Three fixation methods in the revision of medial defective intertrochanteric fractures with failed treatment: a finite element analysis / 中华骨科杂志
Chinese Journal of Orthopaedics
; (12): 308-315, 2023.
Article
ي Zh
| WPRIM
| ID: wpr-993443
المكتبة المسؤولة:
WPRO
ABSTRACT
Objective:
To compare the biomechanical differences of dynamic condylar screw (DCS), locking compression plate (LCP) combined with DCS and medial anatomic buttress plate (MABP) combined with DCS in the revision of medial defective intertrochanteric fractures by finite element analysis.Methods:
The femoral CT imaging data provided by a healthy adult volunteer were used to reconstruct the solid three-dimensional model of femur by Mimics 21.0 and Geomagics Studio 12. Evans-Jensen II B intertrochanteric fracture was established by Ansys Workbench18.0. The three-dimensional models of proximal femoral nail antirotation (PFNA), DCS, LCP and MABP were reconstructed in Solidworks 2015. The PFNA was assembled with the fracture model, and then the PFNA was removed to establish the postoperative failure model of femoral intertrochanteric fracture and then simulated the fixation in the hip-preserving revision surgery of femoral intertrochanteric fractures non-medial support reconstruction group (DCS); indirect medial support reconstruction group (DCS+LCP) and partial direct medial support reconstruction group (DCS+MABP). Finally, the forces on the hip joint of 70 kg normal people during standing (700 N), slow walking (1,400 N), brisk walking (1,750 N) and going up and down stairs (2,100 N) were simulated in Abaqus 6.14, the relative displacement and stress peak value of fracture end and stress distribution and stress peak value of internal fixation in different models were recorded.Results:
At 700 N axial load, the relative displacement of fracture end fixed by DCS, DCS+LCP and DCS+MABP was 0.28, 0.13 and 0.09 mm; the peak stress of the fracture end was 49.01, 15.29 and 1.35 MPa; the peak stress of internal fixation was 230, 220 and 174 MPa, respectively. At 1,400 N axial load, the relative displacement of the fracture end of the three internal fixation methods was 0.56, 0.24 and 0.16 mm; the peak stress of fracture end was 108.49, 28.96 and 3.12 MPa; the peak stress of internal fixation was 469, 352 and 324 MPa, respectively. At 1,750 N axial load, the relative displacement of the fracture end of the three group was 0.70, 0.30 and 0.20 mm; the peak stress of the fracture end was 139.59, 37.57 and 4.17 MPa; the peak stress of internal fixation was 594, 421 and 393 MPa, respectively. At 2,100 N axial load, the relative displacement of the fracture end of the three internal fixation methods was 0.85, 0.35 and 0.23 mm; the peak stress of the fracture end was 170.05, 46.36 and 5.24 MPa; the peak stress of internal fixation was 724, 504 and 460 MPa, respectively.Conclusion:
The partial direct reconstruction of medial support under the neck by DCS+MABP may have better biomechanical properties in the revision of medial defective intertrochanteric fractures.
النص الكامل:
1
الفهرس:
WPRIM
اللغة:
Zh
مجلة:
Chinese Journal of Orthopaedics
السنة:
2023
نوع:
Article