Bioinspired, Anticoagulative, 19 F MRI-Visualizable Bilayer Hydrogel Tubes as High Patency Small-Diameter Vascular Grafts.

The clinical patency of small-diameter vascular grafts (SDVGs) (ID < 6 mm) is limited, with the formation of mural thrombi being a major threat of this limitation. Herein, a bilayered hydrogel tube based on the essential structure of native blood vessels is developed by optimizing the relation between vascular functions and the molecular structure of hydrogels. The inner layer of the SDVGs comprises a zwitterionic fluorinated hydrogel, avoiding the formation of thromboinflammation-induced mural thrombi. Furthermore, the position and morphology of the SDVGs can be visualized via 19 F/1 H magnetic resonance imaging. The outer poly(N-acryloyl glycinamide) hydrogel layer of SDVGs provides matched mechanical properties with native blood vessels through the multiple and controllable intermolecular hydrogen-bond interactions, which can withstand the accelerated fatigue test under pulsatile radial pressure for 380 million cycles (equal to a service life of 10 years in vivo). Consequently, the SDVGs exhibit higher patency (100%) and more stable morphology following porcine carotid artery transplantation for 9 months and rabbit carotid artery transplantation for 3 months. Therefore, such a bioinspired, antithrombotic, and visualizable SDVG presents a promising design approach for long-term patency products and great potential of helping patients with cardiovascular diseases.

Core Role of Hydrophobic Core of Polymeric Nanomicelle in Endosomal Escape of siRNA.

Efficient endosomal escape is the most essential but challenging issue for siRNA drug development. Herein, a series of quaternary ammonium-based amphiphilic triblock polymers harnessing an elaborately tailored pH-sensitive hydrophobic core were synthesized and screened. Upon incubating in an endosomal pH environment (pH 6.5-6.8), mPEG45-P(DPA50-co-DMAEMA56)-PT53 (PDDT, the optimized polymer) nanomicelles (PDDT-Ms) and PDDT-Ms/siRNA polyplexes rapidly disassembled, leading to promoted cytosolic release of internalized siRNA and enhanced silencing activity evident from comprehensive analysis of the colocalization and gene silencing using a lysosomotropic agent (chloroquine) and an endosomal trafficking inhibitor (bafilomycin A1). In addition, PDDT-Ms/siPLK1 dramatically repressed tumor growth in both HepG2-xenograft and highly malignant patient-derived xenograft models. PDDT-Ms-armed siPD-L1 efficiently blocked the interaction of PD-L1 and PD-1 and restored immunological surveillance in CT-26-xenograft murine model. PDDT-Ms/siRNA exhibited ideal safety profiles in these assays. This study provides guidelines for rational design and optimization of block polymers for efficient endosomal escape of internalized siRNA and cancer therapy.

Screening and Matching Amphiphilic Cationic Polymers for Efficient Antibiosis.

The amphiphilic cationic polymers that mimic antimicrobial peptides have received increasing attention due to their excellent antibacterial activity. However, the relationship between the structure of cationic polymers and its antibacterial effect remains unclear. In our current work, a series of PEG blocked amphiphilic cationic polymers composed of hydrophobic alkyl-modified and quaternary ammonium salt (QAS) moieties have been prepared. The structure-antibacterial activity relationship of these cationic polymers was investigated against E. coli and S. aureus, including PEGylation, random structure, molecular weights, and the content and lengths of the hydrophobic alkyl side chains. The results indicated that PEGylated random amphiphilic cationic copolymer (mPB35/T57) showed stronger antibacterial activity and better biocompatibility than the random copolymer without PEG (PB33/T56). Furthermore, mPB35/T57 with appropriate mole fraction of alkyl side chains (falkyl = 0.38), degree of polymerization (DP = 92), and four-carbon hydrophobic alkyl moieties was found to have the optimal structure that revealed the best antibacterial activities against both E. coli (MIC = 8 µg/mL, selectivity > 250) and S. aureus (MIC = 4 µg/mL, selectivity > 500). More importantly, mPB35/T57 could effectively eradicate E. coli biofilms by killing the bacteria embedded in the biofilms. Therefore, the structure of mPB35/T57 provided valuable information for improving the antibacterial activity of cationic polymers.

An injectable thermosensitive hydrogel self-supported by nanoparticles of PEGylated amino-modified PCL for enhanced local tumor chemotherapy.

We synthesized amino-modified poly(ε-caprolactone) PCN-b-PEG-b-PCN (PECN) triblock copolymers and studied the contribution of the introduced amino groups to the drug delivery efficiency of PECN nanoparticles (NPs) and their injectable thermosensitive hydrogels. PECN15 with an optimal amino group content was obtained. Firstly, the hydrophobic drug paclitaxel (PTX) was loaded into PECN15 up to 5.91% and formed PTX/PECN NPs 90 nm in size and with a slightly positive charge (7.3 mV). Furthermore, the injectable PTX/PECN NPs aqueous solution (25 wt%) at ambient temperature could undergo fast gelation at 37 °C and sustainedly release PTX/PECN NPs in 10 days. More importantly, compared with our previously reported PECT NPs, the PECN NPs without an increase in toxicity could improve the cell uptake and enhance intracellular drug release by responding to the acidic environment of the endosome. Thus, the PTX/PECN NPs presented a lower IC50 of 3.14 µg mL-1 than that of the PTX/PECT NPs (7.67 µg mL-1) and free PTX (4.65 µg mL-1). Moreover, through peritumoral injection, the PTX/PECNGel showed 94.27% inhibition rate of tumor growth on day 19, higher than PTX/PECTGel (72.28%) and Taxol® (47.03%). Therefore, the PECN NPs hydrogel provided a more effective injectable platform to enhance local cancer chemotherapy, and also provided the possibility of further functionalization by the reactive amino groups.

Facile Fabrication of Redox-Responsive Covalent Organic Framework Nanocarriers for Efficiently Loading and Delivering Doxorubicin.

Covalent organic frameworks (COFs) as drug delivery systems have shown great promise, but their pharmaceutical applications are often limited by complex building blocks, tedious preparations, irregular shape, and uncontrolled drug release within target cells. Herein, a facile strategy is developed to prepare PEGylated redox-responsive nanoscale COFs (denoted F68@SS-COFs) for efficiently loading and delivering doxorubicin (DOX) by use of FDA-approved Pluronic F68 and commercially available building blocks. The obtained F68@SS-COFs with controlled size, high stability, and good biocompatibility can not only achieve a very high DOX-loading content (about 21%) and very low premature leakage at physiological condition but can also rapidly respond to the tumor intracellular microenvironment and efficiently release DOX to kill tumor cells. Considering the readily available raw materials, simple preparation process, and desirable redox-responsiveness, the strategy provided here opens up a promising avenue to develop well-defined COFs-based nanomedicines for cancer therapy.

Facile Access to Multisensitive and Self-Healing Hydrogels with Reversible and Dynamic Boronic Ester and Disulfide Linkages.

Multifunctional and multiresponsive hydrogels have presented a promising platform to design and fabricate smart devices for application in a wide variety of fields. However, their preparations often involve multistep preparation of multiresponsive polymer precursors, tedious reactions to introduce functional groups or sophisticated molecular designs. In this work, a multifunctional boronic acid-based cross-linker bis(phenylboronic acid carbamoyl) cystamine (BPBAC) was readily prepared from inexpensive commercially available 3-carboxylphenylboronic acid (CPBA) and cystamine dihydrochloride, which has the ability to cross-link the cis-diols and catechol-containing hydrophilic polymers to form hydrogels. Due to the presence of the reversible and dynamic boronate ester and disulfide bonds, the obtained hydrogels were demonstrated to not only possess pH, glucose, and redox triresponsive features, but also have autonomic self-healing properties under ambient conditions. Moreover, we can modulate the rheological and mechanical properties by simply adjusting the BPBAC amount. The features, such as commercially available starting materials, easy-to-implement approach, and versatility in controlling cross-linking network and mechanical properties, make the strategy described here a promising platform for fabricating multifunctional and smart hydrogels.

Smart nanoparticles improve therapy for drug-resistant tumors by overcoming pathophysiological barriers.

The therapeutic outcome of chemotherapy is severely limited by intrinsic or acquired drug resistance, the most common causes of chemotherapy failure. In the past few decades, advancements in nanotechnology have provided alternative strategies for combating tumor drug resistance. Drug-loaded nanoparticles (NPs) have several advantages over the free drug forms, including reduced cytotoxicity, prolonged circulation in the blood and increased accumulation in tumors. Currently, however, nanoparticulate drugs have only marginally improved the overall survival rate in clinical trials because of the various pathophysiological barriers that exist in the tumor microenvironment, such as intratumoral distribution, penetration and intracellular trafficking, etc. Smart NPs with stimulus-adaptable physico-chemical properties have been extensively developed to improve the therapeutic efficacy of nanomedicine. In this review, we summarize the recent advances of employing smart NPs to treat the drug-resistant tumors by overcoming the pathophysiological barriers in the tumor microenvironment.

A reconstituted thermosensitive hydrogel system based on paclitaxel-loaded amphiphilic copolymer nanoparticles and antitumor efficacy.

Combination delivery systems composed of injectable hydrogels and drug-incorporated nanoparticles are urgently in regional cancer chemotherapy to facilitate efficient delivery of chemotherapeutic agents, enhance antitumor efficiency, and decrease side effects. Here, we developed a novel thermosensitive amphiphilic triblock copolymer consisting of methoxy poly(ethylene glycol), poly(octadecanedioic anhydride), and d,l-lactic acid oligomer (PEOALA), built a combination system of thermosensitive injectable hydrogel PTX/PEOALAGel based on paclitaxel (PTX)-loaded PEOALA nanoparticles (NPs). PTX/PEOALAGel could be stored as freeze-dried powders of paclitaxel-loaded PEOALA NPs, which could be easily redispersed into the water at ambient temperature, and form a hydrogel at the injected site in vivo. The in vitro cytotoxicity of PTX/PEOALAGel showed no obvious cytotoxicity in comparison with Taxol® against MCF-7 and HeLa cells. However, the in vivo antitumor activity showed that a single intratumoral injection of the PTX/PEOALAGel formulation was more effective than four intravenous (i.v.) injections of Taxol® at a total dosage of 20 mg/kg in inhibiting the growth of MCF-7 tumor-bearing Balb/c mice, and the inhibition could be sustained for more than 17 d. The pharmacokinetic study demonstrated that the intratumoral injection of PTX/PEOALAGel could greatly decrease the systemic exposure of PTX, as confirmed by the rather low plasma concentration, and prolonged circulation time and enhanced tumor PTX accumulation, implying fewer off-target side effects. In summary, the PTX/PEOALAGel combination local delivery system could enhance tumor inhibition effect and tumor accumulation of PTX, and lower the systemic exposure. So, the reconstituted PTX/PEOALAGel system could potentially be a useful vehicle for regional cancer chemotherapy.

pH-Sensitive Nanomicelles for High-Efficiency siRNA Delivery in Vitro and in Vivo: An Insight into the Design of Polycations with Robust Cytosolic Release.

The extremely low efficient cytosolic release of the internalized siRNA has emerged recently as a central issue for siRNA delivery, while there is a lack of guidelines to facilitate the cytosolic release of internalized siRNA. To address these concerns, we studied the contribution of the pH-sensitive inner core on handling the cytosolic release of siRNA delivered by a series of PG-P(DPAx-co-DMAEMAy)-PCB amphiphilic polycation nanomicelles (GDDC-Ms) with extremely low internalization (<1/4 of lipofactamine 2000 (Lipo2000)). Significantly, just by varying the mole ratio of DPA and DMAEMA to adjust the initial disassembly pH (pHdis) of the core near to 6.8, GDDC4-Ms/siRNA could get nearly 98.8% silencing efficiency at w/w = 12 with 50 nM siRNA and ∼78% silencing efficiency at w/w = 30 with a very low dose of 5 nM siRNA in HepG-2 cell lines, while Lipo2000 only got 65.7% with 50 nM siRNA. Furthermore, ∼98.4% silencing efficiency was also realized in the hard-to-transfect human acute monoblastic leukemia cell line U937 by GDDC4-Ms/siRNA (at w/w = 15, 50 nM siRNA), in the inefficient case for Lipo2000. Additionally, the high silencing efficiency (∼80%) in skin tissue in vivo was discovered. Undoubtedly, the robust potential of GDDC4-Ms in handling the cytosolic release paves a simple but efficient new way for the design of the nonviral siRNA vector.

Compact solar autoclave based on steam generation using broadband light-harvesting nanoparticles.

The lack of readily available sterilization processes for medicine and dentistry practices in the developing world is a major risk factor for the propagation of disease. Modern medical facilities in the developed world often use autoclave systems to sterilize medical instruments and equipment and process waste that could contain harmful contagions. Here, we show the use of broadband light-absorbing nanoparticles as solar photothermal heaters, which generate high-temperature steam for a standalone, efficient solar autoclave useful for sanitation of instruments or materials in resource-limited, remote locations. Sterilization was verified using a standard Geobacillus stearothermophilus-based biological indicator.

Synthesis of Nanogels via Cell Membrane-Templated Polymerization.

The synthesis of biomimetic hydrogel nanoparticles coated with a natural cell membrane is described. Compared to the existing strategy of wrapping cell membranes onto pre-formed nanoparticle substrates, this new approach forms the cell membrane-derived vesicles first, followed by growing nanoparticle cores in situ. It adds significant controllability over the nanoparticle properties and opens unique opportunities for a broad range of biomedical applications.

PEG-b-PCL copolymer micelles with the ability of pH-controlled negative-to-positive charge reversal for intracellular delivery of doxorubicin.

The application of PEG-b-PCL micelles was dampened by their inherent low drug-loading capability and relatively poor cell uptake efficiency. In this study, a series of novel PEG-b-PCL copolymers methoxy poly(ethylene glycol)-b-poly(ε-caprolactone-co-γ-dimethyl maleamidic acid -ε-caprolactone) (mPEG-b-P(CL-co-DCL)) bearing different amounts of acid-labile ß-carboxylic amides on the polyester moiety were synthesized. The chain structure and chemical composition of copolymers were characterized by (1)H NMR, Fourier transform infrared spectroscopy (FT-IR), and gel permeation chromatography (GPC). mPEG-b-P(CL-co-DCL) with critical micellar concentrations (CMCs) of 3.2-6.3 µg/mL could self-assemble into stable micelles in water with diameters of 100 to 150 nm. Doxorubicin (DOX), a cationic hydrophobic drug, was successfully encapsulated into the polymer micelles, achieving a very high loading content due to electrostatic interaction. Then the stability, charge-conversional behavior, loading and release profiles, cellular uptake and in vitro cytotoxicity of free drug and drug-loaded micelles were evaluated. The ß-carboxylic amides functionalized polymer micelles are negatively charged and stable in neutral solution but quickly become positively charged at pH 6.0, due to the hydrolysis of ß-carboxylic amides in acidic conditions. The pH-triggered negative-to-positive charge reversal not only resulted in a very fast drug release in acidic conditions, but also effectively enhanced the cellular uptake by electrostatic absorptive endocytosis. The MTT assay demonstrated that mPEG-b-P(CL-co-DCL) micelles were biocompatible to HepG2 cells while DOX-loaded micelles showed significant cytotoxicity. In sum, the introduction of acid-labile ß-carboxylic amides on the polyester block in mPEG-b-P(CL-co-DCL) exhibited great potentials for the modifications in the stability in blood circulation, drug solubilization, and release properties, as well as cell internalization and intracellular drug release.

Integrin-targeted zwitterionic polymeric nanoparticles with acid-induced disassembly property for enhanced drug accumulation and release in tumor.

Reasonably structural design of nanoparticles (NPs) to combine functions of prolonged systemic circulation, enhanced tumor targeting and specific intracellular drug release is crucial for antitumor drug delivery. Combining advantages of Arg-Gly-Asp (RGD) for active tumor targeting, zwitterionic polycarboxybetaine methacrylate (PCB) for prolonged systemic circulation, poly(2-(diisopropylamino) ethyl methacrylate) (PDPA) for acid-triggered intracellular release, novel RGD-PCB-b-PDPA (RGD-PCD) block copolymers were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization and followed by functionalization with RGD. Doxorubicine (DOX) was encapsulated within the RGD-PCD NPs as model medicine (RGD-PCD/DOX NPs). With ultra pH-sensitivity of PDPA, the drug release was restrained at pH 7.4 for only 24% within 36 h, which was increased to 60% at pH 6.0 within 24 h, and released more rapidly at pH 5.0 for 100% within 5 h, indicating that the RGD-PCD/DOX NPs were able to turn drug release "off" at neutral pH (e.g., systemic circulation) whereas "on" under acidic conditions (e.g., inside endo/lysosomes). Furthermore, the results of fluorescence microscopy and flow cytometry analysis demonstrated improved internalization of RGD-PCD/DOX NPs in HepG2 cells via integrin-mediated endocytosis with rapid DOX release intracellularly. Consequently, the RGD-PCD/DOX NPs showed considerable cytotoxicity against HepG2 and HeLa cells in comparison with free DOX. Importantly, the RGD-PCD/DOX NPs exhibited little protein adsorption property with excellent serum stability, which led to prolonged systemic circulation and enhanced tumor accumulation in tumor-bearing nude mice. Therefore, this multifunctional RGD-PCD NPs, which represented the flexible design approach, showed great potential for the development of novel nanocarriers in tumor-targeted drug delivery.

Long duration sodium hyaluronate hydrogel with dual functions of both growth prompting and acid-triggered antibacterial activity for bacteria-infected wound healing.

Conventional wound dressings are monolithically designed to cover the injured areas as well as absorb the exudates at injured site. Furthermore, antibacterial drugs and growth prompting factors are additionally appended to realize sensible and omnibearing wound management, exhibiting long and tedious treatment process in practice. Consequently, the creation of multifunctional wound dressings that combines wound repair enhancement with antibacterial properties turns out to be significant for simplifying wound managements. In our investigation, electronegative human epidermal growth factor (hEGF) was combined with the positively charged Zn-Al layered double hydroxides (Zn-Al LDHs) via electrostatic interaction while the obtained hEGF/LDH was integrated with sodium hyaluronate hydrogel (SH) hydrogel, forming a composite hydrogel with synergistic benefits for wound management. The innovative hEGF/LDH@SH hydrogel equipped with fine biocompatibility was designed to optimize wound healing in which hEGF stimulates epithelial cell growth while LDH released antibacterial factor Zn2+ against Methicillin-resistant staphylococcus aureus (MRSA) and Escherichia coli (E.coli) under acidic wound environment. Additionally, the SH hydrogel constructed a three-dimensional structure that not only safeguarded the wound area but also maintained a moist environment conducive to recovery. The synthesized hEGF/LDH was confirmed via fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and thermo-gravimetry (TG) measurements. The release of Zn2+ from Zn-Al LDH under acid circumstance was detected via inductively coupled plasma (ICP) and the in vitro bactericidal experiments endowed the antibacterial property of hEGF/LDH@SH hydrogel. In vitro drug release experiments illustrated the controlled-release of hEGF from hEGF/LDH which promoted the long-term affect of hEGF at wound site. In vitro cell experiments verified that the hEGF/LDH@SH hydrogel motivated the promotion on cell proliferation and migration without cytotoxicity. An in vivo study of the repairing of MRSA-infected wound in mice indicated that hEGF/LDH@SH hydrogel serves as a simple and novel, innoxious and efficient wound healing approach. This brand new hydrogel possesses properties of promoting the regeneration of skin tissue, achieving antimicrobial therapy without any accessional antibacterial drugs as well as realizing controlled release of hEGF.

Bioactive microgel-coated electrospun membrane with cell-instructive interfaces and topology for abdominal wall defect repair.

Current mesh materials used for the clinical treatment of abdominal defects struggle to balance mechanical properties and bioactivity to support tissue remodeling. Therefore, a bioactive microgel-coated electrospinning membrane was designed with the superiority of cell-instructive topology in guiding cell behavior and function for abdominal wall defect reconstruction. The electrostatic spinning technique was employed to prepare a bioabsorbable PLCL fiber membrane with an effective mechanical support. Additionally, decellularized matrix (dECM)-derived bioactive microgels were further coated on the fiber membrane through co-precipitation with dopamine, which was expected to endow cell-instructive hydrophilic interfaces and topological morphologies for cell adhesion. Moreover, the introduction of the dECM into the microgel promoted the myogenic proliferation and differentiation of C2C12 cells. Subsequently, in vivo experiments using a rat abdominal wall defect model demonstrated that the bioactive microgel coating significantly contributed to the reconstruction of intact abdominal wall structures, highlighting its potential for clinical application in promoting the repair of soft tissue defects associated with abdominal wall damage. This study presented an effective mesh material for facilitating the reconstruction of abdominal wall defects and contributed novel design concepts for the surface modification of scaffolds with cell-instructive interfaces and topology.

Preparation and characterization of a polyurethane-based sponge wound dressing with a superhydrophobic layer and an antimicrobial adherent hydrogel layer.

Bacterial infection poses a significant impediment in wound healing, necessitating the development of dressings with intrinsic antimicrobial properties. In this study, a multilayered wound dressing (STPU@MTAI2/AM1) was reported, comprising a surface-superhydrophobic treated polyurethane (STPU) sponge scaffold coupled with an antimicrobial hydrogel. A superhydrophobic protective outer layer was established on the hydrophilic PU sponge through the application of fluorinated zinc oxide nanoparticles (F-ZnO NPs), thereby resistance to environmental contamination and bacterial invasion. The adhesive and antimicrobial inner layer was an attached hydrogel (MTAI2/AM1) synthesized through the copolymerization of N-[2-(methacryloyloxy)ethyl]-N, N, N-trimethylammonium iodide and acrylamide, exhibits potent adherence to dermal surfaces and broad-spectrum antimicrobial actions against resilient bacterial strains and biofilm formation. STPU@MTAI2/AM1 maintained breathability and flexibility, ensuring comfort and conformity to the wound site. Biocompatibility of the multilayered dressing was demonstrated through hemocompatibility and cytocompatibility studies. The multilayered wound dressing has demonstrated the ability to promote wound healing when addressing MRSA-infected wounds. The hydrogel layer demonstrates no secondary damage when peeled off compared to commercial polyurethane sponge dressing. The STPU@MTAI2/AM1-treated wounds were nearly completely healed by day 14, with an average wound area of 12.2 ± 4.3 %, significantly lower than other groups. Furthermore, the expression of CD31 was significantly higher in the STPU@MTAI2/AM1 group compared to other groups, promoting angiogenesis in the wound and thereby contributing to wound healing. Therefore, the prepared multilayered wound dressing presents a promising therapeutic candidate for the management of infected wounds. STATEMENT OF SIGNIFICANCE: Healing of chronic wounds requires avoidance of biofouling and bacterial infection. However developing a wound dressing which is both anti-biofouling and antimicrobial is a challenge. A multilayered wound dressing with multifunction was developed. Its outer layer was designed to be superhydrophobic and thus anti-biofouling, and its inner layer was broad-spectrum antimicrobial and could inhibit biofilm formation. The multilayered wound dressing with adhesive property could easily be removed from the wound surface preventing the cause of secondary damage. The multilayered wound dressing has demonstrated good abilities to promote MRSA-infected wound healing and presents a viable treatment for MRSA-infected wound.

Comb-like amphiphilic copolymers bearing acetal-functionalized backbones with the ability of acid-triggered hydrophobic-to-hydrophilic transition as effective nanocarriers for intracellular release of curcumin.

The pH-responsive micelles have enormous potential as nanosized drug carriers for cancer therapy due to their physicochemical changes in response to the tumor intracellular acidic microenvironment. Herein, a series of comb-like amphiphilic copolymers bearing acetal-functionalized backbone were developed based on poly[(2,4,6-trimethoxybenzylidene-1,1,1-tris(hydroxymethyl) ethane methacrylate-co-poly(ethylene glycol) methyl ether methacrylate] [P(TTMA-co-mPEGMA)] as effective nanocarriers for intracellular curcumin (CUR) release. P(TTMA-co-mPEGMA) copolymers with different hydrophobic-hydrophilic ratios were prepared by one-step reversible addition fragmentation chain transfer (RAFT) copolymerization of TTMA and mPEGMA. Their molecular structures and chemical compositions were confirmed by (1)H NMR, Fourier transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). P(TTMA-co-mPEGMA) copolymers could self-assemble into nanosized micelles in aqueous solution and displayed low critical micelle concentration (CMC). All P(TTMA-co-mPEGMA) micelles displayed excellent drug loading capacity, due to the strong π-π conjugate action and hydrophobic interaction between the PTTMA and CUR. Moreover, the hydrophobic PTTMA chain could be selectively hydrolyzed into a hydrophilic backbone in the mildly acidic environment, leading to significant swelling and final disassembly of the micelles. These morphological changes of P(TTMA-co-mPEGMA) micelles with time at pH 5.0 were determined by DLS and TEM. The in vitro CUR release from the micelles exhibited a pH-dependent behavior. The release rate of CUR was significantly accelerated at mildly acidic pH of 4.0 and 5.0 compared to that at pH 7.4. Toxicity test revealed that the P(TTMA-co-mPEGMA) copolymers exhibited low cytotoxicity, whereas the CUR-loaded micelles maintained high cytotoxicity for HepG-2 and EC-109 cells. The results indicated that the novel P(TTMA-co-mPEGMA) micelles with low CMC, small and tunable sizes, high drug loading, pH-responsive drug release behavior, and good biocompatibility may have potential as hydrophobic drug delivery nanocarriers for cancer therapy with intelligent delivery.

Electrospinning of ibuprofen-loaded composite nanofibers for improving the performances of transdermal patches.

The main aim of the present study was to electrospin ibuprofen (IBU)-loaded composite nanofibers to improve the performances of transdermal patches. Cellulose acetate/poly(vinyl pyrrolidone) (CA/PVP) blends were used to fabricate uniform nanofibers. Investigations on the physicochemical properties of CA/PVP solutions indicated that the addition of appropriate PVP improved the electrospinnability of original CA solutions. Detections on the physical states of IBU in medicated CA/PVP nanofibers suggested that IBU was uniformly distributed in nanofibers in an amorphous state. Comparing to IBU-loaded casting membrane, the medicated CA/PVP nanofibers provided a faster IBU diffusion manner and a better ex vitro skin permeation profile due to their high superficial areas and the amorphous IBU. Furthermore, CA/PVP nanofibers exhibited a high water vapor permeability, which could render an improved breathability to transdermal patches. In sum, the electrospun drug-loaded CA/PVP nanofibers exhibited great potentials to improve the thermodynamic stability and breathability of transdermal patches, which could be used to develop new types of transdermal drug delivery system (TDDS).

Design and in vitro evaluation of transdermal patches based on ibuprofen-loaded electrospun fiber mats.

To improve the poor compatibility among different components of Drug-in-adhesive type patch, two novel plasters (Drug-in-fiber and Drug-in-adhesive/fiber) were developed based on ibuprofen (IBU)-loaded fiber mats. These fibrous mats were fabricated via electrospinning of cellulose acetate/poly(vinylpyrrolidone) composites in a binary solvent of N,N-dimethyl acetamide/acetone. Physical status studies suggested that Drug-in-fiber could inhibit IBU re-crystallization, but the active ingredients were released at a relatively slow rate due to the dual-resistance of fiber mat and adhesive matrix. To overcome this shortcoming, Drug-in-adhesive/fiber was designed by coupling medicated hydrophilic pressure sensitive adhesive and IBU-loaded fiber mat. This method endowed Drug-in-adhesive/fiber a fast IBU release rate and high permeated drug amount though simulative skins. This design separated enhancer from adhesive matrix, which guaranteed Drug-in-adhesive/fiber excellent adhesion forces. Hence, the plasters based on medicated fiber mats improved the compatibility among patch components.

Janus polyurethane sponge as an antibiofouling, antibacterial, and exudate-managing dressing for accelerated wound healing.

The non-fouling condition, bacteria-free environment and suitable moisture at wound site are crucial for chronic wound healing. However, it remains highly meaningful yet challenging to develop wound dressings that can simultaneously achieve these desirable functions. In this work, a kind of multifunctional Janus polyurethane sponge (Janus-PU) was designed and fabricated by coating near-infrared (NIR)-responsive and superhydrophobic nanoparticles (F-ZnO@Ag NPs) on one surface of sponge. The nano-functionalized outer layer can endow Janus-PU with superhydrophobic antifouling property for preventing bacterial colonization and broad-spectrum antibacterial activity due to the presence of Ag NPs. Especially, the synergistic combination of asymmetric structure and strong NIR photothermal effect can impart Janus-PU with NIR-controlled unidirectional exudate removal, thus achieving an optimal wetting environment for wound healing. The mice full-thickness skin acute wounds treated with Janus-PU under NIR irradiation showed superior anti-infection and healing effect compared to the commercial dressings. Significantly, the treatment using Janus-PU with NIR irradiation can accelerate the recovery of methicillin-resistant Staphylococcus aureus (MRSA)-infected diabetic chronic wounds due to the synergistic effect of antibiofouling, antibacterial and exudate-managing. The Janus-PU as a promising multifunctional dressing can prevent bacterial invasion and create an appropriate environment for wound healing, providing an effective solution for intractable wounds and infections. STATEMENT OF SIGNIFICANCE: The development of advanced wound dressings to ensure non-fouling condition, bacteria-free environment and suitable moisture is crucial for chronic wound healing. However, it remains a considerable challenge to simultaneously integrate antibiofouling, antibacterial and exudate-managing properties into a single dressing. In this work, we developed a kind of multifunctional Janus polyurethane sponge (Janus-PU) by a single-sided superhydrophobic modification strategy, which can simultaneously achieve superhydrophobic antifouling property, effective broad-spectrum antibacterial and near-infrared controlled exudate removal. The Janus-PU designed herein can not only create an optimal environment for accelerated wound healing, but also avoid frequent dressing replacement, thus providing an ideal material system for intractable wounds and infections.