A Nuclear-Localized Naphthalimide-Based Fluorescent Light-Up Probe for Selective Detection of Carbon Monoxide in Living Cells.

A nuclear-localized fluorescent light-up probe, NucFP-NO2, was designed and synthesized that can detect CO selectively in an aqueous buffer (pH 7.4, 37 °C) through the CO-mediated transformation of the nitro group into an amino-functionalized moiety. This probe triggered a more than 55-fold "turn-on" fluorescence response to CO without using any metal ions, e.g., Pd, Rh, Fe, etc. The enhanced response is highly selective over a variety of relevant reactive oxygen, nitrogen, and sulfur species and also various biologically important cationic, anionic, and neutral species. The detection limit of this probe for CO is as low as 0.18 µM with a linear range of 0-70 µM. Also, this fluorogenic probe is an efficient candidate for monitoring intracellular CO in living cells (RAW 264.7, A549 cells), and the fluorescence signals predominantly localize in the nuclear region.

A Lysosome-Targetable Fluorescence Sensor for Ultrasensitive Detection of Hg2+ in Living Cells and Real Samples.

A new lysosome-targetable fluorescence sensor, Lyso-HGP, was designed and synthesized based on 4-methyl-2,6-diformylphenol as a fluorophore. Lyso-HGP displays highly sensitive fluorescent detection of Hg2+ in HEPES buffer solution (10 mM, DMSO 1%) of pH 7.0 at 37 °C due to the formation of highly fluorescent formyl-functionalized derivative Lyso-HGP-CHO. The sensor triggered a "turn-on" fluorescence response to Hg2+ with a simultaneous increase of fluorescence intensity by 180-fold just after 10 min. The response is very selective over a variety of biologically relevant cations, anions, molecules, and competitive toxic heavy metal cations. The limit of detection (LOD) was calculated as low as 6.82 nM. So, it can be utilized to detect this toxic heavy metal in biology and environmental samples in an aqueous buffer medium. Also, the sensor is able to monitor the subcellular distribution of Hg2+ specifically localized in the lysosome's compartment in the MCF7 human breast cancer cell line by fluorescence microscopy.

A New Lysosome-Targetable Turn-On Fluorogenic Probe for Carbon Monoxide Imaging in Living Cells.

A lysosome-targetable fluorogenic probe, LysoFP-NO2, was designed and synthesized based on a naphthalimide fluorophore that can detect selectively carbon monoxide (CO) in HEPES buffer (pH 7.4, 37 °C) through the transformation of the nitro group into an amino-functionalized system in the presence of CO. LysoFP-NO2 triggered a "turn-on" fluorescence response to CO with a simultaneous increase of fluorescence intensity by more than 75 times. The response is selective over a variety of relevant reactive nitrogen, oxygen, and sulfur species. Also, the probe is an efficient candidate for monitoring changes in intracellular CO in living cells (MCF7), and the fluorescence signals specifically localize in the lysosome compartment.

Selective and sensitive turn-on chemosensor for arsenite ion at the ppb level in aqueous media applicable in cell staining.

A newly designed and structurally characterized cell permeable diformyl-p-cresol based receptor (HL) selectively senses the AsO3(3-) ion up to ca. 4.1 ppb in aqueous media over the other competitive ions at biological pH through an intermolecular H-bonding induced CHEF (chelation-enhanced fluorescence) process, established by detailed experimental and theoretical studies. This biofriendly probe is highly competent in recognizing the existence of AsO3(3-) ions in a living organism by developing an image under a fluorescence microscope and useful to estimate the amount of arsenite ions in various water samples.

A napthelene-pyrazol conjugate: Al(III) ion-selective blue shifting chemosensor applicable as biomarker in aqueous solution.

A newly synthesized and crystalographically characterized napthelene­pyrazol conjugate, 1-[(5-phenyl-1H-pyrazole-3-ylimino)-methyl]-naphthalen-2-ol (HL) behaves as an Al(III) ion-selective chemosensor through internal charge transfer (ICT)-chelation-enhanced fluorescence (CHEF) processes in 100 mM HEPES buffer (water­DMSO 5:1, v/v) at biological pH with almost no interference of other competitive ions. This mechanism is readily studied from electronic, fluorimetric and (1)H NMR titration. The probe (HL) behaved as a highly selective fluorescent sensor for Al(III) ions as low as 31.78 nM within a very short response time (15­20 s). The sensor (HL), which has no cytotoxicity, is also efficient in detecting the distribution of Al(III) ions in HeLa cells via image development under fluorescence microscope.

Effect of substituents on FRET in rhodamine based chemosensors selective for Hg2+ ions.

The effect of substituents on FRET in two newly designed rhodamine-based Hg(2+) ion selective chemosensors (L¹ and L²) has been explored by a systematic experimental and theoretical study. Comparison of these sensors in the analytical study and imaging of Hg(2+) ions in living cells has also been included.

Cell permeable fluorescent receptor for detection of H2PO4(-) in aqueous solvent.

A new colorimetric fluorescent receptor for H(2)PO(4)(-) is reported in this communication. The receptor can detect dihydrogen phosphates optically by developing a color change from yellow to green. Acute spectral responses to H(2)PO(4)(-) in HEPES buffer (DMSO-HEPES 1:9) have been observed. The selectivity zone in terms of pH of the receptor for H(2)PO(4)(-) is attributed to the fitness in the acidity (pK(a)) of receptor with H(2)PO(4)(-). Hydrogen bonding plays the key role here which is confirmed by (1)H NMR titration. The receptor also has good potential for bio-imaging. The mode of interaction has also been established by ab initio calculation.

A new fluorescent probe for sensing Al3+ ions in the solution phase and CH3COO- in the solid state with aggregation induced emission (AIE) activity.

An AIE (aggregation induced emission) active probe DFP-AMQ was designed and synthesized as a hexa-coordinated N2O donor chelator for the selective sensing of Al3+ colorimetrically as well as fluorimetrically with a 27-fold fluorescence enhancement for CH3CN-H2O (9 : 1, v/v, pH 7.2, HEPES buffer). The fluorescence enhancement occurred through the blocking of ESIPT, chelation enhanced fluorescence effect (CHEF) arose, and as a result fluorescence enhancement was observed through 1 : 1 complexation with Al3+ ions. Detailed spectroscopic studies including UV-Vis, FTIR, 1H NMR, and HRMS studies were carried out to characterize the probable structure of DFP-AMQ including the complexation of DFP-AMQ with Al3+ ions. The spectrophotometric and spectrofluorimetric titrations revealed strong binding towards Al3+ and the K d values were obtained from UV-Vis (3.26 × 10-5 M-1) and fluorescence titration (2.02 × 10-5 M-1). The limit of detection of Al3+ by DFP-AMQ was 1.11 µM. The quantum yields of DFP-AMQ and [DFP-AMQ-Al]+ were calculated to be 0.008 and 0.211, respectively. Dynamic light scattering (DLS) studies showed that the sizes of the particles increased with increasing water percentage due to aggregation. SEM (scanning electron microscopy) studies revealed interesting morphological changes in microstructures in which DFP-AMQ demonstrated a rod-like shape, which was converted to a spherical-like shape in the presence of Al3+ and when DFP-AMQ aggregated in H2O it showed aggregated block-like shape. In the solid phase, DFP-AMQ with nitrate has no particular shape, but in the presence of acetate, it converts to stone-like shape. This probe (DFP-AMQ) could be employed for on-site Al3+ ion detection in the solid state.

Combined Experimental and Theoretical Studies on the Rubbing-Induced Fluorescence Behavior of a Luminophore in the Solid State.

It is intricate to break and make chemical bonds in solid states compared to their solution states, so it is imperative to ascertain green proficient approaches by regulating the solid-state structures and their related material properties. Here, the rubbing-induced photoluminescence behavior of a luminophore (RIL) of the benzimidazole family in the solid state has been accomplished. Interestingly, upon gentle rubbing or mere scratching, solid-state fluorescence from the nonemissive pristine RIL was observed due to the aggregation-induced emission (AIE) phenomenon in the solid state, for which the phenolic moiety is present in the molecule and is accountable. The structure-property relationship of RIL and the mechanism responsible for this solid-state fluorescence characteristics have been explained with the help of experimental (using the single-crystal structure, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) images, etc.) and theoretical (by DFT and TDDFT) studies. The crystal arrangements with different stacking interactions and the SEM images after being rubbed revealed that the mechanical force- or pressure-induced slight deformation in the crystal arrangement notably facilitated the strong emission in the solid state. This rubbing-induced solid-state fluorescence in a new luminophore (RIL) through stacking of layers restricting the molecular motion has been developed here for the first time, and it can be explicitly employed in steganography techniques for data security. This present study will open up a new insight into the use of this RIL as a solid-state smart material for data security in coding devices in the future, and this developed approach may be helpful to ameliorate the design of new-generation smart materials by modifying the structure to attain other characteristics.

A ratiometric fluorescent chemosensor for iron: discrimination of Fe2+ and Fe3+ and living cell application.

A newly designed probe, 6-thiophen-2-yl-5,6-dihydrobenzo[4,5]imidazo-[1,2-c] quinazoline (HL(1)) behaves as a highly selective ratiometric fluorescent sensor for Fe(2+) at pH 4.0-5.0 and Fe(3+) at pH 6.5-8.0 in acetonitrile-HEPES buffer (1/4) (v/v) medium. A decrease in fluorescence at 412 nm and increase in fluorescence at 472 nm with an isoemissive point at 436 nm with the addition of Fe(2+) salt solution is due to the formation of mononuclear Fe(2+) complex [Fe(II)(HL)(ClO(4))(2)(CH(3)CN)(2)] (1) in acetonitrile-HEPES buffer (100 mM, 1/4, v/v) at pH 4.5 and a decrease in fluorescence at 412 nm and increase in fluorescence at 482 nm with an isoemissive point at 445 nm during titration by Fe(3+) salt due to the formation of binary Fe(3+) complex, [Fe(III)(L)(2)(ClO(4))(H(2)O)] (2) with co-solvent at biological pH 7.4 have been established. Binding constants (K(a)) in the solution state were calculated to be 3.88 × 10(5) M(-1) for Fe(2+) and 0.21 × 10(3) M(-1/2) for Fe(3+) and ratiometric detection limits for Fe(2+) and Fe(3+) were found to be 2.0 µM and 3.5 µM, respectively. The probe is a "naked eye" chemosensor for two states of iron. Theoretical calculations were studied to establish the configurations of probe-iron complexes. The sensor is efficient for detecting Fe(3+)in vitro by developing a good image of the biological organelles.

A water soluble Al3+ selective colorimetric and fluorescent turn-on chemosensor and its application in living cell imaging.

An efficient water soluble fluorescent Al(3+) receptor, 1-[[(2-furanylmethyl)imino]methyl]-2-naphthol (1-H) was synthesized and characterized by physico-chemical and spectroscopic tools along with single crystal X-ray crystallography. High selectivity and affinity of 1-H towards Al(3+) in HEPES buffer (DMSO/water: 1/100) of pH 7.4 at 25 °C showed it to be suitable for detection of intracellular Al(3+) by fluorescence microscopy. Metal ions, viz. alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)), and transition-metal ions (Ni(2+), Zn(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Cr(3+/6+), Hg(2+)) and Pb(2+), Ag(+) did not interfere. The lowest detection limit for Al(3+) was calculated to be 6.03 × 10(-7) M in 100 mM HEPES buffer (DMSO/water: 1/100). Theoretical calculations have also been included in support of the configuration of the probe-aluminium complex.

A new metal-free benzorhodol-based photoluminophore selective for carbon monoxide detection applicable in both in vitro and in vivo bioimaging.

A new benzorhodol-based non-fluorescent organic frame (DEB-CO) detects carbon monoxide (CO) selectively through a spirolactam ring-opening mechanism. Herein, the selective off-on fluorogenic behavior of this probe towards CO has been achieved without any assistance of precious and hazardous metals (e.g. Pd2+) as additional substrates. Moreover, the red-emissive probe motivated us to apply in situ tracing in mice and living cells. The selective off-on fluorogenic behavior of this probe towards CO originating from CORM-3 in vitro and in vivo with a limit of detection as low as 64.29 nM (for CORM-3) has been observed. Additionally, this probe is capable of sensing toxic carbon monoxide gas. This probe has also been utilized to detect intracellular CO in MCF7 cells (in vitro) and to spot the distribution of CO in mice (in vivo) by acquiring bioimages with the help of confocal microscopy, which indicates that DEB-CO is a smart competent probe for this purpose.

Development of a highly selective cell-permeable ratiometric fluorescent chemosensor for oxorhenium(V) ion.

A novel 6-(2-pyridinyl)-5,6-dihydrobenzimidazo[1,2-c]quinazoline (HL) serves as a first-time highly selective and sensitive ratiometric fluorescent chemosensor probe for oxorhenium (ReO(V)) ion in acetonitrile : water = 9 : 1 (v/v) at 25 °C. The decrease in fluorescence at 410 nm and increase in fluorescence at 478 nm with an isoemissive point at 444 nm in the presence of ReO(V) ion is accounted for by the formation of mononuclear [ReOL(2)Cl] complex, characterized by physico-chemical and spectroscopic tools. The fluorescence quantum yield of the chemosensor (HL) was only 0.198 at 410 nm, and it increased more than 3-fold in the presence of 2 equiv. of the ReO(V) ion at 478 nm. Interestingly, the introduction of other metal ions and relevant anions caused the fluorescence intensity at 478 nm to be either unchanged or weakened. The fluorescence-response fits a Hill coefficient of 2.088 indicates the formation of a 1 : 2 stoichiometry for the L-ReO(V) complex. In the concentration range of 0-20 µM of oxorhenium(V) species calibration graph was linear with correlation coefficient (R) of 0.99994 and the calibration sensitivity was found to be 4.0 × 10(-7) M. The cellular image in the confocal microscope clearly indicated the presence of ReO(V) in Candida albicans cells using this chemosensor (HL).

A highly selective fluorescent chemosensor for zinc ion and imaging application in living cells.

A new 2,6-bis(5,6-dihydrobenzo[4,5]imidazo[1,2-c]quinazolin-6-yl)-4-methylphenol (1) serves as a highly selective and sensitive fluorescent probe for Zn(2+) in a HEPES buffer (50 mM, DMSO:water = 1:9 (v/v), pH = 7.2) at 25 °C. The increase in fluorescence in the presence of Zn(2+) is accounted for by the formation of dinuclear Zn(2+) complex [Zn(2)(C(35)H(25)N(6)O)(OH)(NO(3))(2)(H(2)O)] (2), characterized by X-ray crystallography. The fluorescence quantum yield of the chemosensor 1 is only 0.019, and it increases more than 12-fold (0.237) in the presence of 2 equiv of the zinc ion. Interestingly, the introduction of other metal ions causes the fluorescence intensity to be either unchanged or weakened. By incubation of cultured living cells (A375 and HT-29) with the chemosensor 1, intracellular Zn(2+) concentrations could be monitored through selective fluorescence chemosensing.

A deoxygenation-switch-based red-emitting fluorogenic light-up probe for the detection of highly toxic free bilirubin in human blood serum.

Reaction-based chemical switches are attracting great interest due to their high selectivity, and their use has become a powerful technique for developing fluorogenic probes. Herein, a benzorhodol-derivative-attached N-oxide probe (DEBNox) has been designed as a new fluorogenic probe for the detection of the biologically toxic species bilirubin based on a deoxygenation switching mechanism. Upon reaction with added Fe3+, bilirubin produces Fe2+ ions in situ, which in turn promote a deoxygenation reaction with DEBNox to generate the corresponding high-red-fluorescence (λem: ∼623 nm) benzorhodol derivative (DEB). This type of Fe3+-mediated response helps the probe to act as a qualified turn on selective fluorescence sensor for bilirubin with a detection range as low as 33 nM. Moreover, the probe was successfully employed to detect free bilirubin in human blood serum specimens with acceptable accuracy and reliability. This DEBNox-based light-up strategy also facilitates the construction of reliable and highly sensitive assays based on a paper-based strategy, similar to pH-indicator paper, as is demonstrated here via bilirubin detection in real serum samples. These findings could be useful for developing powerful diagnostic tools for the detection of free bilirubin in the near further.

Encapsulation and Stabilization of a Donor-Acceptor Stenhouse Adduct Isomer in Water Inside the Blue Box: A Combined Experimental and Theoretical Approach.

We synthesized two types of donor-acceptor Stenhouse adducts (DASAs), a new type of photochromic molecules showing dual color in two different isomeric forms in solution phase, using Meldrum acid (DASA-Mel) and barbituric acid (DASA-Bar), along with a naphthalimide derivative to obtain interesting fluorescence properties. DASA-Mel was found to have fast photochromic conversion in comparison to DASA-Bar, evident from ultraviolet-visible (UV-vis) and fluorescence spectroscopic studies. The colored form of DASA-Mel was encapsulated inside the water-soluble Stoddart's blue box and became soluble in water much faster than DASA-Bar. Interestingly, the competitive encapsulation experiment showed that DASA-Mel was selectively encapsulated inside the blue box in water whereas DASA-Bar was mostly separated out from the solution after centrifugation, and this phenomenon was confirmed by 1H and DOSY NMR and mass spectroscopies. Moreover, we found through density functional theory (DFT) optimization that the open form of DASA-Mel was more stable during the encapsulation reaction in a water medium in comparison to DASA-Bar. The calculated binding energies of encapsulated DASA-Mel and DASA-Bar are -10.2 and -9.9 kcal/mol, respectively, clearly showing that the former is more stable by 0.3 kcal. Consequently, the organic macrocycle selectively separating one kind of DASA from a mixture by encapsulation in water is reported for the first time with experimental and theoretical support in the literature.

Recent Advances in Fluorescence Light-Up Endogenous and Exogenous Carbon Monoxide Detection in Biology.

Considerable attention has been paid by the scientific community to detect toxic carbon monoxide (CO) in sub-cellular organelles like mitochondria, lysosomes, nuclei, etc. due to their generation and accumulation through numerous biological processes and their role as signal transducer, therapeutics, etc. Various methods are also available for detection of CO, but fluorescence light-up detection is considered the best due to its easy and accurate sensing capability. As of now, no review is available in the literature dedicated to fluorescent detection of only CO both in vitro and in vivo, but considering the huge amount of work reporting every year, it is necessary to have an account of all the recent significant works devoted to it. This review will give special attention to the most noteworthy development of fluorescent light-up probes for the detection of cellular and sub-cellular targetable CO starting from 2012 and emphasizing also the mechanism of action and the applications.

A new half-condensed Schiff base platform: structures and sensing of Zn2+ and H2PO4- ions in an aqueous medium.

A newly designed and synthesized half-condensed organic moiety 2-hydroxy-5-methyl-3-[(2-phenylamino-phenylimino)-methyl]-benzaldehyde (HL') and a Zn2L4 complex sequentially detect Zn2+ and H2PO4- ions as low as 1.13 nM and1.23 µM, respectively. HL' and a dinuclear Zn(ii) complex of in situ generated L- in a solution formulated as Zn2L4 under investigation were characterized by physicochemical and spectroscopic studies along with detailed structural analyses by single-crystal X-ray crystallography. The selectivity and sensitivity of HL' towards Zn2+ ions and of the Zn2L4 complex towards H2PO4- ions are based on CHEF and via displacement pathways, respectively. Dual sensing of Zn2+ ions and H2PO4-ions in an aqueous medium via "Green-Blue-Green" emission with the reversible transformation of in situ formed HL' to HL was established by detailed electronic absorption and emission spectroscopic studies. This non-cytotoxic probe (HL', i.e. produced HL in solution) and Zn2L4 complexes are able to monitor the subcellular distribution changes of Zn2+ and H2PO4- ions, respectively, by fluorescence microscopy using the human semen sample.

Bilirubin Quantification in Human Blood Serum by Deoxygenation Reaction Switch-Triggered Fluorescent Probe.

A coumarin-based fluorescent compound, bilirubin fluorescent probe N-oxide (BFPNox), was successfully designed and synthesized for highly selective and sensitive detection of free bilirubin with short response time. The fluorescence "turn-on" response of the probe is based on the in situ generated Fe2+-mediated deoxygenation reaction of N-oxide from the diethylarylamine group of the probe, where the group attached to the coumarin π-conjugated system is responsible for the fluorescence quenching state of the probe, BFPNox. Here, the reaction of the added Fe3+ ions with bilirubin produces Fe2+ ions in situ in aqueous buffer. Fluorescence enhancement of BFPNox was achieved by more than 12-fold when a double equivalent of bilirubin solution was added in reaction buffer at pH 7.2 (50 mM HEPES, 5% DMSO) at 25 °C under excitation at 400 nm. It detected free bilirubin as low as 76 nM in an aqueous system without any interference of metal ions, anions, and other important biomolecules with a linear concentration range of 0-10 µM (R2 = 0.991). The probe was also employed in the estimation of free bilirubin in human serum specimens to verify the efficacy of this probe. With these, it is revealed that this probe is a good candidate to be used as a powerful diagnostic tool for the assessment of free bilirubin with significant accuracy and reliability.

Study on size dependent ion exchange property of nanosilica as green inorganic exchanger in radiochemical separation.

Silica nanoparticles (SiNPs) of different sizes were synthesized using different concentration of precursor material tetraethylorthosilicate (TEOS). The structural and morphological details of the material were obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The SEM study was followed by energy dispersive spectroscopic analysis (EDS) for elemental analysis of the sample. The particle sizes were determined by dynamic light scattering (DLS) method. Ion exchange capacity was measured for different metal ions with sizes of the SiNPs and size-dependent ion exchange property of the material was investigated thoroughly. The nanomaterial of the smallest size of around 13.54 nm was used to separate carrier-free 90Y from 90Sr in column chromatographic technique using 1% aqueous EDTA as eluting agent at pH 6.