Features of an effective operative dentistry learning environment: students' perceptions and relationship with performance.

OBJECTIVE: Students' perceptions of their learning environment influence the quality of outcomes they achieve. Learning dental operative techniques in a simulated clinic environment is characterised by reciprocal interactions between skills training, staff- and student-related factors. However, few studies have examined how students perceive their operative learning environments and whether there is a relationship between their perceptions and subsequent performance. Therefore, this study aimed to clarify which learning activities and interactions students perceived as supporting their operative skills learning and to examine relationships with their outcomes. METHODS: Longitudinal data about examples of operative laboratory sessions that were perceived as effective or ineffective for learning were collected twice a semester, using written critical incidents and interviews. Emergent themes from these data were identified using thematic analysis. Associations between perceptions of learning effectiveness and performance were analysed using chi-square tests. RESULTS: Students indicated that an effective learning environment involved interactions with tutors and peers. This included tutors arranging group discussions to clarify processes and outcomes, providing demonstrations and constructive feedback. Feedback focused on mistakes, and not improvement, was reported as being ineffective for learning. However, there was no significant association between students' perceptions of the effectiveness of their learning experiences and subsequent performance. CONCLUSIONS: It was clear that learning in an operative technique setting involved various factors related not only to social interactions and observational aspects of learning but also to cognitive, motivational and affective processes. Consistent with studies that have demonstrated complex interactions between students, their learning environment and outcomes, other factors need investigation.

Determining the direction of tooth grinding: an in vitro study.

The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction of the dietary habits and lifestyles of prehistoric and modern humans. The aim of this in vitro study was to determine whether an assessment of microwear features of experimental scratches placed on enamel, perpendicularly to the direction of grinding, could predict the grinding direction. Experimental scratches were placed using a scalpel blade on standardised wear facets that had been prepared by wearing opposing enamel surfaces in an electromechanical tooth wear machine. These control 'baseline' facets (with unworn experimental scratches) were subjected to 50 wear cycles, so that differential microwear could be observed on the leading and trailing edges of the 'final' facets. In Group 1 (n=28), the 'footprint' microwear patterns corresponding to the known grinding direction of specimens in the tooth wear machine were identified. Then, they were used to predict the direction of tooth grinding blindly in the same sample after a 2-week intermission period. To avoid overfitting the predictive model, its sensitivity was also cross-validated in a new sample (Group 2, n=14). A crescent-shaped characteristic observed in most experimental scratches matched the grinding direction on all occasions. The best predictor of the direction of grinding was a combined assessment of the leading edge microwear pattern and the crescent characteristic (82.1% in Group 1 and 92.9% in Group 2). In conclusion, a simple scratch test can determine the direction of tooth grinding with high reliability, although further improvement in sensitivity is desirable.

Acquiring psychomotor skills in operative dentistry: do innate ability and motivation matter?

OBJECTIVE: The acquisition of psychomotor skills is a key competence in the practice of dentistry, and innate abilities and motivation have been shown to influence motor performance. However, the explicit integration of these factors into the design of research projects about skill acquisition in dentistry has been limited. Therefore, the purpose of this study was to provide a comprehensive analysis of how dental students' abilities and motivation affected their performance in an operative task. METHODS: A longitudinal study with two cohorts of dental students was conducted in laboratory classes forming part of an operative technique course. A range of standardised psychometric tests was used to assess different abilities before completing a cavity preparation on Frasaco teeth. This was followed immediately by completion of an Intrinsic Motivation Inventory. RESULTS: Low but statistically significant correlations (P<0.05) were found between dental performance and psychomotor ability (r=0.22), and also dental performance and motivation (r=0.19). A significant difference (P<0.05) was found in the grades obtained for the cavity preparation exercise in one cohort between students with higher levels of psychomotor ability compared with those with lower levels (Tracing scores) (P<0.05). No significant differences in grades obtained for the cavity preparation exercise were found between students with higher and lower levels of motivation. CONCLUSION: Both innate psychomotor ability and motivation showed only weak positive associations with dental performance on cavity preparation exercises. Our study suggests that student-related factors only provide limited information to explain differences in performance or to be useful as specific predictors of future performance by individuals.

Abfraction: separating fact from fiction.

Non-carious cervical lesions involve loss of hard tissue and, in some instances, restorative material at the cervical third of the crown and subjacent root surface, through processes unrelated to caries. These non-carious processes may include abrasion, corrosion and possibly abfraction, acting alone or in combination. Abfraction is thought to take place when excessive cyclic, non-axial tooth loading leads to cusp flexure and stress concentration in the vulnerable cervical region of teeth. Such stress is then believed to directly or indirectly contribute to the loss of cervical tooth substance. This article critically reviews the literature for and against the concept of abfraction. Although there is theoretical evidence in support of abfraction, predominantly from finite element analysis studies, caution is advised when interpreting results of these studies because of their limitations. In fact, there is only a small amount of experimental evidence for abfraction. Clinical studies have shown associations between abfraction lesions, bruxism and occlusal factors, such as premature contacts and wear facets, but these investigations do not confirm causal relationships. Importantly, abfraction lesions have not been reported in pre-contemporary populations. It is important that oral health professionals understand that abfraction is still a theoretical concept, as it is not backed up by appropriate clinical evidence. It is recommended that destructive, irreversible treatments aimed at treating so-called abfraction lesions, such as occlusal adjustment, be avoided.

The effect of casein phosphopeptide-amorphous calcium phosphate on erosive dentine wear.

BACKGROUND: Erosive tooth wear is a growing concern in clinical dentistry. Our aims were to assess the effect of Tooth Mousse (TM) in managing erosive dentine wear in vitro. METHODS: Opposing enamel and dentine specimens from 36 third molar teeth were worn under a load of 100 N for 75 000 cycles in electromechanical tooth wear machines. In experiment 1, TM was applied continuously at the wear interface and the mean dentine wear rate was compared with those of specimens subjected to continuous application of hydrochloric acid (HCl, pH 3.0) and deionized water (DW, pH 6.1) as lubricants. In experiment 2, specimens were subjected to TM application every 1600 cycles at both pH 3.0 and 6.1, and the mean dentine wear rates were compared with those of specimens worn with continuous application of HCl and DW lubricants. RESULTS: Dentine wear was reduced significantly with continuous application of TM compared with HCl and DW lubricants. Specimens prepared with continuous TM application displayed smooth wear facets, whereas more pronounced microwear details were observed with HCl and DW lubricants. CONCLUSIONS: Both remineralization and lubrication seem to contribute to reduction in dentine wear associated with TM application, although lubrication appears to have a more pronounced effect.

A qualitative assessment of non-carious cervical lesions in extracted human teeth.

BACKGROUND: Opinions vary about the causes of non-carious cervical lesions (NCCLs). They have been attributed to toothbrush abrasion, acid corrosion (commonly termed dental erosion), and abfraction. The purpose of this study was to examine the microwear details of NCCLs in a collection of extracted human teeth using scanning election microscopy (SEM). METHODS: Negative replicas of large NCCLs in 24 extracted human teeth were obtained in polyvinylsiloxane impression material (Light Body Imprint II, 3M ESPE) and viewed under SEM. RESULTS: All NCCLs extended from the cemento-enamel junction to the root surface and they displayed a variety of wedge-shaped appearances. There was evidence of both abrasion and corrosion in 18 of the 24 teeth (75.0 per cent), abrasion only in one tooth (4.2 per cent) and corrosion only in five teeth (20.8 per cent). Horizontal furrows with smooth edges and minor scratch marks, characteristic of abrasion and corrosion, were noted in 13 teeth (54.2 per cent). CONCLUSIONS: Based on microscopic assessment of a sample of extracted teeth, it appears that abrasion and corrosion are common associated aetiological factors in the formation of NCCLs.

Surface-Sensitive Microwear Texture Analysis of Attrition and Erosion.

Scale-sensitive fractal analysis of high-resolution 3-dimensional surface reconstructions of wear patterns has advanced our knowledge in evolutionary biology, and has opened up opportunities for translatory applications in clinical practice. To elucidate the microwear characteristics of attrition and erosion in worn natural teeth, we scanned 50 extracted human teeth using a confocal profiler at a high optical resolution (X-Y, 0.17 µm; Z < 3 nm). Our hypothesis was that microwear complexity would be greater in erosion and that anisotropy would be greater in attrition. The teeth were divided into 4 groups, including 2 wear types (attrition and erosion) and 2 locations (anterior and posterior teeth; n = 12 for each anterior group, n = 13 for each posterior group) for 2 tissue types (enamel and dentine). The raw 3-dimensional data cloud was subjected to a newly developed rigorous standardization technique to reduce interscanner variability as well as to filter anomalous scanning data. Linear mixed effects (regression) analyses conducted separately for the dependent variables, complexity and anisotropy, showed the following effects of the independent variables: significant interactions between wear type and tissue type ( P = 0.0157 and P = 0.0003, respectively) and significant effects of location ( P < 0.0001 and P = 0.0035, respectively). There were significant associations between complexity and anisotropy when the dependent variable was either complexity ( P = 0.0003) or anisotropy ( P = 0.0014). Our findings of greater complexity in erosion and greater anisotropy in attrition confirm our hypothesis. The greatest geometric means were noted in dentine erosion for complexity and dentine attrition for anisotropy. Dentine also exhibited microwear characteristics that were more consistent with wear types than enamel. Overall, our findings could complement macrowear assessment in dental clinical practice and research and could assist in the early detection and management of pathologic tooth wear.

Prevalence and side preference for tooth grinding in twins.

BACKGROUND: Estimates of the prevalence of tooth grinding in children range considerably, reflecting different methods of recording. The main aims of this study were to determine the prevalence of tooth grinding in monozygotic (MZ) and dizygotic (DZ) twin pairs by assessing wear faceting on the primary canines, and to compare the faceting on the right and left to determine whether children have a side preference for grinding. METHODS: The sample consisted of 116 MZ twin pairs and 124 dizygous DZ twin pairs, all participants in an ongoing study of dento-facial development at the dental schools in Adelaide and Melbourne. Evidence of wear faceting on primary maxillary and mandibular canine tips was recorded from dental casts, and the side with the larger wear facet recorded. Types of occlusal relationship, handedness, zygosity and gender were also recorded, and associations between variables analysed statistically. RESULTS: Canine tip wear facets were found in 100 per cent of the sample, and grinding was lateralized in 59 per cent of children. MZ twin pairs showed a higher discordance for grinding side preference than DZ twin pairs (33.8 per cent compared with 16.8 per cent), providing evidence of a mirror-imaging effect for grinding side preference. There was no strong evidence that individuals had the same preference for grinding side and handedness, although right-handers (RH) showed a preference for a grinding side more often than non-right-handers (NRH) (63.6 per cent compared with 51.2 per cent), consistent with previous findings that RHs display more cerebral lateralization than NRHs. CONCLUSIONS: Tooth grinding appears to be a universal phenomenon in children and is commonly expressed more on one side than the other. The significantly higher discordance for grinding side preference in MZ twin pairs compared with DZ twin pairs may reflect a mirror-imaging effect in the former. However, at present we have no evidence to suggest that handedness and preferred tooth grinding side are associated.

Effects of non-carious cervical lesion size, occlusal loading and restoration on biomechanical behaviour of premolar teeth.

BACKGROUND: Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyse the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behaviour of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests. METHODS: Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group). RESULTS: There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p < 0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations. CONCLUSIONS: Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs.

Nanoscratch testing for the assessment of enamel demineralization under conditions simulating wine erosion.

BACKGROUND: Erosive tooth wear and dentinal hypersensitivity are common problems affecting professional wine tasters. By using nanoscratch testing, the aim of this in vitro study was to assess enamel softening under conditions simulating 10 one-minute episodes of wine erosion. METHODS: Ten enamel specimens were bathed in artificial saliva for 2 hours before being eroded for 10 episodes, with each episode comprising one minute of wine erosion followed by one minute of remineralization in artificial saliva. Nanoscratches were placed with a spherical tip (20 µm radius) in a nanoindenter under a load of 100 mN at baseline (stage 1), after a one-erosion episode (stage 2) and after 10-erosion episodes (stage 3). RESULTS: There were significant effects of erosion stages on both scratch depth (p<0.001) and surface roughness (p<0.001). Post hoc tests showed significant differences in both scratch depths and surface roughness between stages 1 and 3 (p<0.001), and between stages 2 and 3 (p<0.01). CONCLUSIONS: Enamel softening occurs at an early stage of wine tasting, emphasizing the need to implement early preventive strategies in professional wine tasters. Further research elucidating the fundamental mechanisms involved in early stages of erosion has the potential to lead to development of more effective preventive strategies.

Wear of human enamel: a quantitative in vitro assessment.

Many factors influence the extent and rate at which enamel wears. Clinical studies in humans are limited by difficulties in the accurate quantification of intra-oral wear and by a lack of control over the oral environment. The purpose of this study was to determine the wear characteristics of human dental enamel under controlled experimental conditions. An electro-mechanical tooth wear machine, in which opposing enamel surfaces of sectioned, extracted teeth were worn under various conditions, was used to simulate tooth grinding or bruxism. Enamel surface wear was quantified by weight to an accuracy of 0.1 mg, with water uptake and loss controlled. The variables considered included the structure and hardness of enamel, facet area, duration of tooth contact, relative speed of opposing surfaces, temperature, load, pH, and the nature of the lubricant. Enamel wear under non-lubricated conditions increased with increasing load over the range of 1.7 to 16.2 kg. The addition of a liquid lubricant (pH = 7) reduced enamel wear up to 6.7 kg, but when the load increased above this threshold, the rate of wear increased dramatically. With the viscosity of the lubricant constant and pH = 3, the rate of wear was further reduced to less than 10% of the non-lubricated rate at 9.95 kg, after which the rate again increased substantially. Under more extreme conditions (pH = 1.2, simulating gastric acids), the wear was excessive under all experimental loads. When saliva was used as a lubricant, the amount of wear was relatively low at 9.95 kg, but rapid wear occurred at 14.2 kg and above. These results indicate that under non-lubricated conditions, enamel wear remains low at high loads due to the dry-lubricating capabilities of fine enamel powder. Under lubricated conditions, low loads with an acidic lubricant lead to little enamel wear, whereas very low pH results in a high rate of wear under all loads.

Experimental studies of human dentine wear.

Previous in-vitro studies have described the relation between rates of enamel wear and variables such as applied load and lubricant pH. The aim here was to extend understanding of tooth-wear processes by considering the rate of wear in human dentine. Enamel was removed from extracted third molar teeth that had been sectioned mesiodistally. Moisture fluctuation within dentine was minimized by conducting all procedures under copious irrigation or in sealed containers of lubricant at pH 7.0. Specimens were subjected to wear using a purpose-built apparatus at loads of 6.2, 9.95 and 13.2 kg. All experiments were done with a unidirectional wear stroke of 3 mm at a rate of 80 cycles/min for 75 min and repeated for 75 min. Dentine wear was assessed by specimen weight loss. At pH 7.0, wear rates ranged from 0.50 mg/10(3) cycles at a load of 6.2 kg to 0.77 mg/10(3) cycles when a load of 13.2 kg was applied. At higher loads, dentine wear rates were similar to those of enamel. Increasing load is thus associated with a progressive increase in the rate of dentine wear. This relation differs significantly from that for enamel, reflecting fundamental differences in the composition and structure of these tissues.

Tooth wear in children with Down syndrome.

BACKGROUND: Several studies have described the impact that dental caries and periodontitis may have on the dentitions of individuals with Down syndrome, but there are few reports about the effects of tooth wear. This investigation aimed to compare the aetiology, prevalence and severity of tooth wear in 49 cytogenetically confirmed Down syndrome children with 49 non-Down syndrome controls. METHODS: This study involved three aspects: an oral examination, including obtaining dental impressions; a dietary analysis spanning three days; and a questionnaire seeking information about habits, medical problems and medications. Tooth wear severity was scored on a 4-grade scale (none-to-little; moderate; severe; very severe), while aetiology was classified as being due to attrition mainly, erosion mainly, or a combination of both. Double determinations established scoring method reliability and chi-square tests assessed associations between samples. RESULTS: Tooth wear was significantly more frequent (p<0.01) in the Down syndrome than the non-Down syndrome sample (67.4 per cent cf 34.7 per cent), with more of the Down syndrome children showing severe to very severe wear (59.2 per cent cf 8.2 per cent). Significantly more Down syndrome children (p<0.05) displayed a multifactorial aetiology of tooth wear, i.e., both attrition and erosion (46.7 per cent cf 28.6 per cent), although no particular dietary link was established. Gastric reflux and vomiting were reported in over 20 per cent of the Down syndrome sample. CONCLUSIONS: Given the potential consequences of high levels of tooth wear, associated with tooth grinding and an acidic oral environment in Down syndrome children, educational programmes aimed at increasing awareness of carers and health professionals are needed urgently.

A model for the prediction of tooth wear in individuals.

BACKGROUND: Easily applied, age-specific standards are useful in assisting clinicians to decide whether the extent of tooth wear observed in a given patient at a specific age is acceptable or whether intervention is indicated. METHOD: A simple method of scoring tooth wear and previously established mathematical relationships between tooth wear scores and age, provide the basis of a method for predicting tooth wear scores. In its most specific form, the method can be used to predict tooth wear scores for individual patients at subsequent ages. Alternatively, tables or graphs can be consulted to provide a less precise prediction of tooth wear that can assist clinicians to decide whether the amount of wear reflects high, moderate or low rates of wear at the specified age. CONCLUSION: In cases where there is no reason to believe that aetiological factors have changed significantly over time, data obtained from the methods described can assist clinicians to plan appropriate management for patients presenting with unacceptable levels of tooth wear.

Comparison of exposed dentinal surfaces resulting from abrasion and erosion.

The aim of this study was to compare the shape of exposed dentinal surfaces caused by abrasion and erosion with a view to developing a diagnostic clinical test. The study material consisted of 80 natural teeth and 129 dental models obtained from Australian Aborigines known to display considerable dental abrasion due to their diet, and dental models of 37 Caucasians diagnosed with dental erosion through detailed history and dietary analysis. Polyvinyl siloxane impressions were obtained of all occlusal surfaces with dentinal scooping in both the 'abrasion' and 'erosion' groups. All impressions were sectioned buccolingually through the deepest point of the scooped dentine, and then the profiles were photocopied at x2 magnification. The breadth and depth of dentinal profiles were measured to an accuracy of 0.1 mm, enabling ratios of depth:breadth to be determined, and the position of the deepest part of each scooped surface was recorded. The mean depth:breadth ratio of scooped dentine was significantly greater in the Aboriginal natural teeth (0.19 +/- 0.06, mean +/- SE) than in the Aboriginal dental models (0.15 +/- 0.04). Both Aboriginal natural teeth and models with abrasion showed significantly smaller ratios (p < 0.05) than the Caucasian models showing erosion (0.33 +/- 0.07). Furthermore, in the abrasion samples, the deepest region of the scooped dentine tended to be lingually placed more often in maxillary teeth but buccally placed more often in mandibular teeth (p < 0.05). These results indicate that scooped dentine on abraded occlusal surfaces of teeth displays significant differences in shape compared with that caused mainly by erosion.

Tooth wear prevention: a quantitative and qualitative in vitro study.

BACKGROUND: Management of tooth wear from grinding presents a significant clinical challenge. Acrylic nightguards are often used to protect the teeth, but many patients still grind with these appliances. This study aimed to test the effectiveness of three lubricants in reducing enamel wear by using an electro-mechanical machine under controlled conditions, with a view to undertaking a subsequent longitudinal clinical study. METHODS: Sectioned tooth specimens were worn against each other under different loads and with the addition of three different lubricants: calcium fluoride (CaF) powder, olive-oil, and a combination of calcium fluoride with olive-oil in the form of a slurry. Wear rates of enamel only were quantified by weighing the specimens, and resin replicas of the worn tooth surfaces were made for examination under a scanning electron microscope. RESULTS: All three lubricants reduced the amount of enamel wear significantly compared with wearing specimens without adding lubricants. Wear rate was influenced by the type of lubricant and the load applied. Wear rates were significantly less for olive-oil and the olive-oil/CaF slurry compared with CaF alone. The microwear detail differed between the three lubricants. CONCLUSIONS: This study has shown that enamel wear can be reduced using dry or wet lubricants between opposing teeth that are worn under controlled conditions. Further research is required to clarify their possible clinical applications.

Association of frontal sinus development with somatic and skeletal maturation in Aboriginal Australians: a longitudinal study.

There have been very few studies of frontal sinus development and its association with other growth parameters in humans. The aim of this study was to investigate the relationship of frontal sinus development with somatic and skeletal maturation in a sample of Aboriginal Australians. The sample comprised 31 individuals, of whom 17 were males and 14 females. For the selected subjects the following records were available: lateral head radiographs, hand-wrist radiographs and stature recordings, generally covering the age range from 7 to 18 years. Descriptive statistics for frontal sinus size, skeletal ossification and body height were calculated at yearly intervals and comparisons made between the sexes. Growth velocities in frontal sinus height, frontal sinus depth and stature were also calculated for both sexes. The frontal sinus was found to display a well-defined adolescent growth spurt, with its peak velocity occurring after the peak velocity in body height. Females were found to attain peak velocity in sinus height earlier, on average, than males but they attained peak velocity in sinus depth at a similar age to males. The sequence of hand-wrist ossification events followed a similar pattern in both sexes, with events in females occurring approximately one year earlier than those in males. These results indicate that an adolescent spurt is present in frontal sinus growth and that the spurt tends to occur after statural velocity has peaked. Hand-wrist ossification events also tend to have a close relationship to peak statural and frontal sinus velocity and these relationships may be useful in clinical situations for predictive purposes.

Functional dental occlusion: an anthropological perspective and implications for practice.

Physiologic changes occur in dental occlusion throughout life, resulting from the interplay between functional demands and reciprocating adaptive responses. These changes have been reported in the anthropological literature and they reflect evolutionary changes in the human stomatognathic system during the Paleolithic, hunter-gatherer period. Specific occlusal changes occur in response to different environments, leading to extensive variation within and between extinct and extant human populations. For example, functional demands can cause occlusal and interproximal tooth wear, resulting in shortening of the dental arch, continual tooth eruption and changes in masticatory patterns. Since the advent of farming through to our current industrialized culture, functional demands on the human masticatory system, and its adaptive responses to these demands, have been reduced considerably. Indeed, it is only occasionally that functional demands are severe enough to lead to obvious pathology in the modern human dentition. In contrast to normal masticatory activity, 'modern-day conditions' such as dental caries, periodontal disease and erosion, can lead to significant changes in dental occlusion that are pathological and need to be treated. The masticatory system is a dynamic, functional unit that displays considerable change over a lifetime. In this concept paper, it is proposed that modern human populations living in industrialized environments display dental occlusions that can be considered to be 'neotenous'; that is, our dentitions tend to reflect an unworn stage of our ancestors that was only seen in infants, juveniles and young adults. Clinicians can draw on both phylogenetic and ontogenetic perspectives of 'functional dental occlusion' to differentiate continual physiological changes occurring over time that require ongoing review, from pathological responses that require intervention.

Reorientating dental curricula to reflect a minimally invasive dentistry approach for patient-centred management.

Minimally invasive dentistry (MID), together with patient-centred care (PCC), can be considered central to patient management. These approaches have been incorporated in the structure of various dental curricula and indeed formally assessed. However, there is limited evidence that students have an integrated skill-set and are able to apply these skills when providing direct patient care within the clinical setting. Assessment of students' application of core clinical skills has identified numerous deficiencies that need to be addressed. The revised Bachelor of Dental Surgery curriculum at the School of Dentistry, The University of Adelaide, provides an example of how MID, underpinned by PCC, can be presented throughout a dental curriculum. Essentially, MID and PCC are not considered as separate subjects but as a patient management approach that is 'woven into the whole fabric' of the curriculum. The programme relies on the development of empathic communication skills that enable students to obtain key patient information, including their patients' values, beliefs, needs, preferences and expectations, thereby allowing management to be tailor-made. As a result, patients are empowered to be a part of the oral health care team. The Adelaide undergraduate dental curriculum consists of one clinical stream called Dental Science and Practice (DSP), that promotes the application of student knowledge, skills and behaviours in the clinical setting. Vertical and horizontal integration, aligned with an integrated approach to assessment, drives the learning throughout the programme. Clearly-defined outcomes are introduced by Integrated Learning Activities (ILAs) that provide a focus for associated learning activities (e.g. class meetings, tutorials, simulation laboratories, etc). The aim of this approach to learning and teaching is to ensure the required learning outcomes are achieved. It also requires coordinated teaching teams including trained external tutors who clearly understand all aspects of MID and PCC within the curriculum structure.

Non-carious cervical lesions: influence of morphology and load type on biomechanical behaviour of maxillary incisors.

BACKGROUND: The aim of this study was to measure the effect of simulating two different loads on maxillary incisors displaying eight morphological types of non-carious cervical lesions, unrestored and restored with an adhesive restoration, by quantifying the stress distributions generated using finite element analysis. METHODS: Virtual models of maxillary incisors were generated using the CAD software (RhinoCeros). After composing virtual dental and supporting structures with and without non-carious cervical lesions, each model was meshed using a control mesh device (ANSYS Finite Element Analysis Software). All of the virtual models were subjected to two load types, oblique load and vertical load, to simulate occlusal forces of 100 N each. Comparisons were made between simulated teeth with non-carious cervical lesions, with and without composite resin restorations, and a simulated sound tooth. Data summarizing the stress distributions were obtained in MPa using von Mises criteria. RESULTS: Oblique loading on simulated non-carious cervical lesions resulted in greater stress concentration compared with vertical loading, and non-carious cervical lesions with acute angles displayed higher stress concentrations at the depth of the lesion. Restoring the lesions with an adhesive restoration, such as composite resin, appeared to overcome this stress concentration. CONCLUSIONS: Restoring NCCLs with adhesive restorative materials, such as a nanohybrid composite resin, appears to recover the biomechanical behaviour similar to sound teeth.