ABSTRACT
Exploiting novel strategies for simultaneously harvesting ubiquitous, renewable, and easily accessible solar energy based on the photothermal effect, and efficiently storing the acquired thermal energy plays a vital role in revolutionizing the current fossil fuel-dominating energy structure. Developing black phosphorene-based phase-change composites with optimized photothermal conversion efficiencyand high latent heat is the most promising way to achieve efficient solar energy harvesting and rapid thermal energy storage. However, exfoliating high-quality black phosphorene nanosheets remains challenging, Furthermore, an efficient strategy that can construct the aligned black phosphorene frameworks to maximize thermal conductivity enhancement is still lacking. Herein, high-quality black phosphorene nanosheets are prepared by an optimized exfoliating strategy. Meanwhile, by regulating the temperature gradient during freeze-casting, the framework consisting of shipshape aligned black phosphorene at long-range is successfully fabricated, improving the thermal conductivity of the poly(ethylene glycol) matrix up to 1.81 W m-1 K-1 at 20 vol% black phosphorene loading. The framework also endows the composite with excellent phase-change material encapsulation capacity and high latent heat of 103.91 J g-1 . It is envisioned that the work advances the paradigm of contrasting frameworks with nanosheets toward controllable structure thermal enhancement of the composites.
ABSTRACT
Soil organic matter can protect plants and microorganisms from toxic substances. Beyond the tolerance limit, the toxicity of petroleum pollution to soil organisms may increase rapidly with the increase of petroleum content. However, the method for evaluating the petroleum tolerance limit of soil organic matter (SOM) is still lacking. In this study, the petroleum saturation limit in SOM was first evaluated by the sorption coefficient (Kd) of 1,2-dichlorobenzene (DCB) from water to soils containing different petroleum levels. The sorption isotherm of dichlorobenzene in several petroleum-contaminated soils with different organic matter content and the microbial toxicity test of several petroleum-contaminated soils were determined. It is found that when the petroleum content is about 5% of the soil organic matter content, the sorption of petroleum to organic matter reached saturation limit. When organic matter reaches petroleum saturation limit, the sorption coefficient of DCB by soil particles increased linearly with the increase of petroleum content (R2 > 0.991). The results provided important insights into the understanding the fate of petroleum pollutants in soil and the analysis of soil toxicity.
Subject(s)
Environmental Pollutants , Petroleum , Environmental Pollution , SoilABSTRACT
Cancer incidence and mortality are rapidly increasing worldwide; therefore, effective therapies are required in the current scenario of increasing cancer cases. Polysaccharides are a family of natural polymers that hold unique physicochemical and biological properties, and they have become the focus of current antitumour drug research owing to their significant antitumour effects. In addition to the direct antitumour activity of some natural polysaccharides, their structures offer versatility in synthesizing multifunctional nanocomposites, which could be chemically modified to achieve high stability and bioavailability for delivering therapeutics into tumor tissues. This review aims to highlight recent advances in natural polysaccharides and polysaccharide-based nanomedicines for cancer therapy.
Subject(s)
Antineoplastic Agents , Neoplasms , Humans , Polysaccharides/pharmacology , Polysaccharides/therapeutic use , Polysaccharides/chemistry , Antineoplastic Agents/pharmacology , Antineoplastic Agents/therapeutic use , Neoplasms/drug therapy , NanomedicineABSTRACT
BACKGROUND: Thousands of medical staff have been infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), with hundreds of deaths reported. Such loss could be prevented if there were a serologic assay for SARS-CoV-2-specific antibodies for serological surveillance of its infection at the early stage of disease. METHODS: Using Chinese hamster ovarian (CHO) cell-expressed full-length SARS-CoV-2 S1 protein as capturing antigen, a coronavirus disease 2019 (COVID-19)/SARS-CoV-2 S1 serology enzyme-linked immunosorbent assay (ELISA) kit was developed and validated with negative samples collected prior to the outbreak or during the outbreak and positive samples from patients confirmed with COVID-19. RESULTS: The specificity of the ELISA kit was 97.5%, as examined against total 412 normal human samples. The sensitivity was 97.1% by testing against 69 samples from hospitalized and/or recovered COVID-19 patients. The overall accuracy rate reached 97.3%. The assay was able to detect SARS-CoV-2 antibody on day 1 after the onset of COVID-19 disease. The average antibody levels increased during hospitalization and 14 days after discharge. SARS-CoV-2 antibodies were detected in 28 of 276 asymptomatic medical staff and 1 of 5 nucleic acid test-negative "close contacts" of COVID-19 patients. CONCLUSIONS: With the assays developed here, we can screen medical staff, incoming patients, passengers, and people who are in close contact with the confirmed patients to identify the "innocent viral spreaders," protect the medical staff, and stop further spread of the virus.
Subject(s)
Antibodies, Viral/blood , COVID-19/blood , COVID-19/epidemiology , Animals , CHO Cells , COVID-19/virology , Cricetulus , Enzyme-Linked Immunosorbent Assay , SARS-CoV-2/immunology , SARS-CoV-2/pathogenicity , Serologic TestsABSTRACT
Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) is a powerful technique for the in situ study of the physiochemical properties of the electrochemical solid/liquid interface at the nanoscale and molecular level. To further broaden the potential window of EC-TERS while extending its application to opaque samples, here, we develop a top-illumination atomic force microscopy (AFM) based EC-TERStechnique by using a water-immersion objective of a high numerical aperture to introduce the excitation laser and collect the signal. This technique not only extends the application of EC-TERS but also has a high detection sensitivity and experimental efficiency. We coat a SiO2 protection layer over the AFM-TERS tip to improve both the mechanical and chemical stability of the tip in a liquid TERS experiment. We investigate the influence of liquid on the tip-sample distance to obtain the highest TERS enhancement. We further evaluate the reliability of the as-developed EC-AFM-TERS technique by studying the electrochemical redox reaction of polyaniline. The top-illumination EC-AFM-TERS is promising for broadening the application of EC-TERS to more practical systems, including energy storage and (photo)electrocatalysis.
ABSTRACT
Rabies is a fatal zoonosis which could affect all mammals. Glycoprotein (G protein) from the rabies virus plays an important role in the binding of virus to target cells. However, expression of the G protein with native conformation has been a great challenge for many years. In this study, we solved this problem by replacing the original signal peptide of rabies virus G protein with the one from the heavy chain of human IgG. The expression levels of recombinant G protein dramatically increased from a few µg/L to 50 mg/L in the culture supernatants. The identity of the recombinant G protein was confirmed by western blotting using both 6XHis mAb 6E2 and rabies G protein mAb 7G3. The correct conformation of the recombinant G protein was shown by using rabies virus neutralizing antibodies. In addition, the recombinant G protein had immune-reactivities with mice sera raised against rabies vaccines and vice versa. Taken together, our data suggested that by replacing the signal peptide, the expression level of the G protein with native conformation could be significantly improved. This would help the development of a rabies subunit vaccine, structural studies of rabies G protein, elucidation of the signal pathway of RABV infection.
Subject(s)
Antibodies, Neutralizing/biosynthesis , Antibodies, Viral/biosynthesis , Antigens, Viral/administration & dosage , Immunoglobulin Heavy Chains/genetics , Rabies virus/immunology , Rabies/prevention & control , Recombinant Fusion Proteins/genetics , Viral Envelope Proteins/administration & dosage , Animals , Antigens, Viral/genetics , Antigens, Viral/immunology , Cloning, Molecular , Cross Protection , Escherichia coli/genetics , Escherichia coli/metabolism , Gene Expression , Genetic Vectors/chemistry , Genetic Vectors/metabolism , Humans , Immune Sera/chemistry , Immunoglobulin G/genetics , Immunoglobulin G/metabolism , Immunoglobulin Heavy Chains/metabolism , Mice , Protein Engineering/methods , Protein Sorting Signals/genetics , Rabies/virology , Rabies Vaccines/administration & dosage , Rabies Vaccines/biosynthesis , Rabies Vaccines/genetics , Rabies virus/genetics , Recombinant Fusion Proteins/administration & dosage , Recombinant Fusion Proteins/biosynthesis , Viral Envelope Proteins/genetics , Viral Envelope Proteins/immunologyABSTRACT
Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) appears as a promising in situ nanospectroscopic tool for characterization and understanding of the electrochemical interfacial processes at the nanometer scale and molecular level. However, the wide application of EC-TERS is hampered by its low sensitivity as a result of the optical path distortion due to the refractive index mismatch of the multilayer media (air, glass, and electrolyte). Here, we propose a new side-illumination EC-TERS setup by coupling a water immersion objective with a high numerical aperture to a scanning tunneling microscope scanning head customized with a large open space and a compact spectroelectrochemical cell. It not only effectively eliminates the optical distortion but also increases the sensitivity remarkably, which allows sensitive monitoring of the electrochemical redox processes of anthraquinone molecules. More importantly, EC-TERS is able to independently control the tip position and laser illumination position. By utilizing this feature, we reveal that the irreversible reduction reaction of anthraquinone observed in EC-TERS is induced by the synergistic effect of the negative potential and laser illumination rather than the localized surface plasmon. The highly improved sensitivity and the flexibility to control the tip and laser illumination position on the nanometer scale endows EC-TERS as an important tool for the fundamental understanding of the photo- or plasmon electrochemistry and the interfacial structure-activity relationship of important electrochemical systems.
ABSTRACT
In recent years, many studies have focused on the changes of partial or single African ecosystems and the drivers of those changes. However, focusing only on partial or single ecosystems has limited the understanding of the relationships between the vegetation and climate changes in all of the African ecosystems. In this study, the temporal trends of the satellite-derived annual mean leaf area index (GLASS-LAI) were analyzed, and the inter-annual relationships were developed between the annual mean LAI and the climate variables (precipitation and temperature) for the time period ranging from 1982 to 2013. Additionally, this study applied seasonal curves and step-wise multiple regression methods to investigate the relationships between intra-annual LAI and climate changes. It was found that the GLASS-LAI over half of Africa had shown general significant greening or browning trends during the period from 1982 to 2013. From the results of inter-annual analysis, with mean annual precipitation lower than 600 mm, the greening of the savannas and grasslands in the Sahel was found to highly correspond with the increased precipitation. In contrast, the evergreen broadleaf forests in the Gulf of Guinea and Congo Basin showed strongly positive responses to the annual temperature when the mean annual temperature was below 25 °C. In regard to the intra-annual responses, the precipitation with 1-month lags was found to be helpful for the vegetation growth, with the exception of the evergreen broadleaf. The results of this research study indicated that the different land-covers in Africa had displayed clear differences in their annual trends during the examined 32-year period and had responded differently to the inter- and intra-annual climate drivers. This difference was evident by the characteristics of the vegetation covers and the geographic distributions. Therefore, further examinations of these differences can potentially improve the understanding of the land surface-atmosphere interactions among the different African ecosystems.
Subject(s)
Climate Change , Ecosystem , Africa , Plant Leaves , TemperatureABSTRACT
Surface and interfaces play key roles in heterogeneous catalysis, electrochemistry and photo(electro)chemistry. Tip-enhanced Raman spectroscopy (TERS) combines plasmon-enhanced Raman spectroscopy with scanning probe microscopy to simultaneously provide a chemical fingerprint and morphological information for the sample at the nanometer spatial resolution. It is an ideal tool for achieving an in-depth understanding of the surface and interfacial processes, so that the relationship between structure and chemical performance can be established. We begin with the background of surfaces and interfaces and TERS, followed by a detailed discussion on some issues in experimental TERS, including tip preparation and TERS instrument configuration. We then focus on the progress of TERS for studying the surfaces and interfaces under different conditions, from ambient, to UHV, solid-liquid and electrochemical environments, followed by a brief introduction to the current understanding of the unprecedented high spatial resolution and surface selection rules. We conclude by discussing the future challenges for TERS practical applications in surfaces and interfaces.
ABSTRACT
Cancer cells usually utilize glucose as a carbon source for aerobic glycolysis, a phenomenon known as the Warburg effect. Increasing studies have shown that PVT1 (a long non-coding RNA, lncRNA) functions as critical regulator of multiple cancers. However, it remains totally unknown whether and how PVT1 regulates glucose metabolism in OS cells. In this study, we found that the expression of PVT1 were specifically increased in OS cells and tissues, and the upregulated PVT1 indicated poor prognosis. Glucose uptake, lactate production, and the expression of HK2 in OS cells were increased by overexpression of PVT1, while decreased by PVT1 knockdown. We further fund that PVT1 acted as molecular sponge to repress miR-497. Inhibition of miR-497 promoted glucose consumption and lactate production, phenomenon could be reversed by PVT1 silencing. Moreover, HK2 was a direct target of miR-497 and overexpression of HK2 attenuated the suppressive effect of miR-497 on glycolysis. Functionally, knockdown of PVT1 exerted tumor-suppressive effect by suppressing cell proliferation, cell cycle progression, and invasion in vitro, whereas miR-497 inhibitor partially abolished the inhibition effect of si-PVT1. Overexpression of HK2 attenuated the miR-497 induced inhibition of cell growth and motility. Taken together, these findings suggested that PVT1 contributes to OS cell glucose metabolism, cell proliferation, and motility through the miR-497/HK2 pathway, and revealed a novel relation between lncRNA and the alteration of glycolysis in OS cells.
Subject(s)
Disease Progression , Glycolysis , Hexokinase/metabolism , MicroRNAs/metabolism , Osteosarcoma/metabolism , RNA, Long Noncoding/metabolism , Cell Line, Tumor , Hexokinase/genetics , Humans , MicroRNAs/antagonists & inhibitors , Osteosarcoma/enzymology , Osteosarcoma/geneticsABSTRACT
Interfacial properties are highly important to the performance of some energy-related systems. The in-depth understanding of the interface requires highly sensitive in situ techniques that can provide fingerprint molecular information at nanometer resolution. We developed an electrochemical tip-enhanced Raman spectroscopy (EC-TERS) by introduction of the light horizontally to the EC-STM cell to minimize the optical distortion and to keep the TERS measurement under a well-controlled condition. We obtained potential-dependent EC-TERS from the adsorbed aromatic molecule on a Au(111) surface and observed a substantial change in the molecule configuration with potential as a result of the protonation and deprotonation of the molecule. Such a change was not observable in EC-SERS (surface-enhanced), indicating EC-TERS can more faithfully reflect the fine interfacial structure than EC-SERS. This work will open a new era for using EC-TERS as an important nanospectroscopy tool for the molecular level and nanoscale analysis of some important electrochemical systems including solar cells, lithium ion batteries, fuel cells, and corrosion.
ABSTRACT
After over 15 years of development, tip-enhanced Raman spectroscopy (TERS) is now facing a very important stage in its history. TERS offers high detection sensitivity down to single molecules and a high spatial resolution down to sub-nanometers, which make it an unprecedented nanoscale analytical technique offering molecular fingerprint information. The tip is the core element in TERS, as it is the only source through which to support the enhancement effect and provide the high spatial resolution. However, TERS suffers and will continue to suffer from the limited availability of TERS tips with a high enhancement, good stability, and high reproducibility. This review focuses on the tip-related issues in TERS. We first discuss the parameters that influence the enhancement and spatial resolution of TERS and the possibility to optimize the performance of a TERS system via an in-depth understanding of the enhancement mechanism. We then analyze the methods that have been developed for producing TERS tips, including vacuum-based deposition, electrochemical etching, electrodeposition, electroless deposition, and microfabrication, with discussion on the advantages and weaknesses of some important methods. We also tackle the issue of lifetime and protection protocols of TERS tips which are very important for the stability of a tip. Last, some fundamental problems and challenges are proposed, which should be addressed before this promising nanoscale characterization tool can exert its full potential. Graphical Abstract á .
Subject(s)
Microscopy, Atomic Force/instrumentation , Spectrum Analysis, Raman/instrumentation , Surface Plasmon Resonance/instrumentation , Animals , Equipment Design , Humans , Microtechnology , Nanoparticles/chemistry , Nanotechnology/instrumentationABSTRACT
Improving electrochemical activity of graphene is crucial for its various applications, which requires delicate control over its geometric and electronic structures. We demonstrate that precise control of the density of vacancy defects, introduced by Ar(+) irradiation, can improve and finely tune the heterogeneous electron transfer (HET) rate of graphene. For reliable comparisons, we made patterns with different defect densities on a same single layer graphene sheet, which allows us to correlate defect density (via Raman spectroscopy) with HET rate (via scanning electrochemical microscopy) of graphene quantitatively, under exactly the same experimental conditions. By balancing the defect induced increase of density of states (DOS) and decrease of conductivity, the optimal HET rate is attained at a moderate defect density, which is in a critical state; that is, the whole graphene sheet becomes electronically activated and, meanwhile, maintains structural integrity. The improved electrochemical activity can be understood by a high DOS near the Fermi level of defective graphene, as revealed by ab initio simulation, which enlarges the overlap between the electronic states of graphene and the redox couple. The results are valuable to promote the performance of graphene-based electrochemical devices. Furthermore, our findings may serve as a guide to tailor the structure and properties of graphene and other ultrathin two-dimensional materials through defect density engineering.
ABSTRACT
The hybrid yellow catfish exhibits advantages over pure yellow catfish in terms of fast growth, fast development, a high feeding rate, and strong immunity; additionally, it is almost sterile, thus ensuring the conservation of the genetic stock of fish populations. To investigate the sterility mechanism in hybrid yellow catfish (P. fulvidraco (â) × P. vachelli (â)), the mRNA and miRNA of the gonads of P. fulvidraco, P. vachelli, and a hybrid yellow catfish were analyzed to characterize the differentially expressed genes; this was carried out to help establish gene expression datasets to assist in the further determination of the mechanisms of genetic sterility in hybrid yellow catfish. In total, 1709 DEGs were identified between the hybrid and two pure yellow catfishes. A KEGG pathway analysis indicated that several genes related to reproductive functions were upregulated, including those involved in the cell cycle, progesterone-mediated oocyte maturation, and oocyte meiosis, and genes associated with ECM-receptor interaction were downregulated. The spermatogenesis-related GO genes CFAP70, RSPH6A, and TSGA10 were identified as being downregulated DEGs in the hybrid yellow catfish. Sixty-three DEmiRNAs were identified between the hybrid and the two pure yellow catfish species. The upregulated DEmiRNAs ipu-miR-194a and ipu-miR-499 were found to target the spermatogenesis-related genes CFAP70 and RSPH6A, respectively, playing a negative regulatory role, which may underscore the miRNA-mRNA regulatory mechanism of sterility in hybrid yellow catfish. The differential expression of ipu-miR-196d, ipu-miR-125b, and ipu-miR-150 and their target genes spidr, cep85, and kcnn4, implicated in reproductive processes, was verified via qRT-PCR, consistent with the transcriptome sequencing expression trends. This study provides deep insights into the mechanism of hybrid sterility in vertebrate groups, thereby contributing to achieving a better understanding and management of fish conservation related to hybrid sterility.
ABSTRACT
Exploring the effects of seasonal variation on the gut microbiota of cold-water fish plays an important role in understanding the relationship between seasonal variation and cold-water fish. Gut samples of cold-water fish and environmental samples were collected during summer and winter from the lower reaches of the Yalong River. The results of the 16S rRNA sequencing showed that significant differences were identified in the composition and diversity of gut bacteria of cold-water fish. Co-occurrence network complexity of the gut bacteria of cold-water fish was higher in summer compared to winter (Sum: nodes: 256; edges: 20,450; Win: nodes: 580; edges: 16,725). Furthermore, from summer to winter, the contribution of sediment bacteria (Sum: 5.3%; Win: 23.7%) decreased in the gut bacteria of cold-water fish, while the contribution of water bacteria (Sum: 0%; Win: 27.7%) increased. The normalized stochastic ratio (NST) and infer community assembly mechanisms by phylogenetic bin-based null model analysis (iCAMP) showed that deterministic processes played a more important role than stochastic processes in the microbial assembly mechanism of gut bacteria of cold-water fish. From summer to winter, the contribution of deterministic processes to gut bacteria community assembly mechanisms decreased, while the contribution of stochastic processes increased. Overall, these results demonstrated that seasonal variation influenced the gut bacteria of cold-water fish and served as a potential reference for future research to understand the adaptation of fish to varying environments.
ABSTRACT
The challenges associated with heat dissipation in high-power electronic devices used in communication, new energy, and aerospace equipment have spurred an urgent need for high-performance thermal interface materials (TIMs) to establish efficient heat transfer pathways from the heater (chip) to heat sinks. Recently, emerging 2D materials, such as graphene and boron nitride, renowned for their ultrahigh basal-plane thermal conductivity and the capacity to facilitate cross-scale, multi-morphic structural design, have found widespread use as thermal fillers in the production of high-performance TIMs. To deepen the understanding of 2D material-based TIMs, this review focuses primarily on graphene and boron nitride-based TIMs, exploring their structures, properties, and applications. Building on this foundation, the developmental history of these TIMs is emphasized and a detailed analysis of critical challenges and potential solutions is provided. Additionally, the preparation and application of some other novel 2D materials-based TIMs are briefly introduced, aiming to offer constructive guidance for the future development of high-performance TIMs.
ABSTRACT
The developed porous structure and high density are essential to enhance the bulk performance of carbon-based supercapacitors. Nevertheless, it remains a significant challenge to optimize the balance between the porous structure and the density of carbon materials to realize superior gravimetric and areal electrochemical performance. The soluble starch-derived interconnected hierarchical porous carbon microspheres were prepared through a simple hydrothermal treatment succeeded by chemical activation with a low dosage of KOH. Due to the formation of interconnected spherical morphology, hierarchical porous structure, reasonable mesopore volume (0.33 cm3 g-1) and specific surface area (1162 m2 g-1), the prepared carbon microsphere has an ultrahigh capacitance of 394 F g-1 @ 1 A g-1 and a high capacitance retention of 62.7 % @ 80 A g-1. The assembled two-electrode device displays good cycle stability after 20,000 cycles and an ultra-high energy density of 11.6 Wh kg-1 @ 250 W kg-1. Moreover, the sample still exhibits a specific capacitance of 165 F g-1 @ 1 A g-1 at a high mass loading of 10 mg cm-2, resulting in a high areal capacitance of 1.65 F cm-2. The strategy proposed in this study, via a low-dose KOH activation process, provides the way for the synthesis of high-performance porous carbon materials.
Subject(s)
Carbon , Starch , Carbon/chemistry , Microspheres , Porosity , Electric CapacitanceABSTRACT
Circadian clock perturbation frequently occurs in cancer and facilitates tumor progression by regulating malignant growth and shaping the immune microenvironment. Emerging evidence has indicated that clock genes are disrupted in melanoma and linked to immune escape. Herein, we found that the expression of retinoic acid receptor-related orphan receptor-α (RORA) is downregulated in melanoma patients and that patients with higher RORA expression have a better prognosis after immunotherapy. Additionally, RORA was significantly positively correlated with T-cell infiltration and recruitment. Overexpression or activation of RORA stimulated cytotoxic T-cell-mediated antitumor responses. RORA bound to the CD274 promoter and formed an inhibitory complex with HDAC3 to suppress PD-L1 expression. In contrast, the DEAD-box helicase family member DDX3X competed with HDAC3 for binding to RORA, and DDX3X overexpression promoted RORA release from the suppressive complex and thereby increased PD-L1 expression to generate an inhibitory immune environment. The combination of a RORA agonist with an anti-CTLA4 antibody synergistically increased T-cell antitumor immunity in vivo. A score based on the combined expression of HDAC3, DDX3X, and RORA correlated with immunotherapy response in melanoma patients. Together, this study elucidates a mechanism of clock component-regulated antitumor immunity, which will help inform the use of immunotherapy and lead to improved outcomes for melanoma patients receiving combined therapeutic treatments. Significance: RORA forms a corepressor complex to inhibit PD-L1 expression and activate antitumor T-cell responses, indicating that RORA is a potential target and predictive biomarker to improve immunotherapy response in melanoma patients.
Subject(s)
B7-H1 Antigen , Circadian Clocks , Melanoma , Humans , Melanoma/immunology , Melanoma/pathology , Melanoma/genetics , Melanoma/metabolism , B7-H1 Antigen/metabolism , B7-H1 Antigen/genetics , B7-H1 Antigen/immunology , Animals , Mice , Circadian Clocks/genetics , Circadian Clocks/immunology , Nuclear Receptor Subfamily 1, Group F, Member 1/metabolism , Nuclear Receptor Subfamily 1, Group F, Member 1/genetics , Tumor Microenvironment/immunology , Histone Deacetylases/metabolism , Histone Deacetylases/genetics , Monitoring, Immunologic , Gene Expression Regulation, Neoplastic , Cell Line, Tumor , Mice, Inbred C57BL , Male , Female , DEAD-box RNA Helicases/genetics , DEAD-box RNA Helicases/metabolism , Immunotherapy/methods , PrognosisABSTRACT
In the pursuit of effective thermal management for electronic devices, it is crucial to develop insulation thermal interface materials (TIMs) that exhibit exceptional through-plane thermal conductivity, low thermal resistance, and minimal compression modulus. Boron nitride (BN), given its outstanding thermal conduction and insulation properties, has garnered significant attention as a potential material for this purpose. However, previously reported BN-based composites have consistently demonstrated through-plane thermal conductivity below 10 W m-1 K-1 and high compression modulus, whilst also presenting challenges in terms of mass production. In this study, low molecular weight polydimethylsiloxane (PDMS) and large-size BN were utilized as the foundational materials. Utilizing a rolling-curing integrated apparatus, we successfully accomplished the continuous preparation of large-sized, high-adhesion BN films. Subsequent implementation of stacking, cold pressing, and vertical cutting techniques enabled the attainment of a remarkable BN-based TIM, characterized by an unprecedented through-plane thermal conductivity of up to 12.11 W m-1 K-1, remarkably low compression modulus (55 kPa), and total effective thermal resistance (0.16 °C in2 W-1, 50 Psi). During the TIMs performance evaluation, our TIMs demonstrated superior heat dissipation capabilities compared with commercial TIMs. At a heating power density of 40 W cm-2, the steady-state temperature of the ceramic heating element was found to be 7 °C lower than that of the commercial TIMs. This pioneering feat not only contributes valuable technical insights for the development of high-performance insulating TIMs but also establishes a solid foundation for widespread implementation in thermal management applications across a range of electronic devices.
ABSTRACT
The implementation of passive cooling strategies is crucial for transitioning from the current high-power- and energy-intensive thermal management practices to more environmentally friendly and carbon-neutral alternatives. Among the various approaches, developing thermal management materials with high thermal conductivity and emissivity for effective cooling of personal and wearable devices in both indoor and outdoor settings poses significant challenges. In this study, we successfully fabricated a cooling patch by combining biodegradable silk fibroin with boron nitride nanosheets. This patch exhibits consistent heat dissipation capabilities under different ambient conditions. Leveraging its excellent radiative cooling efficiency (Rsolar = 0.89 and εLWIR = 0.84) and high thermal conductivity (in-plane 27.58 W m-1 K-1 and out-plane 1.77 W m-1 K-1), the cooling patch achieves significant simulated skin temperature reductions of approximately 2.5 and 8.2 °C in outdoor and indoor conditions, respectively. Furthermore, the film demonstrates excellent biosafety and can be recycled and reused for at least three months. This innovative BNNS/SF film holds great potential for advancing the field of personal thermal management materials.