摘要
Objective:To investigate the protective effect of fibroblast growth factor 10 (FGF10) on neuronal injury and its potential molecular mechanism.Methods:Cortical neurons were dissected from brain tissues of newborn SD rats and seeded on Poly-L-Lysine coated plates. These neurons were then divided into control group, myelin group and myelin+FGF10 group; after 4 h of culture, neurons in the myelin group were added with a certain content of myelin solution (final concentration: 10 μg/mL), while neurons in the myelin+FGF10 group were added with myelin and FGF10 solution (final concentration: 4.3 nmol/L). One week after culturing, the neuronal apoptosis was detected by TUNEL and flow cytometry; neuronal survival was evaluated by live/dead assay and CCK-8 assay; expressions of apoptosis-related proteins, microtubule related proteins and RAS homologous gene family member A (Rho A)/Rho a-related protein kinase (ROCK) signaling pathway related proteins were detected by Western blotting and immunofluorescent double-label staining.Results:Compared with the control group, the myelin group had significantly increased neuronal apoptosis rate by TUNEL, early neuronal apoptosis rate by flow cytometry, activated cysteine proteinase-3 (caspase-3) protein expression and neuronal mortality rate by live/dead assay, and significantly decreased Bcl-2/Bax value, neuronal survival rate by CCK-8 method, value of acetylated tubulin/Tyr-tubulin (Ace/Tyr-tubulin), Tau protein expression and Ace/Tyr-tubulin fluorescent intensity ratio, and statistically increased Rho A and ROCK protein expressions and Rho A fluorescent intensity ( P<0.05). Compared with the myelin group, the myelin+FGF10 group had significantly decreased neuronal apoptosis rate by TUNEL, early neuronal apoptosis rate by flow cytometry and activated caspase-3 protein expression, significantly increased Bcl-2/Bax value, neuronal survival rate by CCK-8 method, Ace/Tyr-tubulin value, Tau protein expression and Ace/Tyr-tubulin fluorescent intensity ratio, and statistically decreased Rho A and ROCK protein expressions and Rho A fluorescent intensity ( P<0.05). Conclusion:FGF10 maintains microtubule stability in neurons likely through inhibiting Rho A/ROCK axis to antagonize myelin-induced apoptosis and improve the neuronal survival.
摘要
Abstract The aim of this study was to evaluate the effect of using a higher rotation speed with the XP-endo Shaper (XPS) on apically extruded debris and operation time during endodontic treatment and retreatment procedures. Sixty mesial roots of mandibular first molar teeth were randomly assigned to four groups (Initial treatment groups: XPS used at 1000 or 3000rpm rotation speeds and Retreatment groups: XPS used at 1000 or 3000rpm rotation speeds). During the initial treatment and retreatment procedures preweighed eppendorf tubes were used to collect apically extruded debris, and the operation time was recorded in seconds. The extruded debris was quantified by subtracting the preinstrumentation from the postinstrumentation weight of the Eppendorf tubes. Data were analysed using two-way ANOVA at a significance level of 0.05. In all groups, the use of the XPS at 1000 or 3000rpm rotation speeds had no statistically significant effect on the amount of apically extruded debris (p>0.05). The use of the XPS at a 3000rpm rotation speed significantly decreased the instrumentation time (p<0.05). In summary, the use of the XPS at high rotation speeds in initial treatment and retreatment procedures did not have a significant effect on the amount of apically extruded debris but significantly decreased the operation time.
Resumen El objetivo de este estudio fue evaluar el efecto del uso de una mayor velocidad de rotación con XP-endo Shaper (XPS) sobre los desechos extruidos apicalmente y el tiempo de operación durante el tratamiento endodóntico y los procedimientos de retratamiento. Sesenta raíces mesiales de los primeros molares mandibulares se asignaron aleatoriamente a cuatro grupos (grupos de tratamiento inicial: XPS usado a velocidades de rotación de 1000 o 3000rpm y grupos de retratamiento: XPS usado a velocidades de rotación de 1000 o 3000rpm). Durante el tratamiento inicial y los procedimientos de retratamiento se utilizaron tubos Eppendorf pesados previamente para recoger los desechos extruidos apicalmente, y el tiempo de operación se registró en segundos. Los residuos extruidos se cuantificaron restando la preinstrumentación del peso postinstrumentación de los tubos Eppendorf. Los datos se analizaron mediante ANOVA bidireccional a un nivel de significación de 0,05. En todos los grupos, el uso del XPS a velocidades de rotación de 1000 o 3000rpm no tuvo un efecto estadísticamente significativo sobre la cantidad de detritos extruidos apicalmente (p>0.05). El uso del XPS a una velocidad de rotación de 3000rpm disminuyó significativamente el tiempo de instrumentación (p<0.05). En resumen, el uso del XPS a altas velocidades de rotación en los procedimientos de tratamiento inicial y retratamiento no tuvo un efecto significativo en la cantidad de detritos extruidos apicalmente, pero disminuyó significativamente el tiempo de operación.
Subject(s)
Humans , Dental Waste , Dentistry, Operative , Endodontics摘要
Aim: This study aimed to systematically review available literature of in vitro studies on apical extrusion of debris through rotary instrumentation in comparison to manual instrumentation in pediatric endodontics, and also to perform a comparison between various rotary instrumentation systems for assessment of debris extrusion. Materials and Methods: A comprehensive search was conducted on PubMed, Medline, Cochrane Library, Embase, Scopus, and Google Scholar without any language restriction and year of publication. A planned search strategy was made for PubMed and applied to other databases. After full-text reading, 7 articles were selected for quantitative synthesis. Modified CONSORT checklist of items for reporting in vitro studies of dental materials was used for quality assessment of included studies. Results: Root canal preparation with rotary instrumentation led to lesser apical debris extrusion than manual instrumentation. Self-adjusting file system was associated with the least debris extrusion among all included studies, followed by ProTaper Next, Kedo-S, ProTaper, K3, Mtwo, Revo-S, and Wave One. Conclusion: More apical debris extrusion was seen with manual instrumentation than rotary instrumentation. Furtrhermore, variance in debris extrusion was seen with different rotary file systems.
摘要
Objective: to evaluate the amount of apical debris extrusion during root canal preparation using continuous and reciprocating systems. Material and Methods: Forty lower incisors were selected and randomly divided into four groups (n=10) for root canal preparation. Two multifile systems with continuous rotation (iRace® and Mtwo®) and two reciprocating single-file systems (Reciproc® and WaveOne®) were used. In the iRace® group, the R1 (15/.06), R2 (25/.04) and R3 (30/.04) instruments were used. In the Mtwo® group, the 10/.04, 15/.05, 20/.06, and 25/.06 instruments were used. In the Reciproc® and WaveOne® groups, the R25 and 25/.04 instruments were used, respectively. Apical debris extrusion was determined by calculating the difference between the pre- and post-instrumentation weight of the Eppendorf tubes. Statistical analysis was performed using the analysis of variance (ANOVA) test with the Bonferroni correction (p<0.05). Results: The iRace® group demonstrated significantly more apical extrusion than the Reciproc® group (p<0.05). There was no statistically significant difference between the Mtwo®, Reciproc®, and WaveOne® groups (p>0.05). Conclusion: All of the evaluated systems produced apical debris extrusion. The iRace® system produced more apical debris extrusion than the Reciproc® system, and there was no difference observed in this regard between the Mtwo®, Reciproc®, and WaveOne® systems.
Objetivo: avaliar a quantidade de debris extruidos apicalmente durante o preparo do canal radicular usando sistemas de rotação contínua e reciprocante. Materiais e Métodos: Quarenta incisivos inferiores foram selecionados e randomicamente divididos em quatro grupos (n=10) para o preparo do canal radicular. Dois sistemas de limas múltiplas de rotação contínua (iRace® e Mtwo®) e dois sistemas de limas únicas reciprocantes (Reciproc® e WaveOne®) foram usados. No grupo iRace®, foram utilizados os instrumentos R1 (15/.06), R2 (25/.04) e R3 (30/.04). No grupo Mtwo®, foram utilizados os instrumentos 10/.04, 15/.05, 20/.06, 25/.06. Nos grupos Reciproc® e WaveOne®, foram utilizados os instrumentos R25 e 25.04, respectivamente. A extrusão apical de debris foi calculada pela diferença entre os pesos dos tubos Eppendorf antes e após a instrumentação. A análise estatística foi feita usando o teste de análise de variância (ANOVA) seguida do teste de Bonferroni (p<0,05). Resultados: O grupo iRace® demonstrou significativamente mais extrusão quando comparado ao Reciproc (p<0,05). Não houve diferença estatisticamente significativa entre os grupos Mtwo®, Reciproc®, e WaveOne® (p>0,05). Conclusão: Todos os sistemas avaliados produziram extrusão apical de debris. O Sistema iRace® produziu mais extrusão apical de debris do que o Sistema Reciproc® e não foi observada diferença entre os sistemas Mtwo®, Reciproc® e WaveOne®.
Subject(s)
Endodontics , Root Canal Therapy , Root Canal Preparation , Dental Instruments摘要
Habitat homogenization has been a major impact in stream ecosystems, and it is considered one of the main drivers of biotic homogenization as well, leading to the loss of water quality and fish diversity. In this study, we added artificial woody structures and leaf packs in physically impacted streams to test if the additions can improve habitat complexity and change the taxonomic and functional structure of fish communities. The experiment was done in eight streams impacted by siltation, deforestation, and habitat homogeneization, inserted in an agricultural landscape from the Upper Paraná River Basin, and lasted 112 days. The provision of artificial microhabitats increased instream habitat diversity by creating patches of organic matter deposits, changing flow, and providing substrate for grass colonization of the instream habitat. The experimental manipulation also changed fish species abundance. Nine species contributed to these changes, five decreased and four increased in abundance, indicating species responded differently to the experimental manipulation. However, overall species richness, diversity, and community functional traits remained unaltered. These results indicate that short-term habitat restoration on a local scale may not be enough to promote changes in fish community attributes of streams that are heavily impacted.(AU)
A homogeneização de habitats tem sido um importante impacto nos ecossistemas de riachos e também é considerada um dos principais fatores de homogeneização biótica, levando à perda da qualidade da água e da diversidade de peixes. Neste estudo, adicionamos estruturas artificiais de madeira e pacotes de folhas em riachos fisicamente impactados para testar se as adições podem aumentar a heterogeneidade do habitat e alterar a estrutura taxonômica e funcional das comunidades de peixes. O experimento foi realizado em oito riachos impactados por assoreamento, desmatamento e homogeneização de hábitat, inseridos em uma paisagem agrícola da bacia do Alto Paraná, com duração de 112 dias. O fornecimento de microhabitats artificiais aumentou a diversidade de hábitat criando manchas de depósitos de matéria orgânica, alterando o fluxo e fornecendo substrato para a colonização de grama no interior do canal. A manipulação experimental também alterou a abundância de espécies de peixes. Dentre as nove espécies que contribuíram para essas alterações, cinco diminuíram e quatro aumentaram em abundância, indicando que as espécies responderam diferentemente à manipulação experimental. No entanto, a riqueza geral de espécies, a diversidade e as características funcionais da comunidade permaneceram inalteradas. Esses resultados indicam que a restauração de habitat a curto prazo em escala local pode não ser suficiente para promover mudanças nos atributos da comunidade de córregos que são fortemente impactados.(AU)
Subject(s)
Animals , Ecosystem , Biodiversity , Fishes/growth & development , Rivers摘要
The aim of the study was to quantify and compare apical debris extrusion in two systems of continuous and reciprocating rotary instrumentation with, and without, the use of a patency file. An experimental study was carried out in 120 mesial roots of lower first molars, which were randomized in the following 4 groups: Group A. Reciproc (VDW) R25 without a patency file, Group B Mtwo (VDW) without a patency file, Group C Reciproc (VDW) R25 with a patency file and Group D Mtwo with a patency file. Groups A, B and C presented statistically significant differences in comparison to group D, Mtwo with the use of a patency file (p<0.008 to 95% reliability). In conclusion, the greater amount of debris extruded through the apex occurred in roots instrumented with the reciprocating rotary system; this difference was statistically significant in relation to teeth treated with the Mtwo continuous rotary system with the use of a patency file.
El objetivo del estudio fue cuantificar y comparar la extrusión de residuos apicales en dos sistemas de instrumentación endodónticos rotativos, continuo y recíproco, con y sin el uso de una lima de pasaje apical. Se realizó un estudio experimental en 120 raíces mesiales de primeros molares inferiores, que se aleatorizaron en los siguientes 4 grupos: Grupo A. Reciproc (VDW) R25 sin lima de pasaje apical, Grupo B Mtwo (VDW) sin lima de pasaje apical, Grupo C Reciproc (VDW) R25 con lima de pasaje apical y Grupo D Mtwo con lima de pasaje apical. Los grupos A, B y C presentaron diferencias estadísticamente significativas encomparación con el grupo D, Mtwo con el uso de una lima de pasaje apical (p<0.008 a 95% de confiabilidad). En conclusión, la mayor cantidad de residuos extruidos a través del ápice ocurrió en raíces preparadas con el sistema rotativo recíproco; Esta diferencia fue estadísticamente significativa en relación a los dientes tratados con el sistema rotativo continuo Mtwo con el uso de una lima de pasaje apical.
Subject(s)
Humans , Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Tooth Apex , Dental Instruments , Dental Pulp Cavity摘要
Background: The DCT is lined with simple cuboidal cells that are shorter than those of the proximal convolutedtubule (PCT). The lumen appears larger in DCT, the histological changes DCT in kidney after death have beenstudied in various land animals and sea marine animals but yet very few studies with same view which mayprovide keen and fruitful results for human distal convoluted tubule in kidney have been done. It will be helpfulfor estimation of time after death.Aim: To determine the time since death by histological changes in Distal convoluted tubule.Materials and Methods: 50 Human kidneys samples at different time intervals between 4hrs to 52.30 hr,temperature between17.3/22.3-31.3/450C, humidity between 11/36 to 75/95, were of different age and sex obtainedas and when available from cadavers with a known time of death where death had resulted from natural death,suffocation and trauma, dead individual health and not suffering from disease affecting kidney.Result: Increase the rate of postmortem histological changes in DCT was found to be increased with rise in thetemperature and duration. In Distal convoluted tubules lumens were found swelling of epithelial cells. Retractionof epithelium from the basement membrane and its disruption with individualization of cells, nuclear pyknosis,karyolysis and loss of tubular architecture with debris in the lumen were observed.Conclusion: In this current research, sequence of postmortem histological changes in DCT was studied. Thesecriteria’s presented in this study could be used to determine the time after death
摘要
Abstract The present study evaluated the amount of apically extruded debris after chemo-mechanical preparation (CMP) associated with passive ultrasonic irrigation (PUI) using four different root canal irrigants, namely, 6% sodium hypochlorite (NaOCl), 2% chlorhexidine gel + saline solution (2% CHXg+SS), 2% chlorhexidine solution (2% CHXs) and SS alone. Sixty mandibular premolars with single straight root canals were selected and randomly assigned into 4 groups (n=15) according to the root canal irrigant used as follows: G1 (PUI + NaOCl), G2 (PUI + CHXg+SS), G3 (PUI+CHXs) and G4 (PUI+SS). Reciproc® R25 files (25/.08) were used during CMP and the debris extruded from each tooth were collected in pre-weighted Eppendorf tubes and dried. The average weight of debris was assessed by using an analytical microbalance. Data were statistically analysed by using ANOVA and post-hoc Tukey's test (a=0.05). Debris extrusion was observed in all groups, irrespective of the root canal irrigating, with 2% CHXg + SS being associated with lower debris extrusion compared to other irrigants (p<0.05). No significant differences were observed between 6% NaOCl, 2% CHXs and SS. In conclusion, passive ultrasonic irrigation did not completely prevent apically extrusion of debris. PUI performed with 2% chlorhexidine gel + saline solution significantly minimized debris extrusion compared to 6% sodium hypochlorite, chlorhexidine solution and saline solution.
Resumo O presente estudo avaliou a quantidade de debris extruídos apicalmente após o preparo químico-mecânico (PQM) associado à irrigação ultrassônica passiva (IUP) em associação com quatro diferentes irrigantes - hipoclorito de sódio 6% (NaOCl), clorexidina gel 2% + solução salina (CLXg 2% + SS), solução de clorexidina 2% (CLXs 2%) e SS. Sessenta pré-molares inferiores com canais radiculares únicos e retos foram selecionados e aleatoriamente distribuídos em 4 grupos (n=15) de acordo com o irrigante utilizado: G1 (IUP + NaOCl), G2 (IUP + CLXg + SS), G3 (IUP + CLXs) e G4 (IUP + SS). Limas Reciproc® R25 (25/.08) foram utilizadas durante o PQM e os debris extruídos de cada dente foram coletados em tubos Eppendorf pré-pesados e secos. O peso médio de debris foi avaliado através de microbalança analítica, e os dados foram analisados estatisticamente utilizando ANOVA e teste de Tukey post hoc (a=0.05). Extrusão de debris foi observada em todos os grupos, independente do irrigante. CHXg 2% + SS foram associados a menor extrusão de debris comparado aos demais irrigantes (p<0.05). Não foram observadas diferenças estatisticamente significativas entre NaOCl 6%, CLXs 2% e SS. Concluindo, irrigação ultrassônica passiva não preveniu completamente a extrusão apical de debris, entretanto, IUP realizada com CLXg 2% + SS minimiza significativamente a extrusão de debris comparado ao NaOCl 6%, CLXs 2% e SS.
Subject(s)
Humans , Root Canal Irrigants , Root Canal Preparation , Ultrasonics , Tooth Apex , Dental Pulp Cavity , Therapeutic Irrigation摘要
Introdução: O objetivo deste estudo foi avaliar a eficácia de diferentes protocolos de Irrigação Ultrassônica Passiva (PUI) por meio de microscopia eletrônica de varredura (MEV). Métodos: Seis cavidades foram confeccionadas ao longo da seção vestibular de 20 canais radiculares de pré-molares inferiores humanos e preenchidas com detritos. 10 grupos foram criados de acordo com o protocolo final de irrigação: Grupo 1- controle positivo (sem detritos); Grupo 2- controle negativo (com detritos); Grupo 3 - irrigação convencional com hipoclorito de sódio a 2,5% (NaOCl); Grupo 4 - irrigação convencional com 17% de ácido etilenodiaminotetracético (EDTA) seguido de NaOCl; Grupo 5- PUI com 3 ciclos de 20 segundos (NaOCl-NaOCl-NaOCl); Grupo 6- PUI com 3 ciclos de 20 segundos (NaOCl-EDTA-NaOCl); Grupo 7- PUI com um ciclo de 60 segundos (NaOCl); Grupo 8 - PUI com ciclo de 180 segundos (NaOCl); Grupo 9 - PUI com 2 ciclos de 60 segundos (EDTA-NaOCl); Grupo 10 - PUI com 2 ciclos de 60 segundos (NaOCl-EDTA). Os espécimes foram observados em MEV para a análise da remoção dos detritos (scores 1 a 5) e exposição dos túbulos dentinários (score 1 ou 2) dentro das cavidades. O teste de Kruskal-Wallis foi realizado para a análise estatística, com significância de 5%. Resultados: Os grupos PUI apresentaram melhores resultados na limpeza de detritos do que os grupos de irrigação convencionais nas cavidades 1, 2 e 3. As cavidades 4, 5 e 6 foram limpas em todos os grupos experimentais. Em relação à exposição dos túbulos dentinários, os grupos PUI foram capazes de alcançar um resultado melhor do que os grupos de irrigação convencional. Conclusões: A PUI mostrou-se mais eficaz na remoção de detritos do que a irrigação convencional nas cavidades localizadas na região apical do canal radicular, e os grupos PUI promoveram maior exposição dos túbulos dentinários independentemente do uso de EDTA como agente quelante para tecidos inorgânicos(AU)
Introduction: The aim of this study was to evaluate the effectiveness of different Passive Ultrasonic Irrigation (PUI) protocols by means of scanning electron microscopy. Methods: Six hemispherical cavities were made along the buccal section of 20 root canals of human lower premolars and filled with debris. 10 groups was created according to the final irrigation protocol: Group 1- positive control (no debris); Group 2- negative control (with debris); Group 3- conventional irrigation with 2.5% sodium hypochlorite (NaOCl); Group 4- conventional irrigation with 17% ethylenediamine tetracetic acid (EDTA) followed by NaOCl; Group 5- PUI with 3 cycles of 20 seconds (NaOCl-NaOCl-NaOCl); Group 6- PUI with 3 cycles of 20 seconds (NaOCl-EDTANaOCl); Group 7- PUI with a 60 seconds cycle (NaOCl); Group 8- PUI with a 180 seconds cycle (NaOCl); Group 9- PUI with 2 cycles of 60 seconds (EDTA-NaOCl); Group 10- PUI with 2 cycles of 60 seconds (NaOCl-EDTA). Scores were given for the analysis of debris removal in SEM, as well as for the exposure of dentinal tubules within the cavities. Kruskal-Wallis test was performed for statistical analysis. Results: The PUI groups presented better results in cleaning of debris than the conventional irrigation groups in cavities 1, 2 and 3. Cavities 4, 5 and 6 were well cleansed in all experimental groups. Regarding the exposure of the dentinal tubules, the PUI groups were able to achieve a better result than the conventional irrigation groups. Conclusions: Passive ultrasonic irrigation proved to be more effective in the removal of debris than conventional irrigation in the cavities located in the apical region of the root canal, and the PUI groups promoted greater exposure of the dentinal tubules independently of the use of EDTA as a chelating agent for inorganic tissues(AU)
Subject(s)
Root Canal Irrigants , Root Canal Preparation , Sodium Hypochlorite , Ultrasonic Therapy , Acids , Bicuspid , Microscopy, Electron, Scanning , Edetic Acid摘要
La enfermedad aterosclerótica de la aorta constituye una de las causas cardiovasculares de embolia. La prevalencia de ésta patología constituye un indicador de peor pronóstico, en particular, en caso de debrís aórtico. El debrís aórtico está constituido por una placa ateromatosa complicada con un trombo móvil adherido. Presentamos el caso de un paciente de 58 años que presentó episodios reiterados de accidentes cerebrovasculares isquémicos.
Atherosclerotic disease of the aorta is one of the cardiovascular causes of embolism. The prevalence of this pathology is an indicator of worse prognosis, particularly in the case of aortic debris. The aortic debris is constituted by an atheromatous plaque complicated by a mobile thrombus attached. We present the case of a 58-year-old patient who presented repeated episodes of ischemic strokes.
Subject(s)
Stroke/diagnosis , Vascular Diseases摘要
Abstract This study evaluated the amount of apically extruded debris after chemo-mechanical preparation (CMP) using positive and negative pressure irrigation systems [Conventional irrigation (CI) and EndoVac (EV)] in association with different irrigants [6% Sodium Hypochlorite (NaOCl), 2% Chlorhexidine gel + saline solution (CHXg + SS), 2% Chlorhexidine solution (CHXs) or Saline solution (SS)]. Eighty mandibular premolars with single root canals were selected and randomly assigned into 8 groups (n = 10) according to the irrigation system and the irrigant used during CMP: G1 (EV + NaOCl), G2 (EV + CHXg + SS), G3 (EV + CHXs), G4 (EV + SS), G5 (CI + NaOCl), G6 (CI + CHXg + SS), G7 (CI + CHXs) and G8 (CI + SS). Reciproc® R25 files (25/.08) were used during the CMP and the extruded debris from each tooth was collected in pre-weighted Eppendorf tubes and dried. The average weight of debris was assessed using a microbalance, and the data were statistically analyzed using ANOVA and the post hoc Tukey's test (a = 0.05). All groups were associated with debris extrusion. EV was the irrigation system with less extruded debris (p < 0.05). No differences were observed regarding the irrigant when EV was used. When CI was used, CHXg + SS were associated with lower debris extrusion (p < 0.05). It was concluded that no irrigation protocol succeeded in preventing debris extrusion. EV resulted in lower levels of debris extrusion than CI. The use of CHXg + SS resulted in lower debris extrusion.
Resumo Este estudo avaliou a quantidade de debris extruídos apicalmente após o preparo químico-mecânico (PQM) utilizando sistemas de irrigação com pressão positiva e negativa [irrigação convencional (IC) e EndoVac (EV)] em associação com diferentes irrigantes [hipoclorito de sódio 6% (NaOCl), clorexidina gel + solução salina (CLXg + SS), solução de clorexidina 2% (CLXs) ou solução salina (SS)]. Oitenta pré-molares inferiores com único canal radicular foram selecionados e aleatoriamente alocados em 8 grupos (n=10) de acordo com o sistema de irrigação e irrigante utilizado durante o PQM: G1 (EV + NaOCl), G2 (EV + CLXg + SS), G3 (EV + CLXs), G4 (EV + SS), G5 (IC + NaOCl), G6 (IC + CLXg + SS), G7 (IC + CLXs) e G8 (IC + SS). Limas Reciproc® R25 foram utilizadas durante o PQM e os debris extruídos de cada dente foi coletado em tubos pré-pesados e secos. O peso médio de debris foi avaliado por meio de microbalança, e os dados foram analisados estatisticamente utilizando ANOVA e teste de Tukey (a = 0.05). Todos os grupos foram associados com extrusão de debris. EV foi o sistema de irrigação com menos debris extruídos (p<0.05). Não foram observadas diferenças entre os irrigantes quando o EV foi utilizado. Quando foi utilizada IC, CLXg + SS foram associados a menor extrusão de debris (p<0.05). Concluiu-se que nenhum protocolo de irrigação conseguiu prevenir extrusão de debris. EV resultou em menores níveis de extrusão de debris que a IC. A utilização da CLXg + SS resultou em menor extrusão de debris.
Subject(s)
Humans , Root Canal Irrigants/administration & dosage , Sodium Hypochlorite/administration & dosage , Chlorhexidine/administration & dosage , Root Canal Preparation/methods , Saline Solution/administration & dosage , Therapeutic Irrigation/methods , In Vitro Techniques , Random Allocation , Tooth Apex/metabolism摘要
Abstract The aim of this study was to assess the amount of apically extruded debris during filling removal with WaveOne Gold (WOG), ProTaper Universal Retreatment (PTR), D-RaCe Retreatment (DRR) or hand files (HF), to compare the working time during filling removal, and to describe failures of NiTi instruments. Forty mesiobuccal roots of maxillary first molars were prepared with WOG Primary, obturated and divided into 4 groups (n=10), according to the instruments used: WOG, PTR, DRR or HF. Distilled water was used as irrigant and the extruded debris were collected in Eppendorf tubes and dried. The amount of extruded debris was determined by subtracting the final from the initial weight. The time of filling removal for each canal was recorded and the instruments used were analyzed pre and post-operatively by SEM. Kruskal-Wallis and Dunn's test analyzed extruded debris data and ANOVA, followed by Tukey's test, compared the working time data (a=0.05). Instrument deformation and fracture were described. WOG produced significantly less debris compared with HF and DRR (p<0.05), and similar to PTR (p>0.05). HF, PTR and DRR showed no significant difference (p>0.05). Working time in HF group was significantly higher than others (p<0.05). SEM analyses showed, from the 18 instruments evaluated, 3 fractures and 10 deformations. All instruments tested caused debris extrusion. WOG was associated with less extrusion than DRR and HF. Filling removal with HF was slower than with the other instruments. All NiTi systems presented fracture and deformation.
Resumo O objetivo deste estudo foi avaliar a extrusão apical de debris durante a desobturação com WaveOne Gold (WOG), ProTaper Universal Retratamento (PTR), D-RaCe (DRR) ou limas manuais (HF), comparar o tempo de trabalho durante a desobturação, e descrever as falhas dos instrumentos de NiTi. Quarenta canais de raízes mésio-vestibulares de primeiros molars superiores foram preparados com WOG Primary, obturados e divididos em 4 grupos (n = 10), de acordo com os instrumentos a serem utilizados: WOG, PTR, DRR ou HF. Água destilada foi utilizada como irrigante, e os debris extruídos foram coletados em tubos Eppendorf e secos. A quantidade de debris extruídos foi determinada subtraindo-se o peso inicial do peso final. O tempo de cada desobturação foi anotado e os instrumentos utilizados foram analisados no pré e pós-operatório em MEV. Os testes Kruskal-Wallis e Dunn foram utilizados para analisar os dados da extrusão de debris, e os testes ANOVA e Tukey para comparar os dados do tempo de trabalho (a=0.05). As deformações e fraturas dos instrumentos foram descritas. O grupo WOG produziu significativamente menos debris quando comparado aos grupos HF e DRR (p<0.05), e foi similar ao grupo PTR (p>0.05). Os grupos HF, PTR e DRR não apresentaram diferença estatisticamente significante (p>0.05). O tempo de trabalho no grupo HF foi significativamente maior do que nos outros grupos (p<0.05). A análise em MEV mostrou que, dos 18 instrumentos avaliados, 3 fraturaram e em 10 foi observado deformação. Todos os sistemas testados causaram extrusão apical de debris. WOG foi associado com menor extrusão do que DRR e HF. A desobturação com HF foi mais lenta do que com os demais instrumentos. Todos os sistemas de NITI apresentaram fratura e deformação.
Subject(s)
Humans , Nickel/chemistry , Root Canal Preparation/instrumentation , Titanium/chemistry , Tooth Apex , Therapeutic Irrigation摘要
Objective To investigate the prevalence of primary teeth caries and oral hygiene status of preschool children in Kunming.Methods 6958 children aged 3-5 years from 30 kindergartens in Kunming were randomly selected for this study.The reserch of caries prevalence rate and soft dirt were investigated.Results The caries prevalence rate and the mean decayed,missing and filled teeth (XDMFT) values in primary teeth were 58.68%and 2.61 respectively.We can see the difference of significant between Dental caries prevalence and mean debris index simplified ( DI - S) scores between age groups, and there was no statistical significance of the same index between sex. There was no correlation between the investigation of dental caries and oral hygiene status. Conclusion The caries prevalence rate in 3-5 year-old children in the downtown area of Kunming city is very high,pointing out that preventive treatment against primary teeth caries should be strengthened.
摘要
Objective To evaluate the influence of the mean corpuscular volume (MCV) in different ranges on PLT counts,provide the theoretical basis for making PLT counts review rules in laboratory.Methods From March 2016 to August 2016 in Xijing Hospital department of outpatient who perform complete blood cell count were randomly divided into 3 groups,MCV≤65 fl in A group,65 fl<MCV≤70 fl in B group and 70 fl<MCV≤75 fl in C group.The reference method (Coulter principle) compared with the fluorescence method,accuracy analysis of different monitoring methods of counting PLT.Results PLT I and PLT F count values in A group was (322.8± 109.1) × 109/L and (282.60± 100.5) × 109/L respectively,and there was significant differences between the two groups (t=6.799,P<0.05).In B group,the count values was (305.7 ± 111.7)× 109/L and (304.8 ± 112.3)× 109/L respectively,and there was no differences between two groups.In C group,the count values was (292.2±84.4) × 109/L and (291.6±84.4) × 109/L respectively,and there was no differcnces between two groups neither.Conclusion When small red blood cells or blood cell debris present in blood circulation,MCV≤65 fl,the reference testing (Coulter principle)of platelets causes a false increase in platelet count.
摘要
Osteolysis is a primary reason causing aspetic loosening after total hip arthroplasty.But it still lacks of understand-ing of pathogenesis, special biomarkeres for diagnosis, drugs for prevention and clinical classification guiding treatment.This review aims to summarize the fundamental researches and the clinical diagnosis as well as the prevention and treatment of osteolysis based on our previous work and large quantities of references.
摘要
Metal wear debris,as the most common one,may cause aspetic loosening after total hip arthroplasty.It is gradual-ly recognized that wear of head-neck taper may produce metal wear debris after the decline of application of metal on metal prothesis. Wear of head neck taper is mainly relevant to material quality and taper connection at the head neck junction.So we wrote this review to analyze the mechanical and cellular mechanisms of wear of head -neck taper,and furthermore summarize the clinical diagnosis,pre-vention and treatment on adverse local tissue reactions based on large quantities of reference.
摘要
Objetivo: evaluar cuantitativamente la cantidad de residuos extruidos a través del foramen apical, comparando los sistemas Mtwo y Reciproc. Materiales y métodos: se usaron 20 premolares inferiores unirradiculares, con ápice maduro, curvaturas de 0 a 10 grados y oramen permeable a limas tipo K flexibles #10 y #15. Se realizó la cavidad de acceso de manera convencional con piedra redonda de diamante y fresa Endo Z. Se determinó visualmente la longitud de trabajo a 1 mm del foramen apical. Los dientes fueron divididos al azar en dos grupos de 10 especímenes cada uno. Grupo 1: instrumentación con sistema Mtwo (VDW GmbH) a la longitud de trabajo. Grupo 2: instrumentación con sistema Reciproc (VDW GmbH) con movimientos de picoteo por tercios. Se utilizó como irrigante 12,5 ml de agua destilada por elemento dentario. Para la recolección de restos, se usó la técnica de Myers y Montgomery. Los residuos y el irrigante extruidos fueron recolectados en un frasco vial prepesado. El peso de los restos fue calculado por la diferencia de las medidas pre- y posinstrumentación. Resultados: los datos fueron analizados estadísticamente con el test de normalidad de Kolmogorov-Smirnov. Posteriormente, los datos de dichas variables, dependientes pre- y po-, fueron analizados con la prueba T para muestras pareadas. No se registraron diferencias significativas entre ambos grupos (P>0,05). Conclusión: ambos sistemas rotatorios produjeron extrusión apical de residuos de manera similar.
Subject(s)
Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Dental High-Speed Equipment , In Vitro Techniques , Dental Instruments , Data Interpretation, Statistical , Tooth Apex/anatomy & histology摘要
Se presenta el número y peso por metro cuadrado de fragmentos de microplásticos presentes en cuatro playas arenosas de la costa peruana. Las muestras fueron colectadas entre junio de 2014 y mayo 2015. Fragmentos de plástico duro mayores a 1 mm fueron encontrados en más del 80% de las muestras de las cuatro playas. La playa Costa Azul (~ 12°S) presentó 522 fragmentos por metro cuadrado (items/m²) de microplásticos, de los cuales, 463.33 items/m² y 2.6 g/m² fueron plásticos duros. La playa Albúfera de Medio Mundo (~ 11°S) presentó el menor número y peso de microplásticos (4.67 items/m² y 0.50 g/m²). Una muestra aleatoria de la playa Costa Azul fue analizada por el espectroscopio FT-IR. Se encontró 5 fragmentos con poliuretano (PE), dos fragmentos con polipropileno (PP) y un fragmento con estireno (EPS). Pocos estudios mencionan al plástico duro como la mayor fracción de los microplásticos, se sugiere nuevas fuentes de intrusión y vías de microbasura en los hábitas, los cuales podrían estar afectando desde la base de trama trófica marina en el Perú.
Results of measurement of the microplastic number and weigh from four sandy beaches along Peruvian coast are shown. Microplastic samples were collected during June 2014 to May 2015. Hard plastic fragment > 1 mm was found at over 80% of the four sampling locations. The Costa Azul beach (~ 12°S) presented the 522 items per m² of microplastic, in which the 463.33 items per m² and weight 2.6 g per m² were hard plastic. The Medio Mundo (~ 11°S) beach has the lowest microplastic in number and weight (4.67 items per m² and 0.50 g per m²). The random microplastic sample from Costal Azul beach was confirmed by FT-IR spectroscopy, we found five fragments with polyurethane (PE), two pieces with polypropylene (PP) and one piece of Styrofoam (EPS). Few studies mention hard plastic with a main component of microplastic, and we suggest new insights into the sources and pathway of microdebris into habitats.
摘要
Objective:To study the changes of oral health indexes in adolescent orthodontic patients under different brushing time, and to provide basis for the orthodontists to give effective dental health promotion in clinic.Methods:A total of 123 adolescent orthodontic patients were included, and they were divided into 1-3min, 3-5 min, 5-7 min and 7-10 min groups based on the brushing time recorded in the period of orthodontic treatment.The relationship between different brushing time and oral health indexes was evaluated 1,3,and 6 months after experiment, such as sulcus bleeding index(SBI),plaque index(PLI), debris index-simplified(DI-S) and enamel demineralization index(EDI).Results:Compared with 1-3 min and 3-5 min groups, the SBI, PLI, and DI-S of the patients in 5-7 min group were significantly reduced(P0.05).Conclusion:Brushing teeth more than 5 min can improve the oral hygiene significantly and the best time is 5-7 min;the orthodontists should require the patients to brush teeth at least for 5 min.
摘要
OBJECTIVES: This study compared the amount of apically extruded bacteria during the glide-path preparation by using multi-file and single-file glide-path establishing nickel-titanium (NiTi) rotary systems. MATERIALS AND METHODS: Sixty mandibular first molar teeth were used to prepare the test apparatus. They were decoronated, blocked into glass vials, sterilized in ethylene oxide gas, infected with a pure culture of Enterococcus faecalis, randomly assigned to 5 experimental groups, and then prepared using manual stainless-steel files (group KF) and glide-path establishing NiTi rotary files (group PF with PathFiles, group GF with G-Files, group PG with ProGlider, and group OG with One G). At the end of canal preparation, 0.01 mL NaCl solution was taken from the experimental vials. The suspension was plated on brain heart infusion agar and colonies of bacteria were counted, and the results were given as number of colony-forming units (CFU). RESULTS: The manual instrumentation technique tested in group KF extruded the highest number of bacteria compared to the other 4 groups (p < 0.05). The 4 groups using rotary glide-path establishing instruments extruded similar amounts of bacteria. CONCLUSIONS: All glide-path establishment instrument systems tested caused a measurable apical extrusion of bacteria. The manual glide-path preparation showed the highest number of bacteria extruded compared to the other NiTi glide-path establishing instruments.