Parameters Affecting Interfacial Assembly and Alignment of Nanotubes.

Tangential flow interfacial self-assembly (TaFISA) is a promising scalable technique enabling uniformly aligned carbon nanotubes for high-performance semiconductor electronics. In this process, flow is utilized to induce global alignment in two-dimensional nematic carbon nanotube assemblies trapped at a liquid/liquid interface, and these assemblies are subsequently deposited on target substrates. Here, we present an observational study of experimental parameters that affect the interfacial assembly and subsequent aligned nanotube deposition. We specifically study the water contact angle (WCA) of the substrate, nanotube ink composition, and water subphase and examine their effects on liquid crystal defects, overall and local alignment, and nanotube bunching or crowding. By varying the substrate chemical functionalization, we determine that highly aligned, densely packed, individualized nanotubes deposit only at relatively small WCA between 35 and 65°. At WCA (< 10°), high nanotube bunching or crowding occurs, and the film is nonuniform, while aligned deposition ceases to occur at higher WCA (>65°). We find that the best alignment, with minimal liquid crystal defects, occurs when the polymer-wrapped nanotubes are dispersed in chloroform at a low (0.6:1) wrapper polymer to nanotube ratio. We also demonstrate that modifying the water subphase through the addition of glycerol not only improves overall alignment and reduces liquid crystal defects but also increases local nanotube bunching. These observations provide important guidance for the implementation of TaFISA and its use toward creating technologies based on aligned semiconducting carbon nanotubes.

Controlling the Balance between Remote, Pinhole, and van der Waals Epitaxy of Heusler Films on Graphene/Sapphire.

Remote epitaxy is promising for the synthesis of lattice-mismatched materials, exfoliation of membranes, and reuse of expensive substrates. However, clear experimental evidence of a remote mechanism remains elusive. Alternative mechanisms such as pinhole-seeded epitaxy or van der Waals epitaxy can often explain the resulting films. Here, we show that growth of the Heusler compound GdPtSb on clean graphene/sapphire produces a 30° rotated (R30) superstructure that cannot be explained by pinhole epitaxy. With decreasing temperature, the fraction of this R30 domain increases, compared to the direct epitaxial R0 domain, which can be explained by a competition between remote versus pinhole epitaxy. Careful graphene/substrate annealing and consideration of the relative lattice mismatches are required to obtain epitaxy to the underlying substrate across a series of other Heusler films, including LaPtSb and GdAuGe. The R30 superstructure provides a possible experimental fingerprint of remote epitaxy, since it is inconsistent with the leading alternative mechanisms.

A simple simulation-derived descriptor for the deposition of polymer-wrapped carbon nanotubes on functionalized substrates.

Controlling the deposition of polymer-wrapped single-walled carbon nanotubes (s-CNTs) onto functionalized substrates can enable the fabrication of s-CNT arrays for semiconductor devices. In this work, we utilize classical atomistic molecular dynamics (MD) simulations to show that a simple descriptor of solvent structure near silica substrates functionalized by a wide variety of self-assembled monolayers (SAMs) can predict trends in the deposition of s-CNTs from toluene. Free energy calculations and experiments indicate that those SAMs that lead to maximum disruption of solvent structure promote deposition to the greatest extent. These findings are consistent with deposition being driven by solvent-mediated interactions that arise from SAM-solvent interactions, rather than direct s-CNT-SAM interactions, and will permit the rapid computational exploration of potential substrate designs for controlling s-CNT deposition and alignment.

Pnictogens Allotropy and Phase Transformation during van der Waals Growth.

With their ns2 np3 valence electronic configuration, pnictogens are the only system to crystallize in layered van der Waals (vdW) and quasi-vdW structures throughout the group. Light pnictogens crystallize in the A17 phase, and bulk heavier elements prefer the A7 phase. Herein, we demonstrate that the A17 of heavy pnictogens can be stabilized in antimonene grown on weakly interacting surfaces and that it undergoes a spontaneous thickness-driven transformation to the stable A7 phase. At a critical thickness of ∼4 nm, A17 antimony transforms from AB- to AA-stacked α-antimonene by a diffusionless shuffle transition followed by a gradual relaxation to the A7 phase. Furthermore, the competition between A7- and A17-like bonding affects the electronic structure of the intermediate phase. These results highlight the critical role of the atomic structure and substrate-layer interactions in shaping the stability and properties of layered materials, thus enabling a new degree of freedom to engineer their performance.

Solvent-Mediated Affinity of Polymer-Wrapped Single-Walled Carbon Nanotubes for Chemically Modified Surfaces.

Semiconducting single-walled carbon nanotube (s-CNT) arrays are being explored for next-generation semiconductor electronics. Even with the multitude of alignment and spatially localized s-CNT deposition methods designed to control s-CNT deposition, fundamental understanding of the driving forces for s-CNT deposition is still lacking. The individual roles of the dispersant, solvent, target substrate composition, and the s-CNT itself are not completely understood because it is difficult to decouple deposition parameters. Here, we study poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(6,6'-[2,2'-{bipyridine}])] (PFO-BPy)-wrapped s-CNT deposition from solution onto a chemically modified substrate. We fabricate various self-assembled monolayers (SAMs) to gain a greater understanding of substrate effects on PFO-BPy-wrapped s-CNT deposition. We observe that s-CNT deposition is dependent on both the target substrate and s-CNT dispersion solvent. To complement the experiments, molecular dynamics simulations of PFO-BPy-wrapped s-CNT deposition on two different SAMs are performed to obtain mechanistic insights into the effect of the substrate and solvent on s-CNT deposition. We find that the global free-energy minimum associated with favorable s-CNT adsorption occurs for a configuration in which the minimum of the solvent density around the s-CNT coincides with the minimum of the solvent density above a SAM-grafted surface, indicating that solvent structure near a SAM-grafted surface determines the adsorption free-energy landscape driving s-CNT deposition. Our results will help guide informative substrate design for s-CNT array fabrication in semiconductor devices.

Enhancing the signal strength of surface sensitive 2D IR spectroscopy.

Spectroscopic techniques that are capable of measuring surfaces and interfaces must overcome two technical challenges: one, the low coverage of molecules at the surface, and two, discerning between signals from the bulk and surface. We present surface enhanced attenuated reflection 2D infrared (SEAR 2D IR) spectroscopy, a method that combines localized surface plasmons with a reflection pump-probe geometry to achieve monolayer sensitivity. The method is demonstrated at 6 µm with the amide I band of a model peptide, a cysteine terminated α-helical peptide tethered to a gold surface. Using SEAR 2D IR spectroscopy, the signal from this sample is enhanced 20 000-times over a monolayer on a dielectric surface. Like attenuated total reflection IR spectroscopy, SEAR 2D IR spectroscopy can be applied to strongly absorbing solvents. We demonstrated this capability by solvating a peptide monolayer with H2O, which cannot normally be used when measuring the amide I band. SEAR 2D IR spectroscopy will be advantageous for studying chemical reactions at electrochemical surfaces, interfacial charge transfer in photovoltaics, and structural changes of transmembrane proteins in lipid membranes.

Seed-Initiated Anisotropic Growth of Unidirectional Armchair Graphene Nanoribbon Arrays on Germanium.

It was recently discovered that the chemical vapor deposition (CVD) of CH4 on Ge(001) can directly yield long, narrow, semiconducting nanoribbons of graphene with smooth armchair edges. These nanoribbons have exceptional charge transport properties compared with nanoribbons grown by other methods. However, the nanoribbons nucleate at random locations and at random times, problematically giving rise to width and bandgap polydispersity, and the mechanisms that drive the anisotropic crystal growth that produces the nanoribbons are not understood. Here, we study and engineer the seed-initiated growth of graphene nanoribbons on Ge(001). The use of seeds decouples nucleation and growth, controls where growth occurs, and allows graphene to grow with lattice orientations that do not spontaneously form without seeds. We discover that when the armchair direction (i.e., parallel to C-C bonds) of the seeds is aligned with the Ge⟨110⟩ family of directions, the growth anisotropy is maximized, resulting in the formation of nanoribbons with high-aspect ratios. In contrast, increasing misorientation from Ge⟨110⟩ yields decreasingly anisotropic crystals. Measured growth rate data are used to generate a construction analogous to a kinetic Wulff plot that quantitatively predicts the shape of graphene crystals on Ge(001). This knowledge is employed to fabricate regularly spaced, unidirectional arrays of nanoribbons and to significantly improve their uniformity. These results show that seed-initiated graphene synthesis on Ge(001) will be a viable route for creating wafer-scale arrays of narrow, semiconducting, armchair nanoribbons with rationally controlled placement and alignment for a wide range of semiconductor electronics technologies, provided that dense arrays of sub-10 nm seeds can be uniformly fabricated in the future.

Nanotube Alignment Mechanism in Floating Evaporative Self-Assembly.

The challenge of assembling semiconducting single-wall carbon nanotubes (s-SWCNTs) into densely packed, aligned arrays has limited the scalability and practicality of high-performance nanotube-based electronics technologies. The aligned deposition of s-SWCNTs via floating evaporative self-assembly (FESA) has promise for overcoming this challenge; however, the mechanisms behind FESA need to be elucidated before the technique can be improved and scaled. Here, we gain a deeper understanding of the FESA process by studying a stationary analogue of FESA and optically tracking the dynamics of the organic ink/water/substrate and ink/air/substrate interfaces during the typical FESA process. We observe that the ink/water interface serves to collect and confine the s-SWCNTs before alignment and that the deposition of aligned bands of s-SWCNTs occurs at the ink/water/substrate contact line during the depinning of both the ink/air/substrate and ink/water/substrate contact lines. We also demonstrate improved control over the interband spacing, bandwidth, and packing density of FESA-aligned s-SWCNT arrays. The substrate lift rate (5-15 mm min-1) is used to tailor the interband spacing from 90 to 280 µm while maintaining a constant aligned s-SWCNT bandwidth of 50 µm. Varying the s-SWCNT ink concentration (0.75-10 µg mL-1) allows the control of the bandwidth from 2.5 to 45 µm. A steep increase in packing density is observed from 11 s-SWCNTs µm-1 at 0.75 µg mL-1 to 20 s-SWCNTs µm-1 at 2 µg mL-1, with a saturated packing density of ∼24 s-SWCNTs µm-1. We also demonstrate the scaling of FESA to align s-SWCNTs on a 2.5 × 2.5 cm2 scale while preserving high-quality alignment on the nanometer scale. These findings help realize the scalable fabrication of well-aligned s-SWCNT arrays to serve as large-area platforms for next-generation semiconductor electronics.

Triplet exciton dissociation and electron extraction in graphene-templated pentacene observed with ultrafast spectroscopy.

We compare the ultrafast dynamics of singlet fission and charge generation in pentacene films grown on glass and graphene. Pentacene grown on graphene is interesting because it forms large crystals with the long axis of the molecules "lying-down" (parallel to the surface). At low excitation fluence, spectra for pentacene on graphene contain triplet absorptions at 507 and 545 nm and no bleaching at 630 nm, which we show is due to the orientation of the pentacene molecules. We perform the first transient absorption anisotropy measurements on pentacene, observing negative anisotropy of the 507 and 545 nm peaks, consistent with triplet absorption. A broad feature at 853 nm, observed on both glass and graphene, is isotropic, suggesting hole absorption. At high fluence, there are additional features, whose kinetics and anisotropies are not explained by heating, that we assign to charge generation; we propose a polaron pair absorption at 614 nm. The lifetimes are shorter at high fluence for both pentacene on glass and graphene, indicative of triplet-triplet annihilation that likely enhances charge generation. The anisotropy decays more slowly for pentacene on graphene than on glass, in keeping with the smaller domain size observed via atomic force microscopy. Coherent acoustic phonons are observed for pentacene on graphene, which is a consequence of more homogeneous domains. Measuring the ultrafast dynamics of pentacene as a function of molecular orientation, fluence, and polarization provides new insight to previous spectral assignments.

Electronic and Mechanical Properties of Graphene-Germanium Interfaces Grown by Chemical Vapor Deposition.

Epitaxially oriented wafer-scale graphene grown directly on semiconducting Ge substrates is of high interest for both fundamental science and electronic device applications. To date, however, this material system remains relatively unexplored structurally and electronically, particularly at the atomic scale. To further understand the nature of the interface between graphene and Ge, we utilize ultrahigh vacuum scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) along with Raman and X-ray photoelectron spectroscopy to probe interfacial atomic structure and chemistry. STS reveals significant differences in electronic interactions between graphene and Ge(110)/Ge(111), which is consistent with a model of stronger interaction on Ge(110) leading to epitaxial growth. Raman spectra indicate that the graphene is considerably strained after growth, with more point-to-point variation on Ge(111). Furthermore, this native strain influences the atomic structure of the interface by inducing metastable and previously unobserved Ge surface reconstructions following annealing. These nonequilibrium reconstructions cover >90% of the surface and, in turn, modify both the electronic and mechanical properties of the graphene overlayer. Finally, graphene on Ge(001) represents the extreme strain case, where graphene drives the reorganization of the Ge surface into [107] facets. From this work, it is clear that the interaction between graphene and the underlying Ge is not only dependent on the substrate crystallographic orientation, but is also tunable and strongly related to the atomic reconfiguration of the graphene-Ge interface.

Effects of confinement, surface-induced orientations and strain on dynamical behaviors of bacteria in thin liquid crystalline films.

We report on the organization and dynamics of bacteria (Proteus mirabilis) dispersed within lyotropic liquid crystal (LC) films confined by pairs of surfaces that induce homeotropic (perpendicular) or hybrid (homeotropic and parallel orientations at each surface) anchoring of the LC. By using motile vegetative bacteria (3 µm in length) and homeotropically aligned LC films with thicknesses that exceed the length of the rod-shaped cells, a key finding reported in this paper is that elastic torques generated by the LC are sufficiently large to overcome wall-induced hydrodynamic torques acting on the cells, thus leading to LC-guided bacterial motion near surfaces that orient LCs. This result extends to bacteria within LC films with hybrid anchoring, and leads to the observation that asymmetric strain within a hybrid aligned LC rectifies motions of motile cells. In contrast, when the LC film thickness is sufficiently small that confinement prevents alignment of the bacteria cells along a homeotropically aligned LC director (achieved using swarm cells of length 10-60 µm), the bacterial cells propel in directions orthogonal to the director, generating transient distortions in the LC that have striking "comet-like" optical signatures. In this limit, for hybrid LC films, we find LC elastic stresses deform the bodies of swarm cells into bent configurations that follow the LC director, thus unmasking a coupling between bacterial shape and LC strain. Overall, these results provide new insight into the influence of surface-oriented LCs on dynamical bacterial behaviors and hint at novel ways to manipulate bacteria using confined LC phases that are not possible in isotropic solutions.

Highly stretchable carbon nanotube transistors with ion gel gate dielectrics.

Field-effect transistors (FETs) that are stretchable up to 50% without appreciable degradation in performance are demonstrated. The FETs are based on buckled thin films of polyfluorene-wrapped semiconducting single-walled carbon nanotubes (CNTs) as the channel, a flexible ion gel as the dielectric, and buckled metal films as electrodes. The buckling of the CNT film enables the high degree of stretchability while the flexible nature of the ion gel allows it to maintain a high quality interface with the CNTs during stretching. An excellent on/off ratio of >10(4), a field-effect mobility of 10 cm(2) · V(-1) · s(-1), and a low operating voltage of <2 V are achieved over repeated mechanical cycling, with further strain accommodation possible. Deformable FETs are expected to facilitate new technologies like stretchable displays, conformal devices, and electronic skins.

Semiconducting carbon nanotube aerogel bulk heterojunction solar cells.

Using a novel two-step fabrication scheme, we create highly semiconducting-enriched single-walled carbon nanotube (sSWNT) bulk heterojunctions (BHJs) by first creating highly porous interconnected sSWNT aerogels (sSWNT-AEROs), followed by back-filling the pores with [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(71)BM). We demonstrate sSWNT-AERO structures with density as low as 2.5 mg cm(-3), porosity as high as 99.8%, and diameter of sSWNT fibers ≤ 10 nm. Upon spin coating with PC(71)BM, the resulting sSWNT-AERO-PC(71)BM nanocomposites exhibit highly quenched sSWNT photoluminescence, which is attributed to the large interfacial area between the sSWNT and PC(71)BM phases, and an appropriate sSWNT fiber diameter that matches the inter-sSWNT exciton migration length. Employing the sSWNT-AERO-PC(71)BM BHJ structure, we report optimized solar cells with a power conversion efficiency of 1.7%, which is exceptional among polymer-like solar cells in which sSWNTs are designed to replace either the polymer or fullerene component. A fairly balanced photocurrent is achieved with 36% peak external quantum efficiency (EQE) in the visible and 19% peak EQE in the near-infrared where sSWNTs serve as electron donors and photoabsorbers. Our results prove the effectiveness of this new method in controlling the sSWNT morphology in BHJ structures, suggesting a promising route towards highly efficient sSWNT photoabsorbing solar cells.

Dose-controlled, floating evaporative self-assembly and alignment of semiconducting carbon nanotubes from organic solvents.

Arrays of aligned semiconducting single-walled carbon nanotubes (s-SWCNTs) with exceptional electronic-type purity were deposited at high deposition velocity of 5 mm min(-1) by a novel "dose-controlled, floating evaporative self-assembly" process with excellent control over the placement of stripes and quantity of s-SWCNTs deposited. This approach uses the diffusion of organic solvent on the water-air interface to deposit aligned s-SWCNT (99.9%) tubes on a partially submerged hydrophobic substrate, which is withdrawn vertically from the surface of water. By decoupling the s-SWCNT stripe formation from the evaporation of the bulk solution and by iteratively applying the s-SWCNTs in controlled "doses", we show through polarized Raman studies that the s-SWCNTs are aligned within ±14°, are packed at a density of ∼50 s-SWCNTs µm(-1), and constitute primarily a well-ordered monodispersed layer. The resulting field-effect transistor devices show high performance with a mobility of 38 cm(2) V(-1) s(-1) and on/off ratio of 2.2 × 10(6) at 9 µm channel length.

Orientation of a monolayer of dipolar molecules on graphene from X-ray absorption spectroscopy.

Recently, single-walled carbon nanotubes as well as graphene functionalized with azobenzene chromophores have drawn attention for applications in optoelectronics due to their ability to undergo cis-trans isomerization when exposed to light. The electronic properties of the nanocarbon materials at these unconventional interfaces can be tailored by gaining structural insight into the organic monolayers at the molecular level. In this work, we use polarization-dependent X-ray absorption spectroscopy to probe the orientation of three chromophores on graphene, all identical except for their terminal groups. All three terminal groups (methyl, nitro, and nitrile) are well-oriented, with a tilt angle of about 30° from the substrate for the shared azobenzene group. Density functional theory calculations are in good agreement with experimental results and give two similar, stable configurations for the orientation of these molecules on graphene.

Photoexcitation dynamics of coupled semiconducting carbon nanotube thin films.

Carbon nanotubes are a promising means of capturing photons for use in solar cell devices. We time-resolved the photoexcitation dynamics of coupled, bandgap-selected, semiconducting carbon nanotubes in thin films tailored for photovoltaics. Using transient absorption spectroscopy and anisotropy measurements, we found that the photoexcitation evolves by two mechanisms with a fast and long-range component followed by a slow and short-range component. Within 300 fs of optical excitation, 20% of nanotubes transfer their photoexcitation over 5-10 nm into nearby nanotube fibers. After 3 ps, 70% of the photoexcitation resides on the smallest bandgap nanotubes. After this ultrafast process, the photoexcitation continues to transfer on a ~10 ps time scale but to predominantly aligned tubes. Ultimately the photoexcitation hops twice on average between fibers. These results are important for understanding the flow of energy and charge in coupled nanotube materials and light-harvesting devices.

Assembly and Alignment of High Packing Density Carbon Nanotube Arrays Using Lithographically Defined Microscopic Water Features.

High packing density aligned arrays of semiconducting carbon nanotubes (CNTs) are required for many electronics applications. Past work has shown that the accumulation of CNTs at a water-solvent interface can drive array self-assembly. Previously, the confining interface was a large-area, macroscopic feature. Here, we report on the CNT assembly on microscopic water features. Water microdroplets are formed on 10-100 µm wide hydrophilic stripes patterned on a substrate. Exposure to CNTs dispersed in solvent accumulates CNTs at the microdroplet-solvent interface, driving their alignment and deposition at the microdroplet-solvent-substrate contact line. Compared with macroscopic methods in which the contact line uncontrollably moves across the substrate as it is pulled out of the liquids, the hydrophilic patterns and microdroplets allow pinning of the contact line. As CNTs deposit, the contact line self-translates, allowing for dense CNT packing. We realize monolayer CNT arrays aligned within ±3.9° at density of 250 µm-1 and field effect transistors with a high current density of 1.9 mA µm-1 and transconductance of 1.2 mS µm-1 at -0.6 V drain bias and 60 nm channel length.

A 2D chiral microcavity based on apparent circular dichroism.

Engineering asymmetric transmission between left-handed and right-handed circularly polarized light in planar Fabry-Pérot (FP) microcavities would enable a variety of chiral light-matter phenomena, with applications in spintronics, polaritonics, and chiral lasing. Such symmetry breaking, however, generally requires Faraday rotators or nanofabricated polarization-preserving mirrors. We present a simple solution requiring no nanofabrication to induce asymmetric transmission in FP microcavities, preserving low mode volumes by embedding organic thin films exhibiting apparent circular dichroism (ACD); an optical phenomenon based on 2D chirality. Importantly, ACD interactions are opposite for counter-propagating light. Consequently, we demonstrated asymmetric transmission of cavity modes over an order of magnitude larger than that of the isolated thin film. Through circular dichroism spectroscopy, Mueller matrix ellipsometry, and simulation using theoretical scattering matrix methods, we characterize the spatial, spectral, and angular chiroptical responses of this 2D chiral microcavity.

Recent developments in the photophysics of single-walled carbon nanotubes for their use as active and passive material elements in thin film photovoltaics.

The search for environmentally clean energy sources has spawned a wave of research into the use of carbon nanomaterials for photovoltaic applications. In particular, research using semiconducting single-walled carbon nanotubes has undergone dramatic transformations due to the availability of high quality samples through colloidal separation techniques. This has led to breakthrough discoveries on how energy and charge transport occurs in these materials and points to applications in energy harvesting. We present a review of the relevant photophysics of carbon nanotubes that dictate processes important for integration as active and passive material elements in thin film photovoltaics. Fundamental processes ranging from light absorption and internal conversion to exciton transport and dissociation are discussed in detail from both a spectroscopic and a device perspective. We also give a perspective on the future of these fascinating materials to be used as active and passive material elements in photovoltaics.

Light-driven reversible modulation of doping in graphene.

We report a route to noncovalently latch dipolar molecules on graphene to create stable chromophore/graphene hybrids where molecular transformation can be used as an additional handle to reversibly modulate doping while retaining high mobilities. A light switchable azobenzene chromophore was tethered to the surface of graphene via π-π interactions, leading to p-doping of graphene with an hole concentration of ~5 × 10(12) cm(-2). As the molecules switch reversibly from trans to cis form the dipole moment changes, and hence the extent of doping, resulting in the modulation of hole concentration up to ~18% by alternative illumination of UV and white light. Light-driven conductance modulation and control experiments under vacuum clearly attribute the doping modulation to molecular transformations in the organic molecules. With improved sensitivities these "light-gated" transistors open up new ways to enable optical interconnects.