ABSTRACT
The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial-biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.
Subject(s)
Biological Products , NanostructuresABSTRACT
The biological interactions of graphene have been extensively investigated over the last 10 years. However, very little is known about graphene interactions with the cell surface and how the graphene internalization process is driven and mediated by specific recognition sites at the interface with the cell. In this work, we propose a methodology to investigate direct molecular correlations between the biomolecular corona of graphene and specific cell receptors, showing that key protein recognition motifs, presented on the nanomaterial surface, can engage selectively with specific cell receptors. We consider the case of apolipoprotein A-I, found to be very abundant in the graphene protein corona, and observe that the uptake of graphene nanoflakes is somewhat increased in cells with greatly elevated expression of scavenger receptors B1, suggesting a possible mechanism of endogenous interaction. The uptake results, obtained by flow cytometry, have been confirmed using Raman microspectroscopic mapping, exploiting the strong Raman signature of graphene.
Subject(s)
Apolipoprotein A-I/metabolism , Graphite/metabolism , Nanoparticles/metabolism , Protein Corona/metabolism , Receptors, Scavenger/metabolism , Biological Transport , HEK293 Cells , Humans , Models, MolecularABSTRACT
Surface-patterning colloidal matter in the sub-10 nm regime generates exceptional functionality in biology and photonic and electronic materials. Techniques of artificially generating functional patterns in the small nanoscale advanced in a fascinating manner in the last several years. However, they remain often restricted to planar and noncolloidal substrates. Patterning colloidal matter in solution via bottom-up assembly of smaller subunits on larger core particles is highly challenging because it is necessary to force the subunits onto randomly moving objects. Consequently, the non-equilibrium conditions present during nanoparticle self-assembly are difficult to control to eventually achieve the desired material structures. Here, we describe the formation of surface patterns with intrinsic periodic repeats of 8.9 ± 0.9 nm and less on hard, amorphous colloidal core particles by assembling binary nanoparticle superlattices on the curved particle surface. The colloidal environment is preserved during the entire bottom-up crystallization of variable building blocks (here, monodispersed 5 nm Au and 2.4 nm Pd nanoparticles (NPs) and 230 nm SiO2 core particles) into AB13-like, binary, and isotropic superlattice domains on the amorphous cores. The three-dimensional, bottom-up assembly technique is a new tool for patterning colloidal matter in the sub-10 nm surface regime for gaining access to multicomponent metamaterials for bionanoscience, photonics, and electronics.
ABSTRACT
Characterizing the orientation of covalently conjugated proteins on nanoparticles, produced for in vitro and in vivo targeting, though an important feature of such a system, has proved challenging. Although extensive physicochemical characterization of targeting nanoparticles can be addressed in detail, relevant biological characterization of the nanointerface is crucial in order to select suitable nanomaterials for further in vitro or in vivo experiments. In this work, we adopt a methodology using antibody fragments (Fab) conjugated to gold nanoparticles (immunogold) to map the available epitopes on a transferrin grafted silica particle (SiO2-PEG8-Tf) as a proxy methodology to predict nanoparticle biological function, and therefore cellular receptor engagement. Data from the adopted method suggest that, on average, only â¼3.5% of proteins grafted on the SiO2-PEG8-Tf nanoparticle surface have a favorable orientation for recognition by the cellular receptor.
Subject(s)
Antibodies/chemistry , Gold/chemistry , Metal Nanoparticles/chemistry , Silicon Dioxide/chemistry , Molecular Structure , Particle Size , Surface PropertiesABSTRACT
Nanoparticles (NPs) are often functionalized with reactive groups such as amines and thiols for the subsequent conjugation of further molecules, e.g., stabilizing polymers, drugs, and proteins for targeting cells or specific diseases. In addition to the quantitative estimation of the reactive conjugation sites, their molecular positioning and nanoscale arrangement on single nanoparticles become more and more important for the tailored engineering and design of functional nanomaterials. Here, we use maleimide or sulfo-succinimidyl ester-modified 1.4 nm gold nanoclusters (AuNCs) to specifically label reactive thiol and amine groups with sub-2-nm precision on metal oxide and polymeric nanostructures. We confirm the binding of AuNCs by measuring and modeling sedimentation properties using analytical centrifugation, imaging their surface distribution and surface distances by transmission electron microscopy (TEM), and comparing the results to ensemble measurements of numbers of reactive surface groups obtained by common photometric assays. We map thiol and amine groups introduced on silica NPs (SiNPs), titania stars (Ti), silica inverse opals (SiOps), and polystyrene NPs (PS NPs). We show that the method is suitable for mapping local, clustered inhomogeneities of the reactive sites on single SiNPs introduced by masking certain areas during surface functionalization. Mapping precise positions of reactive surface groups is essential to the design and tailored ligation of multifunctional nanomaterials.
ABSTRACT
Most inhaled nanomedicines in development are for the treatment of lung disease, yet little is known about their interaction with the respiratory tract lining fluids (RTLFs). Here we combined the use of nano-silica, as a protein concentrator, with label-free snapshot proteomics (LC-MS/MS; key findings confirmed by ELISA) to generate a quantitative profile of the RTLF proteome and provided insight into the evolved corona; information that may be used in future to improve drug targeting to the lungs by inhaled medicines. The asthmatic coronal proteome displayed a reduced contribution of surfactant proteins (SP-A and B) and a higher contribution of α1-antitrypsin. Pathway analysis suggested that asthmatic RTLFs may also be deficient in proteins related to metal handling (e.g. lactoferrin). This study demonstrates how the composition of the corona acquired by inhaled nanoparticles is modified in asthma and suggests depressed mucosal immunity even in mild airway disease.
Subject(s)
Asthma/metabolism , Lung/metabolism , Nanoparticles/metabolism , Protein Corona/metabolism , Silicon Dioxide/metabolism , Administration, Inhalation , Humans , Protein Corona/analysis , Proteome/analysis , Proteome/metabolism , ProteomicsABSTRACT
Ultrasmall nanoparticles (USNPs), usually defined as NPs with core in the size range 1-3â nm, are a class of nanomaterials which show unique physicochemical properties, often different from larger NPs of the same material. Moreover, there are also indications that USNPs might have distinct properties in their biological interactions. For example, recent inâ vivo experiments suggest that some USNPs escape the liver, spleen, and kidney, in contrast to larger NPs that are strongly accumulated in the liver. Here, we present a simple approach to study the biomolecular interactions at the USNPs bio-nanointerface, opening up the possibility to systematically link these observations to microscopic molecular principles.
Subject(s)
Body Fluids/chemistry , Gold/chemistry , Metal Nanoparticles/chemistry , Proteins/chemistry , Humans , Ligands , Molecular Structure , Particle Size , Surface PropertiesABSTRACT
Ultrasmall nanoparticulate materials with core sizes in the 1-3nm range bridge the gap between single molecules and classical, larger-sized nanomaterials, not only in terms of spatial dimension, but also as regards physicochemical and pharmacokinetic properties. Due to these unique properties, ultrasmall nanoparticles appear to be promising materials for nanomedicinal applications. This review overviews the different synthetic methods of inorganic ultrasmall nanoparticles as well as their properties, characterization, surface modification and toxicity. We moreover summarize the current state of knowledge regarding pharmacokinetics, biodistribution and targeting of nanoscale materials. Aside from addressing the issue of biomolecular corona formation and elaborating on the interactions of ultrasmall nanoparticles with individual cells, we discuss the potential diagnostic, therapeutic and theranostic applications of ultrasmall nanoparticles in the emerging field of nanomedicine in the final part of this review.
Subject(s)
Nanomedicine/trends , Nanoparticles/therapeutic use , Humans , Nanostructures , Nanotechnology , Tissue DistributionABSTRACT
When inhaled nanoparticles deposit in the lungs, they transit through respiratory tract lining fluid (RTLF) acquiring a biomolecular corona reflecting the interaction of the RTLF with the nanomaterial surface. Label-free snapshot proteomics was used to generate semi-quantitative profiles of corona proteins formed around silica (SiO2) and poly(vinyl) acetate (PVAc) nanoparticles in RTLF, the latter employed as an archetype drug delivery vehicle. The evolved PVAc corona was significantly enriched compared to that observed on SiO2 nanoparticles (698 vs. 429 proteins identified); however both coronas contained a substantial contribution from innate immunity proteins, including surfactant protein A, napsin A and complement (C1q and C3) proteins. Functional protein classification supports the hypothesis that corona formation in RTLF constitutes opsonisation, preparing particles for phagocytosis and clearance from the lungs. These data highlight how an understanding of the evolved corona is necessary for the design of inhaled nanomedicines with acceptable safety and tailored clearance profiles. FROM THE CLINICAL EDITOR: Inhaled nanoparticles often acquire a layer of protein corona while they go through the respiratory tract. Here, the authors investigated the identity of these proteins. The proper identification would improve the understanding of the use of inhaled nanoparticles in future therapeutics.
Subject(s)
Drug Delivery Systems , Nanoparticles/administration & dosage , Protein Corona , Respiratory System/metabolism , Adult , Aspartic Acid Endopeptidases/biosynthesis , Aspartic Acid Endopeptidases/isolation & purification , Body Fluids/metabolism , Complement C1q/biosynthesis , Complement C1q/isolation & purification , Complement C3/biosynthesis , Complement C3/isolation & purification , Female , Gene Expression Regulation/drug effects , Humans , Male , Nanoparticles/adverse effects , Proteomics , Pulmonary Surfactant-Associated Protein A/biosynthesis , Pulmonary Surfactant-Associated Protein A/isolation & purification , Respiratory System/drug effects , Silicon Dioxide/administration & dosage , Silicon Dioxide/chemistryABSTRACT
Nano-sized polymers as polystyrene (PS) constitute one of the main challenges for marine ecosystems, since they can distribute along the whole water column affecting planktonic species and consequently disrupting the energy flow of marine ecosystems. Nowadays very little knowledge is available on the impact of nano-sized plastics on marine organisms. Therefore, the present study aims to evaluate the effects of 40nm anionic carboxylated (PS-COOH) and 50nm cationic amino (PS-NH2) polystyrene nanoparticles (PS NPs) on brine shrimp Artemia franciscana larvae. No signs of mortality were observed at 48h of exposure for both PS NPs at naplius stage but several sub-lethal effects were evident. PS-COOH (5-100µg/ml) resulted massively sequestered inside the gut lumen of larvae (48h) probably limiting food intake. Some of them were lately excreted as fecal pellets but not a full release was observed. Likewise, PS-NH2 (5-100µg/ml) accumulated in larvae (48h) but also adsorbed at the surface of sensorial antennules and appendages probably hampering larvae motility. In addition, larvae exposed to PS-NH2 undergo multiple molting events during 48h of exposure compared to controls. The activation of a defense mechanism based on a physiological process able to release toxic cationic NPs (PS-NH2) from the body can be hypothesized. The general observed accumulation of PS NPs within the gut during the 48h of exposure indicates a continuous bioavailability of nano-sized PS for planktonic species as well as a potential transfer along the trophic web. Therefore, nano-sized PS might be able to impair food uptake (feeding), behavior (motility) and physiology (multiple molting) of brine shrimp larvae with consequences not only at organism and population level but on the overall ecosystem based on the key role of zooplankton on marine food webs.
Subject(s)
Artemia/drug effects , Nanoparticles/toxicity , Polystyrenes/toxicity , Animals , Artemia/metabolism , Chemical Phenomena , Larva/drug effects , Larva/metabolism , Nanoparticles/chemistry , Polystyrenes/chemistry , Toxicity Tests, Acute , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/toxicity , Zooplankton/drug effects , Zooplankton/metabolismABSTRACT
High-resolution live cell microscopy will soon have a fundamental role in understanding bio-nano interactions, providing material that can be exploited using single particle tracking techniques. The present work uses 3D timelapse images obtained with confocal microscopy, to temporally resolve the co-localization between polystyrene nanoparticles and lysosomes in live cells through object-based measurements.
Subject(s)
Lung Neoplasms/pathology , Microscopy, Confocal/instrumentation , Nanoparticles/chemistry , Biological Transport , Cell Line, Tumor , Fluorescent Dyes/chemistry , Humans , Imaging, Three-Dimensional , Lung Neoplasms/metabolism , Lysosomes/chemistry , Microscopy, Confocal/methods , Polystyrenes/chemistry , Stochastic Processes , Time FactorsABSTRACT
We report here a protocol to characterise and monitor the quality of in vitro human cellular barrier models using Transmission Electron Microscopy (TEM), which can be applied for transport assays, mechanistic studies and screening of drug/compound (including nanoparticle) penetration across such biological barriers. Data from two examples of biological barriers are given, namely the hCMEC/D3 endothelial blood-brain barrier model, and the Caco-2 intestinal epithelial barrier model, to show the general applicability of the method. Several aspects of this method are applicable to the quality assurance of in vitro barrier models, e.g., assessment of the multi or mono-layer structure of the endothelial cells; identification of any potential "holes" in the barrier that could confound transport assay results; validation of tight junction expression; and determination of the types and amounts of key cellular organelles present in the barrier to account for any significant changes in phenotype that may occur compared to the in vivo situation. The method described here provides a key advantage in that it prevents loss of the filter membrane during monolayer sectioning, thereby preserving critical details associated with the basal cell membrane. Applicability of the protocol for other in vitro biological barriers, such as the blood-foetus, blood-testes, blood-cerebrospinal fluid (CSF) and lung alveolar-capillary barriers is also discussed. Additionally, we demonstrate the use of the method for assessment of nanoparticle transport across cellular barriers and elucidation of transcytosis mechanisms. Sequential events of cellular endocytosis, localisation and transcytosis can be described in detail by TEM imaging, revealing useful sub-cellular details that provide evidence for the mechanism of nanoparticle transport in the hCMEC/D3 blood-brain barrier model and the Caco-2 intestinal epithelial cell model. Potential artefacts resulting from the nanoparticles interacting with the Transwell membranes can also be assessed.
Subject(s)
Blood-Brain Barrier/metabolism , Gold/metabolism , Intestinal Mucosa/metabolism , Metal Nanoparticles/chemistry , Microscopy, Electron, Transmission , Models, Biological , Blood-Brain Barrier/chemistry , Caco-2 Cells , Cell Line , Gold/chemistry , Humans , Intestinal Mucosa/chemistry , Serum Albumin/chemistry , Serum Albumin/metabolismABSTRACT
Nanoparticles (NP), when exposed to biological fluids, are coated by specific proteins that form the so-called protein corona. While some adsorbing proteins exchange with the surroundings on a short time scale, described as a "dynamic" corona, others with higher affinity and long-lived interaction with the NP surface form a "hard" corona (HC), which is believed to mediate NP interaction with cellular machineries. In-depth NP protein corona characterization is therefore a necessary step in understanding the relationship between surface layer structure and biological outcomes. In the present work, we evaluate the protein composition and stability over time and we systematically challenge the formed complexes with surfactants. Each challenge is characterized through different physicochemical measurements (dynamic light scattering, ζ-potential, and differential centrifugal sedimentation) alongside proteomic evaluation in titration type experiments (surfactant titration). 100 nm silicon oxide (Si) and 100 nm carboxylated polystyrene (PS-COOH) NPs cloaked by human plasma HC were titrated with 3-[(3-Cholamidopropyl) dimethylammonio]-1-propanesulfonate (CHAPS, zwitterionic), Triton X-100 (nonionic), sodium dodecyl sulfate (SDS, anionic), and dodecyltrimethylammonium bromide (DTAB, cationic) surfactants. Composition and density of HC together with size and ζ-potential of NP-HC complexes were tracked at each step after surfactant titration. Results on Si NP-HC complexes showed that SDS removes most of the HC, while DTAB induces NP agglomeration. Analogous results were obtained for PS NP-HC complexes. Interestingly, CHAPS and Triton X-100, thanks to similar surface binding preferences, enable selective extraction of apolipoprotein AI (ApoAI) from Si NP hard coronas, leaving unaltered the dispersion physicochemical properties. These findings indicate that surfactant titration can enable the study of NP-HC stability through surfactant variation and also selective separation of certain proteins from the HC. This approach thus has an immediate analytical value as well as potential applications in HC engineering.
Subject(s)
Nanoparticles/chemistry , Proteins/chemistry , Surface-Active Agents/chemistry , Electrophoresis, Gel, Two-Dimensional , HumansABSTRACT
Nanoparticles in contact with cells and living organisms generate quite novel interactions at the interface between the nanoparticle surface and the surrounding biological environment. However, a detailed time resolved molecular level description of the evolving interactions as nanoparticles are internalized and trafficked within the cellular environment is still missing and will certainly be required for the emerging arena of nanoparticle-cell interactions to mature. In this paper promising methodologies to map out the time resolved nanoparticle-cell interactome for nanoparticle uptake are discussed. Thus silica coated magnetite nanoparticles are presented to cells and their magnetic properties used to isolate, in a time resolved manner, the organelles containing the nanoparticles. Characterization of the recovered fractions shows that different cell compartments are isolated at different times, in agreement with imaging results on nanoparticle intracellular location. Subsequently the internalized nanoparticles can be further isolated from the recovered organelles, allowing the study of the most tightly nanoparticle-bound biomolecules, analogous to the 'hard corona' that so far has mostly been characterized in extracellular environments. Preliminary data on the recovered nanoparticles suggest that significant portion of the original corona (derived from the serum in which particles are presented to the cells) is preserved as nanoparticles are trafficked through the cells.
Subject(s)
Magnetics , Nanoparticles , Organelles/metabolism , Cell Line, Tumor , Humans , Microscopy, Electron, TransmissionABSTRACT
Nanoparticle properties, such as small size relative to large highly modifiable surface area, offer great promise for neuro-therapeutics and nanodiagnostics. A fundamental understanding and control of how nanoparticles interact with the blood-brain barrier (BBB) could enable major developments in nanomedical treatment of previously intractable neurological disorders, and help ensure that nanoparticles not intended to reach the brain do not cause adverse effects. Nanosafety is of utmost importance to this field. However, a distinct lack of knowledge exists regarding nanoparticle accumulation within the BBB and the biological effects this may induce on neighbouring cells of the Central Nervous System (CNS), particularly in the long-term. This study focussed on the exposure of an in vitro BBB model to model carboxylated polystyrene nanoparticles (PS COOH NPs), as these nanoparticles are well characterised for in vitro experimentation and have been reported as non-toxic in many biological settings. TEM imaging showed accumulation but not degradation of 100 nm PS COOH NPs within the lysosomes of the in vitro BBB over time. Cytokine secretion analysis from the in vitro BBB post 24 h 100 nm PS COOH NP exposure showed a low level of pro-inflammatory RANTES protein secretion compared to control. In contrast, 24 h exposure of the in vitro BBB endothelium to 100 nm PS COOH NPs in the presence of underlying astrocytes caused a significant increase in pro-survival signalling. In conclusion, the tantalising possibilities of nanomedicine must be balanced by cautious studies into the possible long-term toxicity caused by accumulation of known 'toxic' and 'non-toxic' nanoparticles, as general toxicity assays may be disguising significant signalling regulation during long-term accumulation.
Subject(s)
Blood-Brain Barrier/metabolism , Cytokines/metabolism , Nanoparticles/toxicity , Paracrine Communication/physiology , Polymers/toxicity , Blood-Brain Barrier/drug effects , Cell Line, Transformed , Cell Survival/drug effects , Cell Survival/physiology , Endothelial Cells/drug effects , Endothelial Cells/metabolism , Humans , Inflammation Mediators/metabolism , Paracrine Communication/drug effectsABSTRACT
Colloidal nanoparticles designed for the interactions with cells are very small, nanoscale objects usually consisting of inorganic cores and organic shells that are dispersed in a buffer or biological medium. By tuning the material properties of the nanoparticles a number of different biological applications of nanomaterials are enabled i.e. targeting, labelling, drug delivery, use as diagnostic tools or therapy. For all biological applications of nanoparticles, it is important to understand their interactions with the surrounding biological environment in order to predict their biological impact, in particular when designing the nanoparticles for diagnostic and therapeutic purpose. Due to the high surface-to-volume ratio, the surface of nanomaterials is very reactive. When exposed to biological fluids, the proteins and biomolecules present therein tend to associate with the nanoparticles' surface. This phenomenon is defined as biomolecular corona formation. The biomolecular corona plays a key role in the interaction between nanoparticles and biological systems, impacting on how these particles interact with biological systems on a cellular and molecular level. This book chapter describes the nature of the interactions at the bio-nano interface, shows the design strategy of nanoparticles for nanomedicine, and defines the concepts of biomolecular corona and biological identity of nanoparticles. Moreover, it describes the interaction of functionalised nanomaterials with cell organelles and intracellular fate of nanoparticles and it shows therapeutic application of gold nanoparticles as dose enhancers in radiotherapy.
Subject(s)
Cells/drug effects , Nanostructures , Organelles/drug effects , Animals , Drug Delivery Systems , Humans , Nanomedicine/methods , Nanostructures/chemistry , Nanostructures/therapeutic use , Nanostructures/toxicity , Radiation-Sensitizing Agents/chemistry , Radiation-Sensitizing Agents/pharmacologyABSTRACT
Graphing graphene: Because the naming of graphene-based materials (GBMs) has led to confusion and inconsistency, a classification approach is necessary. Three physical-chemical properties of GBMs have been defined by the GRAPHENE Flagship Project of the European Union for the unequivocal classification of these materials (see grid).
Subject(s)
Graphite/chemistry , Nanostructures/chemistry , Materials Testing , NanotechnologyABSTRACT
The interactions between nanosized particles and living systems are commonly mediated by what adsorbs to the nanoparticle in the biological environment, its biomolecular corona, rather than the pristine surface. Here, we characterize the adhesion toward the cell membrane of nanoparticles of different material and size and study how this is modulated by the presence or absence of a corona on the nanoparticle surface. The results are corroborated with adsorption to simple model supported lipid bilayers using a quartz crystal microbalance. We conclude that the adsorption of proteins on the nanoparticle surface strongly reduces nanoparticle adhesion in comparison to what is observed for the bare material. Nanoparticle uptake is described as a two-step process, where the nanoparticles initially adhere to the cell membrane and subsequently are internalized by the cells via energy-dependent pathways. The lowered adhesion in the presence of proteins thereby causes a concomitant decrease in nanoparticle uptake efficiency. The presence of a biomolecular corona may confer specific interactions between the nanoparticle-corona complex and the cell surface including triggering of regulated cell uptake. An important effect of the corona is, however, a reduction in the purely unspecific interactions between the bare material and the cell membrane, which in itself disregarding specific interactions, causes a decrease in cellular uptake. We suggest that future nanoparticle-cell studies include, together with characterization of size, charge, and dispersion stability, an evaluation of the adhesion properties of the material to relevant membranes.
Subject(s)
Cell Membrane/chemistry , Nanoparticles/chemistry , Adsorption , Cell Line , Humans , Kinetics , Lipid Bilayers/chemistry , Surface PropertiesABSTRACT
Put your coat on: It is well recognized that the surfaces of nanomaterials in biological media are covered by various biomolecules (e.g., proteins). A) The protein corona creates a shell over different nanomaterials, regardless of their physicochemical properties (e.g., composition and shape), resulting in reduced levels of amyloid beta fibril formation. B) Pristine nanomaterials might have acceleratory effects on the fibrillation of amyloid beta.
Subject(s)
Amyloid beta-Peptides/metabolism , Nanostructures/chemistry , Amyloid beta-Peptides/chemistry , Fullerenes/chemistry , Nanostructures/ultrastructure , Nanotubes, Carbon/chemistry , Polystyrenes/chemistryABSTRACT
PAMAM (polyamidoamine) dendrimers are promising in biomedical applications that can interact with both the bilayer and . Here we employed giant unilamellar vesicles (GUVs) of two different charge densities to study the effect of albumin, one of the major in blood plasma, on the interactions between PAMAM dendrimers and membranes. The results show that albumin exacerbates the effect of dendrimers on the destabilization of the vesicles in terms of leakage, aggregation and collapse in particular for negatively charged vesicles while neutrally charged membranes are not affected. We conclude that the higher affinity of both albumin and PAMAM G6 towards negatively charged membranes explains their synergistic behavior in this case. In the case of neutral vesicles, the affinity between PAMAM G6 and albumin is stronger than that between PAMAM G6 (or albumin) and neutral vesicles, and thus no synergism is observed for the mixture during the interaction with neutral membranes.