ABSTRACT
The catalytic chemosensing assay (CCA), a new indicator displacement assay, was developed for selective detection of methomyl, a highly toxic pesticide. Trimetallic complex {[FeII (dmbpy)(CN)4 ]-[PtII (DMSO)Cl]2 -[RuII (bpy)2 (CN)2 ]} (1; dmbpy=4,4'-dimethyl-2,2'-bipyridine, bpy=2,2'-bipyridine) was synthesized as a task-specific catalyst to initially reduce and degrade methomyl to CH3 SH/CH3 NH2 /CH3 CN/CO2 . The thus-produced CH3 SH interacts with the trimetallic complex to displace the cis-[RuII (bpy)2 (CN)2 ] luminophore for monitoring. Other pesticides, including organophosphates and similar carbamate pesticides, remained intact under the same catalytic conditions; a selective sensing signal is only activated when 1 recognizes methomyl. Furthermore, 1 can be applied to detect methomyl in real water samples. In the luminescent mode of the assay, the method detection limit (MDL) of 1 for methomyl (LD50 =17â mg kg-1 ) was 1.12â mg L-1 .
ABSTRACT
Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [RuII (bpy)2 (CN)2 ]2 (CuI I)2 (bpy=2,2'-bipyridine), is described. This complex integrates a task-specific catalyst (CuI -catalyst) and a signaling unit ([RuII (bpy)2 (CN)2 ]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λmax =400â nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [RuII (bpy)2 (CN)2 ], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.
Subject(s)
Copper/chemistry , Methyl Parathion/analysis , Organometallic Compounds/chemistry , Pesticides/analysis , Water Pollutants, Chemical/analysis , Catalysis , Colorimetry/methods , Coordination Complexes/chemistry , Fluorometry/methods , Hydrolysis , Models, Molecular , Nitrophenols/chemistry , Organothiophosphates/chemistry , Spectrophotometry, Ultraviolet/methods , Water/analysisABSTRACT
We aim to develop novel photoresponsive surface molecularly imprinted polymer (SIMP) microspheres, an SiO2 -SIMP, for the photocontrolled extraction of uric acid from biological samples. The SiO2 -SMIP was prepared on silica microspheres by surface polymerization and characterized by using scanning electron microscopy, transmission electron microscopy, FTIR spectroscopy, thermogravimetric analysis, nitrogen adsorption-desorption analysis, and UV-visible spectroscopy. The SiO2 -SMIP microspheres showed a photocontrolled uptake and release of uric acid in NaH2 PO4 buffer upon alternate irradiation at 365 and 440 nm. The SiO2 -SMIP microspheres were able to photocontrollably extract uric acid from complicated biological samples for concentration analysis with no significant interference encountered and it exhibited very good recognition ability and fast binding kinetics toward uric acid.
Subject(s)
Microspheres , Molecular Imprinting , Uric Acid/isolation & purification , Adsorption , Humans , Polymers , Silicon Dioxide , Uric Acid/urineABSTRACT
This study aimed to develop a photoresponsive molecularly imprinted hydrogel (MIH) casting membrane for the determination of trace tetracycline (TC) in milk. This MIH casting membrane combined the specificity of MIHs, the photoresponsive properties of azobenzene, and the portable properties of a membrane. Photoresponsive TC-imprinted MIHs were initially fabricated and then cast on sodium dodecyl sulfonate polyacrylamide gel. After TC removal, a photoresponsive MIH casting membrane was obtained. The photoresponsive properties of the MIH casting membrane were robust, and no obvious photodegradation was observed after 20 cycles. The MIH casting membrane displayed specific affinity to TC upon alternate irradiation at 365 and 440 nm; it could quantitatively uptake and release TC. The TC concentration (0.0-2.0 × 10(-4) mol l(-1)) in aqueous solution displayed a linear relationship with the photoisomerization rate constant of azobenzene within the MIH casting membrane. As such, a quick detection method for trace TC in aqueous foodstuff samples was established. The recovery of this method for TC in milk was investigated with a simple pretreatment of milk, and a high recovery of 100.54-106.35% was obtained. Therefore, the fabricated membrane can be used as a portable molecular sensor that can be easily recycled.
Subject(s)
Anti-Bacterial Agents/analysis , Hydrogels/chemistry , Milk/chemistry , Tetracycline/analysis , Animals , Membranes, Artificial , Molecular Imprinting , Molecular Structure , Photochemical ProcessesABSTRACT
Plastic waste is a valuable organic resource. However, proper technologies to recover usable materials from plastic are still very rare. Although the conversion/cracking/degradation of certain plastics into chemicals has drawn much attention, effective and selective cracking of the major waste plastic polyethylene is extremely difficult, with degradation of C-C/C-H bonds identified as the bottleneck. Pyrolysis, for example, is a nonselective degradation method used to crack plastics, but it requires a very high energy input. To solve the current plastic pollution crisis, more effective technologies are needed for converting plastic waste into useful substances that can be fed into the energy cycle or used to produce fine chemicals for industry. In this study, we demonstrate a new and effective chemical approach by using the Fenton reaction to convert polyethylene plastic waste into carboxylic acids under ambient conditions. Understanding the fundamentals of this new chemical process provides a possible protocol to solve global plastic-waste problems.
ABSTRACT
Detection of mercapto-containing pesticides plays a crucial role in food and water safety. A new Re(I)-NCS-Pt(II) complex, [Re(4,4'-di-tert-butyl-2,2'-bipyridine)(CO)3(NCS)]-[Pt(DMSO)(Cl)2] (1), was synthesized and characterized. The synthetic procedure, characterization results, and photophysical data for 1 are reported in this paper. Solvated complex 1 demonstrated luminescent chemodosimetric selectivity for phorate, demeton, and aldicarb (three common mercapto-containing pesticides) with method detection limits (MDLs) of 1.00, 2.87, and 2.08 ppm, respectively. The binding constants (log K) of 1 toward them were in the 3.24-3.44 range. The analyte selectivity of the complex was found to be dependent on the bridging linkage (C≡N and NâCâS) between the Re(I) and Pt(II) centers. The solid-supported dosimetric device 1 was fabricated by blending complex 1 with Al2O3 and poly(vinyl chloride) (PVC) powder. The MDLs of the device toward the mercapto-containing pesticides were 0.48-0.60 ppm. The device was applicable to pesticides in real water bodies such as taps, rivers, lakes, and underground water bodies with excellent recoveries and relative standard deviations of 76.2-108.0% and 2.9-6.7%, respectively. Its spectrofluorimetric changes could be analyzed by naked eye within 20 min with a linear luminometric response toward increases in the phorate concentration (0-8.0 ppm) with R = 0.999.
ABSTRACT
A new bimetallic Fe(II) -Cu(II) complex was synthesized, characterized, and applied as a selective and sensitive sensor for cyanide detection in water. This complex is the first multifunctional device that can simultaneously detect cyanide ions in real water samples, amplify the colorimetric signal upon detection for naked-eye recognition at the parts-per-million (ppb) level, and convert the toxic cyanide ion into the much safer cyanate ion in situ. The mechanism of the bimetallic complex for high-selectivity recognition and signaling toward cyanide ions was investigated through a series of binding kinetics of the complex with different analytes, including CN(-) , SO4 (2-) , HCO3 (-) , HPO4 (2-) , N3 (-) , CH3 COO(-) , NCS(-) , NO3 (-) , and Cl(-) ions. In addition, the use of the indicator/catalyst displacement assay (ICDA) is demonstrated in the present system in which one metal center acts as a receptor and inhibitor and is bridged to another metal center that is responsible for signal transduction and catalysis, thus showing a versatile approach to the design of new multifunctional devices.
ABSTRACT
Detection of neutral biogenic sulfides plays a crucial role in food safety. A new heterobimetallic Re(I)-Pt(II) donor-acceptor complex--[Re(biq)(CO)3(CN)]-[Pt(DMSO)(Cl)2] (1, biq = 2,2'-biquinoline)--was synthesized and characterized. The X-ray crystallographic and photophysical data for 1 are reported in this study. Complex 1 indicated the luminescent chemodosimetric selectivity for dimethyl sulfide, which persisted even in the presence of a variety of interfering vapors, with a detection limit as low as 0.96 ppm. The binding constant (log K) of 1 toward dimethyl sulfide was 3.63 ± 0.03. The analyte selectivity of the complexes was found to be dependent on the ligand coordinated to the Re(I) center. Real samples (beef, chicken, and pork) were monitored real-time for gaseous dimethyl sulfide. Complex 1 shows a linear spectrofluorimetric response with increasing storage time of the meats at 30 °C.
Subject(s)
Coordination Complexes/chemistry , Hazard Analysis and Critical Control Points/methods , Luminescent Agents/chemistry , Meat/analysis , Platinum/chemistry , Rhenium/chemistry , Sulfides/analysis , Animals , Cattle , Chickens , Coordination Complexes/chemical synthesis , Crystallography, X-Ray , Limit of Detection , Luminescent Agents/chemical synthesis , Luminescent Measurements/methods , Quinolines/chemical synthesis , Quinolines/chemistry , SwineABSTRACT
A tetranuclear bimetallic complex, [Ru(II)((t)Bubpy)(CN)4]2-[Fe(III)(H2O)3Cl]2·8H2O (1) has been synthesized and characterized. It was found to be a multifunctional device that can detect, signal amplify, and degrade an organic pollutant, oxalate. Results of the chemosensing studies of 1 toward common anions show that only oxalate selectively induces naked-eye colorimetric and luminometric responses with method detection limits down to 78.7 and 5.5 ppm, respectively from 1. Meanwhile, results of the photo-degradation studies of 1 toward oxalate show that the dissolved organic carbon content of oxalate decreased and reached complete mineralization into CO2 within 6 hours. Complex 1 was also found as the catalyst that amplified the detection signal toward oxalate. Through the photoassisted Fenton reaction by 1, methyl orange, an additional coloring agent, could be degraded so that the visual detection limit of 1 toward oxalate was magnified 50 times from 100 to 2 ppm. The detection, degradation, mineralization and signal amplification were found applicable in real water bodies such as river, pond and underground water with excellent recoveries and relative standard deviation.
ABSTRACT
The detection of neutral biogenic amines plays a crucial role in food safety. Three new heterobimetallic Ru(II)-Ln(III) donor-acceptor complexes, KPrRu, KNdRu, and KSmRu, K{[Ru((II))((t)Bubpy)(CN)4]2-Ln((III))(H2O)4} (where (t)Bubpy = 4,4'-di-tert-butyl-2,2'-bipyridine), have been synthesized and characterized. Their photophysical and X-ray crystallographic data were reported in this study. These complexes were found to be selective for biogenic amine vapors, such as histamine, putrescine, and spermidine, with a detection limit down to the ppb level. The sensitivities of these complexes to the amines were recorded as ~log K = 3.6-5.0. Submicron rods of the complexes, with a nanoscale diameter and microscale length, were obtained through a simple precipitation process. Free-standing polymeric films with different degrees of porosity were fabricated by blending the submicron rods with polystyrene polymer. The polymer with the highest level of porosity exhibited the strongest luminescence enhancement after amine exposure. Real time monitoring of gaseous biogenic amines was applied to real fish samples (Atlantic mackerel) by studying the spectrofluorimetric responses of the Ru(II)-Ln(III) blended polymer film.
Subject(s)
Biogenic Amines/analysis , Drug Design , Film Dosimetry/methods , Lanthanoid Series Elements/chemistry , Odorants/analysis , Ruthenium/chemistry , Animals , Crystallography, X-Ray , PerciformesABSTRACT
Adenine is an important bio-molecule that plays many crucial roles in food safety and biomedical diagnostics. Differentiating adenine from a mixture of adenosine and other nucleic bases (guanine, thymine, cytosine, and uracil) is particularly important for both biological and clinical applications. A neutral Zn(II) metallosupramolecular polymer based on acyl hydrazone derived coordination centres (P1) were generated through self-assembly polymerization. It is a linear coordination polymer that behaves like self-standing film. The synthesis, (1)H-NMR characterization, and spectroscopic properties of this supramolecular material are reported. P1 was found to be a chemosensor specific to adenine, with a luminescent enhancement. The binding properties of P1 with common nucleic bases and nucleosides reveal that this supramolecular polymer is very selective to adenine molecules (~20 to 420 times more selectivity than other nucleic bases). The formation constant (K) of P1 to adenine was found to be log K = 4.10 ± 0.02. This polymeric chemosensor produces a specific response to adenine down to 90 ppb. Spectrofluorimetric and (1)H-NMR titration studies showed that the P1 polymer allows each Zn(II) coordination centre to bind to two adenine molecules through hydrogen bonding with their imine and hydrazone protons.
Subject(s)
Adenine/analysis , Chemistry Techniques, Analytical/instrumentation , Drug Design , Organometallic Compounds/chemistry , Organometallic Compounds/chemical synthesis , Polymers/chemistry , Zinc/chemistry , Chemistry Techniques, Synthetic , Dimethyl Sulfoxide/chemistry , Hydrazones/chemistry , Limit of Detection , Luminescent Agents/chemical synthesis , Luminescent Agents/chemistry , ProtonsABSTRACT
The oxidative catalytic halogenations of the C(sp3)-H bond of alkanes promoted by FeIII(acacen)Cl (1III-Cl) and FeIII(acacen)Br (1III-Br) in the presence of trifluoroacetic acid (TFA) were investigated. Four major steps were involved: (i) formation of [FeV(acacen)(oxo)X] species (X = Cl or Br), (ii) hydrogen-atom transfer, (iii) halogen atom rebound, and (iv) regeneration of 1III-Cl or 1III-Br. TFA played a significant role in (i) forming the high-valent iron-oxo intermediate and (ii) generating the reaction selectivity.
Subject(s)
Halogenation , Iron , Alkanes , Halogens , Hydrogen/chemistry , Iron/chemistry , Trifluoroacetic AcidABSTRACT
Gaseous biogenic amines such as putrescine, spermidine, aniline, and trimethylamine are important biomolecules that play many crucial roles in metabolism and medical diagnostics. A chemodosimetric detection assay has been developed for those gaseous amines by Ru(II)-Eu(III) heterobimetallic complexes, K{[Ru(II)((t)Bubpy)(CN)(4)](2)Eu(III)(H(2)O)(4)} (where (t)Bubpy = 4,4'-di-tert-butyl-2,2'-bipyridine). Synthesis, X-ray crystal characterization, and spectroscopic properties of this Ru(II)-Eu(III) heterobimetallic complex were reported. Binding properties of the Ru(II)-Eu(III) complex with common gases revealed that this complex is very selective to gaseous amine molecules. Sensitivity of this complex toward the amines was found as â¼log k() = 4.5-4.8. Real time monitoring of gaseous biogenic amines was applied to real fish samples (Atlantic mackerel) by studying the spectrofluorimetric responses of the Ru(II)-Eu(III) complex toward different biogenic amine concentration. GC/MS studies were also used as a reference for the studies. A linear spectrofluorimetric response was found toward biogenic amine concentration in real fish samples. This complex was found to respond specifically to those biogenic amines down to 10 ppb.
Subject(s)
Biogenic Amines/analysis , Chemistry Techniques, Analytical/instrumentation , Europium/chemistry , Fishes , Odorants/analysis , Organometallic Compounds/chemistry , Ruthenium/chemistry , Absorption , Animals , Electrons , Gases/chemistry , Luminescent Measurements , Models, Molecular , Molecular Conformation , Organometallic Compounds/chemical synthesis , Substrate Specificity , VolatilizationABSTRACT
A new mechanochemical method was developed to convert polymer wastes, polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), to fuel gases (H2, CH4, and CO) under ball-milling with KMnO4 at room temperature. By using various solid-state characterizations (XPS, SEM, EDS, FTIR, and NMR), and density functional theory calculations, it was found that the activation followed the hydrogen atom transfer (HAT) mechanism. Two metal oxidant molecules were found to abstract two separate hydrogen atoms from the α-CH and ß-CH units of substrates, [-ßCH2-αCH(R)-]n, where R = H in PE, R = γCH3 in PP, and R = Cl in PVC, resulting in a di-radical, [-ßCHâ¢-αCâ¢(R)-]. Subsequently, the two unpaired electrons of the di-radical were recombined into an alkene intermediate, [-ßCH = αC(R)-], which underwent further oxidation to produce H2, CH4, and CO gases.
ABSTRACT
A visible-light-responsive azobenzene derivative, 3,5-dichloro-4-((2,6-dichloro-4-(methacryloyloxy)phenyl)diazenyl)benzoic acid, was synthesized and used as the functional monomer to fabricate a visible-light-responsive core-shell structured surface molecularly imprinted polymer (PS-co-PMAA@VSMIP). After removal of the sacrificial PS-co-PMAA core, a hollow structured surface molecularly imprinted polymer (HVSMIP) was obtained. Both the PS-co-PMAA@VSMIP and HVSMIP were used for the detection of chlorpyrifos, a moderately toxic organophosphate pesticide. They exhibited good visible-light-responsive properties (550 nm for transâcis and 440 nm for cisâtrans isomerization for an azobenzene chromophore) in ethanol/water (9:1, v/v). Compared with the PS-co-PMAA@VSMIP, the HVSMIP had a larger surface area, pore volume, binding capacity, imprinting effect, maximum chemical binding capacity, dissociation constant, and photo-isomerization rate. The HVSMIP was applied to detect trace chlorpyrifos in fruit and vegetable samples. This was achieved by measuring the transâcis rate constant of the HVSMIP in the sample solution, with good recoveries, low relative standard deviations, and a low detection limit.
Subject(s)
Chlorpyrifos/analysis , Food Analysis/methods , Food Contamination/analysis , Fruit/chemistry , Light , Molecularly Imprinted Polymers/chemistry , Vegetables/chemistry , Molecularly Imprinted Polymers/chemical synthesis , Water/chemistryABSTRACT
A colorimetric probe based on gold nanoparticles (AuNPs) which is sensitive to two important volatile biogenic markers, i.e., dimethyl sulfide and histamine, is developed to monitor the spoilage of raw meat, fish, crustaceans, and preserved meat. The colorimetric detection is attributed to the transformation of the non-aggregated form of AuNPs to its aggregated form upon binding of the biomarkers. The AuNPs enable the detection of dimethyl sulfide and histamine at limits of 0.5 and 0.035 µg/mL, respectively. Furthermore, the probe exhibits excellent selectivity for those markers in the presence of other volatiles commonly generated by spoiled real meat and seafood. A sequential and positive causative relationship is exhibited among the storage period, the total bacteria count, the DMS evolved, and the chemosensing signal generated. Thus, this probe serves as a nondestructive and cost-effective detector for the real-time monitoring of meat spoilage.
Subject(s)
Biogenic Amines/analysis , Colorimetry/methods , Gold/chemistry , Meat/analysis , Metal Nanoparticles/chemistry , Sulfides/analysis , Animals , Color , Colorimetry/instrumentation , Crustacea/chemistry , Fishes , Food Analysis , Histamine/analysis , Meat Products/analysis , Seafood/analysisABSTRACT
As a moderately toxic organophosphorus pesticide, profenofos (PFF) is widely used in agricultural practice, resulting in the accumulation of a high amount of PFF in agricultural products and the environment. This will inevitably damage our health. Therefore, it is important to establish a convenient and sensitive method for the detection of PFF. This paper reports a photoresponsive surface-imprinted polymer based on poly(styrene-co-methyl acrylic acid) (PS-co-PMAA@PSMIPs) for the detection of PFF by using carboxyl-capped polystyrene microspheres (PS-co-PMAA), PFF, 4-((4-(methacryloyloxy)phenyl)diazenyl) benzoic acid, and triethanolamine trimethacrylate as the substrate, template, functional monomer, and cross-linker, respectively. PS-co-PMAA@PSMIP shows good photoresponsive properties in DMSO/H2O (3:1, v/v). Its photoisomerization rate constant exhibits a good linear relationship with PFF concentration in the range of 0~15 µmol/L. PS-co-PMAA@PSMIP was applied for the determination of PFF in spiked tomato and mangosteen with good recoveries ranging in 94.4-102.4%.
ABSTRACT
The application of photoresponsive surface molecularly imprinted polymers based on azobenzene is limited by the UV light source required and their poor water solubility. Reducing the phototoxicity and solvent toxicity of the polymers therefore presents a challenge. In this work, an NIR-light-responsive surface molecularly imprinted polymer was fabricated by atom transfer radical polymerization using up-conversion nanoparticles as the core, a hydrophilic green-light-responsive azobenzene derivative as the functional monomer, and a drug as the template. The up-conversion nanoparticles core emitted green fluorescence in the range of 520-550â¯nm upon NIR irradiation (980â¯nm, 5â¯Wâ¯cm-2), which was absorbed by the azobenzene containing molecularly imprinted polymers layer on the up-conversion nanoparticles surface. This caused the azobenzene chromophores to undergo transâcis isomerization in phosphate buffered solution (pHâ¯=â¯7.4), thus resulting in NIR-light-induced drug release. The up-conversion fluorescence spectra were used to study the interaction mechanism between the azobenzene monomer and NIR light. Compared with structural analogues of the template (antifebrin and phenacetin), the NIR-light-responsive surface molecularly imprinted polymer showed excellent specificity of recognition for the template drug (paracetamol). The maximum adsorption capacity of the NIR-light-responsive surface molecularly imprinted polymer for loading of paracetamol was 16.80⯵molâ¯g-1. The NIR-light-responsive surface molecularly imprinted polymer was applied for NIR-light-induced paracetamol release in phosphate buffered solution (pHâ¯=â¯7.4) through porcine tissue. This work demonstrates the potential of drug delivery systems based on molecularly imprinted polymers for application in deep tissue delivery.
Subject(s)
Molecular Imprinting/methods , Polymers/chemistry , Animals , Azo Compounds/chemistry , Cell Line, Tumor , Drug Liberation , Humans , Hydrophobic and Hydrophilic Interactions , Kinetics , Microscopy, Electrochemical, Scanning , Polymerization , SwineABSTRACT
Technologies for monitoring meat spoilage are important to ensuring consumer safety. As dimethyl sulfide (DMS) is a reliable marker for meat freshness, sensitive and selective DMS sensors are of great interest. Herein, two trinuclear cyano-bridged bimetallic donor-acceptor ensembles, FeII(bpy)2(CN)2-[PtII(DMSO)Cl2]2 (1) and FeII(bpy)2(CN)2-[AuICl]2, were synthesized, and corresponding solid-supported sensors were fabricated to determine the effect of the acceptor metal (MA) on DMS detection. Changing MA from AuI to PtII improved the sensitivity and selectivity owing to changes in the relative thermodynamic stabilities of the complex and MA-DMS adduct. When applied to real meat samples, 1 exhibited a linear spectroscopic response to DMS, even in the presence of interfering compounds, with a method detection limit of 1.0â¯ppm. The total bacteria count and gas chromatography-mass spectrometry results revealed that the spectroscopic signal generated by 1 correlated with the microbial growth level and DMS concentration during meat spoilage.
Subject(s)
Coordination Complexes/chemistry , Food Analysis/methods , Meat/analysis , Sulfides/analysis , Coordination Complexes/chemical synthesis , Food Analysis/instrumentation , Food Microbiology , Gold/chemistry , Limit of Detection , Meat/microbiology , Platinum/chemistry , Sensitivity and Specificity , Volatile Organic Compounds/analysisABSTRACT
Better treatment and management strategies than landfilling are needed to address the large quantities of unrecycled plastic waste generated by daily human activities. Waste-to-energy conversion is an ideal benchmark for developing future large-scale waste management technologies. The present study explores a new approach for producing energetic materials by converting inert plastic waste into energy (thermal and mechanical energies) via a light-controlled process through the simple chemical activation of plastic waste, including polyethylene, polypropylene, and polyvinyl chloride. The inert and non-polar polymer surfaces of the plastics were modified by generating a number of sulfonic groups (SO3-) using chlorosulfuric acid, followed by grafting of Fe(III) catalyst onto the polymer chains to obtain activated polymer. Elemental analyses of these activated materials showed that the carbon-to-sulfur ratio ranged from 3:1 to 5:1. The FTIR spectra indicated the presence of CC bonds (vC=C: 1615-1630â¯cm-1) and SO bonds (vS=O: 1151-1167â¯cm-1) in the activated polymers after chemical reaction. These activated materials were energetic, as light could be used to convert them into thermal (1800-3200â¯J/g) and mechanical energies (380-560â¯kPa/g) using hydrogen peroxide as the oxidant under ambient conditions within 1â¯h.