Dual-functional single-atomic Mo/Fe clusters-decorated C3N5 via three electron-pathway in oxygen reduction reaction for tandemly removing contaminants from water.

Inspired by the development of single-atom catalysts (SACs), the fabrication of multimetallic SACs can be a promising technical approach for the in situ electro-Fenton (EF) process. Herein, dual-functional atomically dispersed Mo-Fe sites embedded in carbon nitride (C3N5) (i.e., MoFe/C3N5) were synthesized via a facile SiO2 template method. The atomically isolated bimetallic configuration in MoFe/C3N5 was identified by combining the microscopic and spectroscopic techniques. The MoFe/C3N5 catalyst on the cathode exhibited a remarkable catalytic activity toward the three electron-dominated oxygen reduction reaction in sodium sulfate, leading to a highly effective EF reaction with a low overpotential for the removal of organic contaminants from wastewater. The new catalyst showed a superior performance over its conventional counterparts, owing to the dual functions of the dual-metal active sites. Density functional theory (DFT) analysis revealed that the dual-functional 50-MoFe/C3N5 catalyst enabled a synergistic action of the Mo-Fe dual single atomic centers, which can alter the adsorption/dissociation behavior and decrease the overall reaction barriers for effective organic oxidation during the EF process. This study not only sheds light on the controlled synthesis of atomically isolated catalyst materials but also provides deeper understanding of the structure-performance relationship of the nanocatalysts with dual active sites for the catalytic EF process. Additionally, the findings will promote the advanced catalysis for the treatment of emerging organic contaminants in water and wastewater.

Construction of Ultrafine PtIr Clusters Supported on Co3O4 Nanoflowers for Enhanced Overall Water Splitting.

Green hydrogen production through electrochemical overall water splitting has suffered from sluggish oxygen evolution reaction (OER) kinetics, inferior conversion efficiency, and high cost. Herein, ultrafine PtIr clusters are synthesized via an electrodeposition method and decorated on the Co3O4 nanoflowers assembled by nanowires (PtIr-Co3O4). The encouraging performances in electrochemical OER and hydrogen evolution reaction (HER) are achieved over the PtIr-Co3O4 catalyst, with the overpotentials as low as 410 and 237 mV at 100 mA cm-2, respectively, outperforming the commercial IrO2 and Pt/C catalysts. Due to the ultralow loading of PtIr clusters, the PtIr-Co3O4 catalyst exhibits 1270 A gIr -1 for OER at the overpotential of 400 mV. Our detailed analyses also show that the strong interactions between the ultrafine PtIr clusters and the Co3O4 nanoflowers enable the PtIr-Co3O4 catalyst to afford 10 mA cm-2 for the overall water splitting at the potential of 1.57 V, accompanied by high durability for 100 h.

Enhanced Proximity of Rh1,2-Rhn Ensembles Encaged in UiO-67 Boosting Catalytic Conversion of Syngas to Oxygenates.

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one-pass yields of C2+ oxygenates over the reported Rh-based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO-67 (Rh/UiO-67) with enhanced proximity to dual-site Rh1,2-Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one-pass yield of C2+ oxygenates exceeded 25 %. The state-of-the-art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO-67, providing adjacent Rh+-Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space.

Coordinating Interface Polymerization with Micelle Mediated Assembly Towards Two-Dimensional Mesoporous Carbon/CoNi for Advanced Lithium-Sulfur Battery.

Lithium-sulfur battery has attracted significant attention by virtues of their high theoretical energy density, natural abundance, and environmental friendliness. However, the notorious shuttle effect of polysulfides intermediates severely hinders its practical application. Herein, a novel 2D mesoporous N-doped carbon nanosheet with confined bimetallic CoNi nanoparticles sandwiched graphene (mNC-CoNi@rGO) is successfully fabricated through a coordinating interface polymerization and micelle mediated co-assembly strategy. mNC-CoNi@rGO serves as a robust host material that endows lithium-sulfur batteries with a high reversible capacity of 1115 mAh g-1 at 0.2 C after 100 cycles, superior rate capability, and excellent cycling stability with 679.2 mAh g-1 capacity retention over 700 cycles at 1 C. With sulfur contents of up to 5.0 mg cm-2 , the area capacity remains to be 5.1 mAh cm-2 after 100 cycles at 0.2 C. The remarkable performance is further resolved via a series of experimental characterizations combined with density functional theory calculations. These results reveal that the ordered mesoporous N-doped carbon-encapsulated graphene framework acts as the ion/electron transport highway with excellent electrical conductivity, while bimetallic CoNi nanoparticles enhance the polysulfides adsorption and catalytic conversion that simultaneously accelerate the multiphase sulfur/polysulfides/sulfides conversion and inhibit the polysulfides shuttle.

Visible-light activatable coumarin-based phototriggers for fluorescence imaging with ultra-high photolysis efficiency.

Photoactivated fluorophores (PAFs) are powerful imaging tools for observing subcellular structures and tracking dynamic biological processes. However, photoremovable protecting groups (PPGs) widely used to construct PAFs suffer from the drawbacks of short-wavelength excitation and/or low photolysis efficiency. Herein, a class of coumarin-based PPGs with electron-rich thiophene derived substitutions at the C3-position of a coumarin scaffold were prepared. The modification not only leads to the redshift of the absorption band to the blue light region (400-500 nm), but also the increases of uncaging quantum yield (Φu) as well as molar extinction coefficient (εmax), thus enhancing the photolysis efficiency (Φu × Îµmax) up to 34.2 × 103 M-1 cm-1. The exceptionally high photolysis efficiency enables efficient photolysis in blue light as weak as 2 mW cm-2 or in blue light from a Luminol chemiluminescence system. Based on the excellent photolysis properties, the PAF constructed by the new PPG exhibits fast photoactivation and a low background signal, and the resulting fluorescence images display a signal-to-noise ratio greater than 780. It is anticipated that the superior photolysis performance makes the PPGs a novel platform for the construction of photo responsive systems in a variety of applications.

Acid-catalyzed Disulfide-mediated Reversible Polymerization for Recyclable Dynamic Covalent Materials.

Poly(1,2-dithiolane)s are a family of intrinsically recyclable polymers due to their dynamic covalent disulfide linkages. Despite the common use of thiolate-initiated anionic ring-opening polymerization (ROP) under basic condition, cationic ROP is still not exploited. Here we report that disulfide bond can act as a proton acceptor, being protonated by acids to form sulfonium cations, which can efficiently initiate the ROP of 1,2-dithiolanes and result in high-molecular-weight (over 1000 kDa) poly(disulfide)s. The reaction can be triggered by adding catalytic amounts of acids and non-coordinating anion salts, and completed in few minutes at room temperature. The acidic conditions allow the applicability for acidic monomers. Importantly, the reaction condition can be under open air without inert protection, enabling the nearly quantitative chemical recycling from bulk materials to original monomers.

Unveiling the Surface Structure of ZnO Nanorods and H2 Activation Mechanisms with 17O NMR Spectroscopy.

ZnO plays a very important role in many catalytic processes involving H2, yet the details on their interactions and H2 activation mechanism are still missing, owing to the lack of a characterization method that provides resolution at the atomic scale and follows the fate of oxide surface species. Here, we apply 17O solid-state NMR spectroscopy in combination with DFT calculations to unravel the surface structure of ZnO nanorods and explore the H2 activation process. We show that six different types of oxygen ions in the surface and subsurface of ZnO can be distinguished. H2 undergoes heterolytic dissociation on three-coordinated surface zinc and oxygen ions, while the formed hydride species migrate to nearby oxygen species, generating a second hydroxyl site. When oxygen vacancies are present, homolytic dissociation of H2 occurs and zinc hydride species form from the vacancies. Reaction mechanisms on oxide surfaces can be explored in a similar manner.

Core-Shell Nanostructured Ru@Ir-O Electrocatalysts for Superb Oxygen Evolution in Acid.

The design of highly active and durable catalysts for the sluggish anodic oxygen evolution reaction (OER) in acid remains an urgent yet challenging goal in water electrolysis. Herein, a core-shell nanostructured Ru@Ir-O catalyst with tensile strains and incorporated oxygens is introduced in the Ir shell that holds an extremely low OER overpotential of 238 mV at 10 mA cm-2 in acid. The material also shows a remarkable 78-fold higher mass activity than the conventional IrO2 at 1.55 V in 0.5 M H2 SO4 . Structural characterization and theoretical calculations reveal that the core-shell interaction and tensile strain cause band position shift and charge redistribution. These electronic factors furthermore optimize the bonding strength of O* and HOO* intermediates on the surface, yielding significantly boosted OER activity relative to the conventional IrO2 .

Isolating Single Sn Atoms in CuO Mesocrystal to Form Ordered Atomic Interfaces: An Effective Strategy for Designing Highly Efficient Mesocrystal Catalysts.

Tuning the electronic structures of mesocrystals at the atomic level is an effective approach to obtaining unprecedented properties. Here, a lattice-confined strategy to obtain isolated single-site Sn atoms in CuO mesocrystals to improve catalytic performance is reported. The Sn/CuO mesocrystal composite (Sn/CuO MC) has ordered Sn-O-Cu atomic interfaces originated from the long-range ordering of the CuO mesocrystal itself. X-ray absorption fine structure measurements confirm that the positively charged Sn atoms can tune the electronic structure of the Cu atoms to some extent in Sn/CuO MC, quite different from that in the conventional single-atom Sn-modified CuO nanoparticles and nanoparticulate SnO2 -modified CuO mesocrystal catalysts. When tested for the Si hydrochlorination reaction to produce trichlorosilane, Sn/CuO MC exhibits significantly better performances than the above two catalysts. Theoretical calculations further reveal the electronic modification to the active Cu component and the induced improvement in HCl adsorption, and thus enhance the catalytic performance. This work demonstrates how to design efficient metal oxide mesocrystal catalysts through an electronic structure modification approach.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study.

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO2(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO2(111). Moreover, two different pathways for the dehydrogenation of CH3OH to HCHO on the Pd-doped CeO2(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH3OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH3OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd4+ to Pd2+ through the transfer of two electrons can outperform the separated Ce4+ to Ce3+ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.

Increasing the Distance of Adjacent Palladium Atoms for Configuration Matching in Selective Hydrogenation.

Precisely tailoring the distance between adjacent metal sites to match adsorption configurations of key species for the targeted reaction pathway is a great challenge in heterogeneous catalysis. Here, we report a proof-of-concept study on the atomically sites-tailored pathway in Pd-catalyzed acetylene hydrogenation, i.e., increasing the distance of adjacent Pd atoms (dPd-a-Pd ) for configuration matching in acetylene semi-hydrogenation against coupling. dPd-a-Pd is identified as a structural descriptor for describing the competitiveness for reaction pathways, and the increased dPd-a-Pd prefers the semi-hydrogenation pathway due to simultaneously promoted C2 H4 desorption and the destabilized transition state of the C2 H3 * coupling. Spectroscopic, kinetics and electronic structure studies reveal that increasing dPd-a-Pd to 3.31 Šdelivers superior selectivity and stability due to energy matching and appropriate hybridization of Pd 4d with In 2s and, especially, 2p orbitals.

Interaction of Hydrogen with Ceria: Hydroxylation, Reduction, and Hydride Formation on the Surface and in the Bulk.

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2 ) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2 (111) thin films and CeO2 powders, and theoretical calculations of CeO2 (111) surfaces with oxygen vacancies (Ov ) at the surface and in the bulk. We show that, on a stoichiometric CeO2 (111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO2-x samples, both films and powders, hydroxyls and hydrides (Ce-H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ ↔ Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H2 /CeO2 interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.

Role of Organic Fluoride Salts in Stabilizing Niobium Oxo-Clusters Catalyzing Epoxidation.

We present here that easily available organic salts can stabilize/modify niobium (Nb) oxo-clusters. The as-synthesized Nb oxo-clusters have been characterized by various methods. These Nb oxo-clusters were catalytically active for the epoxidation of allylic alcohols and olefins with H2O2 as an oxidant. Notably, Nb-OC@TBAF-0.5 appeared as highly dispersed nanosized particles and showed the highest catalytic activity, which can be attributed to the following reasons on the basis of characterization. First, the strong coordination of fluorine ions with Nb sites and the steric protection with bulky organic cations led to high stabilization and dispersion of the oxo-clusters in the course of the reaction. Second, a hydrogen-bond interaction between the coordinated fluorine atom and the -OH group of allylic alcohol favored the epoxidation reaction. Third, the electron density of Nb sites decreased due to the strong electron-withdrawing ability of F- adjacent to Nb sites, thus promoting the electrophilic oxygen transfer to the C═C bond.

Subtle structure matters: boosting surface-directed photoelectron transfer via the introduction of specific monovalent oxygen vacancies in TiO2.

Oxygen vacancies (Ov) are widely considered to play crucial roles in photocatalysis, but how and why they contribute to improved performances remains controversial. In this work, we studied the promotional effect of Ov on photoelectron transfer in TiO2, using first-principles density functional theory calculations with correction for on-site Coulomb interactions. We explicitly identified three types of Ov with different charge states (i.e., charge-neutral , monovalent , divalent Ov2+) via electronic structure analysis. Electron transfer energy calculations revealed that the ionized Ov in anatase TiO2 are able to collect excess electrons whereas those in the rutile phase are not. The presence of ionized Ov further endows anatase TiO2 with directional electron transfer along the [100] orientation, in favor of anatase TiO2(101) for photocatalytic reduction surpassing the (001) termination. After examining various combination modes of ionized Ov involving different charge states and spatial distributions, we demonstrated that the vertical chain in anatase TiO2(101) is the most catalytically effective Ov pattern in TiO2. These results signify the importance of subtle defects in photocatalysis and may assist future photocatalyst design toward higher photocatalytic efficiency.

Photo-induced hydrophilicity at the ZnO(112̄0) surface: an evolutionary algorithm-aided density functional theory study.

Evolutionary algorithm-aided density functional theory calculations were utilized to determine the stable adsorption structures of H2O at ZnO(112̄0) extensively under different coverages. By decomposing the adsorption energetics, we illustrate that H2O dissociation to a large extent is actually hampered by the barrier for induced distortion of the ZnO surface, and once the surface becomes less difficult to be distorted it will exhibit higher hydrophilicity or even superhydrophilicity. Specifically, photo-stimulation modelling suggests that the surface Zn-O bonds can be weakened by photo-excitation, and the layer of fully dissociated H2O can be then facilitated to form. Accordingly, a novel mechanism for photo-induced superhydrophilicity is proposed.

Site Sensitivity of Interfacial Charge Transfer and Photocatalytic Efficiency in Photocatalysis: Methanol Oxidation on Anatase TiO2 Nanocrystals.

Photocatalytic oxidation of methanol on various anatase TiO2 nanocrystals was studied by in situ and time-resolved characterizations and DFT calculations. Surface site and resulting surface adsorbates affect the surface band bending/bulk-to-surface charge migration processes and interfacial electronic structure/interfacial charge transfer processes. TiO2 nanocrystals predominantly enclosed by the {001} facets expose a high density of reactive fourfold-coordinated Ti sites (Ti4c ) at which CH3 OH molecules dissociate to form the CH3 O adsorbate (CH3 O(a)Ti4c ). CH3 O(a)Ti4c localized density of states are almost at the valence band maximum of TiO2 surface, facilitating the interfacial hole transfer process; CH3 O(a)Ti4c with a high coverage promotes upward surface band bending, facilitating bulk-to-surface hole migration. CH3 O(a)Ti4c exhibits the highest photocatalytic oxidation rate constant. TiO2 nanocrystals enclosed by the {001} facets are most active in photocatalytic methanol oxidation.

Boosting Interfacial Charge-Transfer Kinetics for Efficient Overall CO2 Photoreduction via Rational Design of Coordination Spheres on Metal-Organic Frameworks.

The recombination of electron-hole pairs severely detracts from the efficiency of photocatalysts. This issue could be addressed in metal-organic frameworks (MOFs) through optimization of the charge-transfer kinetics via rational design of structures at atomic level. Herein, a pyrazolyl porphyrinic Ni-MOF (PCN-601), integrating light harvesters, active catalytic sites, and high surface areas, has been demonstrated as a superior and durable photocatalyst for visible-light-driven overall CO2 reduction with H2O vapor at room temperature. Kinetic studies reveal that the robust coordination spheres of pyrazolyl groups and Ni-oxo clusters endow PCN-601 with proper energy band alignment and ultrafast ligand-to-node electron transfer. Consequently, the CO2-to-CH4 production rate of PCN-601 far exceeds those of the analogous MOFs based on carboxylate porphyrin and the classic Pt/CdS photocatalyst by more than 3- and 20-fold, respectively. The reaction avoids the use of hole scavengers and proceeds in a gaseous phase which can take full advantage of the high gas uptake of MOFs. This work demonstrates that the rational design of coordination spheres in MOF structures not only reconciles the contradiction between reactivity and stability but also greatly promotes the interfacial charge transfer to achieve optimized kinetics, providing guidance for the design of highly efficient MOF photocatalysts.

Interactions of Oxide Surfaces with Water Revealed with Solid-State NMR Spectroscopy.

Hydrous materials are ubiquitous in the natural environment and efforts have previously been made to investigate the structures and dynamics of hydrated surfaces for their key roles in various chemical and physical applications, with the help of theoretical modeling and microscopy techniques. However, an overall atomic-scale understanding of the water-solid interface, including the effect of water on surface ions, is still lacking. Herein, we employ ceria nanorods with different amounts of water as an example and demonstrate a new approach to explore the water-surface interactions by using solid-state NMR in combination with density functional theory. NMR shifts and relaxation time analysis provide detailed information on the local structure of oxygen ions and the nature of water motion on the surface: the amount of molecularly adsorbed water decreases rapidly with increasing temperature (from room temperature to 150 °C), whereas hydroxyl groups are stable up to 150 °C, and dynamic water molecules are found to instantaneously coordinate to the surface oxygen ions. The applicability of dynamic nuclear polarization for selective detection of surface oxygen species is also compared to conventional NMR with surface selective isotopic-labeling: the optimal method depends on the feasibility of enrichment and the concentration of protons in the sample. These results provide new insight into the interfacial structure of hydrated oxide nanostructures, which is important to improve performance for various applications.

Clarifying the impacts of surface hydroxyls on CO oxidation on CeO2(100) surfaces: a DFT+U study.

In heterogeneous catalysis, surface hydroxylation is well recognized as a common phenomenon under realistic reaction conditions. However, even for the versatile ceria-based materials that have attracted extensive studies, the results and causes of the hydroxyl effect on the catalytic reactivity remain largely elusive. In this work, density functional theory calculations corrected by on-site Coulomb interaction were conducted to clarify the CO oxidation pathways and also the impacts of surface hydroxyls on the catalytic performance at the two most stable reconstructions of CeO2(100). It is found that the presence of hydroxyl groups can boost the CO oxidation activity on the O-terminal surface but shows an opposite effect on the CeO4-terminal one. Further analyses regarding the structural distortions, electronic structures and orbital interactions reveal that the stretched Ce-O distance via in-plane hydrogen bonds and the electron redistributions induced by additional hydroxyl coordination are the main reasons for the different hydroxyl effects on the O- and CeO4-terminal surfaces. Our results not only uncover the dual-character of surface hydroxyls in heterogeneous catalysis, but they also underline the significance of moderate moisture in the reaction system that may endow ceria catalysts with both good thermostability and high catalytic activity.

Methanol Synthesis at a Wide Range of H2 /CO2 Ratios over a Rh-In Bimetallic Catalyst.

There is increasing interest in capturing H2 generated from renewables with CO2 to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO2 . Excess CO2 and limited H2 in the feedstock gas is not favorable for CO2 hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh-In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh-In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water-gas shift reaction under H2 -deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh-In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H2 /CO2 from biomass derivatives) with lower energy cost can be established.