ABSTRACT
Optimizing the electrical communication between enzymes and electrodes is critical in the development of biosensors, enzymatic biofuel cells, and other bioelectrocatalytic applications. One approach to address this limitation is the attachment of redox mediators or relays to the enzymes. Here we report a simple genetic modification of a glucose oxidase enzyme to display a free thiol group near its active site. This facilitates the site-specific attachment of a maleimide-modified gold nanoparticle to the enzyme, which enables direct electrical communication between the conjugated enzyme and an electrode. Glucose oxidase is of particular interest in biofuel cell and biosensor applications, and the approach of "prewiring" enzyme conjugates in a site-specific manner will be valuable in the continued development of these systems.
Subject(s)
Aspergillus niger/enzymology , Biosensing Techniques/methods , Enzymes, Immobilized/genetics , Glucose Oxidase/genetics , Gold/chemistry , Nanoparticles/chemistry , Catalytic Domain , Enzymes, Immobilized/chemistry , Enzymes, Immobilized/metabolism , Glucose/analysis , Glucose/metabolism , Glucose Oxidase/chemistry , Glucose Oxidase/metabolism , Models, Molecular , Protein Engineering , Sulfhydryl Compounds/chemistryABSTRACT
In this work the shift in fluorescence emission spectra of acrylodan, a polar sensitive fluorophore, has been used to characterize the polarity immediately surrounding cytoplasmic (cMDH) and mitochondrial malate dehydrogenase (mMDH) enzyme immobilized within three-dimensional macroporous chitosan scaffolds. The scaffolds were fabricated from solutions of fluorescently tagged enzymes mixed with deacetylated and hydrophobically modified chitosan polymer. Each solution was frozen and then freeze-dried through the process of thermally induced phase separation (TIPS). The blue shift in acrylodan's emission maxima (lambda(max)) revealed a polar shift in the chemical microenvironment surrounding the enzymes when immobilized in a modified as opposed to unmodified chitosan scaffold. These results suggest that the method of hydrophobic modification of native chitosan polymer can be used to control the amphiphilic nature of the chemical microenvironment immediately surrounding the enzyme after it has been immobilized.
Subject(s)
Enzymes, Immobilized/chemistry , Spectrometry, Fluorescence/methods , 2-Naphthylamine/analogs & derivatives , 2-Naphthylamine/chemistry , Chitosan/chemistry , Electrochemical Techniques , Electrodes , Enzymes, Immobilized/metabolism , Fluorescent Dyes/chemistry , Malate Dehydrogenase/chemistry , Malate Dehydrogenase/metabolism , PorosityABSTRACT
Indirectly heated electrodes operating in a non-isothermal mode have been used as transducers for reagentless glucose biosensors. Pyrroloquinoline quinone-dependent soluble glucose dehydrogenase (PQQ-sGDH) was entrapped on the electrode surface within a redox hydrogel layer. Localized polymer film precipitation was invoked by electrochemically modulating the pH-value in the diffusion zone in front of the electrode. The resulting decrease in solubility of an anodic electrodeposition paint (EDP) functionalized with Osmium complexes leads to precipitation of the redox hydrogel concomitantly entrapping the enzyme. The resulting sensor architecture enables a fast electron transfer between enzyme and electrode surface. The glucose sensor was operated at pre-defined temperatures using a multiple current-pulse mode allowing reproducible indirect heating of the sensor. The sensor characteristics such as the apparent Michaelis constants K(M)(app) and maximum currents I(max)(app) were determined at different temperatures for the main substrate glucose as well as a potential interfering co-substrate maltose. The limit of detection increased with higher temperatures for both substrates (0.020 mM for glucose, and 0.023 mM for maltose at 48 degrees C). The substrate specificity of PQQ-sGDH is highly temperature dependent. Therefore, a mathematical model based on a multiple linear regression approach could be applied to discriminate between the current response for glucose and maltose. This allowed accurate determination of glucose in a concentration range of 0-0.1mM in the presence of unknown maltose concentrations ranging from 0 to 0.04 mM.
Subject(s)
Biosensing Techniques/instrumentation , Glucose 1-Dehydrogenase/chemistry , Glucose/analysis , PQQ Cofactor/chemistry , Biosensing Techniques/methods , Electrodes , Models, Theoretical , Sensitivity and Specificity , TemperatureABSTRACT
In this work we present a biological fuel cell fabricated by combining a Shewanella oneidensis microbial anode and a laccase-modified air-breathing cathode. This concept is devised as an extension to traditional biochemical methods by incorporating diverse biological catalysts with the aim of powering small devices. In preparing the biological fuel cell anode, novel hierarchical-structured architectures and biofilm configurations were investigated. A method for creating an artificial biofilm based on encapsulating microorganisms in a porous, thin film of silica was compared with S. oneidensis biofilms that were allowed to colonize naturally. Results indicate comparable current and power densities for artificial and natural biofilm formations, based on growth characteristics. As a result, this work describes methods for creating controllable and reproducible bio-anodes and demonstrates the versatility of hybrid biological fuel cells.
Subject(s)
Bioelectric Energy Sources/microbiology , Biofilms/growth & development , Shewanella/enzymology , Shewanella/growth & development , Biomass , Biotechnology/methods , Electrochemistry , Electrodes , Microscopy, Electron, Scanning Transmission , Shewanella/classification , Shewanella/ultrastructure , Silicon DioxideABSTRACT
This research introduces a method for fabrication of conductive electrode materials with hierarchical structure from porous polymer/carbon composite materials. We describe the fabrication of (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds doped with carbon materials that provide a conductive three-dimensional architecture that was demonstrated for application in microbial fuel cell (MFC) anodes. Composite electrodes from PHBV were fabricated to defined dimensions by solvent casting and particulate leaching of a size-specific porogen (in this case, sucrose). The cellular biocompatibility of the resulting composite material facilitated effective immobilization of a defined preparation of Shewanella oneidensis DSP-10 as a model microbial catalyst. Bacterial cells were immobilized via chemical vapor deposition (CVD) of silica to create an engineered biofilm that exhibits efficient bioelectrocatalysis of a simple-carbon fuel in a MFC. The functionalized PHBV electrodes demonstrate stable and reproducible anodic open circuit potentials of -320 ± 20 mV (vs Ag/AgCl) with lactate as the electron donor. Maximum power densities achieved by the hierarchically structured electrodes (~5 mW cm(3)) were significantly higher than previously observed for graphite-felt electrodes. The methodology for fabrication of scalable electrode materials may be amenable to other bioelectrochemical applications, such as enzyme fuel cells and biosensors, and could easily be adapted to various design concepts.
Subject(s)
Bioelectric Energy Sources/microbiology , Carbon/chemistry , Polymers/chemistry , Shewanella/chemistry , Electricity , Electrodes/microbiology , Graphite , Shewanella/metabolismABSTRACT
Chitosan (CHIT) scaffolds doped with multi-walled carbon nanotubes (CNT) were fabricated and evaluated for their utility as a microbial fuel cell (MFC) anodic material. High resolution microscopy verified the ability of Shewanella oneidensis MR-1 to directly colonize CHIT-CNT scaffolds. Cross-linking agents 1-ethyl-3-[3-dimethylaminopropyl] carbodimide hydrochloride (EDC), glutaraldehyde and glyoxal were independently studied for their ability to strengthen the CHIT-CNT matrix without disrupting the final pore structure. 2.5 vol% glyoxal was found to be the optimal cross-linker in terms of porosity (BET surface area=30.2 m(2) g(-1)) and structural stability. Glyoxyl and EDC cross-linked CHIT-CNT scaffolds were then studied for their ability to transfer electrons to underlying glassy carbon. Results showed an open circuit cell voltage of 600 mV and a maximum power density of 4.75 W/m(3) at a current density of 16 A/m(3) was achieved in non stirred batch mode, which compares well with published data using carbon felt electrodes where a power density of 3.5 W/m(3) at a current density of 7 A/m(3) have been reported. Additionally, CHIT-CNT scaffolds were impregnated into carbon felt electrodes and these results suggest that CHIT-CNT scaffolds can be successfully integrated with multiple support materials to create hybrid electrode materials. Further, preliminary tests indicate that the integrated scaffolds offer a robust macroporous electrode material that can be used in flow-through configurations.
Subject(s)
Bioelectric Energy Sources , Chitosan , Electrodes , Nanotubes, Carbon , Shewanella/physiology , Carbodiimides/pharmacology , Carbon/chemistry , Cross-Linking Reagents , Electrons , Equipment Design , Glutaral/pharmacology , Glyoxal/pharmacology , PorosityABSTRACT
One of the key goals of enzymatic biofuel cells research has been the development of a fully enzymatic biofuel cell that operates under a continuous flow-through regime. Here, we present our work on achieving this task. Two NAD(+)-dependent dehydrogenase enzymes; malate dehydrogenase (MDH) and alcohol dehydrogenase (ADH) were independently coupled with poly-methylene green (poly-MG) catalyst for biofuel cell anode fabrication. A fungal laccase that catalyzes oxygen reduction via direct electron transfer (DET) was used as an air-breathing cathode. This completes a fully enzymatic biofuel cell that operates in a flow-through mode of fuel supply polarized against an air-breathing bio-cathode. The combined, enzymatic, MDH-laccase biofuel cell operated with an open circuit voltage (OCV) of 0.584 V, whereas the ADH-laccase biofuel cell sustained an OCV of 0.618 V. Maximum volumetric power densities approaching 20 µW cm(-3) are reported, and characterization criteria that will aid in future optimization are discussed.
Subject(s)
Alcohol Dehydrogenase/chemistry , Bioelectric Energy Sources , Laccase/chemistry , Malate Dehydrogenase/chemistry , Electrodes , Electron Transport , Fungi/chemistry , Methylene Blue/analogs & derivativesABSTRACT
Engineered enzyme conjugate of the small laccase enzyme from Streptomyces coelicolor and zinc finger DNA binding domain from Zif268 is demonstrated to bind double stranded DNA in a site specific manner while retaining enzymatic activity.
Subject(s)
DNA/metabolism , Laccase/genetics , Laccase/metabolism , Protein Engineering/methods , Streptomyces coelicolor/enzymology , Base Sequence , DNA/genetics , Laccase/chemistry , Models, Molecular , Protein Structure, Tertiary , Substrate Specificity , Zinc FingersABSTRACT
Populations of metabolically active bacteria were associated at an electrode surface via vapor-deposition of silica to facilitate in situ characterization of bacterial physiology and bio-electrocatalytic activity in microbial fuel cells.
Subject(s)
Bioelectric Energy Sources/microbiology , Bioelectric Energy Sources/standards , Shewanella/growth & development , Silicon Dioxide/chemistry , Electricity , Electrodes , Electron Transport , Graphite/chemistry , Microscopy, Electron, Scanning , PorosityABSTRACT
Multiwalled carbon nanotubes (MWCNTs) were used as doping material for three-dimensional chitosan scaffolds to develop a highly conductive, porous, and biocompatible composite material. The porous and interconnected structures were formed by the process of thermally induced phase separation followed by freeze-drying applied to an aqueous solution of 1 wt % chitosan acetic acid. The porosity was characterized to be 97% by both mercury intrusion porosimetry measurements and SEM image analysis. When MWCNTs were used as a filler to introduce conductive pathways throughout the chitosan skeleton, the solubilizing hydrophobic and hydrophilic properties of chitosan established stable polymer/MWCNT solutions that yielded a homogeneous distribution of nanotubes throughout the final composite matrix. A percolation theory threshold of approximately 2.5 wt % MWCNTs was determined by measurement of the conductivity as a function of chitosan/MWCNT ratios. The powder resistivity of completely compressed scaffolds also was measured and was found to be similar for all MWCNT concentrations (0.7-0.15 Omega cm powder resistivity for MWCNTs of 0.8-5 wt %) and almost five times lower than the 20 k Omega cm value found for pure chitosan scaffolds.
Subject(s)
Chitosan/chemistry , Nanotubes, Carbon/chemistry , Nanotubes, Carbon/ultrastructure , Electric Conductivity , Microscopy, Electron, Scanning , PorosityABSTRACT
Heated electrodes were applied for the non-isothermal operation of amperometric glucose biosensors based on glucose oxidase immobilised on the electrode surface by entrapment within a polymer layer. The localised deposition of the polymer film under simultaneous entrapment of the enzyme was achieved by an electrochemically induced pH-modulation in the diffusion zone in front of the electrode, thus altering the solubility of the polymer chains. This non-manual sensor preparation protocol could be successfully used for the modification of a novel indirectly heated electrode. The non-isothermal operating mode allows working at the optimum temperature of the enzyme sensors without any thermal distortion of the bulk solution. Increased surface temperature of the sensor thus accelerates transport as well as kinetic processes, resulting in an enhanced amperometric signal. In the presence of interfering compounds such as ascorbic acid, the proposed technique allows use of the diverging thermal impact on the sensing process, for different electrochemically active compounds, for a deconvolution of the amperometric signal at different electrode temperatures. A calculation method for determination of glucose in the presence of one interfering compound is presented as a basis for a calculative interference elimination.