Suppressed Droplet Splashing on Positively Skewed Surfaces for High-Efficiency Evaporation Cooling.

Two types of functional surfaces with the same roughness but completely different surface topographies are prepared, namely positively skewed surfaces filled with micropillar arrays (Sa ≈4.4 µm, Ssk >0) and negatively skewed surfaces filled with microcavity arrays (Sa ≈4.4 µm, Ssk <0), demonstrating promoting droplet splashing. Remarkably, the critical Weber number for generating satellite droplets on the negatively skewed surfaces is significantly lower than that on the positively skewed surfaces, indicating that the negatively skewed surface with microcavity arrays is more likely to promote droplet splashing. It is mainly attributed to the fact that air on the negatively skewed surface can make the liquid film take on a Cassie-Baxter state on the surface so that the stabilizing capillary force of the liquid film exceeds the destabilizing stress of the air film. Moreover, the surface topography promoting droplet spreading and the mechanical properties of three-phase moving contact lines are analyzed from the perspective of microscopic interface mechanics. Finally, it is demonstrated the designed positively skewed surfaces can be employed for large-area heat dissipation by means of high-efficiency evaporation.

Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface.

In this study, we examined how surface topography and particle medium interact to affect the tribological performance of rubber sliding interfaces, uncovering the mechanisms of particle lubrication under various conditions. We found that microtextured surfaces, created using a mold transfer method, modestly reduced the friction coefficient of rubber under both dry and lubricated states, primarily by altering the real contact area. Additionally, the presence of different microconvex textures on the surface topography significantly influenced rubber's tribological properties. Our three-dimensional morphological analysis revealed that microtextured rubber surfaces with higher Sa, Sku, and Sal and lower Str values consistently showed lower friction coefficients during sliding. The friction mechanism was attributed to the combined effects of the material properties, surface topography, and contact area. With the addition of a particle medium, the dry friction coefficient of the rubber interface decreased but exhibited an initial increase, followed by a decrease with increasing particle diameter. When particles were mixed with a water-based cutting fluid, the concentration, diameter, and wettability of the particles significantly impacted the tribological properties due to the synergistic effects of surface topography and particle lubrication. This work enhances our understanding of tribological control for viscoelastic materials through surface design, providing a theoretical basis for the tribological optimization of rubber surfaces.

Armored Superhydrophobic Surfaces with Excellent Drag Reduction in Complex Environmental Conditions.

Superhydrophobic surfaces (SHSs) have possibilities for achieving significantly reduced solid-liquid frictional drag in the marine sector due to their excellent water-repelling properties. Although the stability of SHSs plays a key role in drag reduction, little consideration was given to the effect of extreme environments on the ability of SHSs to achieve drag reduction underwater, particularly when subjected to acidic conditions. Here, we propose interconnected microstructures to protect superhydrophobic coatings with the aim of enhancing the stability of SHSs in extreme environments. The stability of armored SHSs (ASHSs) was demonstrated by the contact angle and bounce time of droplets on superhydrophobic surfaces treated by various methods, resulting in an ASHS surface with excellent stability under extreme environmental conditions. Additionally, inspired by microstructures protecting superhydrophobic nanomaterials from frictional wear, the armored superhydrophobic spheres (ASSPs) were designed to explain from theoretical and experimental perspectives why ASSPs can achieve sustainable drag reduction and demonstrate that the ASSPs can achieve drag reduction of over 90.4% at a Reynolds number of 6.25 × 104 by conducting water entry experiments on spheres treated in various solutions. These studies promote a fundamental understanding of what drives the application of SHSs under extreme environmental conditions and provide practical strategies to maximize frictional drag reduction.

Effect of the Surface Peak-Valley Features on Droplet Impact Dynamics under Leidenfrost Temperature.

This study explores the kinetic behavior of droplets impacting microtextured surfaces under a Leidenfrost temperature, employing high-speed photography and picosecond laser micromachining techniques. The investigation focuses on two types of microtextured surfaces with totally different surface peak-valley features: a negatively skewed surface with micropit arrays (Ssk < 0) and a positively skewed surface with micropillar arrays (Ssk > 0). The results indicate that both microtextured surfaces contribute to a higher Leidenfrost temperature compared with the original smooth surface, which is consistent with previous studies. However, it is worth noting that the Leidenfrost points of the micropit and micropillar surfaces showed opposite trends with the microtexture area occupancy. Specifically, the Leidenfrost temperature on micropit surfaces increases with greater micropit area occupancy, while it decreases on micropillar surfaces under similar conditions, which is mainly attributed to the differential impact of area occupancy on droplet heat transfer efficiency. When the microtexture area occupancy is 50%, it is worth noting that the micropit and micropillar surfaces have nearly same roughness (Sa), but the Leidenfrost temperature was notably higher on the micropit surface with negative skewness (Ssk < 0), which was related to differences in vapor flow dynamics. We further find that the Weber number (We) significantly influences the Leidenfrost point, with the droplet impact wall behavior going through the states of film bounce back, ejecting tiny droplets and bounce back, and ultimately droplet breakup as the We increases. The dynamic Leidenfrost point was found to be generally higher than the static point and increases with the We. Finally, we compare the cooling efficiency of these surfaces, and it is found that the micropit surfaces with a negative skewness exhibit superior heat dissipation performance under the same conditions, which proved that the negatively skewed surface may have great potential in high-density heat dissipation technology.

Lanthanum interferes with the fundamental rhythms of stomatal opening, expression of related genes, and evapotranspiration in Arabidopsis thaliana.

The accumulation of rare earth elements (REEs) in the global environment poses a threat to plant health and ecosystem stability. Stomata located on leaves serve as the primary site for plant responses to REE-related threats. This study focused on lanthanum [La(III)], a prevalent REE in the atmospheric environment. Using interdisciplinary techniques, it was found that La(III) (≤80 µM) interfered with the fundamental rhythms of stomatal opening, related gene expression, and evapotranspiration in plants. Specifically, when exposed to low concentrations of La(III) (15 and 30 µM), the expression levels of six genes were increased, stomatal opening was enhanced, and the evapotranspiration rate was accelerated. The interference on stomatal rhythms was enhanced with higher concentrations of La(III) (60 and 80 µM), increasing the expression levels of six genes, stomatal opening, and evapotranspiration rate. To counter the interference of low concentrations of La(III) (15 and 30 µM), plants accelerated nutrient replenishment through La(III)-induced endocytosis, which the redundant nutrients enhanced photosynthesis. However, replenished nutrients failed to counter the disruption of plant biological rhythms at higher concentrations of La(III) (60 and 80 µM), thus inhibiting photosynthesis due to nutrient deficit. The interference of La(III) on these biological rhythms negatively affected plant health and ecosystem stability.

Delayed Leidenfrost Effect of a Cutting Droplet on a Microgrooved Tool Surface.

Regulation over the generation of the Leidenfrost phenomenon in liquids is vitally important in a cutting fluid/tool system, with benefits ranging from optimizing the heat transfer efficiency to improving the machining performance. However, realizing the influence mechanism of liquid boiling at various temperatures still faces enormous challenges. Herein, we report a kind of microgrooved tool surface by laser ablation, which could obviously increase both the static and dynamic Leidenfrost point of cutting fluid by adjusting the surface roughness (Sa). The physical mechanism that delays the Leidenfrost effect is primarily due to the ability of the designed microgroove surface to store and release vapor during droplet boiling so that the heated surface requires higher temperatures to generate sufficient vapor to suspend the droplet. We also find six typical impact regimes of cutting fluid under various contact temperatures; it is worth noting that Sa has a great influence on the transform threshold among six impact regimes, and the likelihood that a droplet will enter the Leidenfrost regime decreases with increasing Sa. In addition, the synergistic effect of Sa and tool temperature on the droplet kinetics of cutting droplets is investigated, and the relationship between the maximum rebound height and the dynamic Leidenfrost point is correlated for the first time. Significantly, cooling experiments on the heated microgrooved surface are performed and demonstrate that it is effective to improve the heat dissipation ability of cutting fluid by delaying the Leidenfrost effect on the microgrooved heated surface.

Dynamic Behavior of Droplet Impact on Laminar Superheated Particles.

The impact of droplets on particles involves a wide range of complex phenomena and mechanisms, including bubble nucleation, crater formation, fluidization, and more intricate changes in the boiling regime when impacting superheated particles. In this study, we focus on droplet impact behavior on superheated laminar particles at various temperatures and define six typical characteristic patterns of a single droplet impact on superheated laminar particles, including film evaporation, bubbly boiling, immersion boiling, sputter boiling, transition boiling, and film boiling. It is worth noting that the variations of inertial force FI caused by gravity, the capillary force FC generated by the pores of the droplets, and the dewetting force by the vapor phase FV are the main contributors to different evaporation regimes. Interestingly, we find that the Leidenfrost point (LFP) of droplets on the laminar superheated particles decreases with particle size, which is related to the effect of the pore space generated between the laminar particles. Finally, the effect of temperature, particle size, and Weber number (We) on the dynamic behavior of droplet impact is revealed. Experimental results show that the instantaneous diameter of droplets is inversely proportional to the change of height, with different patterns of maximum spreading diameter and maximum bounce height at different particle sizes, while the maximum spreading velocity and maximum bounce velocity are independent of particle size. We believe the present work would provide a broader knowledge and comprehension of the droplet impact on heated particles and promote the development of the safety and productivity of industrial processes such as fluid catalytic cracking, spray drying, and spray cooling.

Active Droplet Transport Induced by Moving Meniscus on a Slippery Magnetic Responsive Micropillar Array.

Intelligent droplet manipulation plays a crucial role in both scientific research and industrial technology. Inspired by nature, meniscus driving is an ingenious way to spontaneously transport droplets. However, the shortages of short-range transport and droplet coalescence limit its application. Here, an active droplet manipulation strategy based on the slippery magnetic responsive micropillar array (SMRMA) is reported. With the aid of a magnetic field, the micropillar array bends and induces the infusing oil to form a moving meniscus, which can attract nearby droplets and transport them for a long range. Significantly, clustered droplets on SMRMA can be isolated by micropillars, avoiding droplet coalescence. Moreover, through adjusting the arrangement of the micropillars of SMRMA, multi-functional droplet manipulation such as unidirectional droplet transport, multi-droplet transport, droplet mixing, and droplet screening can be achieved. This work provides a promising approach for intelligent droplet manipulation and unfolds broad application prospects in microfluidics, microchemical reaction, biomedical engineering, and other fields.

Magnetic-Actuated Robot Enables High-Performance Underwater Bubble Maneuvering on Laser-Textured Biomimetic Slippery Surfaces.

Controllable underwater gas bubble (UGB) transport on a surface is realized by geography-/stimuli-induced wettability gradient force (Fwet-grad). Unfortunately, the high-speed maneuvering of UGBs along free routes on planar surfaces remains challenging. Herein, a regime of magnetism-actuated robot (MAR) mounting on biomimetic laser-ablated lubricant-impregnated slippery surfaces (LA-LISS) is reported. Leveraging on LA-LISS, MAR-entrained UGBs can move along arbitrary directions through the loading of a tracing magnetic trigger. The underlying hydrodynamics is that MAR-entrained UGBs would be actuated slipping upon a giant magnetic-induced towing force (FM//). Once the magnetism stimuli is discharged, FM// vanishes immediately to immobilize the UGBs on LA-LISS. Thanks to the MAR's robust bubble affinity, a typical UGB (20 µL) on the optimized LA-LISS can be accelerated at 500 mm/s2 and gain an ultrafast velocity of over 205 mm/s that far exceeds previously reported figures. Moreover, fundamental physics renders MAR antibuoyancy, steering locomotive UGBs on the inclined LA-LISS. Significantly, an MAR propelling UGBs to configure desirable patterns, realize on-demand coalescence, remedy the cutoff switch, as well as facilitate a programmable light-control-light optical shutter is successfully deployed. Compared with previous smart surfaces, the current multifunctional regime is more competent for harnessing UGBs featuring an unparalleled transport velocity independent of the feeble Fwet-grad.

Functional Microtextured Superhydrophobic Surface with Excellent Anti-Wear Resistance and Friction Reduction Properties.

The wear-resistant superhydrophobic (SHB) surfaces with excellent water-repellency ability were prepared by constructing a microtextured armor on an aluminum surface. With the assistance of laser-induced microtextures, the SHB surface could keep a longer water-repellency ability and a lower friction coefficient even after repeated friction tests under different loads and at different speeds. The mechanism of microtexture-protecting SHB coating is revealed based on both theoretical and elemental analysis. Additionally, we explore the relationship between the three-dimensional topography parameters (ISO 25178) and variation of water contact angles under different test recycles. The results show that the rough surface with appropriate Sa and higher Sku exhibits a better wear resistance, which is mainly related to the storing ability of SHB coating inside the microtextures. Moreover, the surface with appropriate Str exhibits excellent wear resistance, which is mainly associated with better chip-removal ability. Finally, the tribological properties of the microtextured SHB surface are researched. It is worth noting that compared with the microtextured surface without SHB coating and the SHB-coated surface without microtextures, the microtextured SHB surface has the lowest friction coefficient under dry friction because the SHB coating would largely decrease the surface energy of the interface, so the adhesion friction decreases. The microtexture armor on the surfaces would protect the wear of SHB coating, so the SHB coating inside the microtexture could continuously play the role of a particle lubricant at the sliding interface and decrease the friction force of the sliding interface. We believe that the present study would contribute to the further understanding of the constructing mechanism of anti-wear SHB surfaces and provide a new strategy for topography design of engineering surfaces with friction reduction properties.

Meniscus-Induced Directional Self-Transport of Submerged Bubbles on a Slippery Oil-Infused Pillar Array with Height-Gradient.

Directional manipulation of submerged bubbles is fundamental for both theoretical research and industrial production. However, most current strategies are limited to the upward motion direction, complex surface topography, and additional apparatuses. Here, we report a meniscus-induced self-transport platform, namely, a slippery oil-infused pillar array with height-gradient (SOPAH) by combining femtosecond laser drilling and replica mold technology. Owing to the unbalanced capillary force and Laplace pressure difference, bubbles on SOPAH tend to spontaneously transport along the meniscus gradient toward a higher elevation. The self-transport performances of bubbles near the pillars depend on the complex meniscus shape. Significantly, to understand the underlying transport mechanism, the 3D meniscus profile is simulated by solving the Young-Laplace equation. It is found that the concave valleys formed between the adjacent pillars can change the gradient direction of the meniscus and lead to the varied transport performances. Finally, by taking advantage of a water electrolysis system, the assembled SOPAH serving as a bubble-collecting device is successfully deployed. This work should not only bring new insights into the meniscus-induced self-transport dynamics but also benefit potential applications in the field of intelligent bubble manipulation.

Bioinspired Geometry-Gradient Metal Slippery Surface by One-Step Laser Ablation for Continuous Liquid Directional Self-Transport.

Liquid directional self-transport on the functional surface plays an important role in both industrial and academic fields. Inspired by the natural cactus spine and pitcher plant, we have successfully designed a kind of geometry-gradient slippery surface (GGSS) based on aluminum alloy materials which could actively achieve directional self-movement and also antigravity self-movement of various liquid droplets by topography gradient. The mechanism of liquid directional self-transport was theoretically explored through the mechanical analysis of the triple contact line, which was mainly related to the competition between the driven force induced by Laplace pressure and the adhesive force induced by viscous resistance. The adhesive force between the droplet and the surface was quantitatively measured using a homemade experimental apparatus and the results showed that the lateral adhesive force on the GGSS is much smaller than that on the original surface. Additionally, a series of quantitative experiments were conducted to explore the influence of droplet volume and vertex angle on the transport distance and velocity. Finally, we achieved the antigravity self-transport of the droplet on the inclined GGSS to further verify the self-transport ability of the GGSS. We believe that the proposed GGSS with liquid directional self-transport ability in the present work would provide some potential opportunities in modern tribo-systems to optimize the lubricating qualities, especially the lubrication and friction at the extreme contact interface.

In Situ Tuning Underwater Bubble Movement on Slippery Lubricant-Infused Anisotropic Microgrooved Surface by Unidirectional Mechanical Strain.

Numerous studies have focused on designing and fabricating functional interfaces that control movement behavior of underwater gas bubbles, which are ubiquitous in a variety of natural and industrial settings. Nevertheless, developing surfaces with in situ tunable bubble movement remain elusive because of current complicated tuning strategies on the specific materials. Inspired by natural pitcher plant and rice leaves, here we report a kind of slippery lubricant-infused anisotropic microgrooved surface (SLI-AMGS) fabricated by femtosecond laser direct writing technology and realize the in situ reversible switching between underwater bubble sliding and pinning by unidirectional mechanical tensile strain. Different experimental parameters including lubricant oil film thickness, bubble volumes and laser power have been researched to manifest the relationship with bubble sliding behaviors. The underlying mechanism of in situ reversible switching mainly lies on the decrease of the lubricant oil film thickness during the process of mechanical stretching in which the uniform and stable oil film layer becomes uneven. This uneven lubricant oil film results in an extraordinary increase of contact angle hysteresis and resistance. At last, we demonstrate a real-time dynamic modulation of the underwater bubble on the SLI-AMGS with a changing mechanical tensile strain for several repeatable times in different acid-based environments. Our work manifests great potential applications in widespread fields including underwater bubble microfluidics and microbubble robots.

Lateral and Normal Capillary Force Evolution of a Reciprocating Liquid Bridge.

Capillary forces of a shearing liquid bridge can significantly affect the friction and adhesion of interacting surfaces, but the underlying mechanisms remain unclear. We custom built a surface force apparatus (SFA, ±2 µN) equipped with in situ optical microscopy and performed normal and lateral force measurements on a reciprocating water bridge formed between two flat plates. A modified wedge method was developed to correct the unique force measurement errors caused by the changing bridge geometry and position. The results found (1) strong linear relations among the bridge shear displacement, the cosine difference between the left and right contact angles, and the lateral adhesion force and (2) the normal adhesion force increased monotonically up to 13% as the bridge geometry approached its axisymmetric state. Quasi-static force analyses based on a newly developed decahedral model showed good agreement with the experiments and improved accuracy compared with that of cylindrical or rectangular column models previously proposed in the literature. Although limited in certain aspects, this study may (1) prove helpful to the design and analysis of liquid bridge force experiments on platforms similar to the SFA used in this study and (2) help to bridge the gap between friction and liquid bridge physics in the literature.

High Performance Bubble Manipulation on Ferrofluid-Infused Laser-Ablated Microstructured Surfaces.

Manipulation of gas bubbles in an aqueous ambient environment is fundamental to both academic research and industrial settings. Present bubble manipulation strategies mainly rely on buoyancy or Laplace gradient forces arising from the sophisticated terrain of substrates. However, these strategies suffer from limited manipulation flexibility such as slow horizontal motion and unidirectional transport. In this paper, a high performance manipulation strategy for gas bubbles is proposed by utilizing ferrofluid-infused laser-ablated microstructured surfaces (FLAMS). A typical gas bubble (<2 µL) can be accelerated at >150 mm/s2 and reach an ultrafast velocity over 25 mm/s on horizontal FLAMS. In addition, diverse powerful manipulation capabilities are demonstrated including antibuoyancy motion, "freestyle writing", bubble programmable coalescence, three-dimensional (3-D) controllable motion and high towing capacity of steering macroscopic object (>500 own mass) on the air-water interface. This strategy shows terrain compatibility, programmable design, and fast response, which will find potential applications in water treatment, electrochemistry, and so on.

Femtosecond Laser-Assisted Top-Restricted Self-Growth Re-Entrant Structures on Shape Memory Polymer for Dynamic Pressure Resistance.

Bioinspired surface material with re-entrant texture has been proven effective in exhibiting good pressure resistance to droplets with low surface tension under static conditions. In this work, we combined femtosecond laser cutting with shape memory polymer (SMP) and tape to fabricate re-entrant micropillar arrays by proposing a top-restricted self-growth (TRSG) strategy. Our proposed TRSG strategy simplifies the fabrication process and improves the processing efficiency of the re-entrant structure-based surface material. The structural parameters of the re-entrant micropillar array (microdisk diameter D, center-to-center distance P, and height H) can be adjusted through our TRSG processing method. To better characterize the anti-infiltration ability of various re-entrant micropillars, we studied the dynamic process of ethylene glycol droplet deformation by applying external vertical vibration to the surface material. Three parameters (vibration mode, amplitude, and frequency) of the external excitation and structural parameters of the re-entrant micropillar array were systemically investigated. We found that the surface material had better dynamic pressure resistance when P and D of the re-entrant texture were 650 and 500 µm, respectively, after heating for 6 min. This work provides new insights into the preparation and characterization of the surface material, which may find potential applications in microdroplet manipulation, drug testing, and biological sensors.

Reversible Tuning between Isotropic and Anisotropic Sliding by One-Direction Mechanical Stretching on Microgrooved Slippery Surfaces.

Dynamically responsive liquid-infused interfacial materials have broad technological implications in manipulating droplet motions. However, present works are mainly about reversible tuning of the isotropic slippery surface; the reversible switching between isotropic and anisotropic sliding has not been deeply explored. Here, we report a kind of liquid-infused elastic-grooved surface (LIEGS) by femtosecond laser ablation and realize reversible switching between isotropic and anisotropic sliding by one-direction mechanical stretching. Under mechanical stretching and strain release, droplet motion can be reversibly switched between the sliding and pinned states along the perpendicular direction to the grooves, whereas the droplet keeps sliding along the parallel direction to the grooves. The mechanism of reversible switching mainly contributes to the decrease of film thickness during the stretching process in which the film thickness decreases from 13 to 4 µm with the increase of the strain from 0 to 60%. Finally, we demonstrate the real-time flexible control over a droplet sliding/pinned on the strain-changing LIEGS.

Transdermal gene delivery.

Gene delivery has revolutionized conventional medical approaches to vaccination, cancer, and autoimmune diseases. However, current gene delivery methods are limited to either intravenous administration or direct local injections, failing to achieve well biosafety, tissue targeting, drug retention, and transfection efficiency for desired therapeutic outcomes. Transdermal drug delivery based on various delivery strategies can offer improved therapeutic potential and superior patient experiences. Recently, there has been increased foundational and clinical research focusing on the role of the transdermal route in gene delivery and exploring its impact on the efficiency of gene delivery. This review introduces the recent advances in transdermal gene delivery approaches facilitated by drug formulations and medical devices, as well as discusses their prospects.

Synergistic effects of multidrug/material combination deliver system for anti-mutidrug-resistant tumor.

Multidrug resistance (MDR) is a public health issue of particular concern, for which nanotechnology-based multidrug delivery systems are considered among the most effective suppressive strategies for such resistance in tumors. However, for such strategies to be viable, the notable shortcomings of reduced loading efficiency and uncontrollable drug release ratio need to be addressed. To this end, we developed a novel "multidrug/material" co-delivery system, using d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS, P-gp efflux pump inhibitor) and poly(amidoamine) (PAMAM) to fabricate a precursor material with the properties of reversing MDR and having a long-cycle. Further, to facilitate multidrug co-delivery, we loaded doxorubicin(Dox) and curcumin(Cur, cardiotoxicity modifier and P-gp inhibitor) into PAMAM-TPGS nano-micelles respectively, and mixed in appropriate proportions. The multidrug/material co-delivery system thus obtained was characterized by high drug loading and a controllable drug release ratio in the physiological environment. More importantly, in vitro and in vivo pharmacodynamic studies indicated that the multidrug/material co-delivery system facilitated the reversal of MDR. Moreover, the system has increased anti-tumor activity and is biologically safe. We accordingly propose that the "multidrug/material" co-delivery system developed in this study could serve as a potential platform for reversing MDR and achieving safe and effective clinical treatment.

Protein corona, influence on drug delivery system and its improvement strategy: A review.

Nano drug delivery systems offer several benefits, including enhancing drug solubility, regulating drug release, prolonging drug circulation time, and minimized toxicity and side effects. However, upon entering the bloodstream, nanoparticles (NPs) encounter a complex biological environment and get absorbed by various biological components, primarily proteins, leading to the formation of a 'Protein Corona'. The formation of the protein corona is affected by the characteristics of NPs, the physiological environment, and experimental design, which in turn affects of the immunotoxicity, specific recognition, cell uptake, and drug release of NPs. To improve the abundance of a specific protein on NPs, researchers have explored pre-coating, modifying, or wrapping NPs with the cell membrane to reduce protein adsorption. This paper, we have reviewed studies of the protein corona in recent years, summarized the formation and detection methods of the protein corona, the effect of the protein corona composition on the fate of NPs, and the design of new drug delivery systems based on the optimization of protein corona to provide a reference for further study of the protein corona and a theoretical basis for the clinical transformation of NPs.