ABSTRACT
Dynamic access to quasi-bound states in the continuum (q-BICs) offers a highly desired platform for silicon-based active nanophotonic applications, while the prevailing tuning approaches by free carrier injections via an all-optical stimulus are yet limited to THz and infrared ranges and are less effective in visible bands. In this work, we present the realization of active manipulations on q-BICs for nanoscale optical switching in the visible by introducing a local index perturbation through a photothermal mechanism. The sharp q-BIC resonance exhibits an ultrasensitive susceptibility to the complex index perturbation, which can be flexibly fulfilled by optical heating of silicon. Consequently, a mild pump intensity of 1 MW/cm2 can yield a modification of the imaginary part of the refractive index of less than 0.05, which effectively suppresses the sharp q-BIC resonances and renders an active modulation depth of reflectance exceeding 80%. Our research might open up an enabling platform for ultrasensitive dynamic nanophotonic devices.
ABSTRACT
Multi-focusing of light is a crucial capability for photonic devices that can be effectively achieved by precisely modulating the phase delay on the incident wavefront. However, integrating functional structures into optical fibers for remote light focusing remains challenging due to the complex device design and limited fabrication approaches. Here, we present the design and fabrication of metalens array on the end-face of a tailored single-mode step-index fiber for focusing light field into closely packed focal spot array. The metalenses are configured based on the fractional Talbot effect and benefit a modular design capability. Light passing through the optical fiber can be focused into different focal planes. With a synergistic 3D laser nanoprinting technique based on two-photon polymerization, high-quality meta-fibers are demonstrated for focusing light parallelly with a uniform numerical aperture (NA) as high as approximately 0.77. This may facilitate various applications such as optical trapping, generation of sophisticated beam profiles, and boosting light coupling efficiencies.
ABSTRACT
The 3D structured light field manipulated by a digital-micromirror-device (DMD)-based digital hologram has demonstrated its superiority in fast-fabricating stereo nanostructures. However, this technique intrinsically suffers from defects of light intensity in generating modulated focal spots, which prevents from achieving high-precision micro/nanodevices. In this Letter, we have demonstrated a compensation approach based on adapting spatial voxel density for fabricating optical metalenses with ultrahigh precision. The modulated focal spot experiences intensity fluctuations of up to 3% by changing the spatial position, leading to a 20% variation of the structural dimension in fabrication. By altering the voxel density to improve the uniformity of the laser cumulative exposure dosage over the fabrication region, we achieved an increased dimensional uniformity from 94.4% to 97.6% in fabricated pillars. This approach enables fast fabrication of metalenses capable of sub-diffraction focusing of 0.44λ/NA with the increased mainlobe-sidelobe ratio from 1:0.34 to 1:0.14. A 6 × 5 supercritical lens array is fabricated within 2â min, paving a way for the fast fabrication of large-scale photonic devices.
ABSTRACT
Mechanically induced chromosome reorganization plays important roles in transcriptional regulation. However, the interplay between chromosome reorganization and transcription activities is complicated, such that it is difficult to decipher the regulatory effects of intranuclear geometrical cues. Here, we simplify the system by introducing DNA, packaging proteins (i.e., histone and protamine), and transcription factor NF-κB into a well-defined fluidic chip with changing spatical confinement ranging from 100 to 500 nm. It is uncovered that strong nanoconfinement suppresses higher-order folding of histone- and protamine-DNA complexes, the fracture of which exposes buried DNA segments and causes increased quantities of NF-κB binding to the DNA chain. Overall, these results reveal a pathway of how intranuclear geometrical cues alter the open/closed state of a DNA-protein complex and therefore affect transcription activities: i.e., NF-κB binding.
Subject(s)
Histones , NF-kappa B , NF-kappa B/metabolism , Histones/metabolism , Protamines/metabolism , DNA-Binding Proteins/metabolism , DNA/metabolism , Protein Binding , Transcription, GeneticABSTRACT
Featured with its extraordinary super-resolution capability, the advent of stimulated emission depletion (STED) lithography has allowed for vastly reduced minimum feature size of a single pixel down to the deep sub-diffraction scale so as to produce unprecedented nanofeatures. However, the anticipated sub-diffraction pixel pitch down below 100â nm remains out of reach due to redundant polymerization of adjacent exposures at a short distance, so called memory effect. In this work, a nanoprinting-at-expansion/employments-at-recovery strategy is applied in the dual-beam STED lithography technique to surmount the memory effect and break adjacent-exposure limit imposed on minimizing the pixel pitch. The implementation of a femtosecond laser at a wavelength of 532â nm, the same as the inhibition laser beam, working as the initiation laser beam, can drastically reduce the saturated inhibition laser intensity by 74% for abating redundant polymerization subjected to multiple exposures in realizing nanoscale pixel pitch. The adjacent-exposure zone can be separated by isotropically expanding an elastic PDMS substrate for further diminishing redundant polymerization. Applying stretching ratio of 30%, a minimum super-resolved nanodots pixel pitch of 96â nm was achieved with single-dot size of 34â nm on both planar and hierarchical substrate, which offers a record-close distance for printing adjacent pixels. With its nanometer discernibility, this method holds great promise for future versatile utilization in advanced nanoimprinting, high density data storage, etc.
ABSTRACT
The supercritical lens has shown a remarkable capability of achieving far-field sub-diffraction limited focusing through elaborating a modulated interference effect. Benefiting from the relative high energy utilization efficiency and weak sidelobe properties, the supercritical lens holds significant advantage in a series of application scenarios. However, all of the demonstrated supercritical lenses mainly work in the on-axis illumination condition, so the off-axis aberration effect will severely deteriorate its sub-diffraction limit focusing capability for the illuminating beam with an oblique angle. In this work, an aberration-compensated supercritical lens with single-layer configuration is proposed and experimentally demonstrated. Such a single-layer supercritical lens consists of multilevel phase configurations patterned with the two-photon polymerization lithography technique. The simulation and experimental recorded results show that the aberration-compensated supercritical lens with a numerical aperture value of 0.63 could achieve a far-field sub-diffraction limited focusing property within 20° field of view at a wavelength of λ = 633â nm. This monochromatic aberration-compensated supercritical lens with single-layer configuration indicates excellent potential in the development of laser scanning ultrahigh optical storage and label free super-resolution imaging.
ABSTRACT
Intelligent droplet manipulation plays a crucial role in both scientific research and industrial technology. Inspired by nature, meniscus driving is an ingenious way to spontaneously transport droplets. However, the shortages of short-range transport and droplet coalescence limit its application. Here, an active droplet manipulation strategy based on the slippery magnetic responsive micropillar array (SMRMA) is reported. With the aid of a magnetic field, the micropillar array bends and induces the infusing oil to form a moving meniscus, which can attract nearby droplets and transport them for a long range. Significantly, clustered droplets on SMRMA can be isolated by micropillars, avoiding droplet coalescence. Moreover, through adjusting the arrangement of the micropillars of SMRMA, multi-functional droplet manipulation such as unidirectional droplet transport, multi-droplet transport, droplet mixing, and droplet screening can be achieved. This work provides a promising approach for intelligent droplet manipulation and unfolds broad application prospects in microfluidics, microchemical reaction, biomedical engineering, and other fields.
ABSTRACT
Manipulation of light energy flow within the tight focus not only is important to the fundamental study of light-matter interactions but also underpins significant practical applications. However, the coupling between the electric and the magnetic fields of a focused light beam sets a fundamental barrier for independent control of these field components, restricting the focal energy flow primarily in the axial direction. In this paper, a 4π microscopic configuration is theoretically proposed to untangle the tight relation between the electric field and the magnetic field in a subwavelength-scale focal voxel. By independently altering the amplitudes of different field components in the focal region, energy flow with three-dimensionally unlimited orientation and ultra-high orientation purity (more than 90%) can be generated. This result expands the flexibility of energy flow manipulations and holds great potential in nanophotonics such as light scattering and optical force at subwavelength dimensions.
ABSTRACT
Directional manipulation of submerged bubbles is fundamental for both theoretical research and industrial production. However, most current strategies are limited to the upward motion direction, complex surface topography, and additional apparatuses. Here, we report a meniscus-induced self-transport platform, namely, a slippery oil-infused pillar array with height-gradient (SOPAH) by combining femtosecond laser drilling and replica mold technology. Owing to the unbalanced capillary force and Laplace pressure difference, bubbles on SOPAH tend to spontaneously transport along the meniscus gradient toward a higher elevation. The self-transport performances of bubbles near the pillars depend on the complex meniscus shape. Significantly, to understand the underlying transport mechanism, the 3D meniscus profile is simulated by solving the Young-Laplace equation. It is found that the concave valleys formed between the adjacent pillars can change the gradient direction of the meniscus and lead to the varied transport performances. Finally, by taking advantage of a water electrolysis system, the assembled SOPAH serving as a bubble-collecting device is successfully deployed. This work should not only bring new insights into the meniscus-induced self-transport dynamics but also benefit potential applications in the field of intelligent bubble manipulation.
ABSTRACT
Planar metalenses provide an effective way to break the diffraction barrier in the far field. Their physical mechanism and applications have been intensively studied in the past decade. These investigations on sub-diffraction-limited light modulations have only been applied to specified single immersion environments; however, changing immersion environments can severely degrade their focusing performance, limiting their application potential. In this work, we propose and experimentally demonstrate an environmentally robust immersion supercritical lens (SCL) that can work in various immersion environments. The design of such a lens is based on the vectorial Rayleigh-Sommerfeld diffraction theory combined with a multi-objective optimization algorithm. The sub-diffraction-limited focusing effect has been experimentally demonstrated in commonly used media, including air, water, and oil, with refractive indices of 1.0, 1.33, and 1.51, respectively. Moreover, such a lens can maintain its effective numerical aperture at a fixed value, bringing a unique advantage in that the lateral size of the focal spots exhibits a similar value of ${{317}}\;{{\pm}}\;{{7}}\;{\rm{nm}}$ in all three media. Our demonstration provides the feasibility of SCLs in various application scenarios with multi-immersion environments, such as bioimaging, light trapping, and optical storage.
ABSTRACT
Here, we demonstrate a flat nanofocalizer for converging light field into a uniform subwavelength light spot array based on the fractional Talbot effect by developing a direct laser writing technique with 3D fabrication precision. The fractional Talbot effect endows the device with the merits of high compression ratio and modular design capability for transforming a plane wave into arrayed light focal spots. By combining a synergistic laser printing technique, we introduce a buffer layer for improving the fabrication precision of structural height in favor of accurately manipulating the phase delay. For a given light wavelength at 750 nm, by precisely producing a nanofocalizer consisting of periodic unit elements with the dimensions of 300(width)×600(length)×585(height)nm, we have achieved 5×6 light spot array with modular design, while the full width at half-maximum of a single focused light spot can be reduced to â¼0.82λ. Our research may pave the way for realizing subwavelength optical devices capable of being readily integrated to existing optical systems.
ABSTRACT
Recent demonstrations of metasurfaces present their great potential to implement flat and multifunctional optical elements, which are accomplished with the designs of planar optics and micro-/nano- fabrications. Integrating metasurfaces in three dimensions has manifested drastically increasing advantages in manipulating light fields by extending design freedom. However, fabricating three-dimensional metasurfaces remain a tough challenge due to the lack of stereo printing protocols. Herein, we demonstrate laser nanoprinting of floated silver nanoparticle array in transparent hydrogel films for 3D metasurface to achieve color patterning. It is found that spatially resolved nanoparticles can be produced through laser induced photoreduction of silver ions and robustly anchored to the gel backbones by a focused femtosecond laser beam within a pH-responsive smart hydrogel matrix. With the aid of expansion properties of the pH-responsive hydrogel, repetitive coloration of the patterned plasmonic nanoparticle array over a wide spectrum range is achieved via reversible regulation of nanoparticle spacing from 550 to 350 nm and vice versa. This approach allows broadband 3D color-regulation in nanoscale for applications in active spectral filtering, information encryption, security tagging and biological colorimetric sensing, etc.
ABSTRACT
Owing to its good air stability and high refractive index, two-dimensional (2D) noble metal dichalcogenide shows intriguing potential for versatile flat optics applications. However, light field manipulation at the atomic scale is conventionally considered unattainable because the small thickness and intrinsic losses of 2D materials completely suppress both resonances and phase accumulation effects. Here, we demonstrate that losses of structured atomically thick PtSe2 films integrated on top of a uniform substrate can be utilized to create the spots of critical coupling, enabling singular phase behaviors with a remarkable π phase jump. This finding enables the experimental demonstration of atomically thick binary meta-optics that allows an angle-robust and high unit thickness diffraction efficiency of 0.96%/nm in visible frequencies (given its thickness of merely 4.3 nm). Our results unlock the potential of a new class of 2D flat optics for light field manipulation at an atomic thickness.
ABSTRACT
We propose and demonstrate a low-loss fiber-to-chip vertical coupler on the silicon photonic platform by using a 3D two-photon fabrication method. Such a coupler significantly reduces insertion loss, measured to be 1 dB, and provides a wide working wavelength range for both TE and TM polarizations over the entire C-band. Moreover, a large tolerance for misalignment of the coupling fiber, up to 4.5 µm for a 1 dB loss, enables the development of relaxed alignment techniques.
ABSTRACT
Microlens arrays (MLAs) are widely used in optical imaging, dense wavelength division multiplexing, optical switching, and microstructure patterning, etc. However, the light modulation capability for both the conventional refractive-type MLA and planar diffractive-type MLA is still staying at the diffraction-limited scale. Here we propose and experimentally demonstrate a high numerical aperture (NA) supercritical lens (SCL) array which could achieve a sub-diffraction-limited focal spot lattice in the far field. The intensity distribution for all the focal spots has good uniformity with the lateral size around ${0.45}\lambda {\rm /NA}$0.45λ/NA (0.75X Airy unit). The elementary unit in the SCL array composes a series of concentric belts with a feature size in micrometer scale. By utilizing an ultrafast ultraviolet lithography technique, a centimeter scale SCL array could be successfully patterned within 10 mins. Our results may provide possibilities for the applications in optical nanofabrication, super-resolution imaging, and ultrafine optical manipulation.
ABSTRACT
The emerging metasurfaces with the exceptional capability of manipulating an arbitrary wavefront have revived the holography with unprecedented prospects. However, most of the reported metaholograms suffer from limited polarization controls for a restrained bandwidth in addition to their complicated meta-atom designs with spatially variant dimensions. Here, we demonstrate a new concept of vectorial holography based on diatomic metasurfaces consisting of metamolecules formed by two orthogonal meta-atoms. On the basis of a simply linear relationship between phase and polarization modulations with displacements and orientations of identical meta-atoms, active diffraction of multiple polarization states and reconstruction of holographic images are simultaneously achieved, which is robust against both incident angles and wavelengths. Leveraging this appealing feature, broadband vectorial holographic images with spatially varying polarization states and dual-way polarization switching functionalities have been demonstrated, suggesting a new route to achromatic diffractive elements, polarization optics, and ultrasecure anticounterfeiting.
ABSTRACT
In this Letter, all-optical generation of magnetization with arbitrary three-dimensional (3D) orientations is numerically demonstrated through the inverse Faraday effect (IFE) by using a reversing calculation method. The IFE-induced magnetization with an expected 3D orientation is initially conceived by coherently configuring two orthogonally arranged electric dipoles with a phase difference of π/2 in the focal region of a to-be-determined incident light field. Based on the dipole antenna theory, this required incident light field can be deduced analytically according to the orientations of the electric dipoles. By utilizing this field as illumination and reversing the field propagation, magnetization with the expected orientation can be obtained in the focal region through the IFE. Moreover, this method showcases a high magnetization orientation purity (greater than 93%) within the focal volume defined by the full width at half maximum when the numerical aperture of the focal lens is 0.95. This result demonstrates extended flexibility of magnetization manipulations in an all-optical fashion and possesses great potential in spintronics and all-optical magnetic recording.
ABSTRACT
In this Letter, we numerically demonstrate the all-optical generation of uniformly oriented in-plane magnetization with near-unity purity (more than 99%) under a 4π microscopic configuration. This is achieved through focusing two counter-propagating vector beams consisting of coherently configured linear and radial components. Based on the Debye diffraction theory, constructive and destructive interferences of the focal field components can be tailored under the 4π configuration to generate high-purity uniformly polarized transverse and longitudinal electric-field components in the center of the focal region. Consequently, near-unity purity in-plane magnetization with a uniform orientation within the focal volume defined by the full width at half-maximum can be created through the inverse Faraday effect. In addition, it reveals that the purity of the in-plane magnetization is robust against the numerical aperture of the focal lens. This result expands the flexibility of magnetization manipulations through light and holds great potential in all-optical magnetic recording and spintronics.
ABSTRACT
We report on the experimental demonstration of improved lateral resolution in stimulated emission depletion (STED) microscopy using an annular depletion beam configuration. A tight and finely tuned doughnut focal spot can be created by annular vortex illumination. Its application in STED microscopy for enhanced lateral resolution is systematically investigated by imaging 40 nm fluorescent beads. An improved resolution with more than 20% reduced effective point spread function of the imaging system determined by the full width at half-maximum compared to that of the conventional STED is achieved. The proposed scheme also demonstrates its resolving capability for biological samples. The principle holds great potential in the research fields of biological superresolution imaging as well as STED-based nanolithography and high-density optical data storage.
ABSTRACT
Three-dimensional (3D) micro/nano structures made of narrow electronic bandgap semiconductor materials have important applications in a wide range of disciplines. Direct laser writing (DLW) provides the unparalleled advantage to fabricate 3D arbitrary geometric structures at the micro and nano meter scale. The fabrication of 3D structures within bulk narrow electronic bandgap semiconductor materials by DLW is challenged for the top-down strategy due to their narrow bandgap and high refractive index. Here, we report on the bottom-up strategy for the fabrication of 3D micro/nano structures made from PbSe with an electronic bandgap as narrow as 0.27 eV and a refractive index as high as 4.82 in a solution.