α-Gal present on both glycolipids and glycoproteins contributes to immune response in meat-allergic patients.

BACKGROUND: The α-Gal syndrome is associated with the presence of IgE directed to the carbohydrate galactose-α-1,3-galactose (α-Gal) and is characterized by a delayed allergic reaction occurring 2 to 6 hours after ingestion of mammalian meat. On the basis of their slow digestion and processing kinetics, α-Gal-carrying glycolipids have been proposed as the main trigger of the delayed reaction. OBJECTIVE: We analyzed and compared the in vitro allergenicity of α-Gal-carrying glycoproteins and glycolipids from natural food sources. METHODS: Proteins and lipids were extracted from pork kidney (PK), beef, and chicken. Glycolipids were purified from rabbit erythrocytes. The presence of α-Gal and IgE binding of α-Gal-allergic patient sera (n = 39) was assessed by thin-layer chromatography as well as by direct and inhibition enzyme-linked immunosorbent assay. The in vitro allergenicity of glycoproteins and glycolipids from different meat extracts was determined by basophil activation test. Glycoprotein stability was evaluated by simulated gastric and intestinal digestion assays. RESULTS: α-Gal was detected on glycolipids of PK and beef. Patient IgE antibodies recognized α-Gal bound to glycoproteins and glycolipids, although binding to glycoproteins was more potent. Rabbit glycolipids were able to strongly activate patient basophils, whereas lipid extracts from PK and beef were also found to trigger basophil activation, but at a lower capacity compared to the respective protein extracts. Simulated gastric digestion assays of PK showed a high stability of α-Gal-carrying proteins in PK. CONCLUSION: Both α-Gal-carrying glycoproteins and glycolipids are able to strongly activate patient basophils. In PK and beef, α-Gal epitopes seem to be less abundant on glycolipids than on glycoproteins, suggesting a major role of glycoproteins in delayed anaphylaxis upon consumption of these food sources.

Ionic poly(dimethylsiloxane)-silica nanocomposites: Dispersion and self-healing.

Abstract: Poly(dimethylsiloxane) (PDMS)-based nanocomposites have attracted increasing attention due to their inherent outstanding properties. Nevertheless, the realization of high levels of dispersion of nanosilicas in PDMS represents a challenge arising from the poor compatibility between the two components. Herein, we explore the use of ionic interactions located at the interface between silica and a PDMS matrix by combining anionic sulfonate-functionalized silica and cationic ammonium-functionalized PDMS. A library of ionic PDMS nanocomposites was synthesized and characterized to highlight the impact of charge location, density, and molecular weight of ionic PDMS polymers on the dispersion of nanosilicas and the resulting mechanical reinforcement. The use of reversible ionic interactions at the interface of nanoparticles-polymer matrix enables the healing of scratches applied to the surface of the nanocomposites. Molecular dynamics simulations were used to estimate the survival probability of ionic cross-links between nanoparticles and the polymer matrix, revealing a dependence on polymer charge density. Impact statement: Poly(dimethylsiloxane) (PDMS) has been widely used in diverse applications due to its inherent attractive and multifunctional properties including optical transparency, high flexibility, and biocompatibility. The combination of such properties in a single polymer matrix has paved the way toward a wide range of applications in sensors, electronics, and biomedical devices. As a liquid at room temperature, the cross-linking of the PDMS turns the system into a mechanically stable elastomer for several applications. Nanofillers have served as a reinforcing agent to design PDMS nanocomposites. However, due to significant incompatibility between silica and the PDMS matrix, the dispersion of nanosilica fillers has been challenging. One of the existing strategies to improve nanoparticle dispersion consists of grafting oppositely charged ionic functional groups to the nanoparticle surface and the polymer matrix, respectively, creating nanoparticle ionic materials. Here, this approach has been explored further to improve the dispersion of nanosilicas in a PDMS matrix. The designed ionic PDMS nanocomposites exhibit self-healing properties due to the reversible nature of ionic interactions. The developed synthetic approach can be transferred to other kinds of inorganic nanoparticles dispersed in a PDMS matrix, where dispersion at the nanometer scale is a prerequisite for specific applications such as encapsulants for light-emitting diodes (LEDs). Supplementary information: The online version contains supplementary material available at 10.1557/s43577-022-00346-x.

DNA-Coated Functional Oil Droplets.

Many industrial soft materials include oil-in-water (O/W) emulsions at the core of their formulations. By using tuneable interface stabilizing agents, such emulsions can self-assemble into complex structures. DNA has been used for decades as a thermoresponsive, highly specific binding agent between hard and, recently, soft colloids. Up until now, emulsion droplets functionalized with DNA had relatively low coating densities and were expensive to scale up. Here, a general O/W DNA-coating method using functional nonionic amphiphilic block copolymers, both diblock and triblock, is presented. The hydrophilic poly(ethylene glycol) ends of the surfactants are functionalized with azides, allowing for efficient, dense, and controlled coupling of dibenzocyclooctane-functionalized DNA to the polymers through a strain-promoted alkyne-azide click reaction. The protocol is readily scalable due to the triblock's commercial availability. Different production methods (ultrasonication, microfluidics, and membrane emulsification) are used with different oils (hexadecane and silicone oil) to produce functional droplets in various size ranges (submicron, ∼20 and >50 µm), showcasing the generality of the protocol. Thermoreversible submicron emulsion gels, hierarchical "raspberry" droplets, and controlled droplet release from a flat DNA-coated surface are demonstrated. The emulsion stability and polydispersity is evaluated using dynamic light scattering and optical microscopy. The generality and simplicity of the method opens up new applications in soft matter, biotechnological research, and industrial advances.

Pore-functionalized nanoporous materials derived from block copolymers.

This review deals with nanoporous materials made from the self-assembly of block copolymers with a special interest in the chemical functions covering the surface of their nanopores. A detailed overview of the existing methods and strategies to generate well-defined organic functional groups covering the surface of the pore walls is provided. This further enables to finely tune the affinity of the pore walls and to perform well-defined chemical reactions onto them, which is essential for further dedicated applications.

Functionalized nanoporous thin films from metallo-supramolecular diblock copolymers.

A polystyrene-[Ni(2+)]-poly(ethylene oxide) metallo-supramolecular block copolymer (PS-[Ni(2+)]-PEO), where -[ is a terpyridine, is used to create nanoporous thin films with free terpyridine ligands homogenously distributed on the pore walls. The PS-[Ni(2+)]-PEO block copolymer is synthesized by a two step assembly process, and is then self-assembled into a thin film in order to obtain PEO cylinders oriented perpendicularly to the film surface. The supramolecular junction is opened by exposing the film to an excess of a competing ligand, and the free PEO block is then rinsed away by a selective solvent. The presence of the terpyridines on the pore walls is evidenced by fluorescence spectroscopy after formation of a fluorescent complex with an europium salt.

From Ionic Nanoparticle Organic Hybrids to Ionic Nanocomposites: Structure, Dynamics, and Properties: A Review.

Ionic nanoparticle organic hybrids have been the focus of research for almost 20 years, however the substitution of ionic canopy by an ionic-entangled polymer matrix was implemented only recently, and can lead to the formulation of ionic nanocomposites. The functionalization of nanoparticle surface by covalently grafting a charged ligand (corona) interacting electrostatically with the oppositely charged canopy (polymer matrix) can promote the dispersion state and stability which are prerequisites for property "tuning", polymer reinforcement, and fabrication of high-performance nanocomposites. Different types of nanoparticle, shape (spherical or anisotropic), loading, graft corona, polymer matrix type, charge density, molecular weight, can influence the nanoparticle dispersion state, and can alter the rheological, mechanical, electrical, self-healing, and shape-memory behavior of ionic nanocomposites. Such ionic nanocomposites can offer new properties and design possibilities in comparison to traditional polymer nanocomposites. However, to achieve a technological breakthrough by designing and developing such ionic nanomaterials, a synergy between experiments and simulation methods is necessary in order to obtain a fundamental understanding of the underlying physics and chemistry. Although there are a few coarse-grained simulation efforts to disclose the underlying physics, atomistic models and simulations that could shed light on the interphase, effect of polymer and nanoparticle chemistry on behavior, are completely absent.

Reinforcement of Styrene Butadiene Rubber Employing Poly(isobornyl methacrylate) (PIBOMA) as High Tg Thermoplastic Polymer.

A set of poly(isobornyl methacrylate)s (PIBOMA) having molar mass in the range of 26,000-283,000 g mol-1 was prepared either via RAFT process or using free radical polymerization. These linear polymers demonstrated high glass transition temperatures (Tg up to 201 °C) and thermal stability (Tonset up to 230 °C). They were further applied as reinforcing agents in the preparation of the vulcanized rubber compositions based on poly(styrene butadiene rubber) (SBR). The influence of the PIBOMA content and molar mass on the cure characteristics, rheological and mechanical properties of rubber compounds were studied in detail. Moving die rheometry revealed that all rubber compounds filled with PIBOMA demonstrated higher torque increase values ΔS in comparison with rubber compositions without filler, independent of PIBOMA content or molar mass, thus confirming its reinforcing effect. Reinforcement via PIBOMA addition was also observed for vulcanized rubbers in the viscoelastic region and the rubbery plateau, i.e. from -20 to 180 °C, by dynamic mechanical thermal analysis. Notably, while at temperatures above ~125 °C, ultra-high-molecular-weight polyethylene (UHMWPE) rapidly loses its ability to provide reinforcement due to softening/melting, all PIBOMA resins maintained their ability to reinforce rubber matrix up to 180 °C. For rubber compositions containing 20 phr of PIBOMA, both tensile strength and elongation at break decreased with increasing PIBOMA molecular weight. In summary, PIBOMA, with its outstanding high Tg among known poly(methacrylates), may be used in the preparation of advanced high-stiffness rubber compositions, where it provides reinforcement above 120 °C and gives properties appropriate for a range of applications.

Polymer Conformations, Entanglements and Dynamics in Ionic Nanocomposites: A Molecular Dynamics Study.

We investigate nanoparticle (NP) dispersion, polymer conformations, entanglements and dynamics in ionic nanocomposites. To this end, we study nanocomposite systems with various spherical NP loadings, three different molecular weights, two different Bjerrum lengths, and two types of charge-sequenced polymers by means of molecular dynamics simulations. NP dispersion can be achieved in either oligomeric or entangled polymeric matrices due to the presence of electrostatic interactions. We show that the overall conformations of ionic oligomer chains, as characterized by their radii of gyration, are affected by the presence and the amount of charged NPs, while the dimensions of charged entangled polymers remain unperturbed. Both the dynamical behavior of polymers and NPs, and the lifetime and amount of temporary crosslinks, are found to depend on the ratio between the Bjerrum length and characteristic distance between charged monomers. Polymer-polymer entanglements start to decrease beyond a certain NP loading. The dynamics of ionic NPs and polymers is very different compared with their non-ionic counterparts. Specifically, ionic NP dynamics is getting enhanced in entangled matrices and also accelerates with the increase of NP loading.

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries.

Lithium metal anodes have been pursued for decades as a way to significantly increase the energy density of lithium-ion batteries. However, safety risks caused by flammable liquid electrolytes and short circuits due to lithium dendrite formation during cell cycling have so far prevented the use of lithium metal in commercial batteries. Solid polymer electrolytes (SPEs) offer a potential solution if their mechanical properties and ionic conductivity can be simultaneously engineered. Here, we introduce a family of SPEs that are scalable and easy to prepare with a photopolymerization process, synthesized from amphiphilic acrylic polymer conetworks based on poly(ethylene glycol), 2-hydroxy-ethylacrylate, norbornyl acrylate, and either lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) or a single-ion polymethacrylate as lithium-ion source. Several conetworks were synthesized and cycled, and their ionic conductivity, mechanical properties, and lithium transference number were characterized. A single-ion-conducting polymer electrolyte shows the best compromise between the different properties and extends the calendar life of the cell.

Linear and Nonlinear Dynamic Behavior of Polymer Micellar Assemblies Connected by Metallo-Supramolecular Interactions.

The linear and nonlinear rheology of associative colloidal polymer assemblies with metallo-supramolecular interactions is herein studied. Polystyrene-b-poly(tert-butylacrylate) with a terpyridine ligand at the end of the acrylate block is self-assembled into micelles in ethanol, a selective solvent for the latter block, and supramolecularly connected by complexation to divalent metal ions. The dependence of the system elasticity on polymer concentration can be semi-quantitatively understood by a geometrical packing model. For strongly associated (Ni2+, Fe2+) and sufficiently concentrated systems (15 w/v%), any given ligand end-group has a virtually 100% probability of being located in an overlapping hairy region between two micelles. By assuming a 50% probability of intermicellar crosslinks being formed, an excellent prediction of the plateau modulus was achieved and compared with the experimental results. For strongly associated but somewhat more dilute systems (12 w/v%) that still have significant overlap between hairy regions, the experimental modulus was lower than the predicted value, as the effective number of crosslinkers was further reduced along with possible density heterogeneities. The reversible destruction of the network by shear forces can be observed from the strain dependence of the storage and loss moduli. The storage moduli of the Ni2+ and Zn2+ systems at a lower concentration (12 w/v%) showed a rarely observed feature (i.e., a peak at the transition from linear to nonlinear regime). This peak disappeared at a higher concentration (15 w/v%). This behavior can be rationalized based on concentration-dependent network stretchability.

Palladium N-Heterocyclic Carbene Precatalyst Site Isolated in the Core of a Star Polymer.

An approach for supporting a Pd-NHC complex on a soluble star polymer with nanoscale dimensions is described. The resulting star polymer catalyst exhibits excellent activity in cross-coupling reactions, is stable in air and moisture, and is easily recoverable and recyclable. These properties are distinct and unattainable with the small-molecule version of the same catalyst.

Star block-copolymers: enzyme-inspired catalysts for oxidation of alcohols in water.

A number of fluorous amphiphilic star block-copolymers containing a tris(benzyltriazolylmethyl)amine motif have been prepared. These polymers assembled into well-defined nanostructures in water, and their mode of assembly could be controlled by changing the composition of the polymer. The polymers were used for enzyme-inspired catalysis of alcohol oxidation.

Metallo-supramolecular diblock copolymers based on heteroleptic cobalt(III) and nickel(II) bis-terpyridine complexes.

Amphiphilic metallo-supramolecular diblock copolymers containing either a reversible cobalt(III) or nickel(II) heteroleptic bis-terpyridine complex at the junction between a polystyrene and a poly(ethylene oxide) block have been successfully prepared.