A 3D biomimetic model of lymphatics reveals cell-cell junction tightening and lymphedema via a cytokine-induced ROCK2/JAM-A complex.

Impaired lymphatic drainage and lymphedema are major morbidities whose mechanisms have remained obscure. To study lymphatic drainage and its impairment, we engineered a microfluidic culture model of lymphatic vessels draining interstitial fluid. This lymphatic drainage-on-chip revealed that inflammatory cytokines that are known to disrupt blood vessel junctions instead tightened lymphatic cell-cell junctions and impeded lymphatic drainage. This opposing response was further demonstrated when inhibition of rho-associated protein kinase (ROCK) was found to normalize fluid drainage under cytokine challenge by simultaneously loosening lymphatic junctions and tightening blood vessel junctions. Studies also revealed a previously undescribed shift in ROCK isoforms in lymphatic endothelial cells, wherein a ROCK2/junctional adhesion molecule-A (JAM-A) complex emerges that is responsible for the cytokine-induced lymphatic junction zippering. To validate these in vitro findings, we further demonstrated in a genetic mouse model that lymphatic-specific knockout of ROCK2 reversed lymphedema in vivo. These studies provide a unique platform to generate interstitial fluid pressure and measure the drainage of interstitial fluid into lymphatics and reveal a previously unappreciated ROCK2-mediated mechanism in regulating lymphatic drainage.

Quantitative analysis of the three-dimensional trap stiffness of a dielectrophoretic corral trap.

Dielectrophoresis is a robust approach for the manipulation and separation of (bio)particles using microfluidic platforms. We developed a dielectrophoretic corral trap in a microfluidic device that utilizes negative dielectrophoresis to capture single spherical polystyrene particles. Circular-shaped micron-size traps were employed inside the device and the three-dimensional trap stiffness (restoring trapping force from equilibrium trapping location) was analyzed using 4.42 µm particles and 1 MHz of an alternating electric field from 6 VP-P to 10 VP-P . The trap stiffness increased exponentially in the x- and y-direction, and linearly in the z-direction. Image analysis of the trapped particle movements revealed that the trap stiffness is increased 608.4, 539.3, and 79.7% by increasing the voltage from 6 VP-P to 10 VP-P in the x-, y-, and z-direction, respectively. The trap stiffness calculated from a finite element simulation of the device confirmed the experimental results. This analysis provides important insights to predict the trapping location, strength of the trapping, and optimum geometry for single particle trapping and its applications such as single-molecule analysis and drug discovery.

Effect of geometry on dielectrophoretic trap stiffness in microparticle trapping.

Dielectrophoresis, an electrokinetic technique, can be used for contactless manipulation of micro- and nano-size particles suspended in a fluid. We present a 3-D microfluidic DEP device with an orthogonal electrode configuration that uses negative dielectrophoresis to trap spherical polystyrene micro-particles. Traps with three different basic geometric shapes, i.e. triangular, square, and circular, and a fixed trap area of around 900 µm2 were investigated to determine the effect of trap shape on dynamics and strength of particle trapping. Effects of trap geometry were quantitatively investigated by means of trap stiffness, with applied electric potentials from 6 VP-P to 10 VP-P at 1 MHz. Analyzing the trap stiffness with a trapped 4.42 µm spherical particle showed that the triangular trap is the strongest, while the square shape trap is the weakest. The trap stiffness grew more than eight times in triangular traps and six times in both square and circular traps when the potential of the applied electric field was increased from 6 VP-P to 10 VP-P at 1 MHz. With the maximum applied potential, i.e. 10 VP-P at 1 MHz, the stiffness of the triangular trap was 60% and 26% stronger than the square and circular trap, respectively. A finite element model of the microfluidic DEP device was developed to numerically compute the DEP force for these trap shapes. The findings from the numerical computation demonstrate good agreement with the experimental analysis. The analysis of three different trap shapes provides important insights to predict trapping location, strength of the trapping zone, and optimized geometry for high throughput particle trapping.

Rapid PCR kit: lateral flow paper strip with Joule heater for SARS-CoV-2 detection.

Polymerase chain reaction (PCR)-based diagnostic kits for point-of-care (POC) testing are highly desirable to prevent the spread of infectious diseases. Here, we demonstrate a rapid PCR testing kit that involves integrating a lateral flow paper strip with a nichrome-based thin film heater. The use of a paper membrane as a PCR-solution container results in fast thermocycling without a cooler because the membrane can contain the solution with a high specific surface area where Joule heating is applied. After PCR, amplified products are simultaneously detected at the lateral flow paper strip with the naked eye. Severe acute respiratory syndrome ß-coronavirus RNA can be detected within 30 min after PCR solution injection. This work reveals that the paper membrane can act as not only a capillary flow channel but also as a promising platform for fast PCR and detection.

Electrokinetically enhanced label-free plasmonic sensing for rapid detection of tumor-derived extracellular vesicles.

ANALYSIS: of rare circulating extracellular vesicles (EV) from early cancers or different types of host cells requires extremely sensitive EV sensing technologies. Nanoplasmonic EV sensing technologies have demonstrated good analytical performances, but their sensitivity is often limited by EVs' diffusion to the active sensor surface for specific target EV capture. Here, we developed an advanced plasmonic EV platform with electrokinetically enhanced yields (KeyPLEX). The KeyPLEX system effectively overcomes diffusion-limited reactions with applied electroosmosis and dielectrophoresis forces. These forces bring EVs toward the sensor surface and concentrate them in specific areas. Using the keyPLEX, we showed significant improvements in detection sensitivity by ∼100-fold, leading to the sensitive detection of rare cancer EVs from human plasma samples in 10 min. The keyPLEX system could become a valuable tool for point-of-care rapid EV analysis.

Physisorption of Affinity Ligands Facilitates Extracellular Vesicle Detection with Low Non-Specific Binding to Plasmonic Gold Substrates.

Plasmonic biosensors are increasingly being used for the analysis of extracellular vesicles (EVs) originating from disease areas. However, the high non-specific binding of EVs to a gold-sensing surface has been a critical problem and hindered the true translational potential. Here, we report that direct antibody immobilization on the plasmonic gold surface via physisorption shows excellent capture of cancer-derived EVs with ultralow non-specific binding even at very high concentrations. Contrary to commonly used methods that involve thiol-based linker attachment and an EDC/sulfo-NHS reaction, we show a higher specific capture rate and >50-fold lower non-specific on citrate-capped plain and nanopatterned gold surfaces. The method provides a simple, fast, and reproducible means to functionalize plasmonic gold surfaces with antibodies for robust EV biosensing.

Rapid multilayer microfabrication for modeling organotropic metastasis in breast cancer.

Triple-negative breast cancer (TNBC) is one of the most insidious forms of breast cancer with high rates of metastasis, resulting in major mortalities in breast cancer patients. To better understand and treat TNBC metastasis, investigation of TNBC interactions with blood vasculatures is crucial. Among multiple metastatic processes, a step of TNBC exit from the blood vessels ('extravasation') in the pre-metastatic organs determines the final site of the metastasis. Here, we present a rapid multilayer microfabrication method of transferring a three-dimensional (3D) overhang pattern to a substrate with a sacrificial layer to reconstitute a 3D blood vessel surrounded by the extracellular matrix containing organ-specific parenchymal cells. Bones and lungs are the most common sites of breast cancer metastasis. We modeled organotropic bone and lung metastasis in TNBC by introducing subpopulations of TNBC metastases into a vessel lumen surrounded by osteoblasts, bone marrow derived mesenchymal stem cells, and lung fibroblasts. We found that bone-like microenviroment with osteoblasts and mesenchymal stem cells promoted extravasation of the bone-tropic TNBC cells, whereas the lung-like microenviroment promoted extravasation of the lung-tropic TNBC cells. Given that these organ-specific parenchymal cells do not impact vascular permeability, our results suggest that the parenchymal cells dictate selective extravasation of the bone-tropic or lung-tropic TNBC cells in our system.

In vitro modeling of solid tumor interactions with perfused blood vessels.

Molecular crosstalk between intra-tumor blood vessels and tumor cells plays many critical roles in tumorigenesis and cancer metastasis. However, it has been very difficult to investigate the biochemical mechanisms underlying the overlapping, multifactorial processes that occur at the tumor-vascular interface using conventional murine models alone. Moreover, traditional two-dimensional (2D) culture models used in cancer research do not recapitulate aspects of the 3D tumor microenvironment. In the present study, we introduce a microfluidic model of the solid tumor-vascular interface composed of a human umbilical vein endothelial cell (HUVEC)-lined, perfusable, bioengineered blood vessel and tumor spheroids embedded in an extracellular matrix (ECM). We sought to optimize our model by varying the composition of the tumor spheroids (MDA-MB-231 breast tumor cells + mesenchymal stem cells (MSCs)/human lung fibroblasts (HLFs)/HUVECs) and the extracellular matrix (ECM: collagen, Matrigel, and fibrin gels with or without free HLFs) that we used. Our results indicate that culturing tumor spheroids containing MDA-MB-231 cells + HUVECs in an HLF-laden, fibrin-based ECM within our microfluidic device optimally (1) enhances the sprouting and migration of tumor spheroids, (2) promotes angiogenesis, (3) facilitates vascular invasion, and (4) preserves the structural integrity and functionality of HUVEC-lined microfluidic channels. This model may provide a platform for drug screening and mechanism studies on solid tumor interactions with functional blood vessels.

Localized Dielectric Loss Heating in Dielectrophoresis Devices.

Temperature increases during dielectrophoresis (DEP) can affect the response of biological entities, and ignoring the effect can result in misleading analysis. The heating mechanism of a DEP device is typically considered to be the result of Joule heating and is overlooked without an appropriate analysis. Our experiment and analysis indicate that the heating mechanism is due to the dielectric loss (Debye relaxation). A temperature increase between interdigitated electrodes (IDEs) has been measured with an integrated micro temperature sensor between IDEs to be as high as 70 °C at 1.5 MHz with a 30 Vpp applied voltage to our ultra-low thermal mass DEP device. Analytical and numerical analysis of the power dissipation due to the dielectric loss are in good agreement with the experiment data.

Nanoinjection system for precise direct delivery of biomolecules into single cells.

Intracellular delivery of functional molecules such as proteins, transcription factors and DNA is effective and promising in cell biology. However, existing transfection methods are often unsuitable to deliver big molecules into cells or require carriers such as viruses and peptides specific to the target molecules. In addition, the nature of bulk processing does not generally provide accurate dose control of individual cells. The concept of single-cell-based material injection based on electrokinetic pumping through nanocapillaries could overcome these problems, yet the fabrication and operation of nanoscale 3-dimensional structures have remained unsolved. In this research, a hybrid (PDMS/glass) microfluidic chip with a true 3-dimensional nanoinjection structure (called "nanoinjection system") is presented. The nanoinjection structure was fabricated by femtosecond-laser (fs-laser) ablation in a single solid glass, which showed very successful delivery of red fluorescent protein (RFP) and expression of plasmid DNA in several different types of cells. This system is promising in that the amount of molecules to be delivered is controllable and the processed cells are systematically separated into a harvesting chamber, which can radically improve the purity of the processed cells. In addition, it was confirmed that the cells were healthy even after the molecule injection for a few seconds, indicating that the injection time can be significantly elongated, further improving the delivery efficiency of biomolecules without affecting the cell viability. We envision that the nanoinjection system having the major features of being carrier-free and dose-controllable, having an unlimited injection period, and ease of harvesting will greatly contribute to the next-generation research studies in the fields of cell biology and cell therapeutics.

Iridium Oxide-reduced Graphene Oxide Nanohybrid Thin Film Modified Screen-printed Electrodes as Disposable Electrochemical Paper Microfluidic pH Sensors.

A facile, controllable, inexpensive and green electrochemical synthesis of IrO2-graphene nanohybrid thin films is developed to fabricate an easy-to-use integrated paper microfluidic electrochemical pH sensor for resource-limited settings. Taking advantages from both pH meters and strips, the pH sensing platform is composed of hydrophobic barrier-patterned paper micropad (µPAD) using polydimethylsiloxane (PDMS), screen-printed electrode (SPE) modified with IrO2-graphene films and molded acrylonitrile butadiene styrene (ABS) plastic holder. Repetitive cathodic potential cycling was employed for graphene oxide (GO) reduction which can completely remove electrochemically unstable oxygenated groups and generate a 2D defect-free homogeneous graphene thin film with excellent stability and electronic properties. A uniform and smooth IrO2 film in nanoscale grain size is anodically electrodeposited onto the graphene film, without any observable cracks. The resulting IrO2-RGO electrode showed slightly super-Nernstian responses from pH 2-12 in Britton-Robinson (B-R) buffers with good linearity, small hysteresis, low response time and reproducibility in different buffers, as well as low sensitivities to different interfering ionic species and dissolved oxygen. A simple portable digital pH meter is fabricated, whose signal is measured with a multimeter, using high input-impedance operational amplifier and consumer batteries. The pH values measured with the portable electrochemical paper-microfluidic pH sensors were consistent with those measured using a commercial laboratory pH meter with a glass electrode.

Convex Grooves in Staggered Herringbone Mixer Improve Mixing Efficiency of Laminar Flow in Microchannel.

The liquid streams in a microchannel are hardly mixed to form laminar flow, and the mixing issue is well described by a low Reynolds number scheme. The staggered herringbone mixer (SHM) using repeated patterns of grooves in the microchannel have been proved to be an efficient passive micro-mixer. However, only a negative pattern of the staggered herringbone mixer has been used so far after it was first suggested, to the best of our knowledge. In this study, the mixing efficiencies from negative and positive staggered herringbone mixer patterns as well as from opposite flow directions were tested to investigate the effect of the micro-structure geometry on the surrounding laminar flow. The positive herringbone pattern showed better mixing efficiency than the conventionally used negative pattern. Also, generally used forward flow gives better mixing efficiency than reverse flow. The mixing was completed after two cycles of staggered herringbone mixer with both forward and reverse flow in a positive pattern. The traditional negative pattern showed complete mixing after four and five cycles in forward and reverse flow direction, respectively. The mixing effect in all geometries was numerically simulated, and the results confirmed more efficient mixing in the positive pattern than the negative. The results can further enable the design of a more efficient microfluidic mixer, as well as in depth understanding of the phenomena of positive and negative patterns existing in nature with regards to the surrounding fluids.

Biaxial Dielectrophoresis Force Spectroscopy: A Stoichiometric Approach for Examining Intermolecular Weak Binding Interactions.

The direct quantification of weak intermolecular binding interactions is very important for many applications in biology and medicine. Techniques that can be used to investigate such interactions under a controlled environment, while varying different parameters such as loading rate, pulling direction, rupture event measurements, and the use of different functionalized probes, are still lacking. Herein, we demonstrate a biaxial dielectrophoresis force spectroscopy (BDFS) method that can be used to investigate weak unbinding events in a high-throughput manner under controlled environments and by varying the pulling direction (i.e., transverse and/or vertical axes) as well as the loading rate. With the BDFS system, we can quantitatively analyze binding interactions related to hydrogen bonding or ionic attractions between functionalized microbeads and a surface within a microfluidic device. Our BDFS system allowed for the characterization of the number of bonds involved in an interaction, bond affinity, kinetic rates, and energy barrier heights and widths from different regimes of the energy landscape.