ABSTRACT
Silver has long been recognized for its potent antimicrobial properties, but achieving a slow and longer-term delivery of silver ions presents significant challenges. Previous efforts to control silver ion dosages have struggled to sustain release for extended periods in biomimetic environments, especially in the presence of complex proteins. This challenge is underscored by the absence of technology for sustaining antimicrobial activity, especially in the context of orthopedic implants where long-term efficacy, extending beyond 7 days, is essential. In this study, the tunable, slow, and longer-term release of silver ions from the two-dimensional (2D) nanocapillaries of graphene oxide (GO) laminates incorporated with silver ions (Ag-GO) for antimicrobial applications are successfully demonstrated. To closely mimic a physiologically relevant serum-based environment, a novel in vitro study model using 100% fetal bovine serum (FBS) is introduced as the test medium for microbiology, biocompatibility, and bioactivity studies. To emulate fluid circulation in a physiological environment, the in vitro studies are challenged with serum exchange protocols on different days. The findings show that the Ag-GO coating can sustainably release silver ions at a minimum dosage of 10 µg cm-2 day-1, providing an effective and sustained antimicrobial barrier for over ten days.
ABSTRACT
PURPOSE: To characterize the serum metabolism in patients with Helicobacter pylori-positive and H. pylori-negative gastritis. METHODS: Clinical data and serum gastric function parameters, PGI (pepsinogen I), PGII, PGR (PGI/II), and G-17 (gastrin-17) of 117 patients with chronic gastritis were collected, including 57 H. pylori positive and 60 H. pylori negative subjects. Twenty cases in each group were randomly selected to collect intestinal mucosa specimens and serum samples. The gut microbiota profiles were generated by 16S rRNA gene sequencing, and the serum metabolites were analyzed by a targeted metabolomics approach based on liquid chromatography-mass spectrometry (LC-MS) technology. RESULTS: Altered expression of 20 metabolites, including isovaleric acid, was detected in patients with HPAG. Some taxa of Bacteroides, Fusobacterium, and Prevotella in the gut microbiota showed significant correlations with differentially expressed metabolites between H. pylori positive and H. pylori negative individuals. As a result, an H. pylori-gut microbiota-metabolism (HGM) axis was proposed. CONCLUSION: Helicobacter pylori infection may influence the progression of mucosal diseases and the emergence of other complications in the host by altering the gut microbiota, and thus affecting the host serum metabolism.
Subject(s)
Gastritis , Gastrointestinal Microbiome , Helicobacter Infections , Helicobacter pylori , Humans , Helicobacter Infections/microbiology , RNA, Ribosomal, 16S/genetics , Gastritis/microbiology , Gastric Mucosa/microbiology , InflammationABSTRACT
Bubali cornu (water buffalo horn) has been used as the substitute for Cornu rhinoceri asiatici (rhino horn) in clinical applications, and is the essential ingredient of Angong Niuhuang Wan. In recent years, there are a number of adulterants on the commercial herbal medicine markets. An efficient tool is required for species identification. In this study, 155 Bubali cornu samples have been taken from original animals and collected from commercial herbal medicine markets. 153 COI sequences have been successfully obtained from 155 samples through DNA extraction, PCR amplification, bidirectional sequencing and assembly. 93 COI sequences have been added to the DNA barcoding database of traditional Chinese animal medicine after validation using DNA barcoding GAP and tree-based methods. The species identification of the 62 commercial Bubali cornu medicines has been accomplished on the DNA barcoding system for identifying herbal medicine using the updated animal medicine database (www.tcmbarcode.cn). Except two samples failed to obtain COI sequences, 54.8% of the commercial Bubali cornu medicines were water buffalo horns and 29% were yak horns. Our results showed that yak horn was the major adulterant of Bubali cornu and the DNA barcoding method may accurately discriminate Bubali cornu and their adulterants. Therefore, we recommend that supervision on the herbal medicine markets should be strengthened with this new method to warren the effectiveness of herbal medicines.
Subject(s)
Biological Products/chemistry , Drugs, Chinese Herbal/chemistry , Horns/chemistry , Animals , Buffaloes , DNA Barcoding, Taxonomic , Medicine, Chinese TraditionalABSTRACT
Electrospun fibres have emerged as vital components in developing tissue engineering scaffolds. Calcium phosphate-based materials, renowned for their bioactivity and biocompatibility, have garnered considerable attention in biomedical applications. This study focuses on the incorporation of amorphous calcium phosphate (ACP) nanoparticles into poly(L-lactic acid) (PLLA) to produce electrospun PLLA/ACP fibrous membranes. Subsequent treatment with acetone yielded a hierarchical porous structure, boasting an ultra-high surface area of 94.7753 ± 0.3884 m2/g. The ACP nanoparticles, initially encapsulated by PLLA, were exposed on the fibre surface after acetone treatment. Furthermore, the porous PLLA/ACP fibrous membrane exhibited superior mechanical properties (Young's modulus = 0.148 GPa, tensile strength = 3.05 MPa) and enhanced wettability. In a 7-day in vitro cell culture with human osteoblast-like cells, the porous PLLA/ACP fibrous membrane demonstrated a significant improvement in osteoblast adhesion and proliferation, with a proliferation rate increase of 252.0% and 298.7% at day 4 and day 7, respectively. These findings underscore the potential of the porous PLLA/ACP fibrous membrane as a promising candidate for bone tissue scaffolds.
Subject(s)
Acetone , Tissue Scaffolds , Humans , Porosity , Calcium PhosphatesABSTRACT
Unpaired image-to-image translation (I2IT) involves establishing an effective mapping between the source and target domains to enable cross-domain image transformation. Previous contrastive learning methods inadequately accounted for the variations in features between two domains and the interrelatedness of elements within the features. Consequently, this can result in challenges encompassing model instability and the blurring of image edge features. To this end, we propose a multi-attention bidirectional contrastive learning method for unpaired I2IT, referred to as MabCUT. We design separate embedding blocks for each domain based on depthwise separable convolutions and train them simultaneously from both the source and target domains. Then we utilize a pixel-level multi-attention extractor to query images from embedding blocks in order to select feature blocks with crucial information, thus preserving essential features from the source domain. To enhance the feature representation capability of the model, we incorporate depthwise separable convolutions for the generator. We conducted comprehensive evaluations using three datasets, demonstrating that our approach enhances the quality of unpaired I2IT while avoiding the issue of mode collapse-related image blurring.
ABSTRACT
Poly(glycerol monomethacrylate) (PGMA) prepared by reversible addition-fragmentation chain transfer polymerization was investigated as an additive for high-loading iron oxide nanoparticle (IOP) 3D printable inks. The effect of adjusting the molar mass and loading of PGMA on the rheology of IOP suspensions was investigated, and an optimized ink formulation containing 70% w/w IOPs and 0.25% w/w PGMA98 at pH 10 was developed. This ink was successfully 3D printed onto various substrates and into several structures, including rectangles, high aspect ratio cylinders, letters, spiral- and comb-shaped structures, and thin- and thick-walled toroids. The effect of sintering on the mechanical properties of printed artifacts was investigated via four-point flexural and compressive testing, with higher sintering temperatures resulting in improved mechanical properties due to changes in the particle size and microstructure. The printed toroids were fabricated into inductors, and their electrical performance was assessed via impedance spectroscopy at a working frequency range of 0.001-13 MHz. There was a clear trade-off between electrical properties and sintering temperature due to a phase change between γ-Fe2O3 and α-Fe2O3 upon heating. Nevertheless, the optimized devices had a Q factor of â¼40 at 10 MHz, representing a superior performance compared to that of other inductors with iron oxide cores previously reported. Thus, this report represents a significant step toward the development of low-cost, fully aqueous, high loading, and 3D printable ceramic inks for high-performance inductors and functional devices.
ABSTRACT
Large bone defects, often resulting from trauma and disease, present significant clinical challenges. Electrospun fibrous scaffolds closely resembling the morphology and structure of natural ECM are highly interested in bone tissue engineering. However, the traditional electrospun fibrous scaffold has some limitations, including lacking interconnected macropores and behaving as a 2D scaffold. To address these challenges, a sponge-like electrospun poly(L-lactic acid) (PLLA)/polycaprolactone (PCL) fibrous scaffold has been developed by an innovative and convenient method (i.e., electrospinning, homogenization, progen leaching and shaping). The resulting scaffold exhibited a highly porous structure (overall porosity = 85.9 %) with interconnected, regular macropores, mimicking the natural extracellular matrix. Moreover, the incorporation of bioactive glass (BG) particles improved the hydrophilicity (water contact angle = 79.7°) and biocompatibility and promoted osteoblast cell growth. In-vitro 10-day experiment revealed that the scaffolds led to high cell viability. The increment of the proliferation rates was 195.4 % at day 7 and 281.6 % at day 10. More importantly, Saos-2 cells could grow, proliferate, and infiltrate into the scaffold. Therefore, this 3D PLLA/PCL with BG sponge holds great promise for bone defect repair in tissue engineering applications.
Subject(s)
Bone and Bones , Polyesters , Tissue Engineering , Tissue Scaffolds , Tissue Scaffolds/chemistry , Polyesters/chemistry , Porosity , Humans , Tissue Engineering/methods , Bone and Bones/drug effects , Osteoblasts/drug effects , Osteoblasts/cytology , Cell Proliferation/drug effects , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Cell Survival/drug effectsABSTRACT
2-Dimensional materials (2DMs) offer an attractive solution for the realization of high density and reliable memristors, compatible with printed and flexible electronics. In this work we fabricate a fully inkjet printed MoS2-based resistive switching memory, where graphene is used as top electrode and silver is used as bottom electrode. Memristic effects are observed only after annealing of each printed component. The printed memory on silicon shows low SET/RESET voltage, short switching times (less than 0.1 s) and resistance switching ratios of 103-105, comparable or superior to the performance obtained in devices with both printed silver electrodes on rigid substrates. The same device on Kapton shows resistance switching ratios of 102-103 and remains stable at least up to 2% of strain. The memristor resistance switching is attributed to the formation of Ag conductive filaments, which can be suppressed by integrating graphene grown by chemical vapour deposition (CVD) onto the silver electrode. Temperature-dependent electrical measurements starting from 200 K show that memristic behavior appears at a temperature of â¼300 K, confirming that an energy threshold is needed to form the conductive filament. This work shows that inkjet printing is a very powerful technique for the fabrication of 2DMs-based resistive switches onto rigid and flexible substrates.
ABSTRACT
Bone tissue engineering has become one of the most promising therapeutic methods to treat bone defects. A suitable scaffolding material to regenerate new bone tissues should have a high specific surface area, high porosity and a suitable surface structure which benefit cell attachment, proliferation, and differentiation. In this study, an acetone post-treatment strategy was developed to generate heterogeneous structure. After PLLA/PCL nanofibrous membranes were electrospun and collected, they were treated with acetone to generate a highly porous structure. Meanwhile, part of PCL was extracted from the fibre and enriched on the fibre surface. The cell affinity of the nanofibrous membrane was verified by human osteoblast-like cells assay. The proliferation rate of heterogeneous samples increased 190.4 %, 265.5 % and 137.9 % at day 10 compared with pristine samples. These results demonstrated that the heterogeneous PLLA/PCL nanofibrous membranes could enhance osteoblast adhesion and proliferation. With high surface area (average surface area 36.302 m2/g) and good mechanical properties (average Young's modulus 1.65 GPa and average tensile strength 5.1 MPa), the heterogeneous PLLA/PCL membrane should have potential applications in the field of bone regeneration.
Subject(s)
Nanofibers , Tissue Scaffolds , Humans , Tissue Scaffolds/chemistry , Porosity , Acetone , Polyesters/chemistry , Tissue Engineering/methods , Bone and Bones , Bone Regeneration , Cell Proliferation , Nanofibers/chemistryABSTRACT
This paper reports a facile route to prepare bulk zeolites with tunable phase compositions and microstructures by combining hydrothermal treatment and geopolymer precursor technique. Amorphous Na-based geopolymer (NaGP) is transformed into crystalline analcime following hydrothermal treatments. By systematically investigating the effects of hydrothermal conditions on the phase compositions and microstructures of the products, the optimal hydrothermal procedure is screened as treating NaGP in 1 M NaOH solution at 160 °C for 6 h. Furthermore, we achieve control over phase compositions of the resulting bulk zeolites by tailoring the initial Na/K ratio of geopolymer precursors. For instance, treating the geopolymer precursor with a Na/K ratio of 9: 1 under the optimal hydrothermal procedure leads to the formation of zeolite consisting of analcime and zeolite-P. The as-prepared adsorbents exhibit outstanding adsorption performance for the hazardous elements, among which analcime-zeolite-P shows an adsorption efficiency of 93.3% for Cs+, and NaGP exhibits an adsorption efficiency of 99.6% for Sr2+. Moreover, we reveal the mechanisms underlying the adsorption of Cs+ and Sr2+ in the adsorbents to be chemisorption. Meanwhile, ion exchanges also occur in NaGP and analcime-zeolite-P during Cs+ adsorption. These results render geopolymers and their derived bulk zeolites promising for hazardous elements adsorption.
ABSTRACT
The kinetics and uniformity of ion insertion reactions at the solid-liquid interface govern the rate capability and lifetime, respectively, of electrochemical devices such as Li-ion batteries. Using an operando x-ray microscopy platform that maps the dynamics of the Li composition and insertion rate in Li(x)FePO4, we found that nanoscale spatial variations in rate and in composition control the lithiation pathway at the subparticle length scale. Specifically, spatial variations in the insertion rate constant lead to the formation of nonuniform domains, and the composition dependence of the rate constant amplifies nonuniformities during delithiation but suppresses them during lithiation, and moreover stabilizes the solid solution during lithiation. This coupling of lithium composition and surface reaction rates controls the kinetics and uniformity during electrochemical ion insertion.