Riboswitch-guided chalcone synthase engineering and metabolic flux optimization for enhanced production of flavonoids.

Flavonoids are a group of secondary metabolites from plants that have received attention as high value-added pharmacological substances. Recently, a robust and efficient bioprocess using recombinant microbes has emerged as a promising approach to supply flavonoids. In the flavonoid biosynthetic pathway, the rate of chalcone synthesis, the first committed step, is a major bottleneck. However, chalcone synthase (CHS) engineering was difficult because of high-level conservation and the absence of effective screening tools, which are limited to overexpression or homolog-based combinatorial strategies. Furthermore, it is necessary to precisely regulate the metabolic flux for the optimum availability of malonyl-CoA, a substrate of chalcone synthesis. In this study, we engineered CHS and optimized malonyl-CoA availability to establish a platform strain for naringenin production, a key molecular scaffold for various flavonoids. First, we engineered CHS through synthetic riboswitch-based high-throughput screening of rationally designed mutant libraries. Consequently, the catalytic efficiency (kcat/Km) of the optimized CHS enzyme was 62% higher than that of the wild-type enzyme. In addition to CHS engineering, we designed genetic circuits using transcriptional repressors to fine-tune the malonyl-CoA availability. The best mutant with synergistic effects of the engineered CHS and the optimized genetic circuit produced 98.71 mg/L naringenin (12.57 mg naringenin/g glycerol), which is the highest naringenin concentration and yield from glycerol in similar culture conditions reported to date, a 2.5-fold increase compared to the parental strain. Overall, this study provides an effective strategy for efficient production of flavonoids.

Enzyme activity engineering based on sequence co-evolution analysis.

The utility of engineering enzyme activity is expanding with the development of biotechnology. Conventional methods have limited applicability as they require high-throughput screening or three-dimensional structures to direct target residues of activity control. An alternative method uses sequence evolution of natural selection. A repertoire of mutations was selected for fine-tuning enzyme activities to adapt to varying environments during the evolution. Here, we devised a strategy called sequence co-evolutionary analysis to control the efficiency of enzyme reactions (SCANEER), which scans the evolution of protein sequences and direct mutation strategy to improve enzyme activity. We hypothesized that amino acid pairs for various enzyme activity were encoded in the evolutionary history of protein sequences, whereas loss-of-function mutations were avoided since those are depleted during the evolution. SCANEER successfully predicted the enzyme activities of beta-lactamase and aminoglycoside 3'-phosphotransferase. SCANEER was further experimentally validated to control the activities of three different enzymes of great interest in chemical production: cis-aconitate decarboxylase, α-ketoglutaric semialdehyde dehydrogenase, and inositol oxygenase. Activity-enhancing mutations that improve substrate-binding affinity or turnover rate were found at sites distal from known active sites or ligand-binding pockets. We provide SCANEER to control desired enzyme activity through a user-friendly webserver.

MDT-15/MED15 permits longevity at low temperature via enhancing lipidostasis and proteostasis.

Low temperatures delay aging and promote longevity in many organisms. However, the metabolic and homeostatic aspects of low-temperature-induced longevity remain poorly understood. Here, we show that lipid homeostasis regulated by Caenorhabditis elegans Mediator 15 (MDT-15 or MED15), a transcriptional coregulator, is essential for low-temperature-induced longevity and proteostasis. We find that inhibition of mdt-15 prevents animals from living long at low temperatures. We show that MDT-15 up-regulates fat-7, a fatty acid desaturase that converts saturated fatty acids (SFAs) to unsaturated fatty acids (UFAs), at low temperatures. We then demonstrate that maintaining a high UFA/SFA ratio is essential for proteostasis at low temperatures. We show that dietary supplementation with a monounsaturated fatty acid, oleic acid (OA), substantially mitigates the short life span and proteotoxicity in mdt-15(-) animals at low temperatures. Thus, lipidostasis regulated by MDT-15 appears to be a limiting factor for proteostasis and longevity at low temperatures. Our findings highlight the crucial roles of lipid regulation in maintaining normal organismal physiology under different environmental conditions.

Multi-level rebalancing of the naringenin pathway using riboswitch-guided high-throughput screening.

Recombinant microbes have emerged as promising alternatives to natural sources of naringenin-a key molecular scaffold for flavonoids. In recombinant strains, expression levels of the pathway genes should be optimized at both transcription and the translation stages to precisely allocate cellular resources and maximize metabolite production. However, the optimization of the expression levels of naringenin generally relies on evaluating a small number of variants from libraries constructed by varying transcription efficiency only. In this study, we introduce a systematic strategy for the multi-level optimization of biosynthetic pathways. We constructed a multi-level combinatorial library covering both transcription and translation stages using synthetic T7 promoter variants and computationally designed 5'-untranslated regions. Furthermore, we identified improved strains through high-throughput screening based on a synthetic naringenin riboswitch. The most-optimized strain obtained using this approach exhibited a 3-fold increase in naringenin production, compared with the parental strain in which only the transcription efficiency was modulated. Furthermore, in a fed-batch bioreactor, the optimized strain produced 260.2 mg/L naringenin, which is the highest concentration reported to date using glycerol and p-coumaric acid as substrates. Collectively, this work provides an efficient strategy for the expression optimization of the biosynthetic pathways.

Design of mutualistic microbial consortia for stable conversion of carbon monoxide to value-added chemicals.

Carbon monoxide (CO) is a promising carbon source for producing value-added biochemicals via microbial fermentation. However, its microbial conversion has been challenging because of difficulties in genetic engineering of CO-utilizing microorganisms and, more importantly, maintaining CO consumption which is negatively affected by the toxicity of CO and accumulated byproducts. To overcome these issues, we devised mutualistic microbial consortia, co-culturing Eubacterium limosum and genetically engineered Escherichia coli for the production of 3-hydroxypropionic acid (3-HP) and itaconic acid (ITA). During the co-culture, E. limosum assimilated CO and produced acetate, a toxic by-product, while E. coli utilized acetate as a sole carbon source. We found that this mutualistic interaction dramatically stabilized and improved CO consumption of E. limosum compared to monoculture. Consequently, the improved CO consumption allowed successful production of 3-HP and ITA from CO. This study is the first demonstration of value-added biochemical production from CO using a microbial consortium. Moreover, it suggests that synthetic mutualistic microbial consortium can serve as a powerful platform for the valorization of CO.

Plug-in repressor library for precise regulation of metabolic flux in Escherichia coli.

In metabolic engineering, enhanced production of value-added chemicals requires precise flux control between growth-essential competing and production pathways. Although advances in synthetic biology have facilitated the exploitation of a number of genetic elements for precise flux control, their use requires expensive inducers, or more importantly, needs complex and time-consuming processes to design and optimize appropriate regulator components, case-by-case. To overcome this issue, we devised the plug-in repressor libraries for target-specific flux control, in which expression levels of the repressors were diversified using degenerate 5' untranslated region (5' UTR) sequences employing the UTR Library Designer. After we validated a wide expression range of the repressor libraries, they were applied to improve the production of lycopene from glucose and 3-hydroxypropionic acid (3-HP) from acetate in Escherichia coli via precise flux rebalancing to enlarge precursor pools. Consequently, we successfully achieved optimal carbon fluxes around the precursor nodes for efficient production. The most optimized strains were observed to produce 2.59 g/L of 3-HP and 11.66 mg/L of lycopene, which were improved 16.5-fold and 2.82-fold, respectively, compared to those produced by the parental strains. These results indicate that carbon flux rebalancing using the plug-in library is a powerful strategy for efficient production of value-added chemicals in E. coli.

Biosensor-Assisted Adaptive Laboratory Evolution for Violacein Production.

Violacein is a naturally occurring purple pigment, widely used in cosmetics and has potent antibacterial and antiviral properties. Violacein can be produced from tryptophan, consequently sufficient tryptophan biosynthesis is the key to violacein production. However, the complicated biosynthetic pathways and regulatory mechanisms often make the tryptophan overproduction challenging in Escherichia coli. In this study, we used the adaptive laboratory evolution (ALE) strategy to improve violacein production using galactose as a carbon source. During the ALE, a tryptophan-responsive biosensor was employed to provide selection pressure to enrich tryptophan-producing cells. From the biosensor-assisted ALE, we obtained an evolved population of cells capable of effectively catabolizing galactose to tryptophan and subsequently used the population to obtain the best violacein producer. In addition, whole-genome sequencing of the evolved strain identified point mutations beneficial to the overproduction. Overall, we demonstrated that the biosensor-assisted ALE strategy could be used to rapidly and selectively evolve the producers to yield high violacein production.

Multi-level engineering of Baeyer-Villiger monooxygenase-based Escherichia coli biocatalysts for the production of C9 chemicals from oleic acid.

Whole-cell biotransformation is one of the promising alternative approaches to microbial fermentation for producing high-value chemicals. Baeyer-Villiger monooxygenase (BVMO)-based Escherichia coli biocatalysts have been engineered to produce industrially relevant C9 chemicals, such as n-nonanoic acid and 9-hydroxynonanoic acid, from a renewable long-chain fatty acid. The key enzyme in the biotransformation pathway (i.e., BVMO from Pseudomonans putida KT2440) was first engineered, using structure modeling-based design, to improve oxidative and thermal stabilities. Using a stable and tunable plasmid (STAPL) system, E. coli host cells were engineered to have increased plasmid stability and homogeneity of the recombinant E. coli population, as well as to optimize the level of BVMO expression. Multi-level engineering of the key enzyme in host cells, allowed recombinant E. coli expressing a fatty acid double-bond hydratase, a long-chain secondary alcohol dehydrogenase, and the engineered BVMO from P. putida KT2440 (i.e., E6BVMO_C302L/M340L), to ultimately produce C9 chemicals (i.e., n-nonanoic acid and 9-hydroxynonanoic acid) from oleic acid, with a yield of up to 6 mmoL/g dry cells. This yield was 2.4-fold greater than the yield in the control strain before engineering. Therefore, this study will contribute to the development of improved processes for the biosynthesis of industrially relevant medium chain fatty acids via whole-cell biocatalysis.

Metabolic perturbations in mutants of glucose transporters and their applications in metabolite production in Escherichia coli.

BACKGROUND: Most microorganisms have evolved to maximize growth rate, with rapid consumption of carbon sources from the surroundings. However, fast growing phenotypes usually feature secretion of organic compounds. For example, E. coli mainly produced acetate in fast growing condition such as glucose rich and aerobic condition, which is troublesome for metabolic engineering because acetate causes acidification of surroundings, growth inhibition and decline of production yield. The overflow metabolism can be alleviated by reducing glucose uptake rate. RESULTS: As glucose transporters or their subunits were knocked out in E. coli, the growth and glucose uptake rates decreased and biomass yield was improved. Alteration of intracellular metabolism caused by the mutations was investigated with transcriptome analysis and 13C metabolic flux analysis (13C MFA). Various transcriptional and metabolic perturbations were identified in the sugar transporter mutants. Transcription of genes related to glycolysis, chemotaxis, and flagella synthesis was downregulated, and that of gluconeogenesis, Krebs cycle, alternative transporters, quorum sensing, and stress induced proteins was upregulated in the sugar transporter mutants. The specific production yields of value-added compounds (enhanced green fluorescent protein, γ-aminobutyrate, lycopene) were improved significantly in the sugar transporter mutants. CONCLUSIONS: The elimination of sugar transporter resulted in alteration of global gene expression and redirection of carbon flux distribution, which was purposed to increase energy yield and recycle carbon sources. When the pathways for several valuable compounds were introduced to mutant strains, specific yield of them were highly improved. These results showed that controlling the sugar uptake rate is a good strategy for ameliorating metabolite production.

Precise tuning of the glyoxylate cycle in Escherichia coli for efficient tyrosine production from acetate.

BACKGROUND: Acetate is one of promising feedstocks owing to its cheap price and great abundance. Considering that tyrosine production is gradually shifting to microbial production method, its production from acetate can be attempted to further improve the economic feasibility of its production. RESULTS: Here, we engineered a previously reported strain, SCK1, for efficient production of tyrosine from acetate. Initially, the acetate uptake and gluconeogenic pathway were amplified to maximize the flux toward tyrosine. As flux distribution between glyoxylate and TCA cycles is critical for efficient precursor supplementation, the activity of the glyoxylate cycle was precisely controlled by expression of isocitrate lyase gene under different-strength promoters. Consequently, the engineered strain with optimal flux distribution produced 0.70 g/L tyrosine with 20% of the theoretical maximum yield which are 1.6-fold and 1.9-fold increased values of the parental strain. CONCLUSIONS: Tyrosine production from acetate requires precise tuning of the glyoxylate cycle and we obtained substantial improvements in production titer and yield by synthetic promoters and 5' untranslated regions (UTRs). This is the first demonstration of tyrosine production from acetate. Our strategies would be widely applicable to the production of various chemicals from acetate in future.

Tools and systems for evolutionary engineering of biomolecules and microorganisms.

Evolutionary approaches have been providing solutions to various bioengineering challenges in an efficient manner. In addition to traditional adaptive laboratory evolution and directed evolution, recent advances in synthetic biology and fluidic systems have opened a new era of evolutionary engineering. Synthetic genetic circuits have been created to control mutagenesis and enable screening of various phenotypes, particularly metabolite production. Fluidic systems can be used for high-throughput screening and multiplexed continuous cultivation of microorganisms. Moreover, continuous directed evolution has been achieved by combining all the steps of evolutionary engineering. Overall, modern tools and systems for evolutionary engineering can be used to establish the artificial equivalent to natural evolution for various research applications.

Synthetic auxotrophs for stable and tunable maintenance of plasmid copy number.

Although plasmid-based expression systems have advantages in multi-copy expression of genes, heterogeneity of plasmid copy number (PCN) in individual cells is inevitable even with the addition of antibiotics. Here, we developed a synthetic auxotrophic system for stable and tunable maintenance of the PCN in Escherichia coli without addition of antibiotics. This auxotroph expresses infA, one of the essential genes encoding a translation initiation factor, on a plasmid instead of on the chromosome. With this system, the gene expression was stably maintained for 40 generations with minimized cell-to-cell variation under antibiotic-free conditions. Moreover, varying the expression level of infA enabled us to rationally tune the PCN by more than 5.6-fold. This antibiotic-free PCN control system significantly improved the production of itaconic acid and lycopene compared to the conventional system based on antibiotics (2-fold). Collectively, the developed strategy could be a platform for the production of value-added products in antibiotic-free cultivation.

Directed evolution of the 3-hydroxypropionic acid production pathway by engineering aldehyde dehydrogenase using a synthetic selection device.

3-Hydroxypropionic acid (3-HP) is an important platform chemical, and biological production of 3-HP from glycerol as a carbon source using glycerol dehydratase (GDHt) and aldehyde dehydrogenase (ALDH) has been revealed to be effective because it involves a relatively simple metabolic pathway and exhibits higher yield and productivity than other biosynthetic pathways. Despite the successful attempts of 3-HP production from glycerol, the biological process suffers from problems arising from low activity and inactivation of the two enzymes. To apply the directed evolutionary approach to engineer the 3-HP production system, we constructed a synthetic selection device using a 3-HP-responsive transcription factor and developed a selection approach for screening 3-HP-producing microorganisms. The method was applied to an ALDH library, specifically aldehyde-binding site library of alpha-ketoglutaric semialdehyde dehydrogenase (KGSADH). Only two serial cultures resulted in enrichment of strains showing increased 3-HP production, and an isolated KGSADH variant enzyme exhibited a 2.79-fold higher catalytic efficiency toward its aldehyde substrate than the wild-type one. This approach will provide the simple and efficient tool to engineer the pathway enzymes in metabolic engineering.

Systematic optimization of L-tryptophan riboswitches for efficient monitoring of the metabolite in Escherichia coli.

Riboswitches form a class of genetically encoded sensor-regulators and are considered as promising tools for monitoring various metabolites. Functional parameters of a riboswitch, like dynamic or operational range, should be optimized before the riboswitch is implemented in a specific application for monitoring the target molecule efficiently. However, optimization of a riboswitch was not straightforward and required detailed studies owing to its complex sequence-function relationship. Here, we present three approaches for tuning and optimization of functional parameters of a riboswitch using an artificial L-tryptophan riboswitch as an example. First, the constitutive expression level was adjusted to control the dynamic range of an L-tryptophan riboswitch. The dynamic range increased as the constitutive expression level increased. Then, the function of a riboswitch-encoded protein was utilized to connect the regulatory response of the riboswitch to another outcome for amplifying the dynamic range. Riboswitch-mediated control of the host cell growth enabled the amplification of the riboswitch response. Finally, L-tryptophan aptamers with different dissociation constants were employed to alter the operational range of the riboswitch. The dose-response curve was shifted towards higher L-tryptophan concentrations when an aptamer with higher dissociation constant was employed. All strategies were effective in modifying the distinct functional parameters of the L-tryptophan riboswitch, and they could be easily applied to optimization of other riboswitches owing to their simplicity.

Production of itaconic acid from acetate by engineering acid-tolerant Escherichia coli W.

Utilization of abundant and cheap carbon sources can effectively reduce the production cost and enhance the economic feasibility. Acetate is a promising carbon source to achieve cost-effective microbial processes. In this study, we engineered an Escherichia coli strain to produce itaconic acid from acetate. As acetate is known to inhibit cell growth, we initially screened for a strain with a high tolerance to 10 g/L of acetate in the medium, and the W strain was selected as the host. Subsequently, the WC strain was obtained by overexpression of cad (encoding cis-aconitate decarboxylase) using a synthetic promoter and 5' UTR. However, the WC strain produced only 0.13 g/L itaconic acid because of low acetate uptake. To improve the production, the acetate assimilating pathway and glyoxylate shunt pathway were amplified by overexpression of pathway genes as well as its deregulation. The resulting strain, WCIAG4 produced 3.57 g/L itaconic acid (16.1% of theoretical maximum yield) after 88 hr of fermentation with rapid acetate assimilation. These efforts support that acetate can be a potential feedstock for biochemical production with engineered E. coli.

Precise flux redistribution to glyoxylate cycle for 5-aminolevulinic acid production in Escherichia coli.

Microbial production of 5-aminolevulinic acid (ALA) has received much attention because of its potential in clinical applications. Overexpression along with the deciphering of regulation of the related enzymes and an analogue transporter yielded remarkable achievements in ALA production. Nonetheless, there is significant room for carbon flux optimization to enhance ALA production. The aim of this study was precise carbon flux optimization for high ALA production in Escherichia coli expressing the ALA biosynthetic pathway. Initially, genes hemA and hemL were overexpressed with strong promoters and synthetic 5'-untranslated regions (5'-UTRs). Then, the tricarboxylic acid (TCA) cycle was blocked to force carbon flux toward the ALA production pathway by deletion of sucA. Although the resulting strain showed a severe metabolic imbalance and low ALA production, further precise tuning of carbon flux to the glyoxylate cycle by varying the transcriptional strength of aceA led to substantially improved cell growth and ALA production. Thus, this precise tuning of the glyoxylate cycle in a quantitative manner should also enable efficient production of other value-added products derived from the TCA cycle.

Highly multiplex and sensitive SNP genotyping method using a three-color fluorescence-labeled ligase detection reaction coupled with conformation-sensitive CE.

For the development of clinically useful genotyping methods for SNPs, accuracy, simplicity, sensitivity, and cost-effectiveness are the most important criteria. Among the methods currently being developed for SNP genotyping technology, the ligation-dependent method is considered the simplest for clinical diagnosis. However, sensitivity is not guaranteed by the ligation reaction alone, and analysis of multiple targets is limited by the detection method. Although CE is an attractive alternative to error-prone hybridization-based detection, the multiplex assay process is complicated because of the size-based DNA separation principle. In this study, we employed the ligase detection reaction coupled with high-resolution CE-SSCP to develop an accurate, sensitive, and simple multiplex genotyping method. Ligase detection reaction could amplify ligated products through recurrence of denaturation and ligation reaction, and SSCP could separate these products according to each different structure conformation without size variation. Thus, simple and sensitive SNP analysis can be performed using this method involving the use of similar-sized probes, without complex probe design steps. We found that this method could not only accurately discriminate base mismatches but also quantitatively detect 37 SNPs of the tp53 gene, which are used as targets in multiplex analysis, using three-color fluorescence-labeled probes.

Naringenin-responsive riboswitch-based fluorescent biosensor module for Escherichia coli co-cultures.

The ability to design and construct combinatorial synthetic metabolic pathways has far exceeded our capacity for efficient screening and selection of the resulting microbial strains. The need for high-throughput rapid screening techniques is of upmost importance for the future of synthetic biology and metabolic engineering. Here we describe the development of an RNA riboswitch-based biosensor module with dual fluorescent reporters, and demonstrate a high-throughput flow cytometry-based screening method for identification of naringenin over producing Escherichia coli strains in co-culture. Our efforts helped identify a number of key operating parameters that affect biosensor performance, including the selection of promoter and linker elements within the sensor-actuator domain, and the effect of host strain, fermentation time, and growth medium on sensor dynamic range. The resulting biosensor demonstrates a high correlation between specific fluorescence of the biosensor strain and naringenin titer produced by the second member of the synthetic co-culture system. This technique represents a novel application for synthetic microbial co-cultures and can be expanded from naringenin to any metabolite if a suitable riboswitch is identified. The co-culture technique presented here can be applied to a variety of target metabolites in combination with the SELEX approach for aptamer design. Due to the compartmentalization of the two genetic constructs responsible for production and detection into separate cells and application as independent modules of a synthetic microbial co-culture we have subsequently reduced the need for re-optimization of the producer module when the biosensor is replaced or removed. Biotechnol. Bioeng. 2017;114: 2235-2244. © 2017 Wiley Periodicals, Inc.

Optimization of industrial microorganisms: recent advances in synthetic dynamic regulators.

Production of biochemicals by industrial fermentation using microorganisms requires maintaining cellular production capacity, because maximal productivity is economically important. High-productivity microbial strains can be developed using static engineering, but these may not maintain maximal productivity throughout the culture period as culture conditions and cell states change dynamically. Additionally, economic reasons limit heterologous protein expression using inducible promoters to prevent metabolic burden for commodity chemical and biofuel production. Recently, synthetic and systems biology has been used to design genetic circuits, precisely controlling gene expression or influencing genetic behavior toward a desired phenotype. Development of dynamic regulators can maintain cellular phenotype in a maximum production state in response to factors including cell concentration, oxygen, temperature, pH, and metabolites. Herein, we introduce dynamic regulators of industrial microorganism optimization and discuss metabolic flux fine control by dynamic regulators in response to metabolites or extracellular stimuli, robust production systems, and auto-induction systems using quorum sensing.

Precise precursor rebalancing for isoprenoids production by fine control of gapA expression in Escherichia coli.

Biosynthesis of isoprenoids via the 1-deoxy-D-xylulose-5-phosphate (DXP) pathway requires equimolar glyceraldehyde 3-phosphate and pyruvate to divert carbon flux toward the products of interest. Here, we demonstrate that precursor balancing is one of the critical steps for the production of isoprenoids in Escherichia coli. First, the implementation of the synthetic lycopene production pathway as a model system and the amplification of the native DXP pathway were accomplished using synthetic constitutive promoters and redesigned 5'-untranslated regions (5'-UTRs). Next, fine-controlled precursor balancing was investigated by tuning phosphoenolpyruvate synthase (PpsA) or glyceraldehyde 3-phosphate dehydrogenase (GAPDH). The results showed that tuning-down of gapA improved the specific lycopene content by 45% compared to the overexpression of ppsA. The specific lycopene content in the strains with down-regulated gapA increased by 97% compared to that in the parental strain. Our results indicate that gapA is the best target for precursor balancing to increase biosynthesis of isoprenoids.