Finite element modeling with patient-specific geometry to assess clinical risks of percutaneous pulmonary valve implantation.

BACKGROUND: Percutaneous pulmonary valve implantation (PPVI) is a non-surgical treatment for right ventricular outflow tract (RVOT) dysfunction. During PPVI, a stented valve, delivered via catheter, replaces the dysfunctional pulmonary valve. Stent oversizing allows valve anchoring within the RVOT, but overexpansion can intrude on the surrounding structures. Potentially dangerous outcomes include aortic valve insufficiency (AVI) from aortic root (AR) distortion and myocardial ischemia from coronary artery (CA) compression. Currently, risks are evaluated via balloon angioplasty/sizing before stent deployment. Patient-specific finite element (FE) analysis frameworks can improve pre-procedural risk assessment, but current methods require hundreds of hours of high-performance computation. METHODS: We created a simplified method to simulate the procedure using patient-specific FE models for accurate, efficient pre-procedural PPVI (using balloon expandable valves) risk assessment. The methodology was tested by retrospectively evaluating the clinical outcome of 12 PPVI candidates. RESULTS: Of 12 patients (median age 14.5 years) with dysfunctional RVOT, 7 had native RVOT and 5 had RV-PA conduits. Seven patients had undergone successful RVOT stent/valve placement, three had significant AVI on balloon testing, one had left CA compression, and one had both AVI and left CA compression. A model-calculated change of more than 20% in lumen diameter of the AR or coronary arteries correctly predicted aortic valve sufficiency and/or CA compression in all the patients. CONCLUSION: Agreement between FE results and clinical outcomes is excellent. Additionally, these models run in 2-6 min on a desktop computer, demonstrating potential use of FE analysis for pre-procedural risk assessment of PPVI in a clinically relevant timeframe.

Atherosclerotic Calcifications Have a Local Effect on the Peel Behavior of Human Aortic Media.

Aortic dissections, characterized by the propagation of a tear through the layers of the vessel wall, are critical, life-threatening events. Aortic calcifications are a common comorbidity in both acute and chronic dissections, yet their impact on dissection mechanics remains unclear. Using micro-computed tomography (CT) imaging, peel testing, and finite element modeling, this study examines the interplay between atherosclerotic calcifications and dissection mechanics. Samples cut from cadaveric human thoracic aortas were micro-CT imaged and subsequently peel-tested to map peel tension curves to the location of aortic calcifications. Empirical mode decomposition separated peel tension curves into high and low-frequency components, with high-frequency effects corresponding to interlamellar bonding mechanics and low-frequency effects to peel tension fluctuations. Finally, we used an idealized finite element model to examine how stiff calcifications affect aortic failure mechanics. Results showed that atherosclerosis influences dissection behavior on multiple length scales. Experimentally, atherosclerotic samples exhibited higher peel tensions and greater variance in the axial direction. The variation was driven by increased amplitudes of low-frequency tension fluctuations in diseased samples, indicating that more catastrophic propagations occur near calcifications. The simulations corroborated this finding, suggesting that the low-frequency changes resulted from the presence of a stiff calcification in the vessel wall. There were also modifications to the high-frequency peel mechanics, a response likely attributable to alterations in the microstructure and interlamellar bonding within the media. Considered collectively, these findings demonstrate that dissection mechanics are modified in aortic media nearby and adjacent to aortic calcifications.