Explore or exploit? A model-based screening strategy for PETase secretion by Corynebacterium glutamicum.

Extracellular production of target proteins simplifies downstream processing due to obsolete cell disruption. However, optimal combinations of a heterologous protein, suitable signal peptide, and secretion host can currently not be predicted, resulting in large strain libraries that need to be tested. On the experimental side, this challenge can be tackled by miniaturization, parallelization, and automation, which provide high-throughput screening data. These data need to be condensed into a candidate ranking for decision-making to focus bioprocess development on the most promising candidates. We screened for Bacillus subtilis signal peptides mediating Sec secretion of two polyethylene terephthalate degrading enzymes (PETases), leaf-branch compost cutinase (LCC) and polyester hydrolase mutants, by Corynebacterium glutamicum. We developed a fully automated screening process and constructed an accompanying Bayesian statistical modeling framework, which we applied in screenings for highest activity in 4-nitrophenyl palmitate degradation. In contrast to classical evaluation methods, batch effects and biological errors are taken into account and their uncertainty is quantified. Within only two rounds of screening, the most suitable signal peptide was identified for each PETase. Results from LCC secretion in microliter-scale cultivation were shown to be scalable to laboratory-scale bioreactors. This work demonstrates an experiment-modeling loop that can accelerate early-stage screening in a way that experimental capacities are focused to the most promising strain candidates. Combined with high-throughput cloning, this paves the way for using large strain libraries of several hundreds of strains in a Design-Build-Test-Learn approach.

Parallelized microscale fed-batch cultivation in online-monitored microtiter plates: implications of media composition and feed strategies for process design and performance.

Limited throughput represents a substantial drawback during bioprocess development. In recent years, several commercial microbioreactor systems have emerged featuring parallelized experimentation with optical monitoring. However, many devices remain limited to batch mode and do not represent the fed-batch strategy typically applied on an industrial scale. A workflow for 32-fold parallelized microscale cultivation of protein secreting Corynebacterium glutamicum in microtiter plates incorporating online monitoring, pH control and feeding was developed and validated. Critical interference of the essential media component protocatechuic acid with pH measurement was revealed, but was effectively resolved by 80% concentration reduction without affecting biological performance. Microfluidic pH control and feeding (pulsed, constant and exponential) were successfully implemented: Whereas pH control improved performance only slightly, feeding revealed a much higher optimization potential. Exponential feeding with µ = 0.1 h-1 resulted in the highest product titers. In contrast, other performance indicators such as biomass-specific or volumetric productivity resulted in different optimal feeding regimes.

Combinatorial impact of Sec signal peptides from Bacillus subtilis and bioprocess conditions on heterologous cutinase secretion by Corynebacterium glutamicum.

The impact of Sec signal peptides (SPs) from Bacillus subtilis in combination with isopropyl-ß- d-1-thiogalactopyranoside concentration and feeding profile was investigated for heterologous protein secretion performance by Corynebacterium glutamicum using cutinase as model enzyme. Based on a comprehensive data set of about 150 bench-scale bioreactor cultivations in fed-batch mode and choosing the cutinase yield as objective, it was shown that relative secretion performance for bioprocesses remains very similar, irrespective of the applied SP enabling Sec-mediated cutinase secretion. However, to achieve the maximal absolute cutinase yield, careful adjustment of bioprocess conditions was found to be necessary. A model-based, two-step multiple regression approach resembled the collected data in a comprehensive way. The corresponding results suggest that the choice of the heterologous Sec SP and its interaction with the adjusted exponential feeding profile is highly relevant to maximize absolute cutinase yield in this study. For example, the impact of Sec SP is high at low growth rates and low at high growth rates. However, promising Sec SPs could be inferred from less complex batch cultivations. The extensive data were also evaluated in terms of cutinase productivity, highlighting the well-known trade-off between yield and productivity in bioprocess development in detail. Conclusively, only the right combination of target protein, Sec SP, and bioprocess conditions is the key to success.

FeedER: a feedback-regulated enzyme-based slow-release system for fed-batch cultivation in microtiter plates.

With the advent of modern genetic engineering methods, microcultivation systems have become increasingly important tools for accelerated strain phenotyping and bioprocess engineering. While these systems offer sophisticated capabilities to screen batch processes, they lack the ability to realize fed-batch processes, which are used more frequently in industrial bioprocessing. In this study, a novel approach to realize a feedback-regulated enzyme-based slow-release system (FeedER), allowing exponential fed-batch for microscale cultivations, was realized by extending our existing Mini Pilot Plant technology with a customized process control system. By continuously comparing the experimental growth rates with predefined set points, the automated dosage of Amyloglucosidase enzyme for the cleavage of dextrin polymers into D-glucose monomers is triggered. As a prerequisite for stable fed-batch operation, a constant pH is maintained by automated addition of ammonium hydroxide. We show the successful application of FeedER to study fed-batch growth of different industrial model organisms including Corynebacterium glutamicum, Pichia pastoris, and Escherichia coli. Moreover, the comparative analysis of a C. glutamicum GFP producer strain, cultivated under microscale batch and fed-batch conditions, revealed two times higher product yields under slow growing fed-batch operation. In summary, FeedER enables to run 48 parallel fed-batch experiments in an automated and miniaturized manner, and thereby accelerates industrial bioprocess development at the screening stage.

Rapid assessment of oxygen transfer impact for Corynebacterium glutamicum.

Oxygen supply is crucial in industrial application of microbial systems, such as Corynebacterium glutamicum, but oxygen transfer is often neglected in early strain characterizations, typically done under aerobic conditions. In this work, a new procedure for oxygen transfer screening is presented, assessing the impact of maximum oxygen transfer conditions (OTRmax) within microtiter plate-based cultivation for enhanced throughput. Oxygen-dependent growth and productivity were characterized for C. glutamicum ATCC13032 and C. glutamicum DM1933 (lysine producer). Biomass and lysine product yield are affected at OTRmax below 14 mmol L(-1) h(-1) in a standardized batch process, but not by further increase of OTRmax above this threshold value indicating a reasonable tradeoff between power input and oxygen transfer capacity OTRmax. The described oxygen transfer screening allows comparative determination of metabolic robustness against oxygen transfer limitation and serves identification of potential problems or opportunities later created during scale-up.

Microbioreactor-assisted cultivation workflows for time-efficient phenotyping of protein producing Aspergillus niger in batch and fed-batch mode.

In recent years, many fungal genomes have become publicly available. In combination with novel gene editing tools, this allows for accelerated strain construction, making filamentous fungi even more interesting for the production of valuable products. However, besides their extraordinary production and secretion capacities, fungi most often exhibit challenging morphologies, which need to be screened for the best operational window. Thereby, combining genetic diversity with various environmental parameters results in a large parameter space, creating a strong demand for time-efficient phenotyping technologies. Microbioreactor systems, which have been well established for bacterial organisms, enable an increased cultivation throughput via parallelization and miniaturization, as well as enhanced process insight via non-invasive online monitoring. Nevertheless, only few reports about microtiter plate cultivation for filamentous fungi in general and even less with online monitoring exist in literature. Moreover, screening under batch conditions in microscale, when a fed-batch process is performed in large-scale might even lead to the wrong identification of optimized parameters. Therefore, in this study a novel workflow for Aspergillus niger was developed, allowing for up to 48 parallel microbioreactor cultivations in batch as well as fed-batch mode. This workflow was validated against lab-scale bioreactor cultivations to proof scalability. With the optimized cultivation protocol, three different micro-scale fed-batch strategies were tested to identify the best protein production conditions for intracellular model product GFP. Subsequently, the best feeding strategy was again validated in a lab-scale bioreactor.

A closer look at Aspergillus: online monitoring via scattered light enables reproducible phenotyping.

BACKGROUND: Filamentously growing microorganisms offer unique advantages for biotechnological processes, such as extraordinary secretion capacities, going along with multiple obstacles due to their complex morphology. However, limited experimental throughput in bioprocess development still hampers taking advantage of their full potential. Miniaturization and automation are powerful tools to accelerate bioprocess development, but so far the application of such technologies has mainly been focused on non-filamentous systems. During cultivation, filamentous fungi can undergo remarkable morphological changes, creating challenging cultivation conditions. Depending on the process and product, only one specific state of morphology may be advantageous to achieve e.g. optimal productivity or yield. Different approaches to control morphology have been investigated, such as microparticle enhanced cultivation. However, the addition of solid microparticles impedes the optical measurements typically used by microbioreactor systems and thus alternatives are needed. RESULTS: Aspergillus giganteus IfGB 0902 was used as a model system to develop a time-efficient and robust workflow allowing microscale cultivation with increased throughput. The effect of microtiter plate geometry, shaking frequency and medium additives (talc and calcium chloride) on homogeneity of culture morphology as well as reproducibility were analyzed via online biomass measurement, microscopic imaging and cell dry weight. While addition of talc severely affected online measurements, 2% (w v-1) calcium chloride was successfully applied to obtain a highly reproducible growth behavior with homogenous morphology. Furthermore, the influence of small amounts of complex components was investigated for the applied model strain. By correlation to cell dry weight, it could be shown that optical measurements are a suitable signal for biomass concentration. However, each correlation is only applicable for a specific set of cultivation parameters. These optimized conditions were used in micro as well as lab-scale bioreactor cultivation in order to verify the reproducibility and scalability of the setup. CONCLUSION: A robust workflow for A. giganteus was developed, allowing for reproducible microscale cultivation with online monitoring, where calcium chloride is an useful alternative to microparticle enhanced cultivation in order to control the morphology. Independent of the cultivation volume, comparable phenotypes were observed in microtiter plates and in lab-scale bioreactor.

Stationary versus non-stationary (13)C-MFA: a comparison using a consistent dataset.

Besides the well-established (13)C-metabolic flux analysis ((13)C-MFA) which characterizes a cell's fluxome in a metabolic and isotopic stationary state a current area of research is isotopically non-stationary MFA. Non-stationary (13)C-MFA uses short-time isotopic transient data instead of long-time isotopic equilibrium data and thus is capable to resolve fluxes within much shorter labeling experiments. However, a comparison of both methods with data from one single experiment has not been made so far. In order to create a consistent database for directly comparing both methods a (13)C-labeling experiment in a fed-batch cultivation with a Corynebacterium glutamicum lysine producer was carried out. During the experiment the substrate glucose was switched from unlabeled to a specifically labeled glucose mixture which was immediately traced by fast sampling and metabolite quenching. The time course of labeling enrichments in intracellular metabolites until isotopic stationarity was monitored by LC-MS/MS. The resulting dataset was evaluated using the classical as well as the isotopic non-stationary MFA approach. The results show that not only the obtained relative data, i.e. intracellular flux distributions, but also the more informative quantitative fluxome data significantly depend on the combination of the measurements and the underlying modeling approach used for data integration. Taking further criteria on the experimental and computational part into consideration, the current limitations of both methods are demonstrated and possible pitfalls are concluded.

Effect of pyruvate dehydrogenase complex deficiency on L-lysine production with Corynebacterium glutamicum.

Intracellular precursor supply is a critical factor for amino acid productivity of Corynebacterium glutamicum. To test for the effect of improved pyruvate availability on L-lysine production, we deleted the aceE gene encoding the E1p enzyme of the pyruvate dehydrogenase complex (PDHC) in the L-lysine-producer C. glutamicum DM1729 and characterised the resulting strain DM1729-BB1 for growth and L-lysine production. Compared to the host strain, C. glutamicum DM1729-BB1 showed no PDHC activity, was acetate auxotrophic and, after complete consumption of the available carbon sources glucose and acetate, showed a more than 50% lower substrate-specific biomass yield (0.14 vs 0.33 mol C/mol C), an about fourfold higher biomass-specific L-lysine yield (5.27 vs 1.23 mmol/g cell dry weight) and a more than 40% higher substrate-specific L-lysine yield (0.13 vs 0.09 mol C/mol C). Overexpression of the pyruvate carboxylase or diaminopimelate dehydrogenase genes in C. glutamicum DM1729-BB1 resulted in a further increase in the biomass-specific L-lysine yield by 6 and 56%, respectively. In addition to L-lysine, significant amounts of pyruvate, L-alanine and L-valine were produced by C. glutamicum DM1729-BB1 and its derivatives, suggesting a surplus of precursor availability and a further potential to improve L-lysine production by engineering the L-lysine biosynthetic pathway.