Influence of different drilling protocols and bone density on the insertion torque of dental implants.

BACKGROUND: The insertion torque of dental implants will depend on a combination of different factors such as bone density, the design of the implant and the drilling protocol used. However, it is not clear how the interaction of these factors affects the final insertion torque and which drilling protocol should be used in each clinical situation. The aim of this work is to analyse the influence of bone density, implant diameter and implant length on the insertion torque using different drilling protocols. MATERIAL AND METHODS: An experimental study was carried out in which the maximum insertion torque was measured, in standardised polyurethane blocks (Sawbones Europe AB) of four densities, for M12 Oxtein dental implants (Oxtein, Spain) with diameters of 3.5, 4.0, 4.5 and 5mm, and lengths of 8.5mm, 11.5mm and 14.5mm. All these measurements were carried out following four drilling protocols, a standard protocol, adding a bone tap, cortical drill or conical drill. In this way, a total of 576 samples were obtained. For the statistical analysis, the table of confidence intervals, mean, standard deviation and covariance was carried out, in total and grouped by the parameters used. RESULTS: The insertion torque for D1 bone obtained very high levels, reaching 77 6.95 N/cm, these values improved with the use of conical drills. In D2 bone, the mean torque obtained was 37.89± 13.70N/cm, with values within the standard. In D3 and D4 bone significantly low torques were obtained with values of 14.97± 4.40N/cm and 9.88± 4.16N/cm (p>0.001) respectively. CONCLUSIONS: In D1 bone, conical drills must be incorporated in drilling to avoid excessive torque, while in D3 and D4 bone, these would be contraindicated, as they drastically decrease the insertion torque, which may compromise the treatment.

Advantages of surgical simulation in the surgical reconstruction of oncological patients.

BACKGROUND: Stereolithography, which consists of computer-aided designed/computer-aided manufactured (CAD-CAM) and computer simulations, is a manufacturing technologies used for the production of definitive models and prototypes printed in three dimensions, and is widely used in Oral and Maxillofacial Surgery. Surgical procedures using models made by these technologies offer several advantages. MATERIALS AND METHODS: This article describes three clinical cases of our experiences with patients diagnosed with squamous cell carcinoma and mandibular osteosarcoma, who underwent surgical removal of the lesions and subsequent mandibular reconstruction with a free fibula graft using surgical guides. RESULTS: In all three clinical cases, surgical guides were used for the mandibular osteotomy, fibula osteotomy, and graft placement in the recipient area. DISCUSSION: Surgical guidelines are useful for improving the accuracy of surgical interventions and are appropriate for many types of resection and mandibular reconstruction.

Influence of dental treatment in place on quality of life in oral cancer patients undergoing chemoradiotherapy.

BACKGROUND: This study aims to assess, in the population of patients with oral cancer treatment, the influence on the quality of life of two protocols of dental treatment: not ruled hospital treatment versus ruled hospital treatment. Matrial and Methods: A quasi-experimental approach justified on ethical grounds was used. A total of 41 patients were included in the control group (not ruled treatment outpatient health center) and 40 in the experimental group (ruled hospital treatment). A total of 14 questions to both groups were conducted in three stages: before starting cancer treatment, during treatment and after treatment. the proportions of positive responses in groups and different times were compared using the chi-square test. RESULTS: Based on similar situations during cancer treatment were identified as six issues favorable to the experimental group difference. This number rose to nine after finishing oncological treatment. CONCLUSIONS: From our data we can confirm that planned dental treatment performed during the oral cancer treatment produces an improvement in the quality of life in patients with oral cancer.

A Prospective, Double-Blind, Randomized, Controlled Clinical Trial in the Gingivitis Prevention with an Oligomeric Proanthocyanidin Nutritional Supplement.

AIM: To evaluate the effectiveness on tissue response of the new nutritional supplement made of oligomeric proanthocyanidins in induced gingivitis after 21 days of use. MATERIAL AND METHODS: A prospective, double-blind, randomized, controlled clinical trial was carried out on 20 patients; it is divided into an experimental group and a control group after fulfilling the selection criteria. Patients had to come 4 times during the study to register the Silness and Löe index, the gingival bleeding index, the plaque index, the inflammatory crevicular fluid study (IL6), and the changes in the brightness of the gingiva. No complementary hygiene methods were allowed during the 21 days. RESULTS: The Silness and Löe index was higher in the control group than in the experimental group, reaching a twofold difference between the groups (p < 0.0001). The gingival bleeding index also supports this fact, since the bleeding was lower in the experimental group (p < 0.005). However, the dental plaque on the tooth surface according to the plaque index was 33% higher in the experimental group (p < 0.006). Some differences in the IL-6 were found in the crevicular fluid (p < 0.0001). CONCLUSION: Oligomeric proanthocyanidins have an effect on the periodontal tissue's health. No effects on the accumulation of plaque on the tooth surface were found, so further studies are needed to determine the nature of the plaque.

Reduction rate by decompression as a treatment of odontogenic cysts.

BACKGROUND: Odontogenic cysts are defined as those cysts that arise from odontogenic epithelium and occur in the tooth-bearing regions of the jaws. Cystectomy, marsupialization or decompression of odontogenic cyst are treatment approach to this pathology. The aim of this study was to evaluate the effectiveness of the decompression as the primary treatment of the cystic lesions of the jaws and them reduction rates involving different factors. MATERIAL AND METHODS: 23 patients with odontogenic cysts of the jaws, previously diagnosed by anatomical histopathology (follicular cysts (7) and radicular cysts (16)) underwent decompression as an initial treatment. Clinical examination and pre and post panoramic radiograph were measured and analyzed. In addition, data as gender, age, time reduction and location of the lesion were collected. RESULTS: Significant results were obtained in relation to the location of lesions and the reduction rate (p<0.01). In a higher initial lesion, a greater reduction rate was observed (p<0.05). CONCLUSIONS: Decompression as an initial treatment of cystic lesions of the jaws was effective; it reduces the size of the lesions avoiding a possible damage to adjacent structures. Cystic lesions in the mandible, regardless of the area where they occur will have a higher reduction rate if it is compared with the maxilla. Similar behavior was identified in large lesions compared to smaller.