post-processing time.
Subject(s)
Humans , Cicatrix , Imaging, Three-Dimensional , Photogrammetry , Reproducibility of Results , Software摘要
Objective To evaluate the influence of factors such as the selection of equipment, focal length and the selection of reconstruction quality in the reconstruction software on the reconstruction results of single camera photogrammetry and provide reference for the forensic application of single camera photogrammetry. Methods The 19 skulls were measured by traditional measurement method and single camera photogrammetry. The differences between the two measurement methods and within the group with same equipment but different focal length were analyzed. One skull and one corpse were selected as the research objects. According to the reconstruction quality selection conditions in the photogrammetric software, the experimental group was divided into five grades. The model reconstructed by optical scanner was defined as reference model, while the model reconstructed by single camera photogrammetry was defined as test model. The test model was aligned with the reference model, 3D deviation analysis was carried out and the mean error and root mean square (RMS) values were calculated. Results The differences between EOS 7D zoom group and traditional measurement, and within the group with same equipment had statistical significance (P<0.05). The mean error value and minimum RMS value of the skull reconstructed by single camera photogrammetry and the three-dimensional model of the corpse existed in the medium quality group, and the trend was basically the same. Conclusion The equipment and focal length has no obvious influence on the results of single camera photogrammetry. Lower reconstruction quality can easily cause distortion, while higher reconstruction quality can easily generate noise, so medium quality is preferred.
Subject(s)
Forensic Medicine , Imaging, Three-Dimensional , Photogrammetry , Skull/diagnostic imaging , Software摘要
Virtual autopsy is a new technique for investigating the morphological changes of cadaveric tissues and organs by medical imaging technology. It has been widely used in the identification of causes of death. Multislice spiral computed tomography (MSCT) has become a routine inspection method in some identification institutions, although it cannot completely replace traditional autopsy, it plays a key auxiliary or substitute role in the identification of certain abnormal causes of death. Plain MSCT scan cannot visualize cadaveric vessels, but can perform cadaveric angiography to determine vascular injury or disease. This technology has entered a rapid development period in recent years, and has made a considerable progress in contrast agent, perfusion methods and imaging methods. This article summarizes several common cadaveric MSCT angiography methods, such as systemic angiography, angiography through cardiopulmonary resuscitation, targeted angiography, and angiography by cardiac puncture, and analyzes and compares the application prospects.
Subject(s)
Humans , Angiography , Autopsy , Coronary Angiography , Heart , Tomography, Spiral Computed摘要
Postmortem changes on corpses appear immediately after death, and can transform the original structure characteristics of the corpse to different degrees as well as show specific changes on computed tomography (CT) images, sometimes with false positives and false negatives, influencing the identification of injuries or diseases. This paper systematically summarizes the postmortem changes of computed tomography imaging characteristics on corpses, to further expand the application of virtopsy in the practices of forensic pathology identification, and provide reference for the identification of injuries, diseases and changes after normal death.
Subject(s)
Humans , Autopsy , Cadaver , Forensic Pathology/instrumentation , Postmortem Changes , Research/trends , Tomography, X-Ray Computed摘要
Congenital heart disease is one of the main types of birth defect.The mammalian heart developmen-tal progress requires precise gene patterning in time and space.In addition to the gene sequence,recent research showed that the regulation of core cardiac gene expression has been proved to be closely related to cardiac transcription factors as well as the modification of genomic architecture of the histone.Methylation of histone might be the key nodes in the regula-tion of cardiac gene expression and chromatin structure.This review focuses on the role of histone H 3 methylation in heart development process,which may lay a foundation for the prediction of epigenetic modification of congenital heart disease.
摘要
Objective To reconstruct a vehicle-bicycle-cyclist crash accident and analyse the injuries us-ing 3D laser scanning technology, multi-rigid-body dynamics and optimized genetic algorithm, and to provide biomechanical basis for the forensic identification of death cause. Methods The vehicle was measured by 3D laser scanning technology. The multi-rigid-body models of cyclist, bicycle and vehicle were developed based on the measurements. The value range of optimal variables was set. A multi-ob-jective genetic algorithm and the nondominated sorting genetic algorithm were used to find the optimal solutions, which were compared to the record of the surveillance video around the accident scene. Re-sults The reconstruction result of laser scanning on vehicle was satisfactory. In the optimal solutions found by optimization method of genetic algorithm, the dynamical behaviours of dummy, bicycle and ve-hicle corresponded to that recorded by the surveillance video. The injury parameters of dummy were consistent with the situation and position of the real injuries on the cyclist in accident. Conclusion The motion status before accident, damage process by crash and mechanical analysis on the injury of the victim can be reconstructed using 3D laser scanning technology, multi-rigid-body dynamics and opti-mized genetic algorithm, which have application value in the identification of injury manner and analysis of death cause in traffic accidents.
摘要
OBJECTIVES@#To explore the application value of postmortem computed tomography (CT) angiography on diagnosis of coronary atherosclerotic stenosis degree.@*METHODS@#Based on the previous experimental results, the postmortem CT angiography device of human isolated heart was improved. Different coronary atherosclerotic stenosis degree of sudden death cases was selected. Before the cardiac anatomy, hearts were removed out completely and CT angiography was performed immediately. The CT angiography results were compared with histopathological findings. Meanwhile, the advantages and disadvantages of the angiography device before and after improvement were compared.@*RESULTS@#The improved angiography device of isolated heart could get better imaging results. The postmortem CT angiography results had high consistency with the histopathological findings on diagnosis of coronary atherosclerotic stenosis degree. And the coronary artery lesions could be revealed more objectively and vividly by 3D reconstruction technology. However, CT angiography could only be used to examine the pathological changes of blood vessels, which might have some limitations on the diagnosis of cause of death.@*CONCLUSIONS@#Postmortem CT angiography can be used as an additional method for the conventional autopsy in the cases of coronary atherosclerosis.
Subject(s)
Humans , Middle Aged , Autopsy , Computed Tomography Angiography/methods , Coronary Angiography , Coronary Artery Disease/diagnostic imaging , Coronary Stenosis , Heart , Predictive Value of Tests , Tomography, X-Ray Computed摘要
OBJECTIVE@#To establish a diagnostic model for diffuse axonal injury (DAI) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). To screen the proteins or peptides associated with DAI for providing the biomarkers with theoretic foundation.@*METHODS@#Fifteen male Sprague-Dawley rats were randomly divided into DAI group (n = 10) and control group (n = 5). The protein or peptide expression profiles of rat brain stem were detected by MALDI-TOF-MS. ClinProTools 2.2 software was used to find specific peaks, and a diagnostic model was established by the genetic algorithm.@*RESULTS@#There were significant differences in 61 peaks of DAI group (P < 0.05), 9 peaks were down-regulated and 52 up-regulated. The diagnostic model was established based on 5 different peaks. The specificity and sensitivity of cross validation was 96.14% and 95.98%; while the specificity and sensitivity of blind validation showed was 73.33% and 70.00%, respectively.@*CONCLUSION@#A specific and sensitive diagnostic model of DAI can be established by MALDI-TOF-MS to provide a potential value for determining DAI in forensic practice.
Subject(s)
Animals , Male , Rats , Biomarkers , Brain Stem/metabolism , Diffuse Axonal Injury/diagnosis , Down-Regulation , Peptides/blood , Proteomics , Rats, Sprague-Dawley , Sensitivity and Specificity , Software , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization/methods , Up-Regulation摘要
Matrix-assisted laser desorption/ionization time-of-flight imaging mass spectrometry (MALDI-TOF-IMS) has been a classical technique for studying proteomics in present and a tool for analyzing the distribution of proteins and small molecules within biological tissue sections. MALDI-TOF-IMS can analyze multiple unknown compounds in biological tissue sections simultaneously through a single measurement which can obtain molecule imaging of the tissue while maintaining the integrity of cellular and molecules in tissue. In recent years, imaging mass spectrometry technique develops relatively quickly in all biomedical domain. This paper based on the relevant data and reviews the present developing level of MALDI-TOF-IMS, the principle of imaging mass spectrometry, methology and the prospect in forensic pathology.
Subject(s)
Humans , Male , Diagnostic Imaging , Forensic Sciences/methods , Proteins , Proteomics , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization摘要
In the researches of biomechanics for child craniocerebral injury, the research progress of performance parameter detection for brain, skull, cranial suture and dura mater, and the finite element model construction for child's head were reviewed. Meanwhile, the shortcomings of the established finite element model construction of child's head were analyzed. Thus, it is necessary to strengthen the material properties parameter detection of child's head, and establish the relevant database, so as to lay the foundation for establishing an accurate finite element model of child's head.
Subject(s)
Child , Humans , Biomechanical Phenomena , Brain/pathology , Craniocerebral Trauma/physiopathology , Finite Element Analysis , Head/pathology , Skull/pathology摘要
OBJECTIVE@#To explore the application value of multi-slice spiral computed tomography (MSCT) in traffic accidents through observing and analyzing the injury features of the accidents.@*METHODS@#Two fatal cases caused by traffic accidents were fully examined using MSCT, 3D imaging reconstruction and angiography through cardiac puncture. The features of traffic injury mechanism were analyzed through combination of MSCT and postmortem external examination.@*RESULTS@#In case 1, right cardiac rupture was found by MSCT and angiography through cardiac puncture. The cause of death was cardiac tamponade and right ventricular rupture due to the crush injury of chest in the traffic accident. In case 2, splenic rupture and intra-abdominal hemorrhage was found and caused by injury of left trunk by MSCT. The cause of death was hemorrhage and traumatic shock.@*CONCLUSION@#MSCT could observe skeletal injury, soft tissue injury, and hematologic disorder well. The combination use of MSCT and angiography through cardiac puncture provided assistance to the diagnosis of cardiovascular system injury.
Subject(s)
Humans , Accidents, Traffic/mortality , Autopsy , Fatal Outcome , Hemorrhage , Imaging, Three-Dimensional/methods , Multidetector Computed Tomography/methods , Soft Tissue Injuries , Wounds and Injuries/pathology摘要
Finite element method (FEM) is an effective mathematical method for stress analysis, and has been gradually applied in the study of biomechanics of human body structures. This paper reviews the construction, development, materials assignment and verification of FEM model of cervical vertebra, and it also states the research results of injury mechanism of whiplash injury and biomechanical response analysis of the cervical vertebra using FEM by researchers at home and abroad.
Subject(s)
Adult , Humans , Male , Biomechanical Phenomena , Cervical Vertebrae/physiopathology , Finite Element Analysis , Intervertebral Disc/physiopathology , Models, Anatomic , Soft Tissue Injuries/physiopathology , Stress, Mechanical , Whiplash Injuries/physiopathology摘要
OBJECTIVE@#To observe the time-course expression of zonula occludens-1 (ZO-1) in cerebral cortex after traumatic brain injury (TBI).@*METHODS@#The TBI model of mouse was established. The mice were divided in 1 h, 3 h, 6 h, 12 h, 24 h, 3 d, 7 d after TBI, sham and control groups. The permeability of the blood brain barrier was evaluated by measuring the extravasation of Evans blue (EB) dye. The expression of ZO-1 in cerebral cortex in the injured area was detected by Western blotting and immunohistochemistry.@*RESULTS@#The extravasation of EB dye of injured cortex gradually increased from 1 h, peaked at 1-3 d and approximately decreased to normal at 7 d after TBI. Western blotting revealed that the expression of ZO-1 gradually decreased after 1 h, was at the lowest at 1-3 d, and then significantly increased after 7 d but was still lower than that of normal and sham groups. The result of immunohistochemistry showed that ZO-1 had strong expression in vessel of normal cortex, gradually decreased after TBI, and almost disappeared at 3 d after TBI and gradually recovered to normal level later.@*CONCLUSION@#The expression of ZO-1 in the injured cortex after TBI initially decreases and then increases. The negative correlation between ZO-1 expression and EB extravasation after TBI could be used as a new indicator for wound age estimation.
Subject(s)
Animals , Mice , Blood-Brain Barrier , Blotting, Western , Brain Injuries/physiopathology , Cerebral Cortex/metabolism , Immunohistochemistry , Permeability , Tight Junctions/metabolism , Zonula Occludens-1 Protein/metabolism摘要
OBJECTIVE@#To analyze the cases of anaphylactic death cases and explore the standards of judicial expertise of anaphylactic death for providing evidence for judicial expertise.@*METHODS@#Fifty-nine cases death due to allergic reaction in Shanghai were collected. And details of medical history, clinical manifestation of anaphylactic reaction and postmortem examination findings were reviewed for all cases.@*RESULTS@#In the 59 cases, there were 58 cases died from drug allergy, including 77.6% of them were antibiotics. The rates of treating in standard hospital and illegal clinic were 37.3% and 61.0%, respectively. The allergic symptoms were dyspnea and facial cyanosis. The time from contacting allergens to death ranged from 1 min to 3 d. The concentration of total serum IgE ranged from 50 to 576.92 IU/mL. The results of clinical manifestation and pathological anatomy had obviously changes.@*CONCLUSION@#Based on the exclusion of all other cause of death and synthetically analysis of details of cases, medical history, clinical manifestation and anatomy, the conclusion of anaphylactic death can reached. The details of cases including clinical history, exposure to allergens, and clinical manifestation play an important role in diagnosis of anaphylactic death.
Subject(s)
Humans , Anaphylaxis/mortality , Anti-Bacterial Agents/adverse effects , Autopsy , China , Drug Hypersensitivity/mortality , Forensic Sciences摘要
Postmortem chemistry is becoming more and more essential in routine forensic pathology and has made considerable progress over the past years. Biochemical analyses of vitreous humor, blood, urine and cerebrospinal fluid may provide important information in determining the cause of death or in elucidating forensic issues. Postmortem chemistry may be essential for the determination of cause of death when morphological methods (diabetes mellitus, alcoholic ketoacidosis and electrolytic disorders) cannot detect the pathophysiological changes involved in the death process. It can also provide many information in other forensic situations, including myocardial ischemia, sepsis, inflammation, infection, anaphylaxis and hormonal disturbances. The most recent relevant research advances on glucose metabolism, liver function, cardiac function, renal function, sepsis, inflammation, infection, anaphylaxis and hormonal aspect are hereby reviewed.