Cone-beam computed tomography airway measurements: Can we trust them?

INTRODUCTION: Pharyngeal airway space (PAS) assessment has been used in the past for a better understanding of orthodontic and surgical outcomes; however, this analysis could be unreliable. Our objective was to evaluate possible changes in the PAS reading in the same patient from their consecutive cone-beam computed tomography (CBCT) scans. METHODS: We evaluated a total of 27 patients' CBCT scans obtained at 2 time points with the use of a standardized acquisition protocol. The mean age at T0 was 31 years (range 17-62 years) and the follow-up records (T1) were taken after 4-6 months. Dolphin Imaging software was used to measure the volumes of the nasopharynx, oropharynx, and hypopharynx. We also evaluated the craniocervical position with the use of a lateral cephalogram. RESULTS: The variables exhibited high intraclass correlation coefficients (ICCs) when measuring the same CBCT scan twice (T0 and T0). However, The ICC between the measurements performed on the first and second CBCT scans (T0 and T1) showed that the only variable with high reproducibility between the 2 scans was cranial base, with an ICC >0.97. Average differences of 682.1 mm3, 2255.3 mm3, and 517.4 mm3 were found for the nasopharynx, oropharynx, and hypopharynx, respectively. Regarding the cephalometric angles, average differences between T0 and T1 scans were 0.6°, 2.7°, and 0.4° for OPT.CVT, OPT.SN, and cranial base, respectively. CONCLUSIONS: Different CBCT exams with equal scanning and patient positioning protocols can result in different 3D PAS readings. A more careful interpretation of CBCT volumetric data to achieve adequate conclusions of the clinical outcomes is necessary.

Maxillary Interdental Osteotomies Have Low Morbidity for Alveolar Crestal Bone and Adjacent Teeth: A Cone Beam Computed Tomography-Based Study.

PURPOSE: Maxillary segmentation involving interdental osteotomies can have an adverse effect on the interdental crestal bone and adjacent teeth. The purpose of the present study was to evaluate the effect of interdental osteotomies on surrounding osseous and dental structures, including adjacent teeth, using cone beam computed tomography (CBCT), in patients who underwent segmental maxillary osteotomies. PATIENTS AND METHODS: The present retrospective cohort study evaluated interdental osteotomy (IDO) sites between the lateral incisors and canines in patients treated with 3-piece Le Fort I osteotomies. CBCT scans were assessed using Kodac Dental Imaging software at specific intervals: T0 (before surgery), T1 (immediately after surgery), and T2 (a minimum of 11 months after surgery). The statistical analysis using a linear regression model was adjusted to compare the variables at the different intervals. Injury to the dental structures was assessed by radiological evidence of dental damage, the requirement for endodontic treatment, or tooth loss. RESULTS: We evaluated 94 IDO sites in 47 patients in the present study. The mean inter-radicular distance at T0 was 2.5 mm. A statistically significant increase was seen in the inter-radicular distance (between T1 and T0) of 0.72 mm, with a reduction of the alveolar bone crest height (between T2 and T0) of 0.19 mm (P < .001) for the group that underwent IDO. A weak correlation was found for this increase in the inter-radicular distance, with changes in the alveolar crest bone height. The potential complications associated with interdental osteotomies such as iatrogenic damage to the tooth structure, the need for endodontic treatment, and tooth loss were not encountered in any patients. CONCLUSIONS: We found very low morbidity for the interdental alveolar crest and the integrity of teeth adjacent to interdental osteotomies for patients who underwent maxillary segmentation between the lateral incisors and canines.

Effect of temporomandibular joint articular disc repositioning on anterior open-bite malocclusion: An orthodontic-surgical approach.

An anterior open bite is a challenge to orthodontic treatment; it has a multifactorial etiology and a wide range of intervention options. Temporomandibular joint (TMJ) disorders are a risk factor for the development of malocclusions such as the anterior open bite, especially in patients who have TMJ osteoarthritis with disc displacement. Articular disc repositioning surgery is an available option for treating this pathology, and it contributes to maintaining the condyles in a more stable position. The aim of this article was to report the case of a 20-year-old woman diagnosed with anterior open bite and TMJ osteoarthritis with bilateral disc displacement. The patient received both orthodontic treatment and TMJ disc repositioning surgery. Cone-beam computed tomography was used to create 3-dimensional models of the condyles with regional superposition, and assessment of bone remodeling was performed at different time intervals. Complete orthodontic and surgical treatment time was approximately 12 months. The results provided a stable correction of the patient's anterior open bite with a 2-year follow-up and favorable bone remodeling of the condyles due to functional improvement of the TMJ.

Is three-piece maxillary segmentation surgery a stable procedure?

Objective: : The number of three-piece maxillary osteotomies has increased over the years; however, the literature remains controversial. The objective of this study was to evaluate the skeletal stability of this surgical modality compared with that of one-piece maxillary osteotomy. Methods: : This retrospective cohort study included 39 individuals who underwent Le Fort I maxillary osteotomies and were divided into two groups: group 1 (three pieces, n = 22) and group 2 (one piece, n = 17). Three cone-beam computed tomography scans from each patient (T1, pre-surgical; T2, post-surgical; and T3, follow-up) were used to evaluate the three-dimensional skeletal changes. Results: : The differences within groups were statistically significant only for group 1 in terms of surgical changes (T2-T1) with a mean difference in the canine region of 3.09 mm and the posterior region of 3.08 mm. No significant differences in surgical stability were identified between or within the groups. The mean values of the differences between groups were 0.05 mm (posterior region) and -0.39 mm (canine region). Conclusions: : Our findings suggest that one- and three-piece maxillary osteotomies result in similar post-surgical skeletal stability.

Three-dimensional stability analysis of maxillomandibular advancement surgery with and without articular disc repositioning.

This retrospective cohort study aimed to assess, three-dimensionally, mandible and maxilla changes following maxillomandibular advancement (MMA), with and without repositioning of TMJ articular discs. The sample comprised cone-beam computed tomography data from 32 subjects: group 1 (n = 12) without disc displacement and group 2 (n = 20) with bilateral disc repositioning. An automatic cranial base superimposition method was used to register the images at three time points: T1 (preoperative), T2 (postoperative), and T3 (at least 11 months follow-up). To assess surgical changes (T2-T1) and adaptive responses (T3-T2), the images were compared quantitatively and qualitatively using the shape correspondence method. The results showed that surgical displacements were similar in both groups for all the regions of interest except the condyles, which moved in opposite directions - group 1 to superior and posterior positions, and group 2 to inferior and anterior positions. For adaptive responses, we observed high individual variability, with lower variability in group 2. Sagittal relapse was similar in both groups. In conclusion, there were no significant differences in skeletal stability between the two groups. The maxillomandibular advancement surgeries, with rotation of the occlusal plane, had stable results for both groups immediately after surgery and at 1-year follow-up.

Surface properties and color stability of an acrylic resin combined with an antimicrobial polymer / Propriedades de superfície e estabilidade de cor de uma resina acrílica combinada com um polímero antimicrobiano

Introduction: The occurrence of stomatitis is common since the surface characteristics of the dentures may act as reservoirs for microorganisms and have the potential to support biofilm formation. Purpose: To assess the surface properties (wettability/roughness) and color stability of an acrylic resin combined with the antimicrobial polymer poly (2-tert-butylaminoethyl) methacrylate (PTBAEMA). Material and Method: Thirty disc-shaped specimens of an acrylic resin (Lucitone 550) were divided into three groups: 0% (control); 5% and 10% PTBAEMA. Surface roughness values (Ra) were measured using a profilometer and wettability was determined through contact angle measurements using a goniometer and deionized water as a test liquid. Color data were measured with a spectrophotometer. Kruskal-Wallis and Dunn's test were used to compare roughness values. Wettability data were analyzed using ANOVA and Tukey's test. Color data were compared using the Student's t-test and ∆E values were classified according to the National Bureau of Standards (NBS). All statistical analyses were performed considering α=.05. Result: Significant differences (p<.05) were detected among the groups for roughness, wettability and color stability. According to the NBS, the color changes obtained in the 5% and 10% PTBAEMA groups were "appreciable" and "much appreciable", respectively. Conclusion: It could be concluded that PTBAEMA incorporation in an acrylic resin increased the roughness and wettability of surfaces and produced color changes with clinical relevance.

Introdução: A ocorrência de estomatite protética é relativamente comum uma vez que as superfícies das próteses bucais representam um ambiente propício para adesão de microrganismos orais e formação de biofilme. Objetivo: Avaliar as propriedades de superfície (molhabilidade/rugosidade) e estabilidade de cor de uma resina acrílica combinada com o polímero antimicrobiano poli (2-tert-butilaminoetil) metacrilato (PTBAEMA). Material e Método: Trinta espécimes em formato de disco de uma resina acrílica (Lucitone 550) foram divididos em três grupos: 0% (controle), 5% e 10% PTBAEMA. Os valores de rugosidade (Ra) foram medidos utilizando um rugosímetro, e a molhabilidade foi determinada através de medições de ângulo de contato utilizando um goniômetro e água deionizada como líquido teste. Dados de cores foram medidos com um espectrofotômetro. Os testes de Kruskal-Wallis e Dunn foram utilizados para comparar os valores de rugosidade. Os dados de molhabilidade foram analisados utilizando-se ANOVA e teste de Tukey. Os dados de cor foram comparados com o teste t de Student e valores ΔE foram classificados de acordo com o National Bureau of Standards (NBS). Todas as análises estatísticas foram realizadas considerando α= 0,05. Resultado: Diferenças significativas (p<0,05) foram detectadas entre os grupos para rugosidade, molhabilidade, e estabilidade de cor. De acordo com o NBS, as alterações de cor obtidas nos grupos 5% e 10% PTBAEMA foram "marcante" e "extremamente marcante", respectivamente. Conclusão: Pode-se concluir que a incorporação de PTBAEMA em uma resina acrílica aumentou a rugosidade e molhabilidade das superfícies e produziu alterações de cor com relevância clínica.