摘要
Uveitis, a complex ocular disorder with numerous etiologies, can result from infection, autoimmune, and various physicochemical and mechanical injury factors. The treatment of this disease is difficult, and failure to receive timely and effective treatment can often lead to blindness. With the deepening of people's understanding of uveitis and its related mechanisms, various new sustained-release drug delivery systems for uveitis have been studied. However, due to the existence of various anatomical and physiological barriers in the eye, there are multiple obstacles to the sustained release treatment of uveitis. In this paper, the main research results in this field in recent years are reviewed, and the innovations and limitations of various new sustained-release drug delivery systems are discussed in order to provide new ideas for the sustained-release drug delivery treatment of uveitis in the future. These new sustained-release drug delivery systems will help to completely change the traditional treatment mode of uveitis with side effects and poor compliance in the future, bringing longer targeted sustained release and less toxic reactions.
摘要
ObjectiveTo explore the clinical efficacy and safety of Fuzheng Huaji Longbi decoction in treating benign prostatic hyperplasia （BPH） in the patients with the syndrome of healthy Qi deficiency and blood stasis. MethodA total of 94 BPH patients were randomized into control and observation groups， with 47 patients in each group. The control group was treated with doxazosin mesylate sustained-release tablets， and the observation group with Fuzheng Huaji Longbi decoction on the basis of the therapy in the control group. After eight weeks， the international prostate symptom score （IPSS）， quality of life （QOL） score， residual urine volume （RUV）， maximum urinary flow rate （Qmax）， TCM syndrome score， TCM symptom score， electrocardiogram， and liver and kidney function were determined to evaluate the clinical efficacy and safety of the two groups. ResultAfter 8 weeks of treatment， the total response rate in the control group was 63.64% （28/44）， which was lower than that （84.44%， 38/45） in the observation group （χ2=5.026， P<0.05）. The clinical efficacy in the observation group was higher than that in the control group （Z=-2.17， P=0.030）. The treatment in both groups decreased the IPSS， QOL score， RUV， and TCM syndrome scores and increased the Qmax （P<0.05）. Moreover， the observation group had lower IPSS， QOL score， RUV， and TCM syndrome score （P<0.05） and higher Qmax than the control group after treatment （P<0.05）. The treatment in the observation group decreased all the TCM symptom scores （P<0.05）， while that in the control group only decreased the frequency of urination at night and the scores of dysuria， weak urine stream， and post-urinary drainage （P<0.05）. After treatment， the observation group had lower frequency of urination at night and lower scores of mental fatigue， cold limbs， lower abdominal discomfort， and loose stool than the control group （P<0.05）. No adverse events associated with the administration of Fuzheng Huaji Longbi decoction were observed during the treatment period. ConclusionFuzheng Huaji Longbi decoction is effective in treating BPH in the patients with the syndrome of healthy qi deficiency and blood stasis. It can relieve the clinical symptoms and improve the quality of life， being a safe and reliable choice for clinical application.
摘要
In this study, fluvoxamine maleate sustained-release pellet system tablets were prepared and were used to evaluate their release behaviors in vitro. Fluvoxamine maleate pellets were prepared using centrifugal-spherization method and coated by fluidized bed as bottom-spray. The multi-unit sustained-release pellets and appropriate excipients for prescription volumes were mixed uniformly and then compressed to tablets. Screening and determining the optimal formulation of drug loaded pellets through L8 (24) Taguchi experiment. Using Minitab software to design a DOE experiment with 24 partial factors, including material temperature, fan speed, atomization pressure, and spray rate to optimize the bottom spray coating process. Taking monostearate glycerol ester with a particle size of 24-40 mesh as the main diluent for tableting to relieve the delamination phenomenon between pellets and excipients during tablet pressing and reduce mechanical damage to the coating film. By examining the powder fluidity indexes such as angle of repose, bulk density, tapped density, and Hausner ratio of mixed particles, it was found that the flowability and compressibility are good and suitable for direct compression. Evaluate the basic properties of the sustained-release tablets, investigate the in vitro release behavior and study the release mechanism. The results of in vitro release test showed that the self-made sustained-release tablets could disintegrate into independent pellet units in phosphate buffer at pH 6.8 and release slowly within 24 h, which conformed to the first-order drug release model. The fluvoxamine maleate sustained-release pellet system tablets meet the requirements of preparation design and has a great commercial prospect.
摘要
BACKGROUND:Due to the sudden release and the rapid removal by proteases,platelet-rich plasma hydrogel leads to shorter residence times of growth factors at the wound site.In recent years,researchers have focused on the use of hydrogels to encapsulate platelet-rich plasma in order to improve the deficiency of platelet-rich plasma hydrogels. OBJECTIVE:To prepare self-assembled polypeptide-platelet-rich plasma hydrogel and to explore its effects on the release of bioactive factors of platelet-rich plasma. METHODS:The self-assembled polypeptide was synthesized by the solid-phase synthesis method,and the solution was prepared by D-PBS.Hydrogels were prepared by mixing different volumes of polypeptide solutions with platelet-rich plasma and calcium chloride/thrombin solutions,so that the final mass fraction of polypeptides in the system was 0.1%,0.3%,and 0.5%,respectively.The hydrogel state was observed,and the release of growth factors in platelet-rich plasma was detected in vitro.The polypeptide self-assembly was stimulated by mixing 1%polypeptide solution with 1%human serum albumin solution,so that the final mass fraction of the polypeptide was 0.1%,0.3%,and 0.5%,respectively.The flow state of the liquid was observed,and the rheological mechanical properties of the self-assembled polypeptide were tested.The microstructure of polypeptide(mass fraction of 0.1%and 0.001%)-human serum albumin solution was observed by scanning electron microscope and transmission electron microscope. RESULTS AND CONCLUSION:(1)Hydrogels could be formed between different volumes of polypeptide solution and platelet-rich plasma.Compared with platelet-rich plasma hydrogels,0.1%and 0.3%polypeptide-platelet-rich plasma hydrogels could alleviate the sudden release of epidermal growth factor and vascular endothelial growth factor,and extend the release time to 48 hours.(2)After the addition of human serum albumin,the 0.1%polypeptide group still exhibited a flowing liquid,the 0.3%polypeptide group was semi-liquid,and the 0.5%polypeptide group stimulated self-assembly to form hydrogel.It was determined that human serum albumin in platelet-rich plasma could stimulate the self-assembly of polypeptides.With the increase of the mass fraction of the polypeptide,the higher the storage modulus of the self-assembled polypeptide,the easier it was to form glue.(3)Transmission electron microscopy exhibited that the polypeptide nanofibers were short and disordered before the addition of human serum albumin.After the addition of human serum albumin,the polypeptide nanofibers became significantly longer and cross-linked into bundles,forming a dense fiber network structure.Under a scanning electron microscope,the polypeptides displayed a disordered lamellar structure before adding human serum albumin.After the addition of human serum albumin,the polypeptides self-assembled into cross-linked and densely arranged porous structures.(4)In conclusion,the novel polypeptide can self-assemble triggered by platelet-rich plasma and the self-assembly effect can be accurately adjusted according to the ratio of human serum albumin to polypeptide.This polypeptide has a sustained release effect on the growth factors of platelet-rich plasma,which can be used as a new biomaterial for tissue repair.
摘要
BACKGROUND:Polylactic acid has good biocompatibility and biodegradability,and has become a new orthopedic fixation material.However,the lack of cell recognition signal of this material is not conducive to cell adhesion and osteogenic differentiation,which limits its application in biomaterials. OBJECTIVE:3D-printed polylactic acid-nano-hydroxyapatite(nHA)/chitosan(CS)scaffold to evaluate its drug sustained-release and biological properties. METHODS:The porous polylactic acid scaffold(recorded as PLA scaffold)with interporous pores was printed by fused deposition modeling technique,and the scaffold was soaked in dopamine solution to prepare polylactic acid-dopamine scaffold(recorded as PLA-DA scaffold).Nano-hydroxyapatite was immersed in chitosan solution,and then the PLA-DA scaffold was immersed in it to prepare polylactic acid-nano-hydroxyapatite/chitosan scaffold(recorded as PLA-nHA/CS scaffold).The micro-morphology,porosity,water contact angle,and compressive strength of the three scaffolds were characterized.PLA-nHA/CS scaffold loaded with doxycycline(recorded as PLA-nHA/CS-DOX scaffold)was prepared by freeze-drying method,and its drug release was characterized.PLA,PLA-DA,PLA-nHA/CS,and PLA-nHA/CS-DOX scaffolds were co-cultured with MC3T3-E1 cells,separately,to detect cell proliferation and osteogenic differentiation.Staphylococcus aureus suspensions of different concentrations were co-cultured with four groups of scaffolds.The antibacterial performance of scaffolds was detected by inhibition zone test. RESULTS AND CONCLUSION:(1)Under scanning electron microscopy,the surfaces of PLA and PLA-DA scaffolders were dense and smooth,and nHA particles were observed on PLA-nHA/CS scaffolders.The porosity of PLA,PLA-DA and PLA-nHA/CS scaffolds decreased gradually,and the compressive strength increased gradually.The elastic modulus of PLA-nHA/CS scaffolds met the requirements of cancelous bone.The water contact angle of PLA-DA and PLA-nHA/CS brackets was smaller than that of PLA scaffolds.The PLA-nHA/CS scaffold sustainably released drugs in vitro for 8 days.(2)CCK-8 assay showed that the proliferation of MC3T3-E1 cells was not significantly affected by the four groups of scaffolds.The activity of alkaline phosphatase in PLA-DA group,PLA-nHA/CS group,and PLA-nHA/CS-DOX group was higher than that in PLA group.Alizarin red staining showed that compared with PLA group,the cells in PLA-nHA/CS group and PLA-nHA/CS-DOX group showed higher mineralized water level.(3)Inhibition zone test exhibited that PLA and PLA-DA scaffolds had no antibacterial properties.PLA-nHA/CS scaffolds had certain antibacterial properties.PLA-nHA/CS-DOX scaffolds had super antibacterial properties.(4)The results showed that the PLA-nHA/CS-DOX scaffold had good drug release performance,cell compatibility,osteogenic properties,and antibacterial properties.
摘要
BACKGROUND:In the treatment strategy of chronic osteomyelitis,the local antibiotic slow-release system has attracted much attention in the clinic due to the long-term release of effective concentrations of antibiotics to control the infection,and at the same time,the ability to repair bone defects caused by debridement. OBJECTIVE:To summarize the research status of antibiotic sustained-release carriers prepared from biodegradable polymer-based materials for the treatment of osteomyelitis,and analyze the limitations and challenges. METHODS:Chinese and English key words were"polymer,composite material,osteomyelitis,infectious bone defect,drug delivery systems,antibiotic sustained-release system,3D printing".Relevant articles were searched in PubMed,Web of Science,CNKI,and WanFang databases from January 2015 to August 2023.4 351 articles were obtained in the initial examination,and 87 articles were analyzed after screening. RESULTS AND CONCLUSION:Polymer-based materials have been widely studied in the preparation of antibiotic sustained-release carriers due to their good biocompatibility,biodegradability,thermal stability,and easy processing.However,the antibiotic slow-release carrier composed of a single polymer material cannot meet the standard of infectious bone defect repair materials due to the lack of biomechanical properties.The organic-inorganic composite material carrier,which simulates the formation of natural bone tissue structure,is expected to meet this standard.3D printing technology can precisely control the size,geometry,and spatial distribution of the interconnecting pores of the carrier,and can load the effective concentration of antibiotics to achieve controlled release.The polymer material is the most suitable for 3D printing because of its good thermal stability and plasticity.Therefore,the author believes that on the basis of new biodegradable organic-inorganic composite materials and combined with 3D printing technology,the material-structure-function integrated composite antibiotic slow-release carrier to simulate the extracellular matrix microenvironment is expected to become a novel research direction in the treatment of chronic osteomyelitis.
摘要
@#To evaluate bioequivalence and safety of two kinds of metformin hydrochloride sustained-release tablets (test preparation vs reference preparation) under the condition of fed and single administration.A single center, randomized, open, single-dose, two-period, two-sequence, and double-crossover design was used.32 healthy subjects took 0.5 g of test preparation or reference preparation under fed and single-dose administration.4 mL of venous blood was collected from before administration (0 h) to 1, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 12, 15, 24, 36 and 48 h after administration.The concentration of metformin in plasma samples was detected, and then the pharmacokinetic parameters were calculated by WinNonlin 7.0 software.When the 90% confidence intervals of cmax, AUC0-t and AUC0-∞ geometric mean ratio of test preparation and reference preparation were within 80.00%-125.00% equivalent intervals respectively, the bioequivalence of the two preparations was proved.One subject fell off due to adverse events.The main pharmacokinetic parameters of test preparation and reference preparation as follows: cmax were (0.68 ± 0.14) and (0.65 ± 0.11) mg/L, AUC0-t were (7.33 ± 1.65) and (7.00 ± 1.89) h·mg/L, AUC0-∞ were (7.39 ± 1.67) and (7.06 ± 1.91) h·mg/L, respectively.The 90% confidence intervals of the geometric mean ratio of the two main pharmacokinetic parameters were 101.45%-109.14%, 100.08%-112.32% and 100.24%-112.28%, respectively, which fell within the bioequivalence interval of 80.00%-125.00%.There were no serious adverse events and unexpected adverse events during the trial.The results show that test preparation and reference preparation are bioequivalent under fed and single-dose administration, safe and well tolerated in healthy subjects.
摘要
@#Chitosan-based microspheres use chitosan as the main material to obtain particles with special structures through microsphere processing technology. They have the ability of slow and controlled release of drugs and the role of scaffolding, which have great application prospect in stomatology, but the application of chitosan-based microspheres is still in the research stage and has not yet been applied in clinical practice. This article reviews progress of domestic and foreign research on chitosan-based microspheres, in aspects of treatment of oral and jawbone tissue defects, periodontal diseases, dental pulp diseases and nerve tissue injury, in order to provide reference for follow-up research.
摘要
Growth hormone deficiency (GHD) has become a serious healthcare burden, and presents a huge impact on the physical and mental health of patients. Here, we developed an actively separated microneedle patch (PAA/NaHCO3-Silk MN) based on silk protein for sustained release of recombinant human growth hormone (rhGH). Silk protein, as a friendly carrier material for proteins, could be constructed in mild full-water conditions and ensure the activity of rhGH. After manually pressing PAA/NaHCO3-Silk MN patch to skin for 1 min, active separation is achieved by absorbing the interstitial fluid (ISF) to trigger HCO3 ‒ in the active backing layer to produce carbon dioxide gas (CO2). In rats, the MN patch could maintain the sustained release of rhGH for more than 7 days, and produce similar effects as daily subcutaneous (S.C.) injections of rhGH in promoting height and weight with well tolerated. Moreover, the PAA/NaHCO3-Silk MN patch with the potential of painless self-administration, does not require cold chain transportation and storage possess great economic benefits. Overall, the PAA/NaHCO3-Silk MN patch can significantly improve patient compliance and increase the availability of drugs, meet current unmet clinical needs, improve clinical treatment effects of GHD patients.
摘要
Sirolimus self-microemulsion-mesoporous silicon sustained release tablets were prepared in order to improve the dissolution of the insoluble drug sirolimus and reduce its side effects. Firstly, sirolimus self-microemulsion was prepared and cured with mesoporous silicon. Secondly, the suitable excipients were selected according to the appearance, hardness and in vitro release rate. The sustained-release tablets with hydroxypropyl methylcellulose (HPMC) as skeleton material were prepared by powder direct pressing method, and the formulation was optimized by central composite design-response surface method to investigate the drug release in vitro. Finally, the pharmacokinetics was carried out in beagle dogs using the commercial sirolimus tablets as references. The final formulation of sustained-release tablets is as follows: 162 mg of sirolimus self-microemulsion-mesoporous silica (1∶1, w/w), 80 mg of HPMC K4M and 80 mg of carboxymethyl starch sodium, the microcrystalline cellulose is 168 mg. The results of in vitro release test showed that the self-made sustained-release tablets released slowly within 12 h, which conformed to the Ritger-Peppas model. The in vivo test results showed that compared with the commercial sirolimus tablets, the Cmax of the sustained-release tablets decreased by 49.47%, the Tmax of the sustained-release tablets was prolonged by 5.1 times, and the relative bioavailability was 105.81%. Sirolimus self-microemulsion-mesoporous silicon sustained-release tablets have good sustained-release effects in vitro and in vivo, which provides a reference for the solubilization of other insoluble drugs and the research and development of sustained-release preparations. Animal experiments and welfare processes were reviewed and approved by the Animal Ethics Committee of the 900TH Hospital of the Joint Logistics support Force.
摘要
@#Antimicrobial peptides have antibacterial effects on various pathogenic microorganisms, including natural antimicrobial peptides and synthetic antimicrobial peptides. According to the structure of natural antimicrobial peptides, synthetic antimicrobial peptides can be obtained by recombining different functional domains, adjusting the original amino acid sequence, or completely redesigning the peptides from scratch. Antimicrobial peptides can inhibit the growth of various cariogenic microorganisms and the formation of microbial biofilms. They also reduce acid production and acid resistance of microorganisms. Natural antimicrobial peptide genes can be used as genetic susceptibility markers for predicting the development of caries, thus, showing potential applications in the prevention and treatment of dental caries. The instability of natural antimicrobial peptides and the inability to achieve targeted sustained release limit their application in the prevention and treatment of oral caries. Synthetic antimicrobial peptides can enhance their stability and the antibacterial effect. Synthetic antimicrobial peptides can also be polymerized with common oral adhesives to reduce the incidence of microleakage after filling treatment for caries and to prevent the occurrence of secondary caries. The pH-sensitive antimicrobial peptides are slowly released to promote remineralization in the process of caries. However, the safety and biocompatibility of synthetic antimicrobial peptides are worse than those of natural antimicrobial peptides. Moreover, the combined effect of antibacterial peptides and anticaries drugs, such as fluoride, is still uncertain. Therefore, in this paper, we will review the design methods, application and underlying mechanisms of antimicrobial peptides to introduce novel methods and ideas for the prevention and treatment of dental caries.
摘要
Objectives:To observe the osteogenic properties and sustained release of 3D printed nano-hydroxyapatite(nHA)artificial bone loaded with a novel triple anti-tuberculosis drug combination(PaMZ)of Pretomanid(Pa),Moxifloxacin(M),Pyrazinamide(Z)and bone morphogenetic protein 2(BMP-2)in vivo.Methods:40 New Zealand rabbits were divided into four groups randomly and constructed spinal bone defect models.Group A(experimental group)implanted with 3D-printed PaMZ/BMP-2-loaded nHA artificial bone;group B(negative control group)implanted with blank nHA artificial bone;group C(positive control group)implanted with autologous iliac bone;group D(blank group)without bone grafting.The general conditions were observed,body temperature,weight,and liver and kidney function were monitored.The bone defect restoration was observed by spiral CT 3D reconstruction at the 4th,8th and 12th week postoperatively and was evaluated with CT-Hedberg scale;the gross observation of tissues and histopathological observation of the implants-bone defect interface were carried out at the 8th and 12th week postoperatively.100 SD rats were divided into two groups randomly,experimental group implanted with 3D-printed PaMZ/BMP-2-loaded nHA artificial bone,control group implanted with blank nHA artificial bone.The drug concentrations in the plasma and muscle tissue around the material at different time points was tested with high performance liquid chromatography.Results:All animal models were successfully constructed without incision infection or death.The body temperature,weight and liver and kidney function indexes of the experimental groups in the rabbit models were normal,with no statistical differences from those of the control groups(P＞0.05).The CT-Hedberg score showed that there was no statistical difference between group A and group C at the 4th,8th and 12th week(P＞0.05),however,there was statistical difference between all the other groups at different time points(P＜0.05).The observation of the gross specimens at the 12th week after surgery showed that the artificial bone in group A was completely encapsulated or replaced by new bone,but there was still some artificial bone exposed in group B.Quantitative analysis of the total trabecular area at the implant-bone defect interface showed no statistical difference between groups A and C at the 8th and 12th week postoperatively(P＞0.05),and a statistical difference between the remaining groups(P＜0.05).No drug components were detected in the SD rat model control group,the three drugs Pa,M,Z in experimental group can be sustained-released in local tissues for at least 84d.The blood drug concentration was not detected at the initial time point after local implantation of the drug-loaded artificial bone,and the subsequent measured results were much lower than the local tissue drug concentration,and the two had a positive correlation.Conclusions:The 3D printed PaMZ/BMP-2-loaded nHA artificial bone has good osteogenic properties in vivo,the effect of restoring spinal bone defects is comparable to that of autologous iliac bone,which is better than that of HA artificial bone scaffold alone.Its sustained release behavior in vivo is satisfactory,and the blood drug concentration is much lower than the local tissue drug concentration.
摘要
Objective:To prepare and preliminary verify dezocine polylactic acid-glycolic acid block copolymer (PLGA) microspheres.Methods:Preparation of dezocine PLGA microspheres Dezocine 120 mg, PLGA 0.1 g and the solubilizing additive poloxamer 0.1 g were dispersed in tetrahydrofuran solvent to form an organic phase solution. Sodium chloride and polyethylene glycol were dissolved in water for injection to form an inner aqueous phase solution and an outer aqueous phase solution. After the organic phase solution 20 ml was mixed with the inner aqueous phase solution 20 ml to form a water/oil colostrum, the water/oil colostrum was added to the outer aqueous phase solution to form a water/oil/water multiple emulsion, which was fully mixed with lyophilized powder protective agent and freeze-dried to prepare dezocine PLGA microspheres. Verification Eighteen clean-grade healthy male Sprague-Dawley rats, aged 10-12 weeks, weighing 220-260 g, were divided into 3 groups ( n=6 each) by a random number table method: control group (group C), dezocine ordinary preparation group (group D 1) and dezocine PLGA microspheres group (group D 2). Normal saline, dezocine injectio (dose 1 mg) and dezocine PLGA microsphere injectio (dose 0.2 μg) 0.2 ml were intramuscularly injected in C, D 1 and D 2 groups, respectively. The concentrations of dezocine in plasma were measured at 30 min and 1, 2, 3, 4, 5, 6, 7 and 8 h after administration, and thermal paw withdrawal latency was measured at T 1-T 3, T 5 and T 9. Tissues from the injection site were obtained on day 7 after intramuscular injection, and the inflammatory response was observed after HE staining. Results:Compared with group C, the thermal paw withdrawal latency was significantly prolonged at T 1-T 3 in group D 1 and at T 1-T 3, T 5 and T 9 in group D 2 ( P<0.05). Compared with group D 1, the thermal paw withdrawal latency was significantly prolonged at T 5 and T 9, and the plasma concentrations of dezocine were increased at T 6-T 9 in group D 2 ( P<0.05). Compared with the values at T 2, the plasma concentrations of dezocine were significantly decreased at T 4-T 9 in group D 1 ( P<0.05), and no significant change was found in the plasma concentrations of dezocine at T 3-T 9 in group D 2 ( P>0.05). On 7 days after injection, no inflammation was found in the local tissues in C, D 1 and D 2 groups, and no significant difference was found among the three groups. Conclusions:The sustained-release formulation of dezocine PLGA microspheres is successfully prepared, and it can maintain stable blood concentrations, effectively prolongs the action time of the drug and has significant sustained-release effect in rats.
摘要
Objective To establish a detection method for the determination of tetrodotoxin (TTX) in sustained-release microspheres. Methods The HPLC separation of tetrodotoxin was performed on an Agilent ZORBAX SB-C18 column (4.6mm×150mm,5 μm) with acetonitrile, 8mmol/L sodium heptane sulfonate containing 0.005% TFA (5:95) (pH 4.0) as the mobile phase. The flow rate was 1.0 ml/min. The UV detection wavelength was 200 nm and the column temperature was 30 °C. Results The method had good specificity and linearity of TTX in the concentration range of 1−20 μg/ml. The intra-day precision, inter-day precision, stability and repeatability of the method were good, and the average recoveries were found between 98.0% and 102.0%. Conclusion This study established an HPLC method which was suitable for the determination of tetrodotoxin sustained-release microspheres. The method is accurate and reliable within the applicable range, with strong specificity, which could lead to quantitative detection.
摘要
Despite growing prevalence and incidence, the management of gout remains suboptimal. The intermittent nature of the gout makes the long-term urate-lowering therapy (ULT) particularly important for gout management. However, patients are reluctant to take medication day after day to manage incurable occasional gout flares, and suffer from possible long-term toxicity. Therefore, a safe and easy-to-operate drug delivery system with simple preparation for the long-term management of gout is very necessary. Here, a chitosan-containing sustained-release microneedle system co-loaded with colchicine and uricase liposomes were fabricated to achieve this goal. This microneedle system was confirmed to successfully deliver the drug to the skin and maintain a one-week drug retention. Furthermore, its powerful therapeutic potency to manage gout was investigated in both acute gouty and chronic gouty models. Besides, the drug co-delivery system could help avoid long-term daily oral colchicine, a drug with a narrow therapeutic index. This system also avoids mass injection of uricase by improving its stability, enhancing the clinical application value of uricase. In general, this two-drug system reduces the dosage of uricase and colchicine and improves the patient's compliance, which has a strong clinical translation.
摘要
Global burden of chronic wounds has increased drasticallyas they are vulnerable to bacterial infections that causes inflammation, thereby leads to a delay in the healing process. Furthermore, wound care and dressing industry is subjected to a global market of $30.4 billion by 2024. Our work entails fabrication of polymeric electrospun nanofibers loaded with different concentration of the amoxicillin (AMX) antibiotic. Biodegradable and biocompatible poly (vinyl) alcohol (PVA)/poly(meth)(methacrylate)(PMMA) polymerswere blended with different AMX concentration (100, 150, 200 and 250 mg) and fabricated by electrospinning technique. Morphology, structural properties and drug release from electrospun nanofibers depend on the different concentrations of drug incorporated in PVA:PMMA blend of polymer. Furthermore, these studies revealed drug-excipient compatibility and drug encapsulation within the nanofiber. In-vitro release study showed the AMX release time from PVA: PMMA: AMX was extended up to 7 days for AMX-250 with an initial burst release of 70% and further sustained drug release. Electrospun nanofibers of PVA:PMMA:AMX showed greater zone of inhibition of S. aureus as 2.1±0.4 cm for 100-AMX, 2.3±0.5 cm for 150-AMX, 2.4±0.1 for 200-AMX and 3.4±0.3 cm for 250-AMX. These results demonstrate that AMX retains the anti-bacterial activity and hence can be used as a potential wound dressing candidate.
摘要
Objective To study the release profile of curcumin and piperine from the compound self-microemulsion. Methods The release of curcumin and piperine in vitro was investigated by dynamic dialysis under the condition of phosphate buffer of pH 4.8 and 7.5 with 0.75% Tween-80. Results The cumulative release rates of curcumin in pH 4.8 and pH 7.5 were 94.85% and 84.38% in 108 h, respectively. The cumulative release rates of piperine were 92.85% and 90.05% in 36 h, separately. Conclusion Curcumin and piperine in self-microemulsion have sustained release properties and released more in the acidic environment similar to the environment in tumors.
摘要
Objective:To investigate the efficacy of maintenance electroconvulsive therapy (MECT) combined with quetiapine treatment for manic episodes of bipolar disorder.Methods:A total of 103 patients with manic episodes of bipolar disorder received treatment in Kangci Hospital of Jiaxing from January 2019 to August 2020 and were included in this study. They were randomly divided into observation ( n = 46) and control groups ( n = 57). The observation group was given MECT combined with quetiapine treatment and the control group was treated with magnesium valproate sustained-release tablets combined with quetiapine. All patients received 4 weeks of treatment. Clinical efficacy, total hospital cost, drug cost during hospitalization, drug proportion, adverse reactions, and scores of the Bech-Rafaelsdn Mania Rating Scale and the Wisconsin Card Sorting Test pre- and post-treatment were compared between the two groups. Results:After 4 weeks of treatment, total response rate was significantly higher in the observation group than in the control group [76.09% (35/46) vs. 56.14% (32/57), χ2 = 4.45, P < 0.05]. In the observation group, total hospital cost, drug cost during hospitalization, and drug proportion were (16074.52 ± 1019.81) yuan, (1374.52 ± 619.81) yuan, and 8.70% respectively, which were not significantly different from those in the control group [(15618.14 ± 1550.34) yuan, (1261.14 ± 750.34) yuan, 10.53%, t = 1.71, 0.82, χ2 = 0.09, all P > 0.05]. After 4 weeks of treatment, Bech-Rafaelsdn Mania Rating score was significantly lower in the observation group than in the control group [(7.36 ± 3.04) points vs. (10.23 ± 2.37) points, t = 5.38, P < 0.001]. The number of wrong responses and the number of perseverative errors in the Wisconsin Card Sorting Test in the observation group were (40.45 ± 3.61) counts and (9.56 ± 1.39) counts, respectively, which were significantly lower than those in the control group [(48.59 ± 4.51) counts, (12.08 ± 1.25) counts, t = 10.17, 9.56, both P < 0.001]. The number of perseverative errors in the Wisconsin Card Sorting Test was significantly higher in the observation group than in the control group [(33.85 ± 2.50) counts vs. (29.71 ± 2.14) counts, t = 8.90, P < 0.001]. There was no significant difference in total incidence of adverse reactions between observation and control groups (21.74% vs. 22.81%, χ2 = 0.01, P > 0.05). Conclusion:MECT combined with quetiapine treatment is highly effective on the manic episodes of bipolar disorder. The combined therapy is worthy of clinical application.
摘要
OBJECTIVE To prepare cinnamaldehyde （CA） loaded liposomes bilayer-modified by bovine serum albumin （BSA）/chitosan （CTS）（BSA/CTS-Lip-CA） in order to improve the sustained-release effect and storage stability of the nanoparticles. METHODS Firstly，cinnamaldehyde loaded liposomes （Lip-CA）and blank liposomes （Lip-Blank）were prepared by thin film dispersion method. Then chitosan modified cinnamaldehyde loaded liposome （CTS-Lip-CA）and BSA/CTS-Lip-CA were obtained by electrostatic adsorption. Finally ， the prepared liposomes were characterized ， and their in vitro release characteristics and storage stability were investigated. RESULTS The particle size of BSA/CTS-Lip-CA was （177.8±4.0）nm and the Zeta potential was （－15.6±1.5）mV；they were in spherical shape ；FTIR analysis showed that the modification of BSA and CTS had no effect on the internal structure of liposomes. The results of in vitro drug release characteristics showed that the cumulative release of Lip-CA ，CTS-Lip-CA and BSA/CTS-Lip-CA within 10 hours were 82.9％，74.1％ and 72.9％ respectively. The results of storage stability showed that after 30 days of storage ，the particle sizes of Lip-CA ，CTS-Lip-CA and BSA/ CTS-Lip-CA were （134.2±2.1），（151.7±0.4），（164.8±1.5）nm；the retention rates of model drug CA were 65.4％，82.5％ and 90.2％ respectively. CONCLUSIONS BSA/CTS-Lip-CA is successfully prepared. It has a certain sustained-release effect and can improve the storage stability of the drug to a certain extent.
摘要
@#In this study, different functional layer formulations and process parameters were used to prepare the levomilnacipran hydrochloride sustained-release capsules, the influence of functional layer formulation and process factors on dose dumping was studied by comparing their release curves in 40% ethanol; and the risk of dose dumping of the self-developed drug was evaluated by the similar factors of the release curve of the self-developed drug and the reference drug.The results showed that as the coating weight increased, the degree of dose dumping decreased; when the concentration of ethanol in the coating liquid solvent was less than 80%, the dose dumping increased; as the atomization pressure and maturation time increase, the dose dumping became more serious. In 0% ethanol (purified water), 5% ethanol, 20% ethanol and 40% ethanol media, the self-developed and reference preparations had the same degree of dose dumping within the specified time, and rotation speed had no significant effect on the release of metformin in vitro. In summary, formulation factors such as coating weight gain, ethanol concentration in the coating solution solvent, and process factors such as atomization pressure and curing time have a serious impact on the dose dumping of sustained-release capsules.Under the optimal functional layer formulation and process, special attention should be paid to the control of risk of self-developed dose dumping.