Advancing the Utility of DNA Origami Technique through Enhanced Stability of DNA-Origami-Based Assemblies.

Since its discovery in 2006, the DNA origami technique has revolutionized bottom-up nanofabrication. This technique is simple yet versatile and enables the fabrication of nanostructures of almost arbitrary shapes. Furthermore, due to their intrinsic addressability, DNA origami structures can serve as templates for the arrangement of various nanoscale components (small molecules, proteins, nanoparticles, etc.) with controlled stoichiometry and nanometer-scale precision, which is often beyond the reach of other nanofabrication techniques. Despite the multiple benefits of the DNA origami technique, its applicability is often restricted by the limited stability in application-specific conditions. This Review provides an overview of the strategies that have been developed to improve the stability of DNA-origami-based assemblies for potential biomedical, nanofabrication, and other applications.

Measuring the Affinities of RNA and DNA Aptamers with DNA Origami-Based Chiral Plasmonic Probes.

Reliable characterization of binding affinities is crucial for selected aptamers. However, the limited repertoire of universal approaches to obtain the dissociation constant (KD) values often hinders the further development of aptamer-based applications. Herein, we present a competitive hybridization-based strategy to characterize aptamers using DNA origami-based chiral plasmonic assemblies as optical reporters. We incorporated aptamers and partial complementary strands blocking different regions of the aptamers into the reporters and measured the kinetic behaviors of the target binding to gain insights on aptamers' functional domains. We introduced a reference analyte and developed a thermodynamic model to obtain a relative dissociation constant of an aptamer-target pair. With this approach, we characterized RNA and DNA aptamers binding to small molecules with low and high affinities.

Characterizing Aptamers with Reconfigurable Chiral Plasmonic Assemblies.

Aptamers have emerged as versatile affinity ligands and as promising alternatives to protein antibodies. However, the inconsistency in the reported affinities and specificities of aptamers has greatly hindered the development of aptamer-based applications. Herein, we present a strategy to characterize aptamers by using DNA origami-based chiral plasmonic assemblies as reporters and establishing a competitive hybridization reaction-based thermodynamic model. We demonstrate the characterization of several DNA aptamers, including aptamers for small molecules and macromolecules, as well as aptamers with high and low affinities. The presented characterization scheme can be readily adapted to a wide selection of aptamers. We anticipate that our approach will advance the development of aptamer-based applications by enabling reliable and reproducible characterization of aptamers.

Surface Coordination of Black Phosphorus with Modified Cisplatin.

Black phosphorus (BP) is a two-dimensional (2D) nanomaterial with high charge-carrier mobility, a tunable direct bandgap, and a unique in-plane anisotropic structure; however, the easiness of BP oxidation into P xO y species in ambient conditions largely limits its applications. In this study, modified cisplatin-Pt-NO3 [Pt(NH3)2(NO3)2] is used for surface coordination with BP nanosheets to generate Pt@BP, which maintains the surface morphology and properties of BP nanosheets for more than 24 h in ambient conditions. In addition, Pt@BP interacts with DNA both in vitro and in cell. Pt@BP shows a good cellular uptake rate and significantly increases the drug sensitivity of cisplatin-resistant cancer cell lines (A2780 and HepG2) compared with unmodified cisplatin. Our study is the first attempt to stabilize bare BP with cationic cisplatin species, and the generated Pt@BP could be used for potential synergistic photothermal/chemotherapy of cisplatin-resistant cancer.

Recent Advances in Surface Plasmon Resonance Imaging Sensors.

The surface plasmon resonance (SPR) sensor is an important tool widely used for studying binding kinetics between biomolecular species. The SPR approach offers unique advantages in light of its real-time and label-free sensing capabilities. Until now, nearly all established SPR instrumentation schemes are based on single- or several-channel configurations. With the emergence of drug screening and investigation of biomolecular interactions on a massive scale these days for finding more effective treatments of diseases, there is a growing demand for the development of high-throughput 2-D SPR sensor arrays based on imaging. The so-called SPR imaging (SPRi) approach has been explored intensively in recent years. This review aims to provide an up-to-date and concise summary of recent advances in SPRi. The specific focuses are on practical instrumentation designs and their respective biosensing applications in relation to molecular sensing, healthcare testing, and environmental screening.

Development of peptide-based chemiluminescence enzyme immunoassay (CLEIA) for diagnosis of dengue virus infection in human.

Dengue is the most prevalent mosquito-borne viral disease in tropical and subtropical regions worldwide. Since its clinical symptoms are non-specific and easily mistaken as other kinds of infection, laboratory diagnosis is required to confirm dengue infections. In this study, ten peptides (E1-E10) from the envelope protein of dengue virus (DENV) were first identified using bioinformatic tool. The screened peptides were then synthesized for the peptide-based chemiluminescence enzyme immunoassay (CLEIA). Two peptides, E1 and E7, were found as the best candidate antigen and therefore used as downstream application in the development of low-cost peptide-based anti-DENV immunoglobulin M antibodies (IgM) indirect CLEIA. 176 serum samples were used to study the presence of anti-DENV IgM antibodies to evaluate the diagnostic ability of IgM-CLEIA. Receiver operating characteristic curve (ROC) was used to estimate the diagnostic cut-off value. The sensitivity and the specificity reached 82.5% and 94.6% respectively when peptide E1 was used, but declined to 79.2% and 92.9% respectively when peptide E7 was used. Therefore, the combination of E1 and E7 was used to improve the sensitivity and the specificity to 85.0% and 96.4% respectively in 1.5 h assay time, providing a potentially practical use for the diagnosis of DENV infections in patients' serum.

Prevalence and genetic diversity analysis of human coronaviruses among cross-border children.

BACKGROUND: More than a decade after the outbreak of human coronaviruses (HCoVs) SARS in Guangdong province and Hong Kong SAR of China in 2002, there is still no reoccurrence, but the evolution and recombination of the coronaviruses in this region are still unknown. Therefore, surveillance on the prevalence and the virus variation of HCoVs circulation in this region is conducted. METHODS: A total of 3298 nasopharyngeal swabs samples were collected from cross-border children (<6 years, crossing border between Southern China and Hong Kong SAR) showing symptoms of respiratory tract infection, such as fever (body temperature > 37.5 °C), from 2014 May to 2015 Dec. Viral nucleic acids were analyzed and sequenced to study the prevalence and genetic diversity of the four human coronaviruses. The statistical significance of the data was evaluated with Fisher chi-square test. RESULTS: 78 (2.37%; 95%CI 1.8-2.8%) out of 3298 nasopharyngeal swabs specimens were found to be positive for OC43 (36;1.09%), HKU1 (34; 1.03%), NL63 (6; 0.18%) and 229E (2;0.01%). None of SARS or MERS was detected. The HCoVs predominant circulating season was in transition of winter to spring, especially January and February and NL63 detected only in summer and fall. Complex population with an abundant genetic diversity of coronaviruses was circulating and they shared homology with the published strains (99-100%). Besides, phylogenetic evolutionary analysis indicated that OC43 coronaviruses were clustered into three clades (B,D,E), HKU1 clustered into two clades(A,B) and NL63 clustered into two clades(A,B). Moreover, several novel mutations including nucleotides substitution and the insertion of spike of the glycoprotein on the viral surface were discovered. CONCLUSIONS: The detection rate and epidemic trend of coronaviruses were stable and no obvious fluctuations were found. The detected coronaviruses shared a conserved gene sequences in S and RdRp. However, mutants of the epidemic strains were detected, suggesting continuous monitoring of the human coronaviruses is in need among cross-border children, who are more likely to get infected and transmit the viruses across the border easily, in addition to the general public.

An Aptamer Bio-barCode (ABC) assay using SPR, RNase H, and probes with RNA and gold-nanorods for anti-cancer drug screening.

With modifications to an ultra-sensitive bio-barcode (BBC) assay, we have developed a next generation aptamer-based bio-barcode (ABC) assay to detect cytochrome-c (Cyto-c), a cell death marker released from cancer cells, for anti-cancer drug screening. An aptamer is a short single-stranded DNA selected from a synthetic DNA library that is capable of binding to its target with high affinity and specificity based on its unique DNA sequence and 3D structure after folding. Similar to the BBC assay, Cyto-c is captured by a micro-magnetic particle (MMP) coated with capturing antibodies (Ab) and an aptamer specifically against Cyto-c to form sandwich structures ([MMP-Ab]-[Cyto-c]-[Aptamer]). After washing and melting, our aptamers, acting as a DNA bio-barcode, are released from the sandwiches and hybridized with the probes specially designed for RNase H for surface plasmon resonance (SPR) sensing. In an aptamer-probe duplex, RNase H digests the RNA in the probe and releases the intact aptamer for another round of hybridization and digestion. With signal enhancement effects from gold-nanorods (Au-NRs) on probes for SPR sensing, the detection limit was found to be 1 nM for the aptamer and 80 pM for Cyto-c. Without the time-consuming DNA amplification steps by PCR, the detection process of this new ABC assay can be completed within three hours. As a proof-of-concept, phenylarsine oxide was found to be a potent agent to kill liver cancer cells with multi-drug resistance at the nano-molar level. This approach thus provides a fast, sensitive and robust tool for anti-cancer drug screening.

Identification of microRNAs in Throat Swab as the Biomarkers for Diagnosis of Influenza.

BACKGROUND: Influenza is a serious worldwide disease that captures global attention in the past few years after outbreaks. The recent discoveries of microRNA (miRNA) and its unique expression profile in influenza patients have offered a new method for early influenza diagnosis. The aim of this study was to examine the utility of miRNAs for the diagnosis of influenza. METHODS: Thirteen selected miRNAs were investigated with the hosts' throat swabs (25 H1N1, 20 H3N2, 20 influenza B and 21 healthy controls) by real-time quantitative polymerase chain reaction (RT-qPCR) using U6 snRNA as endogenous control for normalization, and receiver operating characteristic (ROC) curve/Area under curve (AUC) for analysis. RESULTS: miR-29a-3p, miR-30c-5p, miR-34c-3p and miR-181a-5p are useful biomarkers for influenza A detection; and miR-30c-5p, miR-34b-5p, miR-205-5p and miR-449b-5p for influenza B detection. Also, use of both miR-30c-5p and miR-34c-3p (AUC=0.879); and miR-30c-5p and miR-449b-5p (AUC=0.901) are better than using one miRNA to confirm influenza A and influenza B infection, respectively. CONCLUSIONS: Given its simplicity, non-invasiveness and specificity, we found that the throat swab-derived miRNAs miR-29a-3p, miR-30c-5p, miR-34b-5p, miR-34c-3p, miR-181a-5p, miR-205-5p and miR-449b-5p are a useful tool for influenza diagnosis on influenza A and B.

A non-PCR SPR platform using RNase H to detect MicroRNA 29a-3p from throat swabs of human subjects with influenza A virus H1N1 infection.

As in all RNA viruses, influenza viruses change and mutate constantly because their RNA polymerase has no proofreading ability. This poses a serious threat to public health nowadays. In addition, traditional pathogen-based detection methods may not be able to report an infection from an unknown type or a subtype of virus if its nucleotide sequence is not known. Because of these factors, targeting host microRNA signatures may be an alternative to classify infections and distinguish types of pathogens as microRNAs are produced in humans shortly after infection. Although this approach is in its infant stage, there is an urgent need to develop a rapid reporter assay for microRNA for disease control and prevention. As a proof of concept, we report herein for the first time a non-PCR MARS (MicroRNA-RNase-SPR) assay to detect the microRNA miR-29a-3p from human subjects infected with influenza virus H1N1 by surface plasmon resonance (SPR). In our MARS assay, RNase H is employed to specifically hydrolyze the RNA probes immobilized on the gold surface where they hybridize with its cognate target cDNAs miR-29a-3p, where it was formed from reverse transcription with mature miR-29a-3p specific stem-looped primers. After the digestion of the RNA probe by RNase H, the intact cDNA was released from the RNA-DNA hybrid and bound to a new RNA probe for another enzymatic reaction cycle to amplify signals. With assay optimization, the detection limit of our MARS assay for miR-29a-3p was found to be 1 nM, and this new assay could be completed within 1 hour without thermal cycling. This non-PCR assay with high selectivity for mature microRNA provides a new platform for rapid disease diagnosis, quarantine and disease control.

Monitoring bacterial growth using tunable resistive pulse sensing with a pore-based technique.

A novel bacterial growth monitoring method using a tunable resistive pulse sensor (TRPS) system is introduced in this study for accurate and sensitive measurement of cell size and cell concentration simultaneously. Two model bacterial strains, Bacillus subtilis str.168 (BSU168) and Escherichia coli str.DH5α (DH5α), were chosen for benchmarking the growth-monitoring performance of the system. Results showed that the technique of TRPS is sensitive and accurate relative to widely used methods, with a lower detection limit of cell concentration measurement of 5 × 105 cells/ml; at the same time, the mean coefficient of variation from TRPS was within 2 %. The growth of BSU168 and DH5α in liquid cultures was studied by TRPS, optical density (OD), and colony plating. Compared to OD measurement, TRPS-measured concentration correlates better with colony plating (R = 0.85 vs. R = 0.72), which is often regarded as the gold standard of cell concentration determination. General agreement was also observed by comparing TRPS-derived cell volume measurements and those determined from microscopy. We have demonstrated that TRPS is a reliable method for bacterial growth monitoring, where the study of both cell volume and cell concentration are needed to provide further details about the physical aspects of cell dynamics in real time.

Multidrug resistance protein 1 (ABCC1) confers resistance to arsenic compounds in human myeloid leukemic HL-60 cells.

Arsenic trioxide (As(2)O(3)) is established as one of the most effective drugs for treatment of patients with acute promyelocytic leukemia, as well as other types of malignant tumors. However, HL-60 cells are resistant to As(2)O(3), and little is known about the underlying resistance mechanism for As(2)O(3) and its biomethylation products, namely, monomethylarsonous acid (MMA(III)) on the treatment of tumors. In the present study, we investigated the molecular mechanisms underlying iAs(III) and its intermediate metabolite MMA(III)-induced anticancer effects in the HL-60 cells. Here, we show that the HL-60 cells exhibit resistance to inorganic iAs(III) (IC(50) = 10 µM), but are relatively sensitive to its intermediate MMA(III) (IC(50) = 3.5 µM). Moreover, we found that the multidrug resistance protein 1 (MRP1), but not MRP2, is expressed in HL-60 cells, which reduced the intracellular arsenic accumulation, and conferred resistance to inorganic iAs(III) and MMA(III). Pretreatment of HL-60 with MK571, an inhibitor of MRP1, significantly increased iAs(III) and MMA(III)-induced cytotoxicity and arsenic accumulations, suggesting that the expression of MRP1/4 may lead to HL-60 cells resistance to trivalent arsenic compounds.

Aptamer-based bio-barcode assay for the detection of cytochrome-c released from apoptotic cells.

The recently developed bio-barcode (BBC) assay using polymerase chain reaction (PCR) to generate signals has been shown to be an extraordinarily sensitive method to detect protein targets. The BBC assay involves a magnetic microparticle (with antibody to capture the target of interest) and gold nanoparticle (with recognition antibody and thiolated single-stranded barcode DNAs) to form a sandwich around the target. The concentration of target is determined by the amount of barcode DNA released from the nanoparticles. Here we describe a modification using aptamers to substitute the gold nanoparticles for the BBC assay. In this study, we isolated a 76-mer monoclonal aptamer against cytochrome-c (cyto-c) and this single-stranded DNA in defined 3D structure for cyto-c was used in the BBC assay for both recognition and readout reporting. After magnetic separation, the aptamer was amplified by PCR and this aptamer-based barcode (ABC) assay was sensitive enough to detect the cyto-c in culture medium released from the apoptotic cells after drug treatment at the picomolar level. When compared to the conventional cyto-c detection by Western blot analysis, our ABC assay is sensitive, and time for the detection and quantification with ready-made probes was only 3 h.

Automated multiplex nucleic acid tests for rapid detection of SARS-CoV-2, influenza A and B infection with direct reverse-transcription quantitative PCR (dirRT-qPCR) assay in a centrifugal microfluidic platform.

The coronavirus disease 2019 (COVID-19) pandemic, caused by the new severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, has posed a threat to public health worldwide. Also, influenza virus has caused a large number of deaths annually. Since co-infection of SARS-CoV-2 and influenza virus, which share similar symptoms, hampers current treatment efficiency, multiple simultaneous detection of these viruses is needed to provide the right treatment for patients. We developed a microfluidic disc-direct RT-qPCR (dirRT-qPCR) assay for rapid multiplex detection of SARS-CoV-2, influenza A and B viral infection in pharyngeal swab samples in an automated manner. Choices of the DNA polymerase, concentrations of dTPs and MgCl2 were characterized to optimize the assay. A detection limit of 2 × 101 copies per reaction was found in all three viral RNAs with as little as 2 µL of swab samples. The accuracy of our assay was evaluated with 2127 clinical swab samples of infection with these three viruses and healthy controls, and it possessed a consistency rate of 100, 99.54 and 99.25% in SARS-CoV-2, influenza A and B detection in comparison to standard RT-qPCR. The reported scheme of our assay is capable of screening other viral infections for up to 16 targets simultaneously. The whole diagnosis could be completed in 1.5 hours after simple sample loading by a non-technical expert. This constitutes an enabling strategy for large-scale point-of-care screening of multiple viral infections, which ultimately lead to a pathway for resolving the critical issue of early diagnosis for the prevention and control of viral outbreaks.

Antibody-free rapid diagnosis of malaria in whole blood with surface-enhanced Raman Spectroscopy using Nanostructured Gold Substrate.

PURPOSE: The aim of this study is to establish a rapid antibody-free diagnostic method of malaria infection with Plasmodium falciparum and Plasmodium vivax in whole blood with Surface-enhanced Raman Spectroscopy using Nanostructured Gold Substrate. MATERIALS AND METHODS: The blood samples collected from patients were first lysed and centrifuged before dropping on the gold nano-structure (AuNS) substrate. Malaria diagnosis was performed by detecting Raman peaks from Surface Enhanced Raman Spectroscopy (SERS) with a 532 nm laser excitation. RESULTS: Raman peaks at 1370 cm-1, 1570 cm-1, and 1627 cm-1, known to have high specificity against interference from other mosquito-borne diseases such as Dengue and West Nile virus infection, were selected as the fingerprint markers associated with P. falciparum and P. vivax infection. The limit of detection was 10-5 dilution, corresponding to the concentration of parasitized blood cells of 100/mL. A total number of 25 clinical samples, including 5 from patients with P. falciparum infection, 10 with P. vivax infection and 10 from healthy volunteers, were evaluated to support its clinical practical use. The whole assay on malaria detection took 30 min to complete. CONCLUSIONS: While the samples analyzed in this work have strong clinical relevance, we have clearly demonstrated that sensitive malaria detection using AuNS-SERS is a practical direction for rapid in-field diagnosis of malaria infection.

Target trapping and in situ single-cell genetic marker detection with a focused optical beam.

Optical trapping of single particles or cells with the capability of in situ bio-sensing or genetic profiling opens the possibility of rapid screening of biological specimens. However, common optical tweezers suffer from the lack of long-range forces. Consequently, their application areas are predominantly limited to target manipulation instead of biological diagnostics. To solve this problem, we herein report an all-in-one approach by combining optical forces and convective drag forces generated through localized optothermal effect for long-range target manipulation. The device consists of a 2D array of gold coated polydimethylsiloxane (PDMS) micro-wells, which are immersed by colloidal particles or cell solution. Upon excitation of a 785-nm laser, the hydrodynamic convective force and optical forces will drag the targets of interest into their designated micro-wells. Moreover, the plasmonic thermal dissipation provides a constant temperature environment for following cell analysis procedures of cell isolation, lysis and isothermal nucleic acid amplification for the detection of genetic markers. With the merits of fabrication simplicity, short sample-to-answer cycle time and the compatibility with optical microscopes, the reported technique offers an attractive and highly versatile approach for on-site single cell analysis systems.

Integrated Printed Microfluidic Biosensors.

Integrated printed microfluidic biosensors are one of the most recent point-of-care (POC) sensor developments. Fast turnaround time for production and ease of customization, enabled by the integration of recognition elements and transducers, are key for on-site biosensing for both healthcare and industry and for speeding up translation to real-life applications. Here, we provide an overview of recent progress in printed microfluidics, from the 2D to the 4D level, accompanied by novel sensing element integration. We also explore the latest trends in integrated printed microfluidics for healthcare, especially POC diagnostics, and food safety applications.

Technological Advances in Multiscale Analysis of Single Cells in Biomedicine.

Single-cell analysis has recently received significant attention in biomedicine. With the advances in super-resolution microscopy, fluorescence labeling, and nanoscale biosensing, new information may be obtained for the design of cancer diagnosis and therapeutic interventions. The discovery of cellular heterogeneity further stresses the importance of single-cell analysis to improve our understanding of disease mechanism and to develop new strategies for disease treatment. To this end, many studies are exploited at the single-cell level for high throughput, highly parallel, and quantitative analysis. Technically, microfluidics are also designed to facilitate single-cell isolation and enrichment for downstream detection and manipulation in a robust, sensitive, and automated manner. Further achievements are made possible by consolidating optically label-free, electrical, and molecular sensing techniques. Moreover, these technologies are coupled with computing algorithms for high throughput and automated quantitative analysis with a short turnaround time. To reflect on how the technological developments have advanced single-cell analysis, this mini-review is aimed to offer readers an introduction to single-cell analysis with a brief historical development and the recent progresses that have enabled multiscale analysis of single-cells in the last decade. The challenges and future trends are also discussed with the view to inspire forthcoming technical developments.

A rapid sample-to-answer analytical detection of genetically modified papaya using loop-mediated isothermal amplification assay on lab-on-a-disc for field use.

With genetically modified (GM) food circulating on the market, a rapid transgenic food screening method is needed to protect consumer rights. The on-site screening efficiency of GM food testing is low. We report rapid sample-to-answer detection of GM papayas with loop-mediated isothermal amplification (LAMP) and a compact, portable, integrated microfluidic platform using microfluidic lab-on-a-disc (LOAD). GM samples were differentiated from non-GM papaya, based on the detection of a specific GM (P-35S (Cauliflower mosaic virus 35S promoter)) and non-GM DNA marker (papain) in 15 min. The detection limits for DNA and juice from papaya were 10 pg/µL and 0.02 µL, respectively. Our LOAD platform is a simple and robust solution for GM screening, which is anticipated to be a foundation for on-site testing of transgenic food.

Development of a direct reverse-transcription quantitative PCR (dirRT-qPCR) assay for clinical Zika diagnosis.

OBJECTIVE: The nucleic acid-based polymerase chain reaction (PCR) assay is commonly applied to detect infection with Zika virus (ZIKV). However, the time- and labor-intensive sample pretreatment required to remove inhibitors that cause false-negative results in clinical samples is impractical for use in resource-limited areas. The aim was to develop a direct reverse-transcription quantitative PCR (dirRT-qPCR) assay for ZIKV diagnosis directly from clinical samples. METHODS: The combination of inhibitor-tolerant polymerases, polymerase enhancers, and dirRT-qPCR conditions was optimized for various clinical samples including blood and serum. Sensitivity was evaluated with standard DNA spiked in simulated samples. Specificity was evaluated using clinical specimens of other infections such as dengue virus and chikungunya virus. RESULTS: High specificity and sensitivity were achieved, and the limit of detection (LOD) of the assay was 9.5×101 ZIKV RNA copies/reaction. The on-site clinical diagnosis of ZIKV required a 5µl sample and the diagnosis could be completed within 2h. CONCLUSIONS: This robust dirRT-qPCR assay shows a high potential for point-of-care diagnosis, and the primer-probe combinations can also be extended for other viral detection. It realizes the goal of large-scale on-site screening for viral infections and could be used for early diagnosis and the prevention and control of viral outbreaks.