Triple Isomerism in 3D Covalent Organic Frameworks.

Isomerism in covalent organic frameworks (COFs) has scarcely been known. Here, for the first time we show 3D COFs with three framework isomers or polymorphs constructed from the same building blocks. All isomers were obtained as large (>10 µm) crystals; although their crystal shapes were distinctly different, they showed identical FT-IR and solid-state NMR spectra. Our structural analyses revealed unprecedented triple isomerism in 3D COFs (noninterpenetrated dia, qtz, and 3-fold interpenetrated dia-c3 nets). Furthermore, this Communication reports the first known COF with qtz topology for which the structure determination was based on Rietveld analysis. We achieved triple framework isomerism by reticulating a tetrahedral building block with a flexible junction and a linear building block with PEO side chains and by varying solution compositions. Our energy calculations, along with the discovery of interisomer transition, revealed that the isomer with qtz topology was a kinetic isomer. Thus, this simple yet little-explored concept of reticulating only flexible building blocks is an effective pathway to significantly broaden the diversity of 3D COFs, which have been proposed for a myriad of applications.

Chiral crystal-like droplets displaying unidirectional rotational sliding.

The self-assembly of organic molecules into supramolecular materials with structural ordering beyond the nanometre scale is challenging. Here, we report the spontaneous self-assembly of a chiral discotic triphenylene derivative into millimetre-sized droplets. The structure of the droplets is characterized by high positional and orientational ordering and a three-dimensional integrity similar to that of single crystals. Notwithstanding, these assemblies slide when placed on a vertical substrate demonstrating their fluid nature. X-ray imaging shows that during the sliding process the internal crystal-like structure is maintained and that the droplets undergo clockwise or counterclockwise unidirectional rotation, depending on the chirality of their molecular components. Rheological measurements suggest that this rotational behaviour might result from the distinct yield stress between the (R)- and (S)-enantiomers. Overall, our findings demonstrate that molecular chirality can determine the movement direction of a supramolecular structure, thus expanding the fundamental understanding of the structure and dynamics of soft materials.

o-Phenylene octamers as surface modifiers for homeotropic columnar ordering of discotic liquid crystals.

Large-area homeotropic columnar ordering of π-conjugated discotic liquid crystals (LCs) is crucial for certain device applications but generally hard to achieve. Here we report polymeric o-phenylene octamer poly-1 and its monomer 1 as the first surface modifiers for homeotropic columnar order of a variety of discotic LCs up to a macroscopic length scale. Their octameric o-phenylene parts are known to fold helically into a cylinder that is reminiscent of a π-stacked column of discotic LCs. Through-view X-ray diffraction patterns of 1 suggested that this molecule adheres to the glass substrate and directs its cylindrical axis perpendicular to the glass surface. This "face-on" orientation likely nucleates the homeotropic columnar order of discotic LC materials.

Collective bending motion of a two-dimensionally correlated bowl-stacked columnar liquid crystalline assembly under a shear force.

Stacked teacups inspired the idea that columnar assemblies of stacked bowl-shaped molecules may exhibit a unique dynamic behavior, unlike usual assemblies of planar disc- and rod-shaped molecules. On the basis of the molecular design concept for creating higher-order discotic liquid crystals, found in our group, we synthesized a sumanene derivative with octyloxycarbonyl side chains. This molecule forms an ordered hexagonal columnar mesophase, but unexpectedly, the columnar assembly is very soft, similar to sugar syrup. It displays, upon application of a shear force on solid substrates, a flexible bending motion with continuous angle variations of bowl-stacked columns while preserving the two-dimensional hexagonal order. In general, alignment control of higher-order liquid crystals is difficult to achieve due to their high viscosity. The present system that brings together higher structural order and mechanical softness will spark interest in bowl-shaped molecules as a component for developing higher-order liquid crystals with unique mechanical and stimuli-responsive properties.

Remarkable effects of terminal groups and solvents on helical folding of o-phenylene oligomers.

Although o-phenylene oligomers (OP(n)R) made of dimethoxyphenylene units are thought to be intrinsically dynamic due to π-electronic repulsion, we show that they fold into a regular helical geometry in CH(3)CN when they carry terminal groups such as CH(3), CH(2)OH, Br, CO(2)Bn, and NO(2). We evaluated their helical inversion kinetics via optical resolution of long-chain oligomers (e.g. 16- and 24-mers) by chiral HPLC. OP(24)Br at 298 K shows a half-life for the optical activity of 5.5 h in CH(3)OH/water (7/3 v/v) and requires 34 h for complete racemization. The perfectly folded helical conformers of OP(n)R, unlike their imperfectly folded ones, are devoid of extended π-conjugation and show a cyclic voltammogram featuring reversible multistep oxidation waves.

Design of discotic liquid crystal enabling complete switching along with memory of homeotropic and homogeneous alignment over a large area.

The alignment control of discotic columnar liquid crystals (LCs), featuring a low motility of the constituent molecules and thus having a large viscosity, is a challenging task. Here we show that triphenylene hexacarboxylic ester, when functionalized with hybrid side chains consisting of alkyl and perfluoroalkyl groups in an appropriate ratio, gives a hexagonal columnar (Colh) LC capable of selectively forming large-area uniform homeotropic or homogeneous alignments, upon cooling from its isotropic melt or upon application of a shear force at its LC temperature, respectively. In addition to the alignment switching ability, each alignment state remains persistent unless the LC is heated to its melting temperature. In situ X-ray diffraction analysis under the application of a shear force, together with polarized optical microscopy observations, revealed how the columnar assembly is changed during the alignment-switching process. The remarkable behavior of the discotic LC is discussed in terms of its rheological properties.

Dramatic effect of dispersed carbon nanotubes on the mechanical and electroconductive properties of polymers derived from ionic liquids.

Free-radical polymerization of an imidazolium ion-based ionic liquid bearing a methacrylate group, gelling with single-walled carbon nanotubes (SWNTs), allows fabrication of a mechanically reinforced, electroconductive soft material (bucky plastic). A film sample of this material displays an excellent conductivity of 1 S cm(-1) and a 120-fold enhancement of the Young's modulus at a 7 wt % content of SWNTs. The conductivity is temperature-dependent in the range 5-300 K, suggesting that the conductive process involves carrier hopping. Scanning electron and atomic force micrographs of a bucky plastic film display the presence of crosslinked networks consisting of finely dispersed SWNTs. Such nanotube networks, developed in the polymer matrix, likely suppress slipping of entrapped polymer molecules via a strong interfacial interaction and also facilitate intertubular carrier transport. Although a bucky plastic derived from a vinylimidazolium ion-based ionic liquid monomer shows a comparable conductivity to that of the methacrylate version, the film is brittle irrespective of the presence or absence of SWNTs.

A design principle of polymers processable into 2D homeotropic order.

How to orient polymers homeotropically in thin films has been a long-standing issue in polymer science because polymers intrinsically prefer to lie down. Here we provide a design principle for polymers that are processable into a 2D homeotropic order. The key to this achievement was a recognition that cylindrical polymers can be designed to possess oppositely directed local dipoles in their cross-section, which possibly force polymers to tightly connect bilaterally, affording a 2D rectangular assembly. With a physical assistance of the surface grooves on Teflon sheets that sandwich polymer samples, homeotropic ordering is likely nucleated and gradually propagates upon hot-pressing towards the interior of the film. Consequently, the 2D rectangular lattice is constructed such that its b axis (side chains) aligns along the surface grooves, while its c axis (polymer backbone) aligns homeotropically on a Teflon sheet. This finding paves the way to molecularly engineered 2D polymers with anomalous functions.

Organic thin films. Rational synthesis of organic thin films with exceptional long-range structural integrity.

Highly oriented, domain-boundary-free organic thin films could find use in various high-performance organic materials and devices. However, even with state-of-the-art supramolecular chemistry, it is difficult to construct organic thin films with structural integrity in a size regime beyond the micrometer length scale. We show that a space-filling design, relying on the two-dimensional (2D) nested hexagonal packing of a particular type of triptycene, enables the formation of large-area molecular films with long-range 2D structural integrity up to the centimeter length scale by vacuum evaporation, spin-coating, and cooling from the isotropic liquid of the triptycene. X-ray diffraction analysis and microscopic observations reveal that triptycene molecules form a completely oriented 2D (hexagonal triptycene array) + 1D (layer stacking) structure, which is key for the long-range propagation of structural order.

Redox-responsive molecular helices with highly condensed π-clouds.

Helices have long attracted the attention of chemists, both for their inherent chiral structure and their potential for applications such as the separation of chiral compounds or the construction of molecular machines. As a result of steric forces, polymeric o-phenylenes adopt a tight helical conformation in which the densely packed phenylene units create a highly condensed π-cloud. Here, we show an oligomeric o-phenylene that undergoes a redox-responsive dynamic motion. In solution, the helices undergo a rapid inversion. During crystallization, however, a chiral symmetry-breaking phenomenon is observed in which each crystal contains only one enantiomeric form. Crystals of both handedness are obtained, but in a non-racemic mixture. Furthermore, in solution, the dynamic motion of the helical oligomer is dramatically suppressed by one-electron oxidation. X-ray crystallography of both the neutral and oxidized forms indicated that a hole, generated upon oxidation, is shared by the repeating o-phenylene units. This enables conformational locking of the helix, and represents a long-lasting chiroptical memory.

Unusual side-chain effects on charge-carrier lifetime in discotic liquid crystals.

When hexa-peri-hexabenzocoronene (HBC) carries paraffinic side chains with ester-ether termini (1a-1c), a hexagonal columnar liquid-crystalline (LC) mesophase forms, which is characterized by a very wide temperature range (ca. 0-300 degrees C). The LC materials from these HBC derivatives show characteristic electronic properties with an extremely long photocarrier lifetime. For example, by means of a flash-photolysis time-resolved microwave conductivity technique, the photocarrier lifetime, observed for liquid-crystalline 1a, is as long as 14 ms, which is four-orders of magnitude longer than that of fully paraffinic HBC 4 (0.0011 ms). The maximum transient photoconductivities of liquid-crystalline 1a-1c are comparable to one another and also to those of HBCs without ester-ether terminals. Liquid-crystalline 1a exhibits an obvious photocurrent generation in response to light illumination.

Formation of water-dispersible nanotubular graphitic assembly decorated with isothiouronium ion groups and its supramolecular functionalization.

A newly designed Gemini-shaped hexabenzocoronene amphiphile (1), carrying an isothiouronium ion-appended side chain, self-assembles in CH2Cl2 to form a nanotubular object, whose graphitic wall is densely covered by a positively charged molecular layer of isothiouronium ion pendants. The graphitic nanotube can be dispersed uniformly in aqueous media owing to effective hydration as well as electrostatic repulsion. Post-supramolecular functionalization of the nanotube surface is possible, without disruption of the tubular morphology, by taking advantage of a specific interaction of the isothiouronium ion pendants with oxoanion guests. Mixing with sodium poly(4-styrenesulfonate) results in wrapping of the nanotube, while complexation with an electron-accepting oxoanion such as anthraquinone carboxylate allows photoinduced electron transfer from the graphitic wall to the bound guest molecules.

Stabilization of a kinetically favored nanostructure: surface ROMP of self-assembled conductive nanocoils from a norbornene-appended hexa-peri-hexabenzocoronene.

Newly designed norbornene-appended hexabenzocoronene 1 self-assembles, upon diffusion of an Et(2)O vapor into its CH(2)Cl(2) solution, to form either graphitic nanocoils or nanotubes, depending on the self-assembling conditions. The coiled assembly, selectively formed at 15 degrees C, is a kinetic intermediate for the tubular assembly and transforms into nanotubes on standing at 25 degrees C. However, post-ring-opening metathesis polymerization of the norbornene pendants of 1 enhances the thermal stability of the coiled assembly as well as the tubular one and disables a thermodynamic coil-to-tube transition. The polymerized nanocoils show an electroconductivity of 1 x 10(-)(4) S cm(-)(1) upon doping with I(2), while the nonpolymerized nanocoils are disrupted upon being doped.

Controlled self-assembly triggered by olefin metathesis: cross-linked graphitic nanotubes from an amphiphilic hexa-peri-hexabenzocoronene.

Acyclic diene metathesis (ADMET) in CH2Cl2 of a Gemini-shaped nonionic hexabenzocoronene amphiphile (2), bearing triethylene glycol chains with terminal allylic functionalities, resulted in spontaneous formation of graphitic nanotubes with a cross-linked surface. Without ADMET, 2 did not self-assemble to form a tubular structure due to a high solubility in CH2Cl2. Although 2 formed nanotubes in THF, ADMET on the surface of the preformed nanotubes in THF proceeded only sluggishly and resulted in partial disruption of the tubular structure. The cross-linked nanotubes showed a softening temperature (244 degrees C) higher than that of the uncross-linked version (195 degrees C) and preserved their hollow structure much longer upon heating.

Self-assembled graphitic nanotubes with one-handed helical arrays of a chiral amphiphilic molecular graphene.

Self-assembly of a Gemini-shaped, chiral amphiphilic hexa-peri-hexabenzocoronene having two chiral oxyalkylene side chains, along with two lipophilic side chains, yields graphitic nanotubes with one-handed helical chirality. The nanotubes are characterized by an extremely high aspect ratio of >1,000 and have a uniform diameter of 20 nm and a wall thickness of 3 nm. The nanotubes with right- and left-handed helical senses were obtained from the (S)- and (R)-enantiomers of the amphiphile, respectively, due to an efficient translation of point chirality into supramolecular helical chirality. The (S)- and (R)-enantiomers coassemble at varying mole ratios to give nanotubes, whose circular dichroism profiles are almost unchanged over a wide range of the enantiomeric excess of the amphiphile (100-20%). The high level of chirality amplification thus observed indicates a long-range cooperativity in the self-assembling process. In sharp contrast, a hexabenzocoronene amphiphile with chiral lipophilic side chains did not form nanotubular assemblies. The present work demonstrates the majority rule in noncovalent systems and also may provide a synthetic strategy toward realization of molecular solenoids.

Molecular ordering of organic molten salts triggered by single-walled carbon nanotubes.

When mixed with imidazolium ion-based room-temperature ionic liquid, pristine single-walled carbon nanotubes formed gels after being ground. The heavily entangled nanotube bundles were found to untangle within the gel to form much finer bundles. Phase transition and rheological properties suggest that the gels are formed by physical cross-linking of the nanotube bundles, mediated by local molecular ordering of the ionic liquids rather than by entanglement of the nanotubes. The gels were thermally stable and did not shrivel, even under reduced pressure resulting from the nonvolatility of the ionic liquids, but they would readily undergo a gel-to-solid transition on absorbent materials. The use of a polymerizable ionic liquid as the gelling medium allows for the fabrication of a highly electroconductive polymer/nanotube composite material, which showed a substantial enhancement in dynamic hardness.

Absolute asymmetric photoreactions of aliphatic amino acids by circularly polarized synchrotron radiation: critically pH-dependent photobehavior.

The absolute asymmetric photoreaction (AAP) of racemic aliphatic amino acids, such as alanine (Ala) and leucine (Leu), by left- and right-handed circularly polarized light (l- and r-CPL) irradiation was investigated in aqueous solutions at various pHs, by using the Onuki-type polarizing undulator installed in an electron storage ring. The magnitude of the optical purity (op) generated and the enantiomer-enriching mechanism operative in the AAP were found to be entirely dependent on the ionic state (and thus pH) of the amino/carboxylic acid moieties. At pH 1, the op of Ala and Leu determined by circular dichroism (CD) spectral measurement gradually developed with CPL irradiation, according to Kagan's equation. In contrast, irradiation at pH 7 gave op's much smaller than the theoretical values predicted by Kagan's equation. However, it turned out that the photodecomposition at pH 7 produces the corresponding alpha-hydroxycarboxylic acids stereoselectively, the CD sign of which is just opposite to that of the remaining amino acid, thus affording the apparently small op. It is concluded that, irrespective of solution pH, the AAP of amino acid proceeds upon CPL irradiation. At pH 1, the photodecomposition of valine, Leu, and isoleucine occurs via a Norrish type II mechanism, which is also applicable to other amino acids possessing a gamma-hydrogen. In the case of amino acids lacking a gamma-hydrogen, such as glycine and Ala, the photodecomposition mechanism is a photodeamination/hydroxylation and a Norrish type I reaction. At pH 7, the main photoproducts were ammonia and alpha-hydroxycarboxylic acids that were produced via photodeamination.