Enzyme-Assisted Coextraction of Phenolics and Polysaccharides from Padina gymnospora.

Brown seaweed is a promising source of polysaccharides and phenolics with industrial utility. This work reports the development of a green enzyme-assisted extraction method for simultaneously extracting polysaccharides and phenolics from the brown seaweed Padina gymnospora. Different enzymes (Cellulast, Pectinex, and Alcalase), individually and in combination, were investigated, with Alcalase alone showing the highest efficiency for the simultaneous extraction of polysaccharides and phenolics. Yields from Alcalase-assisted aqueous extraction were higher than those obtained using either water alone or conventional ethanol extraction. Alcalase-assisted extraction was subsequently optimized using a response surface methodology to maximize compound recovery. Maximal polysaccharide and phenolic recovery was obtained under the following extraction conditions: a water-to-sample ratio of 61.31 mL/g, enzyme loading of 0.32%, temperature of 60.5 °C, and extraction time of 1.95 h. The extract was then fractionated to obtain alginate-, fucoidan-, and phenolic-rich fractions. Fractions exhibited potent 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity with IC50 values of 140.55 µg/mL, 126.21 µg/mL, and 48.17 µg/mL, respectively, which were higher than those obtained from conventional extraction methods. The current work shows that bioactive polysaccharides and phenolics can be obtained together in high yield through a single aqueous-only green and efficient Alcalase-assisted extraction.

Role of proteins in the biosynthesis and functioning of metallic nanoparticles.

Proteins are known to play important roles in the biosynthesis of metallic nanoparticles (NPs), which are biological substitutes for conventionally used chemical capping and stabilizing agents. When a pristine nanoparticle comes in contact with a biological media or system, a bimolecular layer is formed on the surface of the nanoparticle and is primarily composed of proteins. The role of proteins in the biosynthesis and further uptake, translocation, and bio-recognition of nanoparticles is documented in the literature. But, a complete understanding has not been achieved concerning the mechanism for protein-mediated nanoparticle biosynthesis and the role proteins play in the interaction and recognition of nanoparticles, aiding its uptake and assimilation into the biological system. This review critically evaluates the knowledge and gaps in the protein-mediated biosynthesis of nanoparticles. In particular, we review the role of proteins in multiple facets of metallic nanoparticle biosynthesis, the interaction of proteins with metallic nanoparticles for recognition and interaction with cells, and the toxic potential of protein-nanoparticle complexes when presented to the cell.

Unveiling the dermatological potential of marine fungal species components: Antioxidant and inhibitory capacities over tyrosinase.

Marine fungi are a rich source of biologically active molecules, but a poorly explored bioresource for cosmeceutical products. This study evaluates the phytochemistry, antioxidant, and antityrosinase effects of the organic extracts of marine fungi isolated from various marine environments in India. Out of 35 screened fungal strains, methanol extracts of strains P2, Talaromyces stipitatus, and D4, Aspergillus terreus exhibited antityrosinase activity of 45% and 43%, respectively, at the lowest concentration of 0.5 mg/mL. The highest free radicals scavenging activity of 94% and 97% was observed at 500 mg/mL, respectively, of the same fungal extracts. The total phenolic content ranged from 8.20 to 20.30 mg/g of the dry weight of extract, expressed as gallic acid equivalent. GC-MS analysis of T. stipitatus and A. terreus extract identified seven and 10 major compounds, respectively. Some of the major compounds included azetidine, (3E)-3-[(3,5-dimethoxybenzoyl)hydrazono]-N-isobutyl butanamide, aziridine, and 3-methylcyclopentanone, 1,1-dimethylcyclohexane, cyclopentane carboxylic acid, N-allyl-4,5,6,7-tetrahydro-2-benzothiophene-1-carboxamide, cyclo(l-Pro-l-Val), and 3-phenylpropionitrile. In conclusion, this study showed abundant fungal resources in Indian marine environments. A correlation between total phenolic contents of the extracts confirmed that phenolic compounds play an important role in antioxidant as well as antityrosinase activity of the marine fungal extracts and can be viewed as new potential antityrosinase and antioxidant resources.

Seaweed Phenolics as Natural Antioxidants, Aquafeed Additives, Veterinary Treatments and Cross-Linkers for Microencapsulation.

Driven by consumer demand and government policies, synthetic additives in aquafeed require substitution with sustainable and natural alternatives. Seaweeds have been shown to be a sustainable marine source of novel bioactive phenolic compounds that can be used in food, animal and aqua feeds, or microencapsulation applications. For example, phlorotannins are a structurally unique polymeric phenolic group exclusively found in brown seaweed that act through multiple antioxidant mechanisms. Seaweed phenolics show high affinities for binding proteins via covalent and non-covalent bonds and can have specific bioactivities due to their structures and associated physicochemical properties. Their ability to act as protein cross-linkers means they can be used to enhance the rheological and mechanical properties of food-grade delivery systems, such as microencapsulation, which is a new area of investigation illustrating the versatility of seaweed phenolics. Here we review how seaweed phenolics can be used in a range of applications, with reference to their bioactivity and structural properties.

Direct Observation of Amide Bond Formation in a Plasmonic Nanocavity Triggered by Single Nanoparticle Collisions.

The real-time observation of chemical bond formation at the single-molecule level is one of the great challenges in the fields of organic and biomolecular chemistry. Valuable information can be gleaned that is not accessible using ensemble-average measurements. Although remarkably sophisticated techniques for monitoring chemical reactions have been developed, the ability to detect the specific formation of a chemical bond in situ at the single-molecule level has remained an elusive goal. Amide bonds are routinely formed from the aminolysis of N-hydroxysuccinimide (NHS) esters by primary amines, and the protocol is widely used for the synthesis, cross-linking, and labeling of peptides and proteins. Herein, a plasmonic nanocavity was applied to study aminolysis reaction for amide bond formation, which was initiated by single nanoparticle collision events between suitably functionalized free-moving gold nanoparticles and a gold nanoelectrode in an aqueous buffer. By means of simultaneous surface enhanced Raman spectroscopy (SERS) and single-entity electrochemistry (EC) measurements, we have probed the dynamic evolution of amide bond formation in the aminolysis reaction with 10 s of millisecond time resolution. Hence, we demonstrate that single-entity EC-SERS is a valuable and sensitive technique by which chemical reactions can be studied at the single-molecule level.

In Situ Synthesis of CoCeSx Bimetallic Sulfide Nanoparticles on a Bi-Pyrene Terminated Molecular Wire Modified Graphene Surface for Supercapacitors.

The excellent electrical conductivity of graphene is due to its highly-conjugated structures. Manipulation of the electronic and mechanical properties of graphene can be achieved by controlling the destruction of its in-sheet conjugation system. Herein, we report the preparation of CoCeSx -SA@BPMW@RGO through π-π stacking interactions at the molecular level. In this study, sodium alginate was reacted with Co2+ and Ce3+ , and the composite was loaded onto a graphene surface. The graphene sheets were prepared using a bi-pyrene terminated molecular wire (BPMW) to avoid re-stacking of the grapheme sheets, thereby forming nanoscale spaces between sheets. The angle between the BPMW coplanar pyrene group and the phenyl group was 33.2°, and the graphene layer is supported in an oblique direction. Finally, a three-dimensional porous composite was obtained after annealing and vulcanization. The obtained CoCeSx -SA@BPMW@RGO exhibited excellent electrical conductivity and remarkable cycle stability. When the current density was 1 A g-1 , its specific capacitance was as high as 1004 F g-1 . BPMW modifies graphene through the synergistic effect of π-π stacking interaction and special structure to obtain excellent electrochemical performance. Moreover, a solid-state asymmetric supercapacitor device was fabricated based on the synthesized CoCeSx -SA@BPMW@RGO hybrid, which exhibited a power density of 979 W kg-1 at an energy density of 23.96 Wh kg-1 .

Effect of Triton X-100 on the Activity and Selectivity of Lipase Immobilized on Chemically Reduced Graphene Oxides.

The effect of support hydrophobicity on lipase activity and substrate selectivity was investigated with and without Triton X-100 (TX-100). Lipases from Thermomyces lanuginosa (TL) and Alcaligenes sp. (QLM) were immobilized on graphene oxide (GO) and a range of chemically reduced graphene oxides (CRGOs) with different levels of surface hydrophobicity. Activity assays using 4-hydroxy-N-propyl-1,8-naphthalimide (NAP) esters of varying chain lengths (NAP-butyrate (NAP-B), NAP-octanoate (NAP-O), and NAP-palmitate (NAP-P)) showed that the activity of immobilized QLM and TL decreased by more than 60% on GO and 80% on CRGO (2 h), with activity decreasing further as surface hydrophobicity of the CRGOs increased. Across the hydrophobicity range of GO/CRGOs, the substrate selectivity of QLM shifted from more readily hydrolyzing NAP-P to NAP-B, while TL retained its substrate selectivity for NAP-O. Lipase TL was also shown to desorb from GO and 2 h CRGO when mixed with NAP-O and NAP-P, whereas QLM did not. Circular dichroism analyses of the lipase α-helix content correlate to the observed activity data, with decreases in the α-helical content (40% in TL and 20% in QLM relative to free lipase) consistent with decreases in activity after immobilization on GO. α-Helical content decreased even further as the surface hydrophobicity of CRGOs increased. Attenuated total reflectance-Fourier transform infrared spectroscopy also showed significant changes to the lipase secondary structure upon immobilization. The addition of TX-100 into the activity assay modified the substrate selectivity of immobilized QLM, improving the activity against NAP-O (90%) and NAP-P (67%) compared to the activity measured without TX-100. It was shown that TX-100 primarily affected the activity of QLM by interacting with the ester substrate and the lipase itself. This study provides an improved understanding of how support hydrophobicity and the presence of TX-100 can affect activity/selectivity of lipases immobilized on hydrophobic supports.

Structural deformation in pathogenic bacteria cells caused by marine fungal metabolites: An in vitro investigation.

Over the past 50 years, fungal natural products have revolutionized medicine, yielding drugs which have enormous therapeutic potential. The aim of this study was to investigate the probable effect of marine fungal natural products on various skin pathogens. Initially, seventy natural extracts obtained from 35 different marine fungal strains were analysed by the agar well diffusion and broth micro dilution assay for their antibacterial action against six human skin pathogens. The minimum inhibitory effects of all active fungal methanolic extracts on targeted pathogens were observed between 90 and 99% at the concentration of 1 mg/mL. The highest activity was recorded by fungal strains belonging to genera Penicillium, Emericellopsis and Simplicillium. Thereafter, possible effects on target bacterial cells were studied by scanning electron microscopy which show significant destruction and structural deformation in the bacterial cell wall. The results of the present study provided good evidence that the studied marine fungi can be a potential source of natural antibacterial agents against skin bacterial pathogens.

Solvent Effect on Supramolecular Self-Assembly of Chlorophylls a on Chemically Reduced Graphene Oxide.

Solvent plays an important role in the surface interaction of molecules. In this study, we use "chlorophyll a", an archetypical molecule, to investigate its supramolecular self-assembly with chemically reduced graphene oxide in three different types of solvents: polar protic, polar aprotic, and non-polar. It was observed that only a polar protic solvent that can donate protons facilitates the hydrogen bonding between chlorophyll a and chemically reduced graphene oxide nanosheets in a hybrid system. The formation of hydrogen bonds further initiates the other non-covalent interactions such as π-π stacking and hydrophobic interaction, which altogether play a key driving force for supramolecular self-assembly of chlorophylls on chemically reduced graphene oxides. The experimental results are strongly supported by density functional theory calculations, which show robust electron coupling between chlorophylls and chemically reduced graphene oxide.

Protein Paper from Exfoliated Eri Silk Nanofibers.

The exfoliation of silk fiber is an attractive method to produce silk micro- and nanofibers that retain the secondary structure of native silk. However, most fibrillation methods used to date require the use of toxic and/or expensive solvents and the use of high energy. This study describes a low cost, scalable method to produce microfibrillated silk nanofibers without the use of toxic chemicals by controlling the application of shear using commercially scalable milling and homogenization equipment. Manipulation of the degumming conditions (alkaline concentration and degumming temperature) and the shear in milling and/or homogenization enabled control over the degree of fibrillation. The microfibrillated silk was then characterized to determine structural change during processing and the stability of the resulting suspensions at different pH. Silk nanofibers obtained from milling degummed silk were characterized using atomic force microscopy. Nanofibers obtained both with and without high-pressure homogenization were then used to produce silk "protein paper" through casting. Silk degumming conditions played a critical role in determining the degree of microfibrillation and the properties of the cast silk papers. The silk papers produced from homogenized nanofibers showed excellent mechanical properties, high water absorption, and wicking properties. The silk papers were excellent for supporting the attachment and growth of human skin keratinocytes, demonstrating application possibilities in healthcare such as wound healing.

LC-ESI-QTOF-MS/MS Characterization of Seaweed Phenolics and Their Antioxidant Potential.

Seaweed is an important food widely consumed in Asian countries. Seaweed has a diverse array of bioactive compounds, including dietary fiber, carbohydrate, protein, fatty acid, minerals and polyphenols, which contribute to the health benefits and commercial value of seaweed. Nevertheless, detailed information on polyphenol content in seaweeds is still limited. Therefore, the present work aimed to investigate the phenolic compounds present in eight seaweeds [Chlorophyta (green), Ulva sp., Caulerpa sp. and Codium sp.; Rhodophyta (red), Dasya sp., Grateloupia sp. and Centroceras sp.; Ochrophyta (brown), Ecklonia sp., Sargassum sp.], using liquid chromatography electrospray ionization quadrupole time-of-flight mass spectrometry (LC-ESI-QTOF-MS/MS). The total phenolic content (TPC), total flavonoid content (TFC) and total tannin content (TTC) were determined. The antioxidant potential of seaweed was assessed using a 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging assay, a 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) free radical scavenging assay and a ferric reducing antioxidant power (FRAP) assay. Brown seaweed species showed the highest total polyphenol content, which correlated with the highest antioxidant potential. The LC-ESI-QTOF-MS/MS tentatively identified a total of 54 phenolic compounds present in the eight seaweeds. The largest number of phenolic compounds were present in Centroceras sp. followed by Ecklonia sp. and Caulerpa sp. Using high-performance liquid chromatography-photodiode array (HPLC-PDA) quantification, the most abundant phenolic compound was p-hydroxybenzoic acid, present in Ulva sp. at 846.083 ± 0.02 µg/g fresh weight. The results obtained indicate the importance of seaweed as a promising source of polyphenols with antioxidant properties, consistent with the health potential of seaweed in food, pharmaceutical and nutraceutical applications.

Investigating the Mechanism for the Enhanced Oxidation Stability of Microencapsulated Omega-3 Concentrates.

Enzymatically concentrated anchovy oil (concentrate) is known to be much less stable than unconcentrated anchovy oil. However, we previously showed that concentrate surprisingly forms more stable microcapsules, when produced by complex coacervation, than does unconcentrated anchovy oil. Here we investigate the mechanism of this unexpected stability. We also investigate whether or not incorporation of concentrate can be used as an additive to improve the stability of unconcentrated anchovy oil microcapsules. Results showed that microcap stability increased as the amount of added concentrate increased. Decreased emulsion droplet size, lower positively charged zeta potential, and higher surface hydrophobicity were observed in the oil/water (O/W) emulsion, with the incorporation of concentrate in the oil phase, compared with the unconcentrated anchovy oil O/W emulsion. Both the decreased zeta potential and the increased hydrophobicity of concentrate in the mixed oil phase may improve droplet agglomeration, leading to enhanced oxidative stability of the concentrate-containing microcapsules. Decreased repulsive forces between droplets result in a more compact structure, thicker outer shell, and smoother surface, resulting in enhanced oxidation stability of the concentrate-containing microcapsules.

Large and Small Assembly: Combining Functional Macromolecules with Small Peptides to Control the Morphology of Skeletal Muscle Progenitor Cells.

The material properties of natural tissues, such as skeletal muscle, are highly sophisticated and are synthetically challenging to mimic. Using natural biomacromolecules to functionalize self-assembled peptide (SAP) hydrogels has the potential to increase the utility of these materials by more closely reproducing the natural cellular environment. Here, to demonstrate that a conserved co-assembly pathway can retain distinct function, the biocompatible peptide derivative Fmoc-FRGDF was co-assembled with either a sulfated polysaccharide, fucoidan, or the provisional matrix proteoglycan, versican. Our results demonstrate that thermodynamically driven co-assembly with biologically active macromolecules is facile, stable, and does not affect the final assembled nanostructure. Biologically, the incorporation of these functionally distinct molecules had no effect on C2C12 myoblast proliferation and viability but strongly altered their morphology. The surface area of myoblasts cultured on the fucoidan scaffold was reduced at 24 and 72 h post seeding, with a reduction in the formation of multinucleated syncytia. Myoblasts cultured on versican scaffolds were smaller compared to cells grown on the empty vector scaffolds at 24 h but not 72 h post seeding, with multinucleated syncytia formation being unaffected. This work allows programmed and distinct morphological effects of cell behavior, paving the way for further mechanistic studies.

Simultaneously 'pushing' and 'pulling' graphene oxide into low-polar solvents through a designed interface.

Dispersing graphene oxide (GO) in low-polar solvents can realize a perfect self-assembly with functional molecules and application in removal of organic impurities that only dissolve in low-polar solvents. The surface chemistry of GO plays an important role in its dispersity in these solvents. The direct transfer of hydrophilic GO into low-polar solvents, however, has remained an experimental challenge. In this study, we design an interface to transfer GO by simultaneously 'pushing and pulling' the nanosheets into low-polar solvents. Our approach is outstanding due to the ability to obtain monolayers of chemically reduced GO (CRGO) with designed surface properties in the organic phase. Using the transferred GO or CRGO dispersions, we have fabricated GO/fullerene nanocomposites and assessed the ability of CRGOs for dye adsorption. We hope our work can provide a universal approach for the phase transfer of other nanomaterials.

Detection of biogenic amines in pet food ingredients by RP-HPLC with automated dansyl chloride derivatization.

The detection of biogenic amines is of significant interest to the food industry, as they can be used as indicators of food spoilage and they are potentially toxic. Because of their importance, there is a need for automated methods suitable for industry use that can detect a wide range of biogenic amines at sufficient levels for food analysis. In this work, optimized conditions for the automated determination of biogenic amines (histamine, putrescine, cadaverine, spermine, spermidine, tyramine, and tryptamine) derivatized with dansyl chloride are presented. Limits of detection below 0.2 ppm were achieved for seven biogenic amines and percentage recoveries were between 80 and 109% for the seven analytes spiked into meat meal samples. The method is simple and compared well to an existing method for the detection of biogenic amines in pet food ingredients.

In-vitro evaluation of marine derived fungi against Cutibacterium acnes.

Cutibacterium acnes (or Propionibacterium acnes) is the main target for the prevention and medical treatment of acne vulgaris. The aim of this study was to evaluate the in vitro anti-C. acnes and anti-S. epidermidis properties of some marine fungi isolated from different Indian marine environments. Seventy fungal isolates were obtained from samples collected from the west coasts and Andaman Island, India. Methanol extracts of 35 isolates were screened for their antibacterial properties and 5 out of the 35 isolates displayed significant inhibition as compared with tetracycline. DNA was successfully extracted from these five fungal isolates and phylogenetic analysis was performed. The methanol extracts possessed antibacterial activity against C. acnes and S. epidermidis with MIC values ranged from 0.8 mg/mL to 1 mg/mL. SEM analysis revealed that the extract induces deleterious morphological changes in the bacterial cell membrane. This study has identified some fungi extracts with significant antibacterial activity. The extracts may have potential for development as an antibacterial agent in the treatment of acne vulgaris.

Bioethanol production by a xylan fermenting thermophilic isolate Clostridium strain DBT-IOC-DC21.

To overcome the challenges associated with combined bioprocessing of lignocellulosic biomass to biofuel, finding good organisms is essential. An ethanol producing bacteria DBT-IOC-DC21 was isolated from a compost site via preliminary enrichment culture on a pure hemicellulosic substrate and identified as a Clostridium strain by 16S rRNA analysis. This strain presented broad substrate spectrum with ethanol, acetate, lactate, and hydrogen as the primary metabolic end products. The optimum conditions for ethanol production were found to be an initial pH of 7.0, a temperature of 70 °C and an L-G ratio of 0.67. Strain presented preferential hemicellulose fermentation when compared to various substrates and maximum ethanol concentration of 26.61 mM and 43.63 mM was produced from xylan and xylose, respectively. During the fermentation of varying concentration of xylan, a substantial amount of ethanol ranging from 25.27 mM to 67.29 mM was produced. An increased ethanol concentration of 40.22 mM was produced from a mixture of cellulose and xylan, with a significant effect observed on metabolic flux distribution. The optimum conditions were used to produce ethanol from 28 g L-1 rice straw biomass (RSB) (equivalent to 5.7 g L-1 of the xylose equivalents) in which 19.48 mM ethanol production was achieved. Thus, Clostridium strain DBT-IOC-DC21 has the potential to perform direct microbial conversion of untreated RSB to ethanol at a yield comparative to xylan fermentation.

An Aspergillus aculateus strain was capable of producing agriculturally useful nanoparticles via bioremediation of iron ore tailings.

Mining waste such as iron ore tailing is environmentally hazardous, encouraging researchers to develop effective bioremediation technologies. Among the microbial isolates collected from iron ore tailings, Aspergillus aculeatus (strain T6) showed good leaching efficiency and produced iron-containing nanoparticles under ambient conditions. This strain can convert iron ore tailing waste into agriculturally useful nanoparticles. Fourier-transform Infrared Spectroscopy (FT-IR analysis) established the at the particles are protein coated, with energy dispersive X-ray Spectroscopy (EDX analysis) showing strong signals for iron. Transmission Electron Microscopy (TEM analysis) showed semi-quasi spherical particles having average size of 15 ±â€¯5 nm. These biosynthesized nanoparticles when tested for their efficacy on seed emergence activity of mungbean (Vigna radiata) seeds, and enhanced plant growth at 10 and 20 ppm.

Development of a novel myconanomining approach for the recovery of agriculturally important elements from jarosite waste.

In this study, an ecofriendly and economically viable waste management approach have been attempted towards the biosynthesis of agriculturally important nanoparticles from jarosite waste. Aspergillus terreus strain J4 isolated from jarosite (waste from Debari Zinc Smelter, Udaipur, India), showed good leaching efficiency along with nanoparticles (NPs) formation under ambient conditions. Fourier-transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) confirmed the formation of NPs. Energy dispersive X-ray spectroscopy (EDX analysis) showed strong signals for zinc, iron, calcium and magnesium, with these materials being leached out. TEM analysis and high resolution transmission electron microscopy (HRTEM) showed semi-quasi spherical particles having average size of 10-50nm. Thus, a novel biomethodology was developed using fungal cell-free extract for bioleaching and subsequently nanoconversion of the waste materials into nanostructured form. These biosynthesized nanoparticles were tested for their efficacy on seed emergence activity of wheat (Triticum aestivum) seeds and showed enhanced growth at concentration of 20ppm. These nanomaterials are expected to enhance plant growth properties and being targeted as additives in soil fertility and crop productivity enhancement.

Graphene-Oxide-Based Enzyme Nanoarchitectonics for Substrate Channeling.

The controlled spatial organization or compartmentalization of multi-enzyme cascade reactions to transfer a substrate from one enzyme to another for substrate channeling on scaffolds has sparked increasing interest in recent years. Here, we use graphene oxides to study the dependence of the activity of cascade reactions in a closely packed, randomly immobilized enzyme system on a 2 D scaffold. We first observe that the hydrophobicity of graphene oxides and various enzyme architectures for co-immobilized systems are important attributes for achieving high product-conversion rates. A transient time close to 0 s can be achieved if enzymes are randomly immobilized close to one another, owing to direct molecular channeling. This contributes to overcoming complications regarding control of the spatial arrangement of the enzymes. Furthermore, a fabricated bienzyme paper can be used for glucose detection with high stability, reusability, and enhanced substrate channeling. Our findings provide new guidance for enzyme orientation on 2 D scaffolds, which may be extrapolated to other multienzyme cascade systems.