A universal and accurate LPMI method for calculating mismatch in heterogeneous ice nucleation.

The interfacial correlation factor f(m,x), where m refers to the interaction among ice, water and the substrate and x refers to the ratio of the critical nucleation size to the surface topography characteristic size of the substrate, plays a crucial role in the classical theory of heterogeneous ice nucleation as it significantly impacts the energy of nucleation. Generally, a smaller value of f(m,x) indicates a higher propensity for ice nucleation. The degree of structural compatibility between ice and the substrate greatly influences f(m,x), particularly on specific substrates. Several approaches have been proposed to calculate the lattice matching based on this idea, which allows whether a surface is favorable for nucleation to be determined. However, none of these methods adequately correlates the mismatch index with ice growth phenomena. In this paper, we embarked on a new attempt to calculate the mismatch index by combining the lattice parameter and Miller index (LPMI). Droplet freezing experiments have been carried out on α-Al2O3 and silicon surfaces with different Miller indices to verify the rationality of the LPMI method. Furthermore, we validated the LPMI method extensively against other works and further demonstrated its readiness, accuracy and universality for freezing problems. The results consistently show that δd = 2|di - ds|/(di + ds) with interplanar spacing more accurately predicts heterogeneous ice nucleation rates across a wide range of substrates than δ1 = (ai - as)/ai with the lattice parameter of ice and the substrate and is more generally applicable than δ2D = (di - di)/di with the distances between two adjacent and congener atoms on the same plane. We believe that the proposed approach will aid in the selection of substrates for promoting or inhibiting heterogeneous nucleation on a specific substrate.

Research Progress on the Degradation of Organic Pollutants in Wastewater via Ultrasound/Periodate Systems: A Review.

In recent years, the efficient removal of organic pollutants from wastewater has emerged as a critical area of global research interest. Against this backdrop, an array of innovative technologies for wastewater treatment has been developed. Among numerous advanced oxidation processes (AOPs), periodate (PI), an emerging oxidizing agent in AOPs, has garnered significant attention from researchers. Particularly, the integration of ultrasound (US)-activated PI systems has been recognized as an exceptionally promising approach for the synergistic degradation of organic pollutants in wastewater. In this paper, we conducted a thorough analysis of the mechanisms underlying the degradation of organic pollutants using the US/PI system. Furthermore, we comprehensively delineated the effects of ultrasonic power, periodate concentration, temperature, pH, coexisting inorganic ions, and dissolved organic matter on the removal efficiency of organic pollutants and summarized application cases of the US/PI system for the degradation of different pollutants. Finally, we also offered prospective discussions on the future trajectories of US/PI technology development.

Preparation, Characterization, Photochromic Properties, and Mechanism of PMoA/ZnO/PVP Composite Film.

A novel photochromic heteropolyacid-based composite film consisting of phosphomolybdic acid (PMoA), ZnO, and polyvinylpyrrolidone (PVP) was fabricated by a sol-gel process. The microstructure and photochromic properties of the PMoA/ZnO/PVP were characterized via Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible spectroscopy (UV-Vis). The FTIR spectra showed that the basic structures of ZnO and PVP, and the Keggin structure of PMoA in the PMoA/ZnO/PVP composite film, had not been destroyed during the preparation. The TEM images demonstrated that ZnO presented a rod-like structure, while PMoA was spherical, and many PMoA balls adhered to the surface of the ZnO rods. The XPS spectra of Mo 3d indicated that the valency of Mo atoms in the PMoA/ZnO/PVP was changed by visible light exposure. After visible light irradiation, the PMoA/ZnO/PVP varied from slight yellow to blue, while undergoing an opposite color change upon heating. The discoloration mechanism of the PMoA/ZnO/PVP was consistent with the photoelectron transfer mechanism.

Piezoelectric polarization coupled with photoinduced catalytic oxidation technology for environmental pollution control: Recent advances and future prospects.

Energy scarcity and environmental pollution concerns have become substantial impediments to sustainable global economic development. The advent of semiconductor photocatalysis technology provides a potential possibility for effectively alleviating excessive energy consumption and maintaining the long-term stability of the aqueous ecosystem. However, the inefficient transmission efficiency of charge carriers and the high recombination rate of photogenerated electron-hole pairs will culminate in the mediocre catalytic performance observed in conventional semiconductor materials. Fortunately, the piezo-photocatalysis ingeniously integrates the piezoelectric properties of piezoelectric crystals with the optoelectronic properties of semiconductors, thus building a theoretical system of photo-electric-chemical three-phase coupled catalysis. Currently, the photo-mechanical energy synergistic catalytic oxidation degradation process, as a cutting-edge technology based on clean renewable energy, has been perceived as a promising environmental remediation strategy. Herein, a critical review of the application of piezo-photocatalysis in environmental pollution control was delivered. We undertook a comprehensive analysis to elucidate the underlying enhancement mechanism of the piezoelectric effect on photocatalysis in terms of charge migration dynamics and pertinent energy band bending phenomena. In addition, we meticulously summarized diverse innovative methods for introducing vibration energy in piezo-photocatalytic degradation systems (ultrasound, fluid mechanical energy, airflow, self-assembled reactors, etc.). Then, state-of-the-art research advances in the field of environmental pollution control and the corresponding environmental decontamination mechanisms were elaborated based on various integration modes of catalysts (single component, noble metal deposition, heterojunction, coupled substrate materials, etc.). Eventually, an in-depth assessment of current limitations and development trends of piezo-photocatalytic degradation technology has been proposed, along with proactive strategies aimed at surmounting the existing challenges.

Heat Transfer Characteristics of Carbon-Based Photothermal Superhydrophobic Materials with Thermal Insulation Micropores During Anti-icing/Deicing.

Photothermal deicing is a noncontact, economically, efficient, and environmentally friendly melting/preventing ice method. Obtaining a cheap, easily fabricated material with high photothermal conversion and deicing efficiency is a challenge. Here, carbon-based photothermal superhydrophobic materials with thermal insulation micropores were prepared by using the salt-template. We demonstrate that the microholes array structure can enhance light absorption and hydrophobicity of the material, and the micropores structure can inhibit the heat transfer from the surface to the subcooled substrate, which synergistically greatly enhances the photothermal conversion. A heat transfer model was established to clarify the influence mechanisms of air cushion on interfacial heat transfer during the photothermal anti-icing and deicing process. The self-cleaning, flexibility, mechanical, and chemical stability tests show that the material has the potential for outdoor application. The prepared materials with high photothermal deicing efficiency provide a new way for the anti-icing and deicing of outdoor equipment.

Carbon-Based Photothermal Superhydrophobic Materials with Hierarchical Structure Enhances the Anti-Icing and Photothermal Deicing Properties.

Ice formation on the surface of outdoor equipment brings significant inconvenience to human life and production. Superhydrophobic materials with the micro-nanostructure are considered to be effective anti-icing materials. However, repeated icing and deicing processes will destroy the structure and lose anti-icing properties. Herein, low-cost, durable, high-efficiency photothermal superhydrophobic materials were prepared by electrochemical deposition and silanization treatment methods. Combined with the black-body property of carbon materials and the micro-nano hierarchical structure, the as-prepared material has excellent photothermal and superhydrophobic properties. The surface temperature can rise to 90 °C, and the freezing droplets can melt in 100 s under 100 mW/cm2 of sunlight illumination. The superhydrophobic property endows the material with excellent anti-icing performance, and the icing delay time is as long as 3600 s. The melted water droplet can quickly roll off due to the low adhesion of the superhydrophobic surface, which avoids the refreezing of the melted droplet and enhances the photothermal conversion performance. We innovatively use the elemental tracer method to understand the melted water droplet roll off mechanism on inclined surfaces. In addition, the heat transfer model of anti-icing and photothermal deicing processes are established to confirm that the heat required for melting ice during the deicing process is mainly generated by photothermal materials. Finally, the feasibility of practical application of the material was verified by the anti-icing/deicing experiment of a wind turbine blade and ice/frost layer melting experiment. It concludes that the superior anti-icing and deicing properties are realized using the high photothermal conversion and excellent superhydrophobic properties of the prepared photothermal superhydrophobic materials. This study provides a perspective for constructing micro-nano hierarchical structures on the surface and combining them with the abundant solar energy in nature to develop photothermal anti-icing materials for practical application.