Clofazimine pKa Determination by Potentiometry and Spectrophotometry: Reverse Cosolvent Dependence as an Indicator of the Presence of Dimers in Aqueous Solutions.

The weakly basic antibiotic and anti-inflammatory drug, clofazimine (CFZ), was first described in 1957. It has been used therapeutically, most notably in the treatment of leprosy. However, the compound is extremely insoluble in aqueous media, and, indeed, there is poor consensus about what its intrinsic solubility is since the reported values range from 0.04 to 11 ng/mL. To understand the speciation and solubilization of CFZ as a function of pH, it is of paramount importance to know the true aqueous pKa. However, there is also poor consensus about the value of the pKa (reported measured values range from 6.08 to 9.11). In the present study, we report the determination of the CFZ ionization constant using two independent techniques. A state-of-the-art potentiometric analysis was performed, drawing on titration data in methanol-water solutions (46-75 wt % MeOH) of CFZ, using the bias-reducing consensus of two different procedures of extrapolating the apparent psKa values to zero cosolvent to approximate the true aqueous pKa as 9.43 ± 0.12 (25 °C, I = 0.15 M reference ionic strength). In parallel, spectrophotometric UV/vis titration data were acquired (250-600 nm at different pH) in 10 mM HEPES buffer solutions containing up to 54 wt % MeOH. The alternating least squares (ALS) method was used in the analysis of the absorbance-pH spectra. Uncharacteristically, the cosolvent UV/vis data in our study showed reverse cosolvent dependence (apparent pKa values increased with increasing cosolvent) which could be explained by a dimerization of the free base. The analysis of UV/vis data obtained from 54 wt % MeOH-water solution containing 20 µM CFZ yielded the apparent pKa 9.51 ± 0.17 (I ≈ 0.005 M). To assess whether self-assembly of CFZ was energetically feasible, density functional theory (DFT) calculations were used to study the putative CFZ dimers in aqueous and methanol media. The DFT-optimized geometries and infrared spectra of CFZ dimers using water and methanol as solvents were calculated and analyzed. Based on the lack of negative frequencies in calculated infrared spectra, it was confirmed that optimized geometries correspond to the true energetic minima. Visual analysis of optimized structures indicates the presence of stacking interactions between two CFZ molecules. The protonation site (the imine nitrogen atom) was determined by 1H NMR spectroscopy.

Ecological linkages between biotechnologically relevant autochthonous microorganisms and phenolic compounds in sugar apple fruit (Annona squamosa L.).

Our study investigated the potential of Annona squamosa (L.) fruit as a reservoir of yeasts and lactic acid bacteria having biotechnological implications, and phenolics capable of modifying the ecology of microbial consortia. Only a single species of lactic acid bacteria (Enterococcus faecalis) was identified, while Annona fruit seemed to be a preferred niche for yeasts (Saccharomyces cerevisiae, Hanseniaspora uvarum), which were differentially distributed in the fruit. In order to identify ecological implications for inherent phenolics, the antimicrobial potential of water- and methanol/water-soluble extracts from peel and pulp was studied. Pulp extracts did not show any antimicrobial activity against the microbial indicators, while some Gram-positive bacteria (Staphylococcus aureus, Staphylococcus saprophyticus, Listeria monocytogenes, Bacillus megaterium) were susceptible to peel extracts. Among lactic acid bacteria used as indicators, only Lactococcus lactis and Weissella cibaria were inhibited. The chemical profiling of methanol/water-soluble phenolics from Annona peel reported a full panel of 41 phenolics, mainly procyanidins and catechin derivatives. The antimicrobial activity was associated to specific compounds (procyanidin dimer type B [isomer 1], rutin [isomer 2], catechin diglucopyranoside), in addition to unidentified catechin derivatives. E. faecalis, which was detected in the epiphytic microbiota, was well adapted to the phenolics from the peel. Peel phenolics had a growth-promoting effect toward the autochthonous yeasts S. cerevisiae and H. uvarum.

Solubility and Thermodynamic Data of Febuxostat in Various Mono Solvents at Different Temperatures.

This study examines the solubility and thermodynamics of febuxostat (FBX) in a variety of mono solvents, including "water, methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)" at 298.2−318.2 K and 101.1 kPa. The solubility of FBX was determined using a shake flask method and correlated with "van't Hoff, Buchowski-Ksiazczak λh, and Apelblat models". The overall error values for van't Hoff, Buchowski-Ksiazczak λh, and Apelblat models was recorded to be 1.60, 2.86, and 1.14%, respectively. The maximum mole fraction solubility of FBX was 3.06 × 10−2 in PEG-400 at 318.2 K, however the least one was 1.97 × 10−7 in water at 298.2 K. The FBX solubility increased with temperature and the order followed in different mono solvents was PEG-400 (3.06 × 10−2) > THP (1.70 × 10−2) > 2-BuOH (1.38 × 10−2) > 1-BuOH (1.37 × 10−2) > IPA (1.10 × 10−2) > EtOH (8.37 × 10−3) > EA (8.31 × 10−3) > DMSO (7.35 × 10−3) > MeOH (3.26 × 10−3) > PG (1.88 × 10−3) > EG (1.31 × 10−3) > water (1.14 × 10−6) at 318.2 K. Compared to the other combinations of FBX and mono solvents, FBX-PEG-400 had the strongest solute-solvent interactions. The apparent thermodynamic analysis revealed that FBX dissolution was "endothermic and entropy-driven" in all mono solvents investigated. Based on these findings, PEG-400 appears to be the optimal co-solvent for FBX solubility.

Solubilization of a novel antitumor drug ribociclib in water and ten different organic solvents at different temperatures.

OBJECTIVE: This study reports new solubility and physicochemical data for ribociclib (RCB) in water and ten organic solvents including "methanol (MeOH), ethanol (EtOH), isopropyl alcohol (IPA), n-butanol (n-BuOH), propylene glycol (PG), polyethylene glycol-400 (PEG-400), acetone, ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)" at 293.2-313.2 K and 101.1 kPa. SIGNIFICANCE: The obtained data are useful for the industrial applications of RCB. METHODS: The solubility of RCB was measured and regressed using "van't Hoff, Buchowski-Ksiazczak λh, the modified Apelblat, and Jouyban models." RESULTS: The overall deviations of <4.0% were recorded for all four models. The maximum mole fraction solubility of RCB was 2.66 × 10-2 in PEG-400 at 313.2 K, however, the lowest one was in the water. The RCB solubility increased with temperature and the order followed in the water and ten different organic solvents was PEG-400 (2.66 × 10-2) > THP (1.00 × 10-2) > PG (5.39 × 10-3) > DMSO (5.00 × 10-3) > n-BuOH (3.23 × 10-3) > acetone (3.11 × 10-3) > IPA (1.58 × 10-3) > EA (1.41 × 10-3) > EtOH (1.37 × 10-3) > MeOH (8.10 × 10-4) > water (2.38 × 10-5) at 313.2 K. The maximum solute-solvent interactions were found in RCB-PEG-400 in comparison with other combination of RCB and solvents. "Apparent thermodynamic analysis" indicated an "endothermic and entropy-driven dissolution" of RCB in water and ten organic solvents. CONCLUSIONS: Based on all these data and observations, PEG-400 can be used as the best co-solvent for RCB solubilization.

Supercritical Fluid Chromatography development of a predictive analytical tool to selectively extract bioactive compounds by supercritical fluid extraction and pressurised liquid extraction.

Selective extraction is a great concern in the field of natural products. The interest is to apply specific conditions favouring the solubility of targeted secondary metabolites and avoiding the simultaneous extraction of unwanted ones. Different ways exist to reach selective extractions with suited conditions. These conditions can be determined from experimental studies through experimental design, but a full experimental design takes time, energy, and uses plant samples. Prediction from varied solubility models can also be applied allowing a better understanding of the final selected conditions and eventually less experiments. The aim of this work was to develop and use a chromatographic model to determine optimal extraction conditions without the need for numerous extraction experiments. This model would be applied on the selective extraction of the desired antioxidant compounds in rosemary leaves (rosmarinic and carnosic acids) vs chlorophyll pigments to limit the green colour in extracts. This model was achieved with Supercritical Fluid Chromatography (SFC) and then applied to Supercritical Fluid Extraction (SFE) and Pressurised Liquid Extraction (PLE) assays. SFC models predicted low solubility of chlorophylls for low (5%) and high (100%) percentage of solvent in carbon dioxide. Also, low solubility was predicted with acetonitrile solvent compared to methanol or ethanol. This was confirmed with different extractions performed using SFE with different percentages of solvent (5, 30, and 70%) and with the three solvents used in the SFC models (acetonitrile, methanol and ethanol). Also extractions using PLE were carried out using the same neat solvents in order to confirm the SFC models obtained for 100% of solvent. Globally, extractions validated the SFC models. Only some differences were observed between ethanol and methanol showing the complexity of plant extraction due to matrix effect. For all these extracts, the content of carnosic acid and rosmarinic acid was also monitored and selective extraction conditions of bioactive compounds could be determined.

Solubility measurement, Hansen solubility parameters and solution thermodynamics of gemfibrozil in different pharmaceutically used solvents.

Gemfibrozil (GEM) is cholesterol-lowering agent which is being proposed as poorly water soluble drug (PWSD). Temperature based solubility values of GEM are not yet available in literature or any pharmacopoeia/monograph. Hence, the present studies were carried out to determine the solubility of PWSD GEM (as mole fraction) in various pharmaceutically used solvents such as water (H2O), methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), dimethyl sulfoxide (DMSO) and Transcutol® (THP) at the temperatures ranging from T = 298.2 K-318.2 K under atmospheric pressure P = 0.1 MPa. Equilibrium/experimental solubilities of GEM were recorded by applying a saturation shake flask methodology and regressed using 'van't Hoff and Apelblat models'. Hansen solubility parameters for GEM and various pharmaceutically used solvents were estimated using HSPiP software. The solid states of GEM (both in pure and equilibrated states) were studied by 'Differential Scanning Calorimetry' which confirmed no transformation of GEM after equilibrium. Experimental solubilities of GEM in mole fraction were observed maximum in THP (1.81 × 10-1) followed by DMSO, PEG-400, EA, 1-BuOH, 2-BuOH, IPA, EtOH, PG, MeOH, EG and H2O (3.24 × 10-6) at T = 318.2 K and similar tendencies were also recorded at T = 298.2 K, T = 303.2 K, T = 308.2 K and T = 313.2 K. 'Apparent thermodynamic analysis' on experimental solubilities furnished 'endothermic and entropy-driven dissolution' of GEM in each pharmaceutically used solvent.

Experimental study and thermodynamic modeling for determining the effect of non-polar solvent (hexane)/polar solvent (methanol) ratio and moisture content on the lipid extraction efficiency from Chlorella vulgaris.

In this research, organic solvent composed of hexane and methanol was used for lipid extraction from dry and wet biomass of Chlorella vulgaris. The results indicated that lipid and fatty acid extraction yield was decreased by increasing the moisture content of biomass. However, the maximum extraction efficiency was attained by applying equivolume mixture of hexane and methanol for both dry and wet biomass. Thermodynamic modeling was employed to estimate the effect of hexane/methanol ratio and moisture content on fatty acid extraction yield. Hansen solubility parameter was used in adjusting the interaction parameters of the model, which led to decrease the number of tuning parameters from 6 to 2. The results indicated that the model can accurately estimate the fatty acid recovery with average absolute deviation percentage (AAD%) of 13.90% and 15.00% for the two cases of using 6 and 2 adjustable parameters, respectively.

Cytotoxicity potentials of eleven Bangladeshi medicinal plants.

Various forms of cancer are rising all over the world, requiring newer therapy. The quest of anticancer drugs both from natural and synthetic sources is the demand of time. In this study, fourteen extracts of different parts of eleven Bangladeshi medicinal plants which have been traditionally used for the treatment of different types of carcinoma, tumor, leprosy, and diseases associated with cancer were evaluated for their cytotoxicity for the first time. Extraction was conceded using methanol. Phytochemical groups like reducing sugars, tannins, saponins, steroids, gums, flavonoids, and alkaloids were tested using standard chromogenic reagents. Plants were evaluated for cytotoxicity by brine shrimp lethality bioassay using Artemia salina comparing with standard anticancer drug vincristine sulphate. All the extracts showed potent to moderate cytotoxicity ranging from LC50 2 to 115 µg/mL. The highest toxicity was shown by Hygrophila spinosa seeds (LC50 = 2.93 µg/mL) and the lowest by Litsea glutinosa leaves (LC50 = 114.71 µg/mL) in comparison with standard vincristine sulphate (LC50 = 2.04 µg/mL). Among the plants, the plants traditionally used in different cancer and microbial treatments showed highest cytotoxicity. The results support their ethnomedicinal uses and require advanced investigation to elucidate responsible compounds as well as their mode of action.

Seagrass as a potential source of natural antioxidant and anti-inflammatory agents.

CONTEXT: Halophila spp. is a strong medicine against malaria and skin diseases and is found to be very effective in early stages of leprosy. Seagrasses are nutraceutical in nature and therefore of importance as food supplements. OBJECTIVE: The antibacterial, antioxidant, and anti-inflammatory activities of Halophila ovalis R. Br. Hooke (Hydrocharitaceae) methanol extract were investigated and the chemical constituents of purified fractions were analyzed. MATERIALS AND METHODS: Plant materials were collected from Pondicherry coastal line, and antimicrobial screening of crude extract, and purified fractions was carried out by the disc diffusion method and the minimum inhibitory concentration (MICs) of the purified fractions and reference antibiotics were determined by microdilution method. Antioxidant and anti-inflammatory activities were investigated in vitro. Chemical constituents of purified fractions V and VI were analyzed by gas chromatography-mass spectrometry (GC-MS), and the phytochemicals were quantitatively determined. RESULTS: Methanol extract inhibited the growth of Bacillus cereus at a minimum inhibitory concentration of 50 µg/mL and other Gram-negative pathogens at 75 µg/ml, except Vibrio vulnificus. Reducing power and total antioxidant level increased with increasing extract concentration. H. ovalis exhibited strong scavenging activity on 2,2-diphenyl-1-picrylhydrazyl (DPPH) and superoxide radicals at IC(50) of 0.13 and 0.65 mg/mL, respectively. Methanol extract of H. ovalis showed noticeable anti-inflammatory activity at IC(50) of 78.72 µg/mL. The GC-MS analysis of H. ovalis revealed the presence of triacylglycerols as major components in purified fractions. Quantitative analysis of phytochemicals revealed that phenols are rich in seagrass H. ovalis. DISCUSSION AND CONCLUSION: These findings demonstrated that the methanol extract of H. ovalis exhibited appreciable antibacterial, noticeable antioxidant, and anti-inflammatory activities, and thus could be use as a potential source for natural health products.

Effects of water and water-free polar solvents on the tensile properties of demineralized dentin.

OBJECTIVES: The aim of this study was to test the null hypothesis that the tensile properties of demineralized dentin are not influenced by the hydrogen bonding ability of anhydrous polar solvents. METHODS: Dentin disks 0.5mm thick were prepared from mid-coronal dentin of extracted, unerupted, human third molars. 'I' beam and hour-glass shaped specimens were prepared from the disks, the ends protected with nail varnish and the central regions completely demineralized in 0.5M EDTA for 5 days. Ultimate tensile stress (UTS) and low-strain apparent modulus of elasticity (E) were determined with the specimens immersed for 60 min in water, methanol, HEMA, acetone or air prior to testing in those same media. Apparent moduli of elasticity were measured on the same specimens in a repeated measures experimental design. The results were analyzed with a one-way ANOVA on ranks, followed by Dunn's test at alpha=0.05. Regression analysis examined the relationship between UTS or E and Hansen's solubility parameter for hydrogen bonding (delta(h)) of each solvent. RESULTS: The UTS of demineralized dentin in water, methanol, HEMA, acetone and air was 18(7), 29(7), 31(6), 41(13) and 146(27)MPa, x(SD), n=10. Low-strain E for the same media were 11(7), 43(12), 79(21), 132(31) and 253(115)MPa. Regression analysis of UTS vs delta(h) revealed a significant (p<0.0005, r=-0.69, R(2)=0.48) inverse, exponential relationship. A similar inverse relationship was obtained between low-strain E vs delta(h) (p<0.0001, r=-0.93, R(2)=0.86). SIGNIFICANCE: The tensile properties of demineralized dentin are dependent on the hydrogen bonding ability of polar solvents (delta(h)). Solvents with low delta(h) values may permit new interpeptide H-bonding in collagen that increases its tensile properties. Solvents with high delta(h) values prevent the development of these new interpeptide H-bonds.

Solvation of dried dentin matrix by water and other polar solvents.

PURPOSE: To develop a simple method for measuring the degree of solvation of dried, demineralized dentin matrix by water and other polar solvents. The null hypothesis was that there are no differences in expansion forces produced by different polar solvents. MATERIALS AND METHODS: Midcoronal dentin discs were prepared from extracted, unerupted human third molars. The discs were cut into square specimens with surface areas of 2 x 2, 3 x 3 and 4 x 4 mm and thicknesses of 0.5, 1.0 and 1.5 mm. After demineralization in 0.5 M EDTA (pH 7), the dimensions of the specimens were measured both wet and dry. Dry specimens were held between two parallel steel plates connected to a 50 N load cell which measured the solvation force when water or other polar solvents were added. After measuring the expansion force induced by water, the specimens were fixed in glutaraldehyde and the trials repeated. On additional specimens, repeated measures of expansion forces were obtained using water, methanol, ethanol, n-propanol, n-butanol, ethylene glycol, formamide, hydroxyethylmethacrylate, N,N-dimethyl formamide and acetone in unfixed specimens. RESULTS: Water produced hydration forces as high as 204 g before, and 428 g after glutaraldehyde treatment. The hydration force correlated better with specimen thickness than with surface area. Water solvated the matrix faster than methanol > ethanol > formamide > ethylene glycol. Hydroxyethylmethacrylate, N,N-dimethyl formamide and acetone were unable to solvate the dried matrix. Regression analysis of solvation force vs. Hansen's solubility parameters for dispersive, polar and hydrogen bonding forces demonstrated that solvation force correlations were highest with hydrogen bonding solubility parameters. Measurements of solvation forces provides a simple method for determining solvent-collagen matrix interactions.

Complement fixation and haemagglutination reaction with methanol extracts of icterohaemorrhagiae, canicola and patoc leptospires serovars

Nas reaçöes de fixaçäo de complemento (RFC) os antígenos homólogos apresentaram títulos mais elevados que os heterólogos com soros de coelhos anti-leptospiras. Soros de doadores de banco de sangue, de indivíduos de doença de Chagas, sífilis, hepatite e lepra mostraram se näo reatores na RFC com antígenos metílicos. A análise química dos antígenos revelou a presença de polissacáride e de proteínas. Na reaçäo de hemaglutinaçäo os soros de coelhos antileptospiras, apresentaram reaçäo cruzada com os antígenos heterólogos. Os soros normais e de pacientes com doença de Chagas, sífilis, lepra e hepatite mostraram-se inespecíficos na faixa de diluiçäo de 1:10 a 1:160