Polycyclic aromatic hydrocarbons (PAHs) in blood serum of adults living in high and low-traffic volume areas in Malaysia: A comparative cross-sectional study.

Ambient polycyclic aromatic hydrocarbons (PAHs) originate predominantly from fuel combustion of motor vehicles and have the potential to affect human health. However, there is insufficient knowledge regarding serum PAHs health risks among the Malaysian population. This study aims to compare PAH concentrations, distributions, correlations, and health risks in 202 blood serum samples drawn from residents living in high-traffic volume areas (Kuala Lumpur) and low-traffic volume areas (Hulu Langat) in Malaysia. Solid phase extraction and gas chromatography-mass spectrometry (GC-MS) were employed to extract and analyze blood serum samples. Questionnaires were distributed to obtain sociodemographic and contributing factors of serum PAHs. The mean total PAHs concentration in serum of the Kuala Lumpur group was 54.44 ng g-1 lipids, double the Hulu Langat group's concentration (25.7 ng g-1 lipids). Indeno(1,2,3-cd)pyrene (IcP) and acenaphthene (ACP) feature the most and least abundant compounds in both study groups. The mean concentrations of IcP and ACP in the Kuala Lumpur and Hulu Langat groups were 26.8 vs 12.68 and 0.27 vs 0.14 ng g-1 lipids, respectively. High-molecular-weight PAHs (HMW-PAHs) composed 85% of serum total PAHs in both groups. Significant correlations were found (i) between the individual serum PAH congeners (p < 0.01) and (ii) between serum PAHs and total lipids (p < 0.01). According to the questionnaire data, high traffic volume and outdoor hobbies were the only contributory factors that confirmed significant relationships with serum PAHs (p < 0.001). Health risk assessment was computed using benzo(a)pyrene (BaP) equivalent (BaPeq) and demonstrated that the Kuala Lumpur group has twofold greater carcinogenic risk than the Hulu Langat group (16.11 vs 7.76 ng g-1 lipids). Our study reveals that traffic volumes notably impact serum PAH levels and general health among the Malaysian population.

The Impacts and Analysis of Individual and Social Risks of the Stochastic Emission of Benzene from Floating-Roof Tanks Using Response Surface Analysis and MPACT Model.

In the present study, the researchers used an integrated approach composed of response surface analysis (RSM) and MPACT model to predict fatality rates caused by benzene emitted from floating-roof tanks. RSM scenarios were configured in Expert Design (version 7.0) software using the central composite design (CCD) method and five variables of wind speed, relative humidity, atmospheric temperature, failure diameter, and emission height were considered. Continuous Pasquill-Gifford Gaussian model was used to estimate the results of the RSM scenarios. The response values were considered for exposure concentrations above 50 ppm (slight damages), 150 ppm (moderate damage), and 1000 ppm (high damage). The analysis of individual and social risks for each scenario was done using the MPACT model in SAFETI program (version 8.22) by providing two variables of population characteristics and the frequency of tank wall failure. The results showed that atmospheric temperature, wind speed, failure diameter, and emission height have positive effects on the dispersion of the cloud of toxic benzene vapor with a concentration of 1000 ppm. Intolerable individual risk distances were estimated to be lower for indoor environments than for outdoor. Maximum distances of intolerable individual risks for the worst-case scenarios were estimated up to 2500 m from the emission point, which resulted from exposure to a concentration of 1000-ppm benzene. Results regarding the estimation of social risks showed that over 1600 fatalities should be expected under the worst-case scenarios. The three factors of high temperature, low wind speed, and low emission height play a major role in the occurrence of scenarios with the highest fatalities. High wind speed and high emission height were the most important factors in most scenarios with zero fatalities rate. Generally, the findings of this study show the necessity to provide an emergency response plan in the studied industry in both autumn and winter due to low wind speed. However, the coupling of the developed statistical models based on regional meteorological conditions with the MPACT model can help researchers to design an emergency response plan to deal with leakage incidents in petrochemical industries.

Seasonal variations of particle number concentration and its relationship with PM2.5 mass concentration in industrial-residential airshed.

The smaller particles that dominate the particle number concentration (PNC) in the ambient air only contribute to a small percentage of particulate matter (PM) mass concentration although present in high particle number concentration. These small particles may be neglected upon assessing the health impacts of the PM. Hence, the knowledge on the particle number concentration size distribution deserves greater attention than the particulate mass concentration. This study investigates the measurement of the particle mass concentrations (PM2.5) and PNC of 0.27 µm < Dp < 4.50 µm during the southwest (SW), inter-monsoon (IM) and northeast (NE) monsoons in the industrial-residential airshed of Skudai, Johor Bahru, Malaysia. The PM2.5 mass concentrations and PNC were measured using a multi-channel GRIMM Environmental Dust Monitor (GRIMM EDM-SVC 365) equipped with a global positioning system. Diurnal variations, statistical analysis and regression plots were utilised from a six-month hourly data set to examine the patterns of the PNC size distributions and its relationships with the PM2.5 mass concentration. The overall mean PM2.5 mass concentration was 21.85 µg m-3, with the 24 h mean values of 26.80 µg m-3, 26.08 µg m-3 and 13.76 µg m-3 for the SW, IM and NE monsoons, respectively. It was found that the hourly mean of PNC was recorded at the highest concentration during the SW monsoon (373.20 # cm-3). The particles in the accumulation mode (Dp < 1.0 µm) were the prevalent form of the particle number concentration (94-98%). The scatter plots between the PM2.5 mass concentration and particle number size distribution showed that the PNC mode of 0.27 < Dp < 1.0 µm has the highest correlation value of r2 = 0.87 due to the emission from the anthropogenic activities. The results of this study highlight the importance of the PNC measurement in the seasonal variations of the PM2.5 pollution, indicating the significance of the regional-scale emission control actions in the local air quality management.

A floating chamber system for VOC sea-to-air flux measurement near the sea surface.

Volatile organic compounds (VOCs) form ozone (O3) and secondary organic aerosols (SOAs) in the atmosphere under favourable conditions. Biogenic VOC levels in the marine atmosphere are significantly lower compared with levels in the atmosphere above terrestrial ecosystems. However, much less is known about the marine biogenic VOC sea-to-air flux, specifically at the sea surface level. Therefore, here we describe a newly developed and cost-effective floating chamber system that has the capacity to measure the VOC sea-to-air flux near the sea surface (< 1 m). The floating chamber is coupled with adsorbent cartridges, and samples were analysed in the laboratory using commercial thermal desorption and gas chromatography mass spectrometry (TD-GC-MS). The structural performance of the floating flux chamber was evaluated, and it was shown to have the capacity to stay continuously afloat for up to 72 h in various conditions (e.g., rainy, windy) and with wave heights up to approximately 1 m in coastal waters. Preliminary measurements of isoprene (3-Methyl-1,2-butadiene) (C5H8) sea-to-air flux using the floating flux chamber in the coastal waters off the east coast of Peninsular Malaysia found values in the region of 107 molecules/cm2/s, comparable with most published values based on various flux measurement techniques. We suggest the proposed floating chamber system could serve as a cost-effective VOC flux technique that allows measurements near the sea surface.

Antibiotic resistance of airborne bacterial populations in a hospital environment.

Bacteria in a hospital environment potentially cause hospital-acquired infections (HAIs), particularly in immunocompromised individuals. Treatments of HAIs with antibiotics, however, are ineffective due to the emergence of antibiotic-resistant bacteria (ARB). This study aims to identify airborne bacteria in a tertiary hospital in Malaysia and screen for their resistance to commonly used broad-spectrum antibiotics. Airborne bacteria were sampled using active sampling at the respiratory ward (RW), physician clinic (PC) and emergency department (ED). Physical parameters of the areas were recorded, following the Industry Code of Practice on Indoor Air Quality 2010 (ICOP IAQ 2010). Bacterial identification was based on morphological and biochemical tests. Antibiotic resistance screening was carried out using the Kirby-Bauer disk diffusion method. Results showed that the highest bacterial population was found in the highest density occupancy area, PC (1024 ± 54 CFU/m3), and exceeded the acceptable limit. Micrococcus spp., Staphylococcus aureus, α- and ß-Streptococcus spp., Bacillus spp. and Clostridium spp. colonies were identified at the sampling locations. The antibiotic resistance screening showed a vast percentage of resistance amongst the bacterial colonies, with resistance to ampicillin observed as the highest percentage (Micrococcus spp.: 95.2%, S. aureus: 100%, Streptococcus spp.: 75%, Bacillus spp.: 100% and Clostridium spp.: 100%). This study provides awareness to healthcare practitioners and the public on the status of the emergence of ARB in a hospital environment. Early detection of bacterial populations and good management of hospital environments are important prevention measures for HAI.

Spatial and Temporal Variations in Nutrients During Upwelling Season Off the East Coast of Peninsular Malaysia.

This study determines the bulk surface water (BSW) dissolved inorganic nutrients of nitrogen (DINi) and phosphate (DIP) during the upwelling season off the east coast of Peninsular Malaysia, South China Sea. BSW samples were analysed for DINi and DIP by using a standard automated colorimetric method. BSW DINi and DIP concentrations varied between 0.11 and 2.55 µM (mean 1.12 ± 0.63 µM), and below detection limit, and 0.29 µM (mean 0.11 ± 0.08 µM), respectively. The spatial distribution of higher concentrations between DINi and DIP was distinct. However, the highest concentrations of DINi and DIP were mostly recorded in the month of peak upwelling (July and August), where colder BSW temperatures were also encountered during field sampling. This study provides new evidence on the presence of BSW nutrients of DINi and DIP during upwelling season peak in July and August before their decline in September.

The Role of Extracellular Carbonic Anhydrase in Biogeochemical Cycling: Recent Advances and Climate Change Responses.

Climate change has been predicted to influence the marine phytoplankton community and its carbon acquisition strategy. Extracellular carbonic anhydrase (eCA) is a zinc metalloenzyme that catalyses the relatively slow interconversion between HCO3- and CO2. Early results indicated that sub-nanomolar levels of eCA at the sea surface were sufficient to enhance the oceanic uptake rate of CO2 on a global scale by 15%, an addition of 0.37 Pg C year-1. Despite its central role in the marine carbon cycle, only in recent years have new analytical techniques allowed the first quantifications of eCA and its activity in the oceans. This opens up new research areas in the field of marine biogeochemistry and climate change. Light and suitable pH conditions, as well as growth stage, are crucial factors in eCA expression. Previous studies showed that phytoplankton eCA activity and concentrations are affected by environmental stressors such as ocean acidification and UV radiation as well as changing light conditions. For this reason, eCA is suggested as a biochemical indicator in biomonitoring programmes and could be used for future response prediction studies in changing oceans. This review aims to identify the current knowledge and gaps where new research efforts should be focused to better determine the potential feedback of phytoplankton via eCA in the marine carbon cycle in changing oceans.

Air pollution impacts from COVID-19 pandemic control strategies in Malaysia.

Mitigation measures and control strategies relating to novel coronavirus disease 2019 (COVID-19) have been widely applied in many countries in order to reduce the transmission of this pandemic disease. A Movement Control Order (MCO) was implemented in Malaysia starting from the March 18, 2020 as a pandemic control strategy which restricted all movement and daily outdoor activities. To investigate the impact of MCO, air pollutants: particulate matter with an aerodynamic diameter less than 10 µm (PM10), particulate matter with an aerodynamic diameter less than 2.5 µm (PM2.5), sulphur dioxide (SO2), nitrogen dioxide (NO2), ozone (O3) and carbon monoxide (CO) in nine major cities in Malaysia were measured before and during the implementation of the MCO. The non-carcinogenic health risk assessments of the air pollutants are also determined using the United States Environmental Protection Agency (USEPA) Health Risk Assessment method. Overall, NO2 recorded an average percentage reduction of 40% with the highest reduction observed at Kota Kinabalu (62%). The largest reductions of PM10, PM2.5, SO2, O3 and CO were recorded at Kota Kinabalu (17%), Kuantan (9.5%), Alor Star (38%), Kota Bharu (15%), and Ipoh (27%) respectively. All cities had hazard quotient (HQ) values of <1 suggesting no non-carcinogenic health effects. The highest HQ was observed for PM2.5 during the MCO period (4.53E-02) in Kuala Lumpur. An average hazard index (HI) value of 1.44E-01 (before the MCO) and 1.40E-01 (during the MCO) showed higher human health risks before the MCO than during the MCO. This study gives confidence to regulatory bodies that the reduction of human activities significantly reduces air pollution and increases human health and so good air pollution control strategies can provide crucial impacts, especially in reducing air pollution and improving human health.

PM2.5 and ozone in office environments and their potential impact on human health.

It is important to have good indoor air quality, especially in indoor office environments, in order to enhance productivity and maintain good work performance. This study investigated the effects of indoor office activities on particulate matter of less than 2.5 µm (PM2.5) and ozone (O3) concentrations, assessing their potential impact on human health. Measurements of indoor PM2.5 and O3 concentrations were taken every 24 h during the working days in five office environments located in a semi-urban area. As a comparison, the outdoor concentrations were derived from the nearest Continuous Air Quality Monitoring Station. The results showed that the average 24 h of indoor and outdoor PM2.5 concentrations were 3.24 ± 0.82 µg m-3 and 17.4 ± 3.58 µg m-3 respectively, while for O3 they were 4.75 ± 4.52 ppb and 21.5 ± 5.22 ppb respectively. During working hours, the range of PM2.5 concentrations were 1.00 µg m-3 to 6.10 µg m-3 while for O3 they were 0.10 ppb to 38.0 ppb. The indoor to outdoor ratio (I/O) for PM2.5 and O3 was <1, thus indicating a low infiltration of outdoor sources. The value of the hazard quotient (HQ) for all sampling buildings was <1 for both chronic and acute exposures, indicating that the non-carcinogenic risks are negligible. Higher total cancer risk (CR) value for outdoors (2.67E-03) was observed compared to indoors (4.95E-04) under chronic exposure while the CR value for acute exposure exceeded 1.0E-04, thus suggesting a carcinogenic PM2.5 risk for both the indoor and outdoor environments. The results of this study suggest that office activities, such as printing and photocopying, affect indoor O3 concentrations while PM2.5 concentrations are impacted by indoor-related contributions.

Observations of BTEX in the ambient air of Kuala Lumpur by passive sampling.

Benzene, toluene, ethylbenzene and xylenes (BTEX) are well known hazardous volatile organic compounds (VOCs) due to their human health risks and photochemical effects. The main objective of this study was to estimate BTEX levels and evaluate interspecies ratios and ozone formation potentials (OFP) in the ambient air of urban Kuala Lumpur (KL) based on a passive sampling method with a Tenax® GR adsorbent tube. Analysis of BTEX was performed using a thermal desorption (TD)-gas chromatography mass spectrometer (GCMS). OFP was calculated based on the Maximum Incremental Reactivity (MIR). Results from this study showed that the average total BTEX during the sampling period was 66.06 ± 2.39 µg/m3. Toluene (27.70 ± 0.97 µg/m3) was the highest, followed by m,p-xylene (13.87 ± 0.36 µg/m3), o-xylene (11.49 ± 0.39 µg/m3), ethylbenzene (8.46 ± 0.34 µg/m3) and benzene (3.86 ± 0.31 µg/m3). The ratio of toluene to benzene (T:B) is > 7, suggesting that VOCs in the Kuala Lumpur urban environment are influenced by vehicle emissions and other anthropogenic sources. The average of ozone formation potential (OFP) value from BTEX was 278.42 ± 74.64 µg/m3 with toluene and xylenes being the major contributors to OFP. This study also indicated that the average of benzene concentration in KL was slightly lower than the European Union (EU)-recommended health limit value for benzene of 5 µg/m3 annual exposure.

The exposure of children to PM2.5 and dust in indoor and outdoor school classrooms in Kuala Lumpur City Centre.

It is important to assess indoor air quality in school classrooms where the air quality may significantly influence school children's health and performance. This study aims to determine the concentrations of PM2.5 and dust chemical compositions in indoor and outdoor school classroom located in Kuala Lumpur City Centre. The PM2.5 concentration was measured from 19th September 2017-16th February 2018 using an optical PM2.5 sensor. Indoor and outdoor dust was also collected from the school classrooms and ion and trace metal concentrations were analysed using ion chromatography (IC) and inductively couple plasma-mass spectrometry (ICP-MS) respectively. This study showed that the average indoor and outdoor 24 h PM2.5 was 11.2 ±â€¯0.45 µg m-3 and 11.4 ±â€¯0.44 µg m-3 respectively. The 8 h PM2.5 concentration ranged between 3.2 and 28 µg m-3 for indoor and 3.2 and 19 µg m-3 for outdoor classrooms. The highest ion concentration in indoor dust was Ca2+ with an average concentration of 38.5 ±â€¯35.0 µg g-1 while for outdoor dust SO42- recorded the highest ion concentration with an average concentration of 30.6 ±â€¯9.37 µg g-1. Dominant trace metals in both indoor and outdoor dust were Al, Fe and Zn. Principle component analysis-multiple linear regression (PCA-MLR) demonstrated that the major source of indoor dust was road dust (69%), while soil dominated the outdoor dust (74%). Health risk assessment showed that the hazard quotient (HQ) value for non-carcinogenic trace metals was < 1 while the total cancer risk (CR) value for carcinogenic elements was below the acceptable limit for both indoor and outdoor dust through dermal and inhalation pathways, but not the ingestion pathway. This study suggests indoor contributions of PM2.5 concentrations are due to the activities of the school children while the compositions of indoor and outdoor dust are greatly influenced by the soil/earth source plus industrial and traffic contribution.

Risk of concentrations of major air pollutants on the prevalence of cardiovascular and respiratory diseases in urbanized area of Kuala Lumpur, Malaysia.

Rapid urbanisation in Malaysian cities poses risks to the health of residents. This study aims to estimate the relative risk (RR) of major air pollutants on cardiovascular and respiratory hospitalisations in Kuala Lumpur. Daily hospitalisations due to cardiovascular and respiratory diseases from 2010 to 2014 were obtained from the Hospital Canselor Tuanku Muhriz (HCTM). The trace gases, PM10 and weather variables were obtained from the Department of Environment (DOE) Malaysia in consistent with the hospitalisation data. The RR was estimated using a Generalised Additive Model (GAM) based on Poisson regression. A "lag" concept was used where the analysis was segregated into risks of immediate exposure (lag 0) until exposure after 5 days (lag 5). The results showed that the gases could pose significant risks towards cardiovascular and respiratory hospitalisations. However, the RR value of PM10 was not significant in this study. Immediate effects on cardiovascular hospitalisations were observed for NO2 and O3 but no immediate effect was found on respiratory hospitalisations. Delayed effects on cardiovascular and respiratory hospitalisations were found with SO2 and NO2. The highest RR value was observed at lag 4 for respiratory admissions with SO2 (RR = 1.123, 95% CI = 1.045-1.207), followed by NO2 at lag 5 for cardiovascular admissions (RR = 1.025, 95% CI = 1.005-1.046). For the multi-pollutant model, NO2 at lag 5 showed the highest risks towards cardiovascular hospitalisations after controlling for O3 8 h mean lag 1 (RR = 1.026, 95% CI = 1.006-1.047), while SO2 at lag 4 showed highest risks towards respiratory hospitalisations after controlling for NO2 lag 3 (RR = 1.132, 95% CI = 1.053-1.216). This study indicated that exposure to trace gases in Kuala Lumpur could lead to both immediate and delayed effects on cardiovascular and respiratory hospitalisations.

Anionic Surfactants and Traffic Related Emission from an Urban Area of Perak, Malaysia.

Anionic surfactants are one of the pollutants derived from particulate matter (PM) and adversely affect the health of living organisms. In this study, the compositions of surfactants extracted from PM and vehicle soot collected in an urban area were investigated. A high-volume air sampler was used to collect PM sample at urban area based on coarse (> 1.5 µm) and fine (< 1.5 µm) mode particles. Meanwhile, the vehicle soot was collected randomly from the exhaust pipe of various types of diesel and petrol vehicles using a soft brush during dry days. The concentration of anionic surfactants, such as Methylene Blue Active Substances (MBAS), was determined by the colorimetric method using UV-Vis Spectrophotometer. Morphological properties of the PM and exhaust soot sample was studied using field-emission scanning electron microscope. Results revealed that the MBAS concentration was dominated by fine mode particles (6.03 ± 3.97 µmol g-1), whereas heavy-duty vehicles, such as buses, demonstrated the highest surfactant concentration with an average value of 0.340 ± 0.180 µmol g-1. The structure of collected PM for all samples mostly appeared to be an irregular shape with the size range of ultrafine particles (0.05-0.2 µm). The emission of surfactants from diesel and petrol vehicles, especially at urban areas, should be a major concern, because they could negatively affect human health and the environment.

Indoor air quality-induced respiratory symptoms of a hospital staff in Iran.

The ambient air of hospitals contains a wide range of biological and chemical pollutants. Exposure to these indoor pollutants can be hazardous to the health of hospital staff. This study aims to evaluate the factors affecting indoor air quality and their effect on the respiratory health of staff members in a busy Iranian hospital. We surveyed 226 hospital staff as a case group and 222 office staff as a control group. All the subjects were asked to fill in a standard respiratory questionnaire. Pulmonary function parameters were simultaneously measured via a spirometry test. Environmental measurements of bio-aerosols, particulate matter, and volatile organic compounds in the hospital and offices were conducted. T-tests, chi-square tests, and multivariable logistic regressions were used to analyze the data. The concentration of selected air pollutants measured in the hospital wards was more than those in the administrative wards. Parameters of pulmonary functions were not statistically significant (p > 0.05) between the two groups. However, respiratory symptoms such as coughs, phlegm, phlegmatic coughs, and wheezing were more prevalent among the hospital staff. Laboratory staff members were more at risk of respiratory symptoms compared to other occupational groups in the hospital. The prevalence of sputum among nurses was significant, and the odds ratio for the presence of phlegm among nurses was 4.61 times greater than office staff (p = 0.002). The accumulation of indoor pollutants in the hospital environment revealed the failure of hospital ventilation systems. Hence, the design and implementation of an improved ventilation system in the studied hospital is recommended.

Distribution of Surfactants in the Sea Surface Microlayer and Sub-surface Water in the Melaka River Estuary.

This study determines the levels of surfactants at 12 stations located in the Melaka River Estuary. This river estuary is located within a tourism area of Melaka Historical City. The concentrations of anionic and cationic surfactants in the sea surface microlayer (SML) and sub-surface water (SSW) were determined by using two colorimetric methods, methylene blue active substances (MBASs) and disulphine blue active substances (DBASs), respectively. The results showed that cationic surfactants as DBAS (ranging between 0.19 and 0.25 µmol L-1) dominated the concentrations of surfactants in SML. The enrichment factor (Ef) between MBAS and DBAS in the SML and SSW ranged between 1.0 and 2.0, and 1.0 to 1.4, respectively. There was no significant correlation (p > 0.05) between MBAS and DBAS for both SML and SSW. Nevertheless, there were strong correlations (p < 0.05) between both MBAS and DBAS in the SML and SSW. The results showed the potential contribution of degradation processes of organic substances microorganisms in SSW towards the concentrations of surfactants in SML. Compared to previous studies, tourism-related activities may influence the concentrations of surfactants, especially DBAS, in this river estuary.

Health impact assessment from building life cycles and trace metals in coarse particulate matter in urban office environments.

This study intends to determine the health impacts from two office life cycles (St.1 and St.2) using life cycle assessment (LCA) and health risk assessment of indoor metals in coarse particulates (particulate matter with diameters of less than 10µm). The first building (St.1) is located in the city centre and the second building (St.2) is located within a new development 7km away from the city centre. All life cycle stages are considered and was analysed using SimaPro software. The trace metal concentrations were determined by inductively couple plasma-mass spectrometry (ICP-MS). Particle deposition in the human lung was estimated using the multiple-path particle dosimetry model (MPPD). The results showed that the total human health impact for St.1 (0.027 DALY m-2) was higher than St.2 (0.005 DALY m-2) for a 50-year lifespan, with the highest contribution from the operational phase. The potential health risk to indoor workers was quantified as a hazard quotient (HQ) for non-carcinogenic elements, where the total values for ingestion contact were 4.38E-08 (St.1) and 2.59E-08 (St.2) while for dermal contact the values were 5.12E-09 (St.1) and 2.58E-09 (St.2). For the carcinogenic risk, the values for dermal and ingestion routes for both St.1 and St.2 were lower than the acceptable limit which indicated no carcinogenic risk. Particle deposition for coarse particles in indoor workers was concentrated in the head, followed by the pulmonary region and tracheobronchial tract deposition. The results from this study showed that human health can be significantly affected by all the processes in office building life cycle, thus the minimisation of energy consumption and pollutant exposures are crucially required.

Calibration Model of a Low-Cost Air Quality Sensor Using an Adaptive Neuro-Fuzzy Inference System.

Conventional air quality monitoring systems, such as gas analysers, are commonly used in many developed and developing countries to monitor air quality. However, these techniques have high costs associated with both installation and maintenance. One possible solution to complement these techniques is the application of low-cost air quality sensors (LAQSs), which have the potential to give higher spatial and temporal data of gas pollutants with high precision and accuracy. In this paper, we present DiracSense, a custom-made LAQS that monitors the gas pollutants ozone (O3), nitrogen dioxide (NO2), and carbon monoxide (CO). The aim of this study is to investigate its performance based on laboratory calibration and field experiments. Several model calibrations were developed to improve the accuracy and performance of the LAQS. Laboratory calibrations were carried out to determine the zero offset and sensitivities of each sensor. The results showed that the sensor performed with a highly linear correlation with the reference instrument with a response-time range from 0.5 to 1.7 min. The performance of several calibration models including a calibrated simple equation and supervised learning algorithms (adaptive neuro-fuzzy inference system or ANFIS and the multilayer feed-forward perceptron or MLP) were compared. The field calibration focused on O3 measurements due to the lack of a reference instrument for CO and NO2. Combinations of inputs were evaluated during the development of the supervised learning algorithm. The validation results demonstrated that the ANFIS model with four inputs (WE OX, AE OX, T, and NO2) had the lowest error in terms of statistical performance and the highest correlation coefficients with respect to the reference instrument (0.8 < r < 0.95). These results suggest that the ANFIS model is promising as a calibration tool since it has the capability to improve the accuracy and performance of the low-cost electrochemical sensor.

Source apportionment and health risk assessment of PM10 in a naturally ventilated school in a tropical environment.

This study aimed to investigate the chemical composition and potential sources of PM10 as well as assess the potential health hazards it posed to school children. PM10 samples were taken from classrooms at a school in Kuala Lumpur's city centre (S1) and one in the suburban city of Putrajaya (S2) over a period of eight hours using a low volume sampler (LVS). The composition of the major ions and trace metals in PM10 were then analysed using ion chromatography (IC) and inductively coupled plasma-mass spectrometry (ICP-MS), respectively. The results showed that the average PM10 concentration inside the classroom at the city centre school (82µg/m(3)) was higher than that from the suburban school (77µg/m(3)). Principal component analysis-absolute principal component scores (PCA-APCS) revealed that road dust was the major source of indoor PM10 at both school in the city centre (36%) and the suburban location (55%). The total hazard quotient (HQ) calculated, based on the formula suggested by the United States Environmental Protection Agency (USEPA), was found to be slightly higher than the acceptable level of 1, indicating that inhalation exposure to particle-bound non-carcinogenic metals of PM10, particularly Cr exposure by children and adults occupying the school environment, was far from negligible.

Modeling air quality in main cities of Peninsular Malaysia by using a generalized Pareto model.

The air pollution index (API) is an important figure used for measuring the quality of air in the environment. The API is determined based on the highest average value of individual indices for all the variables which include sulfur dioxide (SO2), nitrogen dioxide (NO2), carbon monoxide (CO), ozone (O3), and suspended particulate matter (PM10) at a particular hour. API values that exceed the limit of 100 units indicate an unhealthy status for the exposed environment. This study investigates the risk of occurrences of API values greater than 100 units for eight urban areas in Peninsular Malaysia for the period of January 2004 to December 2014. An extreme value model, known as the generalized Pareto distribution (GPD), has been fitted to the API values found. Based on the fitted model, return period for describing the occurrences of API exceeding 100 in the different cities has been computed as the indicator of risk. The results obtained indicated that most of the urban areas considered have a very small risk of occurrence of the unhealthy events, except for Kuala Lumpur, Malacca, and Klang. However, among these three cities, it is found that Klang has the highest risk. Based on all the results obtained, the air quality standard in urban areas of Peninsular Malaysia falls within healthy limits to human beings.

Physicochemical factors and sources of particulate matter at residential urban environment in Kuala Lumpur.

Long-term measurements (2004-2011) of PM10 (particulate matter with an aerodynamic diameter <10 µm) and trace gases (carbon monoxide [CO], ozone [O3], nitrogen oxide [NO], oxides of nitrogen [NO(x)], nitrogen dioxide [NO2], sulfur dioxide [SO2], methane [CH4], nonmethane hydrocarbon [NMHC]) have been conducted to study the effect of physicochemical factors on the PM10 concentration. In addition, this study includes source apportionment of PM10 in Kuala Lumpur urban environment. An advanced principal component analysis (PCA) technique coupled with absolute principal component scores (APCS) and multiple linear regression (MLR) has been applied. The average annual concentration of PM10 for 8 yr is 51.3 ± 25.8 µg m⁻³, which exceeds the Recommended Malaysian Air Quality Guideline (RMAQG) and international guideline values. Detail analysis shows the dependency of PM10 on the linear changes of the motor vehicles in use and the amount of biomass burning, particularly from Sumatra, Indonesia, during southwesterly monsoon. The main sources of PM10 identified by PCA-APCS-MLR are traffic combustion (28%), ozone coupled with meteorological factors (20%), and wind-blown particles (1%). However, the apportionment procedure left 28.0 µg m⁻³, that is, 51% of PM10 undetermined.