Enhanced Oxidation of p-Toluidine Using Supported Zeolite Nanoparticles.

Supported nanomaterials are becoming increasingly important in many industrial processes because of the need to improve both the efficiency and environmental acceptability of industrial processes. The unique properties of supported nanomaterials have attracted researchers to develop efficient catalytic materials in nanoscale. The extremely small size of the particles maximizes the surface area exposed to the reactant, allowing more reactions to occur. The environmental hazards resulting from the conventional manufacturing procedures for organic fine chemicals and intermediates by classical oxidation catalysis using mineral acids have forced chemical industries to seek less polluting processes. The present study aimed to oxidize p-toluidine by hydrogen peroxide in the presence of magnetite supported on nanocrystalline titanium silicalite-1 (M/NTS) zeolite at ambient temperature. The products detected are 4,4'-dimethylazobenzene as major product and 4,4'-dimethylazoxybenzene as minor product. Good selectivity, low cost, low wastage of materials and enhanced environmental friendliness of heterogeneous magnetite nanoparticle supported zeolite catalysts were observed. The effect of various reaction parameters such as mole ratio, catalyst weight and reusability of catalyst were studied. At the optimum reaction conditions, the oxidation activity of M/NTS catalyst was compared with M/NS catalyst, and it was found that titanium in the framework of M/NTS provided higher activity and selectivity.

Potential Anticancer Activity of Juniperus procera and Molecular Docking Models of Active Proteins in Cancer Cells.

Medicinal plants provide a wide range of active compounds that can be exploited to create novel medicines with minimal side effects. The current study aimed to identify the anticancer properties of Juniperus procera (J. procera) leaves. Here, we demonstrate that J. procera leaves' methanolic extract suppresses cancer cells in colon (HCT116), liver (HepG2), breast (MCF-7), and erythroid (JK-1) cell lines. By applying GC/MS, we were able to determine the components of the J. procera extract that might contribute to cytotoxicity. Molecular docking modules were created that used active components against cyclin-dependent kinase 5 (Cdk5) in colon cancer, aromatase cytochrome P450 in the breast cancer receptor protein, the -N terminal domain in the erythroid cancer receptor of the erythroid spectrin, and topoisomerase in liver cancer. The results demonstrate that, out of the 12 bioactive compounds generated by GC/MS analysis, the active ingredient 2-imino-6-nitro-2H-1-benzopyran-3-carbothiamide proved to be the best-docked chemical with the chosen proteins impacted by DNA conformational changes, cell membrane integrity, and proliferation in molecular docking studies. Notably, we uncovered the capacity of J. procera to induce apoptosis and inhibit cell growth in the HCT116 cell line. Collectively, our data propose that J. procera leaves' methanolic extract has an anticancer role with the potential to guide future mechanistic studies.

Highly selective and sensitive spectrofluorimetric method for determination of cypermethrin in different environmental samples.

A sensitive, selective, and simple spectrofluorimetric method for the detection and determination of cypermethrin (CYP) in various samples based on thioglycolic acid-caped Mn-doped ZnS quantum dots (TGA@Mn-ZnS-QDs) is reported. These quantum dots were synthesized using the Gonzalez method. The synthesized quantum dots were structurally characterized with the help of different spectroscopic techniques including X-ray diffraction (XRD) and energy dispersive X-ray (EDX) techniques and fluorescence spectroscopy. The quantum dots were used for spectrofluorimetric detection and determination of CYP. The emission peak of these quantum dots at 632 nm showed a linear quenching with increasing the concentration of CYP, noticing an excellent linear relationship between F°/F values and CYP in the range of 0.5-12 µg mL-1 with a correlation coefficient (R2) of 0.992. The influence of different physiochemical parameters such as time, pH, the concentration of quantum dots, and other pesticides interference on the fluorescence quenching was investigated. The detection limit was calculated to be 0.132 µg mL-1. The developed method was successfully applied for the detection and determination of CYP in various spiked samples (tomato, okra, pea, spinach, soil, and water) using the spike and recovery methods. The percent recoveries of CYP from these samples were found to be 77 ± 0.05% to 95 ± 0.12% at various levels.

Bioactive Tryptophan-Based Copper Complex with Auxiliary ß-Carboline Spectacle Potential on Human Breast Cancer Cells: In Vitro and In Vivo Studies.

Biocompatible tryptophan-derived copper (1) and zinc (2) complexes with norharmane (ß-carboline) were designed, synthesized, characterized, and evaluated for the potential anticancer activity in vitro and in vivo. The in vitro cytotoxicity of both complexes 1 and 2 were assessed against two cancerous cells: (human breast cancer) MCF7 and (liver hepatocellular cancer) HepG2 cells with a non-tumorigenic: (human embryonic kidney) HEK293 cells. The results exhibited a potentially decent selectivity of 1 against MCF7 cells with an IC50 value of 7.8 ± 0.4 µM compared to 2 (less active, IC50 ~ 20 µM). Furthermore, we analyzed the level of glutathione, lipid peroxidation, and visualized ROS generation to get an insight into the mechanistic pathway and witnessed oxidative stress. These in vitro results were ascertained by in vivo experiments, which also supported the free radical-mediated oxidative stress. The comet assay confirmed the oxidative stress that leads to DNA damage. The histopathology of the liver also ascertained the low toxicity of 1.

Role of Copper Oxide on Epoxy Coatings with New Intumescent Polymer-Based Fire Retardant.

Epoxy resins (EP) have been used as a thermos-setting material in the field of coating, casting, bonding agent, and laminating. However, a major drawback associated with its use is the lack of good flaming properties, and it is responsible for heavy smoke along with hazardous gases considerably limiting its uses in various fields. In this study, N-ethanolamine triazine-piperizine, a melamine polymer (ETPMP), was established as a new charring-foaming agent and was successfully synthesized with ethanolamine, piperizine, cyanuric chloride, and melamine as precursor molecules via the nucleophilic substitution reaction method. Elemental analysis and Fourier transform infrared (FTIR) spectroscopy analysis were applied to approve the synthesis of ETPMP and confirmation of its structure and characterization. The epoxy coating of intumescent flame retardant (IFR) was equipped by introducing ETPMP, ammonium polyphosphate (APP), and copper oxide (CuO) in multiple composition ratios. CuO was loaded at various amounts into the IFR-coating system as a synergistic agent. The synergistic action of CuO on IFR coatings was scientifically examined by using different analytical tests such as vertical burning test (UL-94V), limited oxygen index (LOI), thermal gravimetric analysis (TGA), cone calorimeter, and scanning electron microscope (SEM). The results showed that small changes in the amount of CuO expressively amplified the LOI results and enhanced the V-0 ratings in the UL-94V test. The TGA data clearly demonstrate that the inclusion of CuO can transform the thermal deprivation behavior of coatings with a growing char slag proportion with elevated temperatures. Information from cone calorimeter data affirmed that CuO can decrease the burning factors by total heat release (THR) together with peak heat release rate (PHRR). The SEM images indicated that CuO can enrich the power and compression of the intumescent char that restricts the movement of heat and oxygen. Our results demonstrate a positive influence of CuO on the epoxy-headed intumescent flame retardant coatings.

Digital image determination of copper in food and water after preconcentration and magnetic tip separation for in-cavity desorption/color development.

A new analytical method for measuring copper in food and water was developed and validated, employing a solid-phase extraction (SPE) technique combined with digital-image-based (DIB) detection. A novel magnetic adsorbent of zinc ferrite/Citrullus colocynthis biochar (ZF@C.BC) was used to preconcentrate copper. A magnetic tip was used to separate the copper-loaded adsorbent from the extraction medium and to dispense it to the DIB plate. In-situ desorption and development of the spot color with iodide-starch reagent were carried out, and a digital image of the developed spots was captured using a smartphone and processed using ImageJ software. The copper adsorption capacity was 91.3 mg g-1. Desorption was effected using a 0.3 mol L-1 hydrochloric acid. The preconcentration factor was 300, the limit of detection was 4.8 µg L-1, the linearity was 16-600 µg L-1 and the sample throughput was 12 h-1. The developed approach was validated by analyzing food and water samples, confirming recoveries ≥ 91 % and 88 %, respectively, with RSD ≤ 8.4 %, n = 3.

A Review on Organic Colorimetric and Fluorescent Chemosensors for the Detection of Zn(II) Ions.

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and, oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including Schiff bases, thiourea, pyridine, rhodamine, triazole, pyrene, coumarin, imidazole, diaminomaleonitrile, naphthoxazole, pyrimidine, thiophene, thioether, and other functional groups based chemosensors that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Zn(II) ions in different environmental, agricultural, and biological samples. Further, the sensing performances of these chemosensors have been compared and discussed which could help the readers for the future design of organic fluorescent and colorimetric chemosensors for the detection of Zn(II) ions. We hope this study will support the new thoughts to design a simple, efficient, selective, and sensitive chemosensor for the detection of Zn(II) ions in different samples (environmental, agricultural, and biological).

Optical, Thermal, and Electrical Characterization of Polyvinyl Pyrrolidone/Carboxymethyl Cellulose Blend Scattered by Tungsten-Trioxide Nanoparticles.

The polymeric material polyvinyl pyrrolidine/carboxymethyl cellulose (PVP/CMC) was mixed with different quantities of tungsten-trioxide nanoparticles (WO3 NPs). The samples were created using the casting method and Pulsed Laser Ablation (PLA). The manufactured samples were analyzed by utilizing various methods. The halo peak of the PVP/CMC was located at 19.65°, confirming its semi-crystalline nature, as shown in the XRD analysis. FT-IR spectra of pure PVP/CMC composite and PVP/CMC composite incorporated with various contents of WO3 obtained a shift in band locations and change in intensity. Optical band gap was calculated via UV-Vis spectra, which decreased when increasing the laser-ablation time. Thermogravimetric analyses (TGA) curves showed that samples' thermal stability had improved. The frequency-dependent composite films were used to determine AC conductivity of the generated films. When increasing the content of tungsten-trioxide nanoparticles, both (ε') and (ε'') increased. The incorporation of tungsten trioxide enhanced the ionic conductivity of PVP/CMC/WO3 nano-composite to a maximum of 10-8 S/c. It is expected that these studies will have a significant impact on several utilizations, such as energy storage, polymer organic semiconductors, and polymer solar cells.

Bio-Based (Chitosan-ZnO) Nanocomposite: Synthesis, Characterization, and Its Use as Recyclable, Ecofriendly Biocatalyst for Synthesis of Thiazoles Tethered Azo Groups.

In recent years, nanotechnology has become a considerable research interest in the area of preparation of nanocatalysts based on naturally occurring polysaccharides. Chitosan (CS), as a naturally occurring biodegradable and biocompatible polysaccharide, is successfully utilized as an ideal template for the immobilization of metal oxide nanoparticles. In this study, zinc oxide nanoparticles have been doped within a chitosan matrix at dissimilar weight percentages (5, 10, 15, 20, and 25 wt.% CS/ZnO) and have been fabricated by using a simple solution casting method. The prepared solutions of the nanocomposites were cast in a Petri-dish and were subsequently shaped as a thin film. After that, the structural features of the nanocomposite film have been studied by measuring the FTIR, SEM, and XRD analytical tools. FTIR spectra showed the presence of some changes in the major characteristic peaks of chitosan due to interaction with ZnO nanoparticles. In addition, SEM graphs exhibited dramatic morphology changes on the chitosan surface, which is attributed to the surface adsorption of ZnO molecules. Based on the results of the investigated organic catalytic reactions, the prepared CS/ZnO nanocomposite film (20 wt.%) could be a viable an effective, recyclable, and heterogeneous base catalyst in the synthesis of thiazoles. The results showed that the nanocomposite film is chemically stable and can be collected and reused in the investigated catalytic reactions more than three times without loss of its catalytic activity.

Chitosan-Strontium Oxide Nanocomposite: Preparation, Characterization, and Catalytic Potency in Thiadiazoles Synthesis.

Recently, Strontium oxide (SrO) nanoparticles (NPs) and hybrids outperformed older commercial catalysts in terms of catalytic performance. Herein, we present a microwave-assisted easy in situ solution casting approach for the manufacture of strontium oxide nanoparticles doped within a naturally occurring polymer, chitosan (CS), at varying weight percentages (2.5, 5, 10, 15, and 20 wt.% SrO/chitosan). To construct the new hybrid material as a thin film, the produced nanocomposite solutions were cast in petri dishes. The aim of the research was to synthesize these hybrid nanocomposites, characterize them, and evaluate their catalytic potential in a variety of organic processes. The strontium oxide-chitosan nanocomposites were characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques. All the results confirmed the formation of chitosan-strontium oxide nanocomposite. FTIR spectrum of nanocomposite showed the presence of a characteristic peak of Sr-O bond. Furthermore, XRD revealed that SrO treatment increased the crystallinity of chitosan. The particle size was calculated using the Debye-Scherrer formula, and it was determined to be around 36 nm. The CS-SrO nanocomposite has been proven to be a highly efficient base promoter for the synthesis of 2-hydrazono [1,3,4]thiadiazole derivatives. To optimize the catalytic method, the reaction factors were investigated. The approach has various advantages, including higher reaction yields, shorter reaction durations, and milder reaction conditions, as well as the catalyst's reusability for several applications.

Synthesis, characterization and photo-catalytic activity of guar-gum-g-aliginate@silver bionanocomposite material.

The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community. Herein we outline a novel method for the synthesis of silver nanoparticles via a green route using alginate-guar gum blend (GG-Alg@Ag) and their application to degrade methylene blue (MB) dye. The synthesized material was characterized by FTIR, XRD, SEM-EDX, TEM, TGA-DTG, AFM, and UV-vis techniques. A combination of RSM and CCD was employed to compute the system and optimized values of various interacting parameters such as exposure time (120 min), pH (4.98), dye concentration (194 mg L-1), and catalyst dose (0.07 g) with a photodegradation capacity of 92.33% and desirability 1.0. The mechanism of degradation reaction was best elucidated by the pseudo-second-order model suggesting chemical deposition of MB on the GG-Alg@Ag surface through followed by the reduction mechanism in the occupancy of visible light. The optical studies indicated a value of 2.5 eV by Tauc's plot for bandgap energy (E g) for GG-Alg@Ag bionanocomposite.

In Situ Copolymerized Polyacrylamide Cellulose Supported Fe3O4 Magnetic Nanocomposites for Adsorptive Removal of Pb(II): Artificial Neural Network Modeling and Experimental Studies.

The inimical effects associated with heavy metals are serious concerns, particularly with respect to global health-related issues, because of their non-ecological characteristics and high toxicity. Current research in this area is focused on the synthesis of poly(acrylamide) grafted Cell@Fe3O4 nanocomposites via oxidative free radical copolymerization of the acrylamide monomer and its application for the removal of Pb(II). The hybrid material was analyzed using different analytical techniques, including thermogravimetric analysis (TGA), Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis. The efficacious impact of variable parameters, including contact time, pH, material dose, initial Pb(II) concentration, and the temperature, was investigated and optimized using both batch and artificial neural networks (ANN). Surface digestion of metal ions is exceedingly pH-dependent, and higher adsorption efficiencies and adsorption capacities of Pb(II) were acquired at a pH value of 5. The acquired equilibrium data were analyzed using different isotherm models, including Langmuir, Freundlich, Temkin, and Redlich-Peterson models. In this investigation, the best performance was obtained using the Langmuir model. The maximum adsorption capacity of the material investigated via monolayer formation was determined to be 314.47 mg g-1 at 323 K, 239.74 mg g-1 at 313 K, and 100.79 mg g-1 at 303 K.