ABSTRACT
The Jing-Mi Diversion Canal is a large-scale water diversion project in Beijing. Routine monitoring is crucial for the reliability and stability of urban water supply. Compared with traditional monitoring methods, interferometric synthetic aperture radar (InSAR) has the advantages of large scale and high accuracy. Based on the small baseline subset InSAR, 187 ascending and 102 descending SAR images obtained from Sentinel-1 were used to detect the deformation along the diversion canal from 2017 to 2023. The results show that there was a sinking trend along the diversion canal. The subsidence was serious in the first half of the canal, and continued to sink from 2019 to 2020. The subsidence was alleviated in 2023. Combined with leveling measurements, the InSAR deformation monitoring results of important pumping station buildings were verified. The measurement accuracy of InSAR can reach the millimeter level. We extracted the groundwater level time series and subsidence for risky canal segments. Through pixel-by-pixel comparison, it was found that fluctuations in groundwater level would have some impact on surface deformation. Severe local subsidence or uplift deformation occasionally occurred. To ensure the safety of water diversion, the monitoring and maintenance of relevant pump station buildings in risky areas should be increased in the future.
ABSTRACT
Characterized by light weight and high strength, composites are widely used as protective materials in dynamic impact loading under extreme conditions, such as high strain rates. Therefore, based on the excellent tensile properties of continuous fiber and the good flexibility and toughness of the bionic spiral structure, this study uses a multi-material 3D printer to incorporate continuous fiber, and then modifies the G-CODE file to control the printing path to achieve the production of a continuous fiber-reinforced Polylactic Acid composite helicoidal (spiral angle 60°) structure (COF-HP). Dynamic behavior under high-strain-rate impact experiments have been conducted using the Split Hopkinson Pressure Bar (SHPB). Stress-strain curves, impact energy curves and high-speed camera photographs with different strain rates at 680 s-1 and 890 s-1 have been analyzed to explore the dynamic process and illustrate the damage evolution. In addition, some detailed simulation models considering the incorporation of continuous optical fiber (COF) and different strain rates have been established and verified for deeper investigations. The results show that the COF does enhance the impact resistance of the laminates. When the porosity is reduced, the maximum stress of the continuous fiber-reinforced composite material is 4~7% higher than that of the pure PLA material. Our findings here expand the application of COF and provide a new method for designing protective materials, which have broad application prospects in the aerospace and automotive industries.