Enantioselective Amination of 4-Substituted Pyrazolones Catalyzed by Oxindole-Containing Thioureas and by a Recyclable Linear-Polymer-Supported Analogue in a Continuous Flow Process.

A highly efficient organocatalytic amination of 4-substituted pyrazolones with azodicarboxylates mediated by a novel quinine-derived thiourea with a 3,3-diaryl-oxindole scaffold is reported. This synthetic method furnished 4-amino-5-pyrazolones in high yields and with excellent enantioselectivities (up to 97:3 er) at room temperature in short reaction times. Moreover, a linear-polymer-supported bifunctional thiourea, synthesized by reacting a bifunctional aromatic monomer (biphenyl) with isatin in superacidic media and further derivatization, was proven to be also an efficient heterogeneous organocatalyst for this α-amination reaction. The practical value of this process was demonstrated by the use of the immobilized catalyst in recycling experiments, maintaining the activity without additional reactivation, and in flow processes, allowing the synthesis of 4-amino-pyrazolone derivatives in a gram scale with high yield and enantioselectivity.

Palladium Catalysts Supported in Microporous Phosphine Polymer Networks.

A new set of microporous organic polymers (POPs) containing diphosphine derivatives synthesized by knitting via Friedel-Crafts has been attained. These amorphous three-dimensional materials have been prepared by utilizing diphosphines, 1,3,5-triphenylbenzene, and biphenyl as nucleophile aromatic groups, dimethoxymethane as the electrophilic linker, and FeCl3 as a promoting catalyst. These polymer networks display moderate thermal stability and high microporosity, boasting BET surface areas above 760 m2/g. They are capable of coordinating with palladium acetate, using the phosphine derivative as an anchoring center, and have proven to be highly efficient catalysts in Suzuki-Miyaura coupling reactions involving bromo- and chloroarenes under environmentally friendly (using water and ethanol as solvents) and aerobic conditions. These supported catalysts have achieved excellent turnover numbers (TON) and turnover frequencies (TOF), while maintaining good recyclability without significant loss of activity or Pd leaching after five consecutive reaction cycles.

Aromatic Polyimide Membranes with tert-Butyl and Carboxylic Side Groups for Gas Separation Applications-Covalent Crosslinking Study.

A set of aromatic copolyimides was obtained by reaction of 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and mixtures of the diamines 1,4-bis(4-amino-2-trifluoromethylphenoxy)-2,5-di-tert-butylbenzene (CF3TBAPB) and 3,5-diamino benzoic acid (DABA). These polymers were characterized and compared with the homopolymer derived from 6FDA and CF3TBAPB. All copolyimides showed high molecular weight values and good mechanical properties. The presence of carboxylic groups in these copolymers allowed their chemical crosslinking by reaction with 1,4-butanediol. Glass transition temperatures (Tg) were higher than 260 °C, showing the non-crosslinked copolyimides had the highest Tg values. Degradation temperature of crosslinked copolyimides was lower than their corresponding non-crosslinked ones. Mechanical properties of all polymers were good, and thus, copolyimide (precursor, and crosslinked ones) films could be tested as gas separation membranes. It was observed that CO2 permeability values were around 100 barrer. Finally, the plasticization resistance of the crosslinked material having a large number of carboxylic groups was excellent.

Porous Organic Polymers Containing Active Metal Centers for Suzuki-Miyaura Heterocoupling Reactions.

A new generation of confined palladium(II) catalysts covalently attached inside of porous organic polymers (POPs) has been attained. The synthetic approach employed was straightforward, and there was no prerequisite for making any modification of the precursor polymer. First, POP-based catalytic supports were obtained by reacting one symmetric trifunctional aromatic monomer (1,3,5-triphenylbenzene) with two ketones having electron-withdrawing groups (4,5-diazafluoren-9-one, DAFO, and isatin) in superacidic media. The homopolymers and copolymers were made using stoichiometric ratios between the functional groups, and they were obtained with quantitative yields after the optimization of reaction conditions. Moreover, the number of chelating groups (bipyridine moieties) available to bind Pd(II) ions to the catalyst supports was modified using different DAFO/isatin ratios. The resulting amorphous polymers and copolymers showed high thermal stability, above 500 °C, and moderate-high specific surface areas (from 760 to 935 m2 g-1), with high microporosity contribution (from 64 to 77%). Next, POP-supported Pd(II) catalysts were obtained by simple immersion of the catalyst supports in a palladium(II) acetate solution, observing that the metal content was similar to that theoretically expected according to the amount of bipyridine groups present. The catalytic activity of these heterogeneous catalysts was explored for the synthesis of biphenyl and terphenyl compounds, via the Suzuki-Miyaura cross-coupling reaction using a green solvent (ethanol/water), low palladium loads, and aerobic conditions. The findings showed excellent catalytic activity with quantitative product yields. Additionally, the recyclability of the catalysts, by simply washing it with ethanol, was excellent, with a sp2-sp2 coupling yield higher than 95% after five cycles of use. Finally, the feasibility of these catalysts to be employed in tangible organic reactions was assessed. Thus, the synthesis of a bulky compound, 4,4'-dimethoxy-5'-tert-butyl-m-terphenylene, which is a precursor of a thermal rearrangement monomer, was scaled-up to 2 g, with high conversion and 96% yield of the pure product.