ToF-SIMS analysis of poly(L-lysine)-graft-poly(2-methyl-2-oxazoline) ultrathin adlayers.

Understanding of the interfacial chemistry of ultrathin polymeric adlayers is fundamentally important in the context of establishing quantitative design rules for the fabrication of nonfouling surfaces in various applications such as biomaterials and medical devices. In this study, seven poly(L-lysine)-graft-poly(2-methyl-2-oxazoline) (PLL-PMOXA) copolymers with grafting density (number of PMOXA chains per lysine residue) 0.09, 0.14, 0.19, 0.33, 0.43, 0.56, and 0.77, respectively, were synthesized and characterized by means of nuclear magnetic resonance spectroscopy (NMR). The copolymers were then adsorbed on Nb2O5 surfaces. Optical waveguide lightmode spectroscopy method was used to monitor the surface adsorption in situ of these copolymers and provide information on adlayer masses that were then converted into PLL and PMOXA surface densities. To investigate the relationship between copolymer bulk architecture (as shown by NMR data) and surface coverage as well as surface architecture, time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis was performed. Furthermore, ToF-SIMS method combined with principal component analysis (PCA) was used to verify the protein resistant properties of PLL-PMOXA adlayers, by thorough characterization before and after adlayer exposure to human serum. ToF-SIMS analysis revealed that the chemical composition as well as the architecture of the different PLL-PMOXA adlayers indeed reflects the copolymer bulk composition. ToF-SIMS results also indicated a heterogeneous surface coverage of PLL-PMOXA adlayers with high grafting densities higher than 0.33. In the case of protein resistant surface, PCA results showed clear differences between protein resistant and nonprotein-resistant surfaces. Therefore, ToF-SIMS results combined with PCA confirmed that the PLL-PMOXA adlayer with brush architecture resists protein adsorption. However, low increases of some amino acid signals in ToF-SIMS spectra were detected after the adlayer has been exposed to human serum.

Ru(II) glycodendrimers as probes to study lectin-carbohydrate interactions and electrochemically measure monosaccharide and oligosaccharide concentrations.

We describe a novel platform on which to study carbohydrate-protein interactions based on ruthenium(II) glycodendrimers as optical and electrochemical probes. Using the prototypical concanavalin A (ConA)-mannose lectin-carbohydrate interaction as an example, oligosaccharide concentrations were electrochemically monitored. The displacement of the Ru(II) complex from lectin-functionalized gold surfaces was repeatedly regenerated. This new platform presents a method to monitor many different complex sugars in parallel.

Merging organic and polymer chemistries to create glycomaterials for glycomics applications.

[Image: see text] Oligosaccharides at cell surfaces are known to play a critical role in many biological processes such as biorecognition, interactions between cells and with artificial surfaces, immune response, infection and inflammation. In order to facilitate studies of the role of sugars, an increasing number of novel tools are becoming available. New synthetic strategies now provide much more efficient access to complex carbohydrates or glycoconjugates. Branched carbohydrates and hybrids of carbohydrates conjugated to polymers have been prepared using solution and/or solid-phase synthesis and advanced methods of polymerization. These materials are essential for the development of methodologies to study and map the molecular structure-function relationship at interfaces. This article highlights recent advances in the synthesis of carbohydrates and polymer hybrids mimicking the properties and functionalities of the natural oligosaccharides, as well as selected applications in biology, biotechnology and diagnostics.

Physicochemical characterization of nebulized superparamagnetic iron oxide nanoparticles (SPIONs).

BACKGROUND: Aerosol-mediated delivery of nano-based therapeutics to the lung has emerged as a promising alternative for treatment and prevention of lung diseases. Superparamagnetic iron oxide nanoparticles (SPIONs) have attracted significant attention for such applications due to their biocompatibility and magnetic properties. However, information is lacking about the characteristics of nebulized SPIONs for use as a therapeutic aerosol. To address this need, we conducted a physicochemical characterization of nebulized Rienso, a SPION-based formulation for intravenous treatment of anemia. METHODS: Four different concentrations of SPION suspensions were nebulized with a one-jet nebulizer. Particle size was measured in suspension by transmission electron microscopy (TEM), photon correlation spectroscopy (PCS), and nanoparticle tracking analysis (NTA), and in the aerosol by a scanning mobility particle sizer (SMPS). RESULTS: The average particle size in suspension as measured by TEM, PCS, and NTA was 9±2 nm, 27±7 nm, and 56±10 nm, respectively. The particle size in suspension remained the same before and after the nebulization process. However, after aerosol collection in an impinger, the suspended particle size increased to 159±46 nm as measured by NTA. The aerosol particle concentration increased linearly with increasing suspension concentration, and the aerodynamic diameter remained relatively stable at around 75 nm as measured by SMPS. CONCLUSIONS: We demonstrated that the total number and particle size in the aerosol were modulated as a function of the initial concentration in the nebulizer. The data obtained mark the first known independent characterization of nebulized Rienso and, as such, provide critical information on the behavior of Rienso nanoparticles in an aerosol. The data obtained in this study add new knowledge to the existing body of literature on potential applications of SPION suspensions as inhaled aerosol therapeutics.

Significance of surface charge and shell material of superparamagnetic iron oxide nanoparticle (SPION) based core/shell nanoparticles on the composition of the protein corona.

As nanoparticles (NPs) are increasingly used in many applications their safety and efficient applications in nanomedicine have become concerns. Protein coronas on nanomaterials' surfaces can influence how the cell "recognizes" nanoparticles, as well as the in vitro and in vivo NPs' behaviors. The SuperParamagnetic Iron Oxide Nanoparticle (SPION) is one of the most prominent agents because of its superparamagnetic properties, which is useful for separation applications. To mimic surface properties of different types of NPs, a core-shell SPION library was prepared by coating with different surfaces: polyvinyl alcohol polymer (PVA) (positive, neutral and negative), SiO2 (positive and negative), titanium dioxide and metal gold. The SPIONs with different surfaces were incubated at a fixed serum : nanoparticle surface ratio, magnetically trapped and washed. The tightly bound proteins were quantified and identified. The surface charge has a great impact on protein adsorption, especially on PVA and silica where proteins preferred binding to the neutral and positively charged surfaces. The importance of surface material on protein adsorption was also revealed by preferential binding on TiO2 and gold coated SPION, even negatively charged. There is no correlation between the protein net charge and the nanoparticle surface charge on protein binding, nor direct correlation between the serum proteins' concentration and the proteins detected in the coronas.

A bioactive elastin-like recombinamer reduces unspecific protein adsorption and enhances cell response on titanium surfaces.

We present the immobilization on synthetic substrates of elastin-like recombinamers (ELR) that combine a bioactive motif for cell adhesion with protein antifouling properties. Physical adsorption of the recombinamers and covalent-grafting through organosilane chemistry were investigated. The biochemically-modified surfaces were thoroughly characterized and tested for protein absorption in serum by fluorescence-labelling, XPS, Ellipsometry, and OWLS. The ELR were successfully grafted and stable, even upon mechanical stresses; being the covalent bonding favourable over physical adsorption. The coated metal surfaces exhibited excellent reduction of serum protein adsorption (9 ng/cm(2)) compared to the bare metal surface (310 ng/cm(2)). Non-specific protein adsorption may mask the introduced bioactive motifs; therefore, the bioactivated surfaces should display serum-protein antifouling properties. Finally, improved hMSCs response was assessed on the bioactivated substrates. In summary, the coatings simultaneously displayed anti-fouling and bioactive properties. These studies investigated key factors to enhance tissue material interactions fundamental for the design of bioactive devices and future biomedical applications.

Aqueous stabilisation of carbon-encapsulated superparamagnetic α-iron nanoparticles for biomedical applications.

Carbon-based nanomaterials, such as carbon-encapsulated magnetic nanoparticles (CEMNP, core@shell), show a wide range of desirable properties for applications in the biomedical field (clinical MRI, hyperthermia), for energy production and storage (hydrogen storage), for the improvement of electronic components and for environmental applications (water-treatment). However, this kind of nanoparticle tends to aggregate in water suspensions. This often hampers the processability of the suspensions and presents an obstacle to their application in many fields. Here the stabilisation of core-shell Fe-C nanoparticles by surface adsorbed polyvinyl-alcohol (PVA) is presented. Different PVA/CEMNP mass ratios (9, 36, 144 and 576 w/w) were studied. Several characterisation techniques were used in order to determine the size distribution of the particles and to optimize the PVA/CEMNP ratio. A good colloidal stability was obtained for spherical nanoparticles about 50 nm in diameter containing several superparamagnetic Fe cores. The nanoparticles were found to be isolated and well dispersed in solution. The use of PVA for coating carbon-encapsulated Fe nanoparticles does not only result in a good colloidal stability in aqueous suspensions, but the resulting particles also show low cytotoxicity and an interesting cell internalization behaviour. The simple stabilization method developed here can likely be extended to other core@shell nanoparticle systems as well as other carbon-based nanomaterials in the future.

Magnetically aligned nanodomains: application in high-performance ion conductive membranes.

Polyelectrolyte-coated magnetic nanoparticles were prepared by decorating the surface of superparamagnetic iron oxide nanoparticles (SPIONs) with crosslinked chitosan oligopolysaccharide (CS). These positively charged particles (CS-SPIONs) were then added to a negatively charged polymer (Nafion), and cast into membranes under an applied magnetic field. TEM and SAXS measurements confirmed this process created aligned, cylindrical nanodomains in the membranes. This was also indirectly confirmed by proton conductivity values. The strong electrostatic interaction between chitosan and Nafion prevented oxygen permeability and water evaporation at elevated temperatures through the proton conductive channels. The resultant proton exchange membranes showed lower conduction dependency to relative humidity, which is highly desirable for hydrogen fuel cells. The fuel cell performance tests were performed on the designed polyelectrolyte membrane by hydrogen-oxygen single cells at elevated temperature (120 °C) and low relative humidity.

Monitoring the effects of dexamethasone treatment by MRI using in vivo iron oxide nanoparticle-labeled macrophages.

INTRODUCTION: Rheumatoid arthritis (RA) is a chronic disease causing recurring inflammatory joint attacks. These attacks are characterized by macrophage infiltration contributing to joint destruction. Studies have shown that RA treatment efficacy is correlated to synovial macrophage number. The aim of this study was to experimentally validate the use of in vivo superparamagnetic iron oxide nanoparticle (SPION) labeled macrophages to evaluate RA treatment by MRI. METHODS: The evolution of macrophages was monitored with and without dexamethasone (Dexa) treatment in rats. Two doses of 3 and 1 mg/kg Dexa were administered two and five days following induction of antigen induced arthritis. SPIONs (7 mg Fe/rat) were injected intravenously and the knees were imaged in vivo on days 6, 10 and 13. The MR images were scored for three parameters: SPION signal intensity, SPION distribution pattern and synovial oedema. Using 3D semi-automated software, the MR SPION signal was quantified. The efficacy of SPIONs and gadolinium chelate (Gd), an MR contrast agent, in illustrating treatment effects were compared. Those results were confirmed through histological measurements of number and area of macrophages and nanoparticle clusters using CD68 immunostaining and Prussian blue staining respectively. RESULTS: Results show that the pattern and the intensity of SPION-labeled macrophages on MRI were altered by Dexa treatment. While the Dexa group had a uniform elliptical line surrounding an oedema pocket, the untreated group showed a diffused SPION distribution on day 6 post-induction. Dexa reduced the intensity of SPION signal 50-60% on days 10 and 13 compared to controls (P = 0.00008 and 0.002 respectively). Similar results were found when the signal was measured by the 3D tool. On day 13, the persisting low grade arthritis progression could not be demonstrated by Gd. Analysis of knee samples by Prussian blue and CD68 immunostaining confirmed in vivo SPION uptake by macrophages. Furthermore, CD68 immunostaining revealed that Dexa treatment significantly decreased the area and number of synovial macrophages. Prussian blue quantification corresponded to the macrophage measurements and both were in agreement with the MRI findings. CONCLUSIONS: We have demonstrated the feasibility of MRI tracking of in vivo SPION-labeled macrophages to assess RA treatment effects.

Mannose-based molecular patterns on stealth microspheres for receptor-specific targeting of human antigen-presenting cells.

The targeting of antigen-presenting cells has recently gained strong attention for both targeted vaccine delivery and immunomodulation. We prepared surface-modified stealth microspheres that display various mannose-based ligands at graded ligand densities to target phagocytic C-type lectin receptors (CLRs) on human dendritic cells (DCs) and macrophages. Decoration of microspheres with carbohydrate ligands was achieved (i) by electrostatic surface assembly of mannan onto previously formed adlayers of poly( l-lysine) (PLL) or a mix of PLL and poly( l-lysine)- graft-poly(ethylene glycol) (PLL-PEG), or (ii) through assembly of PLL-PEG equipped with small substructure mannoside ligands, such as mono- and trimannose, as terminal substitution of the PEG chains. Microspheres carrying mannoside ligands were also studied in combination with an integrin-targeting RGD peptide ligand. Because of the presence of a mannan or PEG corona, such microspheres were protected against protein adsorption and opsonization, thus allowing the formation of specific ligand-receptor interactions. Mannoside density was the major factor for the phagocytosis of mannoside-decorated microspheres, although with limited efficiency. This strengthens the recent hypothesis by other authors that the mannose receptor (MR) only acts as a phagocytic receptor when in conjunction with yet unidentified partner receptor(s). Analysis of DC surface markers for maturation revealed that neither surface-assembled mannan nor mannoside-modified surfaces on the microspheres could stimulate DC maturation. Thus, phagocytosis upon recognition by CLRs alone cannot trigger DC activation toward a T helper response. The microparticulate platform established in this work represents a promising tool for systematic investigations of specific ligand-receptor interactions upon phagocytosis, including the screening for potential ligands and ligand combinations in the context of vaccine delivery and immunomodulation.

Solvent effects on the redox properties of Cu complexes used as mediators in atom transfer radical polymerization.

Solvent effects on the redox properties of six Cu(I) complexes used as mediators in atom transfer radical polymerization (ATRP) have been studied using cyclic voltammetry. The six ligands used were tris[2-(dimethylamino)ethyl]amine, N-(n-propyl)-2-pyridylmethanimine, N,N,N',N',N'-pentamethyldiethylenetriamine, 1,1,4,7,10,10-hexamethyl-triethylenetetramine, 2,2'-bipyridine, and 1,4,8,11-tetraaza-1,4,8,11-tetramethylcyclotetradecan. The solvents used were DMSO, DMF, MeCN, MeOH, IP, and BuOH. Significant solvent effects were observed and quantitatively analyzed in terms of Kamlet-Taft relationships. The resulting Kamlet-Taft equations were found to successfully describe the solvent effects and could thus be used as tools for the design of ATRP in new solvents. The solvent sensitivity of the different ligands and the nature of the solvent effects are also discussed to some extent.