Five-Stage Approach for a Systematic Screening and Development of Etravirine Amorphous Solid Dispersions by Hot-Melt Extrusion.

The aim of this study was to develop a fast, effective, and material sparing screening method to design amorphous solid dispersions (ASDs) of etravirine to drive more effectively the development process, leading to improved bioavailability (BA) and stability. A systematic step-by-step approach was followed by combining theoretical calculations with high-throughput screening (HTS) and software-assisted multivariate statistical analysis. The thermodynamic miscibility and interaction of the drug in several polymers were predicted using Hansen solubility parameters (δ). The selected polymers were evaluated by HTS, using solvent evaporation. Binary compositions were evaluated by their solubilization capacity and physical stability over 2 months. JMP 14.0 was used for multivariate statistical analysis using principal components analysis. Extrusion was performed in Thermo Scientific HAAKE MiniLab II, and extrudates were characterized by assay, related substances, dissolution, and physical state (polarized light microscopy (PLM), Raman spectroscopy, and X-ray powder diffraction (XRPD)). A short stability study was performed where milled extrudates were exposed to 25 °C/60%RH and 40 °C/75%RH for 3 months. Through thermodynamic predictions, five main polymers were selected. The HTS enabled the evaluation of 42 formulations for solubilization capacity and physical stability. The three most promising compositions were selected for hot-melt extrusion (HME) tests. In general, a good correlation was found among the results of theoretical predictions, HTS, and HME. Poly(vinylpyrrolidone) (PVP)-based formulations were shown to be easily extrudable, with low degradation and complete amorphicity, whereas in Soluplus, the drug was not miscible, leading to a high crystalline content. The drug release rate was improved more than two times with PVP, and the manufactured ASD was demonstrated to be stable physically and chemically. A fast and effective screening technique to develop stable ASDs for a poorly soluble drug was successfully developed as applied to etravirine. The given method is easy to use, requires a low amount of drug, and is fairly accurate in predicting the amorphization of the drug when formulated. The success of HME formulation development of etravirine was undoubtedly enhanced with this high-throughput tool, which led to the identification of extrudates with improved biopharmaceutical properties. The structural characterization performed by PLM, XRPD, and Raman spectroscopy demonstrated that the HME prototype was essentially amorphous. The unexpected stability at 40 °C/75%RH was correlated with the presence of molecular interaction characterized by Raman spectroscopy.

Fusarihexins A and B: Novel Cyclic Hexadepsipeptides from the Mangrove Endophytic Fungus Fusarium sp. R5 with Antifungal Activities.

Two novel cyclic hexadepsipeptides, fusarihexin A (1: ) and fusarihexin B (2: ), and two known compounds, cyclo-(L-Leu-L-Leu-D-Leu-L-Leu-L-Val) (3: ) and cyclo-(L-Leu-L-Leu-D-Leu-L-Leu-L-Ile) (4: ), were isolated from the marine mangrove endophytic fungus Fusarium sp. R5. Their chemical structures were elucidated on the basis of spectroscopic data and Marfey's analysis. In an in vitro bioassay, fusarihexin A (1: ) remarkably inhibited three plant pathogenic fungi: Colletotrichum gloeosporioides (Penz.) Sacc., which causes anthracnose in many fruits and vegetables, Colletotrichum musae (Berk. and M. A. Curtis) Arx, which causes crown rot and anthracnose in bananas, and Fusarium oxysporum Schlecht. f. sp. lycopersici (Sacc.) W. C. Snyder et H. N. Hansen, which causes Fusarium wilt and fruit rot in tomatoes. Fusarihexin B (2: ) strongly inhibited C. gloeosporioides and C. musae. The compounds were more potent than carbendazim, which is widely used as an agricultural and horticultural fungicide worldwide.

A rapid screening assay for identifying mycobacteria targeted nanoparticle antibiotics.

Antibiotic resistance is a serious problem. Nanotechnology offers enormous potential in medicine, yet there is limited knowledge regarding the toxicity of nanoparticles (NP) for mycobacterial species that cause serious human diseases (e.g. tuberculosis (TB) and leprosy). Mycobacterial diseases are a major global health problem; TB caused by Mycobacterium tuberculosis (Mtb) kills up to 2 million people annually and there are over 200 000 leprosy cases each year caused by Mycobacterium leprae (M. leprae). Few drugs are effective against these mycobacteria and increasing antibiotic resistance exacerbates the problem. As such, alternative therapies are urgently needed but most current assays used to assess the effectiveness of therapeutics against mycobacteria are slow and expensive. This study aimed to develop a rapid, low-cost assay which can be used for screening the antimicrobial properties of compounds against pathogenic mycobacteria and to assess the toxicity of three NP (silver [Ag], copper oxide [Cu(II)O], and zinc oxide [ZnO]) against a green fluorescent protein reporter strain of Mycobacterium avium subspecies paratuberculosis, a slow growing, pathogenic mycobacterial species causing paratuberculosis in ruminants. Fluorescence was used to monitor mycobacterial growth over time, with NP concentrations of 6.25-100 µg/mL tested for up to 7 days, and a method of data analysis was designed to permit comparison between results. Mycobacterial sensitivity to the NP was found to be NP composition specific and toxicity could be ranked in the following order: Ag > Cu(II)O > ZnO.

Immunomodulatory properties of thalidomide analogs: pomalidomide and lenalidomide, experimental and therapeutic applications.

Thalidomide has a broad spectrum of anti-cancer activity. Antitumor activity of thalidomide may be related to a number of known properties, including anti-tumor necrosis factor (TNF)-α and T-cell costimulatory and antiangiogenic activities. The therapeutic potential of thalidomide provided motivation to develop more effective derivatives with considerably reduced toxicity. Thalidomide's immunomodulatory (IMiDs) analogs (lenalidomide, CC-5013; CC-4047, ACTIMID) represent a novel class of compounds with numerous effects on the immune system. Some of these analogs are thought to mediate the anticancer and anti-inflammatory effects observed in humans. Thalidomide is currently approved for the treatment of dermal reaction to leprosy and is currently in phase III trials for multiple myeloma (MM). IMiDs inhibit the cytokine's tumor necrosis factor-α (TNF-α), interleukins (IL) 1ß, 6, 12, and granulocyte macrophage-colony stimulating factor (GM-CSF). The repression of the tumor necrosis factor-a (TNF-α) expression is the crucial factor of many of the anti-inflammatory properties of thalidomide. The mechanisms underlying many of the anti-inflammatory properties of thalidomide, including its ability to co-stimulate T cells, still remain unclear. Some recent patent are also summarized in this review.

Drug effects on intracellular mycobacteria determined by mass spectrometric analysis of the Na(+)-to-K+ ratios of individual bacterial organisms.

The successful establishment of a drug screening system for intracellular cultivable and noncultivable mycobacteria based on the mass spectrometric determination of bacterial viability is described. To compare drug efficacies on intra- and extracellular mycobacteria, the mycobacteria were subjected to drug treatment either after phagocytosis by the mouse macrophage cell line RAW 264.7 or in cell-free medium. After reisolation, their viability was monitored by analyzing the intrabacterial sodium-to-potassium ratios for a limited number of individual organisms. This approach offers a reliable and quick tool for monitoring the influence of intracellular growth and of additional permeation barriers on intracellular drug efficacy and will thus provide useful information for the rational development and testing of optimized antimycobacterial drugs. In particular, the methodology is applicable to the noncultivable species Mycobacterium leprae, because the mass spectrometric analysis of the intrabacterial sodium-to-potassium ratio allows the determination of bacterial viability independent from their ability to multiply in vitro. Because of the improved metabolic activity of intracellularly growing M. leprae compared with that of extracellularly growing M. leprae, the spectrum of antileprosy drugs that can be tested in vitro could even be extended to those interfering with DNA replication and cell division.

In vitro and in vivo activities of macrolides against Mycobacterium leprae.

We previously demonstrated the potent in vitro activity of erythromycin against Mycobacterium leprae as determined by its effect on ATP pools and rates of palmitate oxidation and phenolic glycolipid I synthesis. In the present study, the relative in vitro activities of a number of new macrolides with superior pharmacokinetic properties were assessed. In addition, for the most active compounds, concentrations in serum were determined by bioassay during continuous administration in the feed of mice, and in vivo activity against M. leprae was assessed by the kinetic mouse footpad technique. Both clarithromycin and roxithromycin were more potent than erythromycin in vitro, with the former showing the highest activity in accelerating rates of ATP decay and reducing rates of palmitate oxidation. In mice, concentrations of clarithromycin in serum were higher than those of roxithromycin and erythromycin, with the latter undetectable even when administered at 0.1% (wt/wt) in the diet. When administered at 0.01% (wt/wt) in the diet, erythromycin and roxithromycin were unable to inhibit growth of M. leprae in mouse footpads whereas clarithromycin demonstrated bactericidal-type activity. On the basis of these data and other properties of macrolides, a clinical trial of clarithromycin in leprosy is warranted.

Correlation of in vitro Fc receptor assay with in vivo mouse foot pad method.

Resistant strains of M. leprae have been reported to the various antileprosy drugs. There is currently no accepted test to identify the susceptibility pattern of M. leprae to the drugs in a short period. The only accepted test is the mouse foot method which takes a long period to yield results. The Fc receptor assay using the ability of viable M. leprae to alter the membrane of the macrophage is well established. It takes only ten days and is inexpensive. In 6 cases of leprosy patients the susceptibility pattern was worked out both with the in vitro Fc receptor assay and the vivo in mouse foot method The results correlated very well leading to the fact that the assay system is reliable. Hence it can be used not only to study the status of a patient, but also to shortlist the number of compounds to be tested on the mouse foot pad as anti-leprosy drug candidates.

An approach for the in vitro screening of drugs for activity against leprosy.

Slow growing strains of mycobacteria isolated from leprous tissues present a characteristic resistance pattern to antibacterial agents that is comparable to drug sensitivity of M. leprae in man.