Physics-based virtual environment for training core skills in vascular interventional radiological procedures.

Recent years have seen a significant increase in the use of Interventional Radiology (IR) as an alternative to open surgery. A large number of IR procedures commences with needle puncture of a vessel to insert guidewires and catheters: these clinical skills are acquired by all radiologists during training on patients, associated with some discomfort and occasionally, complications. While some visual skills can be acquired using models such as the ones used in surgery, these have limitations for IR which relies heavily on a sense of touch. Both patients and trainees would benefit from a virtual environment (VE) conveying touch sensation to realistically mimic procedures. The authors are developing a high fidelity VE providing a validated alternative to the traditional apprenticeship model used for teaching the core skills. The current version of the CRaIVE simulator combines home made software, haptic devices and commercial equipments.

Intra-operative quantification of the surgical gesture in orbital surgery: application to the proptosis reduction.

BACKGROUND: Proptosis is characterized by a protrusion of the eyeball due to an increase of the orbital tissue volume. To recover a normal eyeball positioning, the most frequent surgical technique consists in the osteotomy of orbital walls combined with a loading on the eyeball to initiate tissue decompression. The first biomechanical models dealing with proptosis reduction, validated in one patient, have been previously proposed by the authors. METHODS: This paper proposed an experimental method to quantify the intra-operative clinical gesture in proptosis reduction, and the pilot study concerned one clinical case. The eyeball's backward displacement was measured by an optical 3D localizer and the load applied by the surgeon was simultaneously measured by a custom-made force gauge. Quasi-static stiffness of the intra-orbital content was evaluated. FINDINGS: The average values for the whole experiment was 16 N (SD: 3N) for the force exerted by the surgeon and 9 mm (SD: 4mm) for the eyeball backward displacement. The averaged quasi-static stiffness of the orbital content was evaluated to 2.4N/mm (SD: 1.2) and showed a global decrease of 45% post-operatively. INTERPRETATION: The protocol and the associated custom-designed devices allowed loads, induced displacements and macroscopic stiffness of the orbital content to be measured intra-operatively. The clinical relevance has been demonstrated in a pilot study. To our knowledge, no study has been published allowing the clinical gesture in proptosis reduction to be quantified intra-operatively. Associating an enlarged database and validated patient-related predictive models will reinforce the surgical efficiency and patient comfort contributing to diagnosis and intra-operative guidance.

Clinical workflow for personalized foot pressure ulcer prevention.

Foot pressure ulcers are a common complication of diabetes because of patient's lack of sensitivity due to neuropathy. Deep pressure ulcers appear internally when pressures applied on the foot create high internal strains nearby bony structures. Monitoring tissue strains in persons with diabetes is therefore important for an efficient prevention. We propose to use personalized biomechanical foot models to assess strains within the foot and to determine the risk of ulcer formation. Our workflow generates a foot model adapted to a patient's morphology by deforming an atlas model to conform it to the contours of segmented medical images of the patient's foot. Our biomechanical model is composed of rigid bodies for the bones, joined by ligaments and muscles, and a finite element mesh representing the soft tissues. Using our registration algorithm to conform three datasets, three new patient models were created. After applying a pressure load below these foot models, the Von Mises equivalent strains and "cluster volumes" (i.e. volumes of contiguous elements with strains above a given threshold) were measured within eight functionally meaningful foot regions. The results show the variability of both location and strain values among the three considered patients. This study also confirms that the anatomy of the foot has an influence on the risk of pressure ulcer.

Non-linear elastic properties of the lingual and facial tissues assessed by indentation technique. Application to the biomechanics of speech production.

This paper aims at characterizing the mechanical behavior of two human anatomical structures, namely the tongue and the cheek. For this, an indentation experiment was provided, by measuring the mechanical response of tongue and cheek tissues removed from the fresh cadaver of a 74 year old woman. Non-linear relationships were observed between the force applied to the tissues and the corresponding displacements. To infer the mechanical constitutive laws from these measurements, a finite element (FE) analysis was provided. This analysis aimed at simulating the indentation experiment. An optimization process was used to determine the FE constitutive laws that provided the non-linear force/displacements observed during the indentation experiments. The tongue constitutive law was used for simulations provided by a 3D FE biomechanical model of the human tongue. This dynamical model was designed to study speech production. Given a set of tongue muscular commands, which levels correspond to the force classically measured during speech production, the FE model successfully simulated the main tongue movements observed during speech data.

Influence of the calcaneus shape on the risk of posterior heel ulcer using 3D patient-specific biomechanical modeling.

Most posterior heel ulcers are the consequence of inactivity and prolonged time lying down on the back. They appear when pressures applied on the heel create high internal strains and the soft tissues are compressed by the calcaneus. It is therefore important to monitor those strains to prevent heel pressure ulcers. Using a biomechanical lower leg model, we propose to estimate the influence of the patient-specific calcaneus shape on the strains within the foot and to determine if the risk of pressure ulceration is related to the variability of this shape. The biomechanical model is discretized using a 3D Finite Element mesh representing the soft tissues, separated into four domains implementing Neo Hookean materials with different elasticities: skin, fat, Achilles' tendon, and muscles. Bones are modelled as rigid bodies attached to the tissues. Simulations show that the shape of the calcaneus has an influence on the formation of pressure ulcers with a mean variation of the maximum strain over 6.0 percentage points over 18 distinct morphologies. Furthermore, the models confirm the influence of the cushion on which the leg is resting: a softer cushion leading to lower strains, it has less chances of creating a pressure ulcer. The methodology used for patient-specific strain estimation could be used for the prevention of heel ulcer when coupled with a pressure sensor.

Linear elastic properties of the facial soft tissues using an aspiration device: towards patient specific characterization.

Biomechanical modeling of the facial soft tissue behavior is needed in aesthetic or maxillo-facial surgeries where the simulation of the bone displacements cannot accurately predict the visible outcome on the patient's face. Because these tissues have different nature and elastic properties across the face, depending on their thickness, and their content in fat or muscle, individualizing their mechanical parameters could increase the simulation accuracy. Using a specifically designed aspiration device, the facial soft tissues deformation is measured at four different locations (cheek, cheekbone, forehead, and lower lip) on 16 young subjects. The stiffness is estimated from the deformations generated by a set of negative pressures using an inverse analysis based on a Neo Hookean model. The initial Young's modulus of the cheek, cheekbone, forehead, and lower lip are respectively estimated to be 31.0 kPa±4.6, 34.9 kPa±6.6, 17.3 kPa±4.1, and 33.7 kPa±7.3. Significant intra-subject differences in tissue stiffness are highlighted by these estimations. They also show important inter-subject variability for some locations even when mean stiffness values show no statistical difference. This study stresses the importance of using a measurement device capable of evaluating the patient specific tissue stiffness during an intervention.

ImaGiNe Seldinger: first simulator for Seldinger technique and angiography training.

In vascular interventional radiology, procedures generally start with the Seldinger technique to access the vasculature, using a needle through which a guidewire is inserted, followed by navigation of catheters within the vessels. Visual and tactile skills are learnt in a patient apprenticeship which is expensive and risky for patients. We propose a training alternative through a new virtual simulator supporting the Seldinger technique: ImaGiNe (imaging guided interventional needle) Seldinger. It is composed of two workstations: (1) a simulated pulse is palpated, in an immersive environment, to guide needle puncture and (2) two haptic devices provide a novel interface where a needle can direct a guidewire and catheter within the vessel lumen, using virtual fluoroscopy. Different complexities are provided by 28 real patient datasets. The feel of the simulation is enhanced by replicating, with the haptics, real force and flexibility measurements. A preliminary validation study has demonstrated training effectiveness for skills transfer.