Push-out Bond Strength of Fiber Posts Cemented Using New Universal Adhesives on Etched and Nonetched Intraradicular Dentin.

AIM: The aim of this study was to assess if the curing mode and the etching mode could affect the push-out bond strength of different post cementation systems using two universal adhesives. MATERIALS AND METHODS: A total of 100 single-rooted teeth were divided into Prime & Bond Elect (PBE), Prime & Bond Active (PBA), and Prime & Bond XP (PBXP) as a control. The PBE, PBA, and PBXP were used in the self-etch (SE) and etch and rinse (E&R) mode. Post cementation was performed using Core X flow used in dark-cure and in light-cure. Data were analyzed using the one-way ANOVA test and post hoc Bonferroni and Dunnet tests. The Student's t test was performed to find significance between two independent groups. RESULTS: Bond strength was significantly influenced by the adhesive strategies. The PBE and PBA obtained higher values when used in the SE mode (p < 0.001). Light-cured groups obtained significantly higher values (p < 0.001) compared to dark-cured groups. The post space region also had a significant effect on the bond strength; the apical third recorded lower values in all groups (p < 0.001). CONCLUSION: The PBA and PBE universal adhesives obtained higher PBS values when used in the SE mode and followed by the light-curing of resin cement. CLINICAL SIGNIFICANCE: Universal adhesives represent a good alternative to the conventional total-etch adhesive system for fiber post cementation. Since they perform better in SE, they would be recommendable in clinical practice, as they can be used with a simplified technique.

Effectiveness of irrigation strategies on the removal of the smear layer from root canal dentin.

The aim of this study was to evaluate the removal of the smear layer by some commonly used (needle-and-syringe irrigation, sonic activation, ultrasonically activated irrigation) and new root canal irrigation strategies (negative pressure irrigation and polymer rotary file) using a novel approach by comparing pre- and post-experimental images. Prepared root canals (n = 50) were subjected to a split tooth model and divided into 5 groups (n = 10): (1) needle-and-syringe irrigation (control); (2) sonic activation (SA); (3) negative pressure irrigation with continuous warm activated irrigation and evacuation (CWA); (4) polymer finishing file (FF); (5) ultrasonically activated irrigation (UAI). Smear layer scores and percentage of open dentinal tubules (%ODT) were evaluated by 2 examiners before and after irrigation procedures, from the middle and apical thirds of the root canal, on scanning electron microscopic images. Data were analysed using Kruskal-Wallis and post hoc tests at P = 0.05. Needle-and-syringe irrigation (control) showed no significant difference (both smear score and %ODT) compared to the pre-experimental value (P > 0.05). All other groups showed lower smear scores and higher %ODT, compared to the control (P < 0.05). The lowest smear score and highest %ODT were observed in the CWA group, which was significantly different from all other groups (P < 0.05). SA group showed significantly higher smear scores and lower %ODT than FF or UAI (P < 0.05). CWA showed superior removal of smear layer in the middle and apical thirds of the root canal compared to the other irrigation strategies.

Structural and Morphological Evaluation of Presintered Zirconia following Different Surface Treatments.

AIM: The aim of this study was to evaluate the effect of different surface treatments on roughness, grain size, and phase transformation of presintered zirconia. MATERIALS AND METHODS: Surface treatments included airborne particle abrasion (APA) before and after sintering with different particles shape, size, and pressure (50 µm Al2O3, 50 µm glass beads, and ceramic powder). Thirty-five square-shaped presin-tered yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic slabs (Zenostar ZR bridge, Wieland) were prepared (4 mm height × 10 mm width × 10 mm length) and polished with silicon carbide grit papers #800, 1000, 1200, 1500, and 2000 to ensure identical initial roughness. Specimens were divided into five groups according to surface treatment: group I (control): no surface treatment; group II: APA 50 µm Al2O3 after sintering; group III: APA 50 µm Al2O3 particles before sintering; group IV: APA 50 µm glass bead particles before sintering; and group V: APA ceramic powder before sintering. Specimens were analyzed using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) analyses, and tested for shear bond strength (SBS). Data were statistically analyzed using one-way analysis of variance (ANOVA) followed by post hoc tests for multiple comparisons Tukey's test (a > 0.05). RESULTS: Air abrasion before sintering significantly increased the surface roughness when compared with groups I and III. The highest tetragonal to monoclinic (t-m) phase transformation (0.07%) was observed in group III, and a reverse transformation was observed in presintered groups (0.01%). Regarding bond strength, there was a significant difference between APA procedures pre- and postsintering. CONCLUSION: Air abrasion before sintering is a valuable method for increasing surface roughness and SBS. The abrasive particles' size and type used before sintering had a little effect on phase transformation. CLINICAL SIGNIFICANCE: Air abrasion before sintering could be supposed to be an alternative surface treatment method to air abrasion after sintering.

Evolution of Nickel-titanium Alloys in Endodontics.

To improve clinical use of nickel-titanium (NiTi) endodontic rotary instruments by better understanding the alloys that compose them. A large number of engine-driven NiTi shaping instruments already exists on the market and newer generations are being introduced regularly. While emphasis is being put on design and technique, manufacturers are more discreet about alloy characteristics that dictate instrument behavior. Along with design and technique, alloy characteristics of endodontic instruments is one of the main variables affecting clinical performance. Modification in NiTi alloys is numerous and may yield improvements, but also drawbacks. Martensitic instruments seem to display better cyclic fatigue properties at the expense of surface hardness, prompting the need for surface treatments. On the contrary, such surface treatments may improve cutting efficiency but are detrimental to the gain in cyclic fatigue resistance. Although the design of the instrument is vital, it should in no way cloud the importance of the properties of the alloy and how they influence the clinical behavior of NiTi instruments. CLINICAL SIGNIFICANCE: Dentists are mostly clinicians rather than engineers. With the advances in instrumentation design and alloys, they have an obligation to deal more intimately with engineering consideration to not only take advantage of their possibilities but also acknowledge their limitations.

Application of Tribology Concept in Dental Composites Field: A Scoping Review.

Tribology is the discipline concerning the application of friction, lubrication, and wear concepts of interacting surfaces in relative motion. A growing interest has developed in tribology application in medical biomaterials, such as resin composites used in restorative dentistry. Yet, the keywords "tribology" and "biotribology" are little applied in the pertinent publications. The aim of this scoping review was to offer an overview of tribology application in dental composites research and to identify knowledge gaps and address future research. A literature search was conducted on Pubmed and Scopus databases and the studies investigating the tribological behavior of resin composites were included for qualitative synthesis. The majority of studies on dental tribology were published in the research areas of mechanical engineering/nanotechnology and differed in several methodological aspects. The preponderant engineering approach and the lack of standardized testing make the laboratory findings poorly informative for clinicians. Future research should focus on the tribological behavior of dental materials composites by means of an integrated approach, i.e., engineering and clinical, for improving development and advancement in this field of research.

Worldwide Assessment of the Mandibular First Molar Second Distal Root and Root Canal: A Cross-sectional Study with Meta-analysis.

INTRODUCTION: This study assessed the prevalence of radix entomolaris and 2 canals at the distal aspect of mandibular first molars among different geographic regions by means of cone-beam computed tomographic imaging. METHODS: Precalibrated observers from 23 worldwide geographic locations followed a standardized screening protocol to assess 5750 cone-beam computed tomographic images of mandibular first molars (250 per region), gathering demographic data and recording the presence of radix entomolaris and a second canal at the distal aspect of teeth. Intra- and interrater reliability tests were conducted and comparisons among groups were performed using proportions and odds ratio forest plots. The significance level was set at 5%. RESULTS: The results of intra- and interrater tests were above 0.79. The prevalence of radix entomolaris varied from 0.9% in Venezuela (95% confidence interval [CI], 0%-1.9%) to 22.4% in China (95% CI, 17.2%-27.6%). Regarding the proportion of a second distal canal, it ranged from 16.4% in Venezuela (95% CI, 11.8%-21.0%) to 60.0% in Egypt (95% CI, 53.9%-66.1%). The East Asia subgroup was associated with a significantly higher prevalence of an extra distolingual root, whereas the American subgroup, the American native ethnic group, and elderly patients were linked to significantly lower percentages of a second canal at the distal aspect of teeth. No significant differences were noted between male or female patients. CONCLUSIONS: The overall worldwide prevalence rates of radix entomolaris and a second canal at the distal aspect of the mandibular first molar were 5.6% and 36.9%, respectively. The East Asia geographic region and Asian ethnic group had a higher prevalence of a second distal root.

Evaluation of the fracture resistance of reattached incisal fragments using different materials and techniques.

OBJECTIVES: When coronal fracture occurs in anterior teeth, fragment reattachment can be a valid alternative to a direct restoration. The aim of this study was to evaluate the influence of the material and the technique used to reattach the fragment. MATERIALS AND METHODS: Eighty sound maxillary and mandibular incisors were selected and randomly divided into eight groups (n = 10). The incisal third of each tooth was removed using a saw machine. The fragments in groups 1-4 were reattached using resin-based materials: group 1 adhesive, group 2 flow, group 3 composite, group 4 cement; in groups 5-8, the same materials mentioned before were used but a bevel was also performed on both labial and lingual surfaces. Shear bond strength (SBS) was calculated by applying a load incisal to the reattachment line. A two-way Anova was used to evaluate the influence of materials and techniques on the SBS. RESULTS: The technique used was statistically significant (P < 0.001), while the material was not (P = 0.793). CONCLUSIONS: The choice of material seems to have no influence on the SBS, whereas a bevel performed on the labial and lingual surfaces can significantly improve the SBS of the reattached fragment.

Immediate and Delayed Bond Strength of a Multimode Adhesive to Deep Coronal Dentin Following Different Root Canal Irrigation Regimens.

PURPOSE: To investigate the effects of root canal irrigants, dentin surface treatment, and timing of the restoration on the microtensile bond strength (µTBS) of a universal adhesive to deep coronal dentin. MATERIALS AND METHODS: Ninety (90) intact molars were grouped according to the irrigation protocol: group 0 (saline, control group); group 1: 5.25% sodium hypochlorite (NaOCl), 17% ethylenediaminetetraacetic acid (EDTA) followed by 5.25% NaOCl; group 2: 18% etidronic acid (HEDP) + 5.25% NaOCl in a single mixture. Groups 1 and 2 were divided into 2 subgroups (n = = 10) according to the time of restoration: immediate (subgroup A) and after 7 days (subgroup B). Four other groups (n = 10) were created according to the dentin surface pretreatment and received an immediate restoration: group 3: 5.25% NaOCl - 17% EDTA and AH Plus Cleaner; group 4: 5.25% NaOCl - 17% EDTA and 100% ethanol; group 5: 5.25% NaOCl + 18% HEDP and AH Plus Cleaner; group 6: 5.25% NaOCl + 18% HEDP and 100% ethanol. µTBS testing was carried out for each subgroup and interfaces were analyzed through SEM. The µTBS was analyzed with Welch statistics and the post-hoc Games-Howell test for multiple comparisons (p < 0.05). RESULTS: Statistically significant differences were observed between test groups and control groups (p < 0.001), except for group 3 (p = 0.349). No significant differences were recorded between groups 1A (27.5 ± 8.7 MPa), 2A (32.6 ± 14.5 MPa) and 3 (27.3 ± 14.3 MPa). Group 6 (48.6 ± 11.6 MPa) exhibited the highest µTBS among all tested groups. For groups 1 and 2, significantly higher values were recorded for subgroups 1B (39.3 ± 7.6 MPa) and 2B (43.8 ± 8.3 MPa) compared to subgroups 1A (27.5 ± 8.7 MPa) and 2A (32.6 ± 14.5 MPa). CONCLUSION: When using NaOCl as root canal irrigant, it is advisable to delay the placement of a post-endodontic-treatment restoration.

Worldwide Prevalence of a Lingual Canal in Mandibular Premolars: A Multicenter Cross-sectional Study with Meta-analysis.

INTRODUCTION: The presence of multiple root canals is an important morphologic aspect of mandibular premolars. This study aimed to perform a worldwide analysis on the prevalence of a lingual canal in mandibular premolars and to evaluate its influence on patients' demographics in 23 countries using cone-beam computed tomographic images. METHODS: Observers from 23 countries were instructed to evaluate cone-beam computed tomographic images of 300 first and 300 second premolars (13,800 teeth) regarding the presence of a lingual canal, canal configuration, and data related to patients' ethnicity, age, and sex following a standardized screening methodology. Intra- and interrater evaluations were performed using the Cohen kappa test and intraclass correlation coefficient. Proportion and odds ratio forest plots were calculated in order to compare groups. Statistical significance was set at 5%. RESULTS: Both kappa and intraclass correlation coefficient values were above 0.60, and the percentage of agreement was 94.9% (first premolar) and 97.8% (second premolar). A significant statistical difference was observed between the worldwide proportion of a lingual canal in mandibular first (23.8%; range, 12.0%-32.7%) and second (5.3%; range, 1.0%-15.3%) premolars (P < .05). Asians and patients over 60 years old were associated with the lowest proportions of a lingual canal (P < .05), whereas Africans and younger groups were associated with the highest proportions (P < .05). The prevalence of a lingual canal in males (27.9%) was higher than females (20.0%) for the first premolar only (P < .05). Males were associated with 1.533 and 1.597 higher odds of presenting a lingual root canal in the first and second premolars, respectively. CONCLUSIONS: The worldwide proportion of a lingual root canal was 23.6% and 5.3% for the first and second premolars, respectively. Ethnicity, geographic region, age, and sex had an influence on the outcomes.

Effect of different onlay systems on fracture resistance and failure pattern of endodontically treated mandibular molars restored with and without glass fiber posts.

PURPOSE: To investigate the relationship between post and core build-up materials on the fracture resistance of endodontically treated teeth restored with different onlay restorations. METHODS: 60 mandibular molars were endodontically treated and divided into three experimental groups that received one of the following onlay restorations: gold onlays, glass ceramic onlays (Empress I), or resin composite onlays (Gradia). Half of the specimens in each group received a fiber post (n=10). Two controls groups (n=10) were included: one group composed of sound mandibular molars, and the second group was composed of endodontically treated unrestored molars. Fracture tests were carried out by applying axial load using a universal loading machine until fracture. All fractured specimens were fractographically examined using a scanning electron microscope (SEM). Data were analyzed using two-way ANOVA and Tukey multiple comparison tests (alpha=0.05). RESULTS: Statistical analysis showed that restoration of endodontically treated teeth with gold onlays improved fracture resistance when compared to glass ceramic or resin composite onlays. The presence of a fiber post significantly improved (P<0.045) fracture resistance of gold onlays from 2271 to 2874N while it did not influence the performance of the other two groups. Fractographic analyses revealed that the presence of fiber post resulted in more restorable fractures due to better stress distribution of the applied load. All onlay systems resulted in significant improvement of the fracture resistance compared to unrestored teeth (711N) but neither of them resulted in restoring the fracture resistance to match that of sound teeth (3212 N).

Evaluation Of The Effect Of Different Surface Treatments, Aging And Enzymatic Degradation On Zirconia-Resin Micro-Shear Bond Strength.

PURPOSE: The purpose of this study was to evaluate the effect of surface treatments on zirconia-resin bonding and the effect of aging on bond durability for one year. METHOD: Three hundred and twenty zirconia blocks were divided into 4 equal study groups. Group 1 (control): as-sintered, group 2: (GB): grit-blasted, group 3: (LAS): laser-etched, group 4: (SIE): selective infiltration etching. Composite cylinders were bonded to the zirconia with resin cement and ceramic primer. Aging was performed following 3 different aging protocols: thermocycling, storage in distilled water, or storage in an enzymatic esterase solution. Micro-shear bond strength test (µSBS) was recorded using a universal testing machine. µSBS values were analyzed using two-way Analysis of Variance followed by Tukey post-hoc tests. Level of significance was set at 0.05. RESULTS: GB, LAS and SIE groups showed significantly higher values when compared to control. Groups GB, LAS and SIE reported a significant decrease up to 50% in µSBS after water storage and enzymatic degradation, while control group reported a 90% decrease. Failure analysis showed mainly adhesive failure for control group, while the percentage of cohesive failure in resin cement was higher in SIE group compared to GB and LAS groups. CONCLUSION: Water aging and esterase solutions played a significant role by increasing bond degradation. A minimum of one-year water and esterase storage medium should be used to evaluate the durability of the bond between resin cement and zirconia.

Bond strength of composite core build-up materials to fiber-reinforced posts: a microtensile comparison between conventional and wet-ethanol bonding systems.

PURPOSE: To evaluate the interfacial microtensile bond strength between a fiber-reinforced post (Rely X Post) and a core material (Multicore Flow) after placing different bonding agents. MATERIALS AND METHODS: After post surface treatment, 50 posts were divided into 5 groups. Group 1: Adper Prompt-L-Pop; group 2: SingleBond2; group 3: ScotchBond Multipurpose Plus; group 4: experimental bonding system (wet ethanol bonding technique); group 5: control group. After core reconstruction, the samples were tested with the microtensile test. Fracture type examination and SEM observation followed. Data were statistically analyzed with Kruskall-Wallis non-parametric ANOVA. RESULTS: Microtensile testing revealed significant differences (p < 0.001). There were no differences between groups 1 to 4, but there was a statistically significant difference between groups 1 to 4 and the control. Fracture type observations revealed more adhesive failures than cohesive or mixed ones. CONCLUSION: The experimental bonding technique did not improve bond strength compared to the different adhesive systems tested. However, placing a bonding agent between the post and the core seems to significantly increase microtensile bond strength.

Shaping effectiveness and surface topography of reciprocating files after multiple simulated uses.

This in vitro study assessed morphological changes and efficiency of reciprocating files after multiple uses. Sixty standardized Endo Training Blocks and 10 ReciprocR25 files were selected (six blocks for each file). Each file was its own control (before use vs. after each instrumentation). The instruments were used according to the manufacturer's instructions, and scanning electron microscopy was used to observe fatigue cracks, metal strips/metal flash, pitting, fretting, debris, disruption of the cutting edge, and plastic deformations after each instrumentation. The presence of seven wear variables was scored semiquantitatively by viewing micrographs collected before and after use. The prepared areas in resin blocks were calculated and compared by using AutoCAD software. The control group had significantly lower values for all wear variables except fretting and plastic deformation. The presence of fatigue cracks and metal strips/metal flash significantly differed between unused instruments and instruments used four or five times, in all observed sections. The area of instrumented Endo Training Blocks significantly differed in relation to the number of instrument uses. The Reciproc files wore progressively, and repeated use affected their shaping efficiency in simulated canals.

Quantitative and qualitative elemental analysis of different nickel-titanium rotary instruments by using scanning electron microscopy and energy dispersive spectroscopy.

This study was designed to determine if the alloy composition shares an influence with the geometric design on the physical behavior of nickel-titanium rotary endodontic instruments. ProTaper, HERO, and K3 files were selected. After sterilized and cleaning with alcohol, surface analysis was performed using energy dispersive spectroscopy. Measurements were performed on the active part and on the shank. SEM images of fractured instruments were also obtained and assessed. All three types of instruments were composed mainly of Nickel (54.3%, SD +/- 0.8) and Titanium (45.2%, SD +/- 0.9). SEM images revealed similar aspect with the presence of Kirkendall voids regularly distributed in the alloy. The results indicate that the difference in properties and behavior of these three endodontic rotary shaping instruments is solely related to the respective geometric characteristics of the instrument design.

Fracture resistance and failure patterns of endodontically treated mandibular molars with and without glass fiber post in combination with a zirconia-ceramic crown.

OBJECTIVE: The aim of this study was to investigate the influence of a fiber post on the fracture mechanics of zirconia crowns inserted over endodontically treated teeth with different extent of coronal damage. METHODS: Endodontically treated human molars with three types of coronal damage received fiber posts before cementation of zirconia-veneered crowns. Controls received composite resin cores without fiber posts. The specimens were loaded to failure and fractographically examined using a scanning electron microscope (SEM). RESULTS: Statistical analysis revealed that specimens with fiber posts demonstrated significantly higher failure loads and favorable fracture pattern compared to the controls. At fractographic analysis, specimens with fiber posts demonstrated delamination of the veneer ceramic from intact zirconia under structure. Meanwhile, the specimens that were restored without a fiber post demonstrated micro-cracking of the composite core build-up resulting in loss of the support under the zirconia crowns which was responsible for the initiation of radial crack and catastrophic damage. CONCLUSIONS: Within the limitation of this study, the insertion of fiber post improved the support under zirconia crowns which resulted in higher fracture loads and favorable failure type compared to composite core build-up.

Worldwide Analyses of Maxillary First Molar Second Mesiobuccal Prevalence: A Multicenter Cone-beam Computed Tomographic Study.

INTRODUCTION: Maxillary first molar second mesiobuccal (MB2) root canal prevalence may change among different populations. The aim of this study was to analyze the worldwide prevalence of the MB2 root canal and understand its possible relation with sex, age, side, and root configuration using in vivo cone-beam computed tomographic (CBCT) assessment. METHODS: Observers from 21 regions were calibrated to achieve a similar CBCT assessment methodology and instructed to collect data from 250 maxillary first molars in previously existing examinations. Intra- and interrater reliability tests were performed. The sample size included 5250 molars and was defined by way of a preliminary trial. Data collected included MB2 presence, sex, age, side, number of roots per tooth, and mesiobuccal root configuration. The z test for proportions in independent groups was used to analyze the differences among subgroups. P < .05 was considered significant. RESULTS: The worldwide CBCT-assessed MB2 prevalence was 73.8%, ranging from 48.0% in Venezuela to 97.6% in Belgium. The prevalence in males and females was 76.3% and 71.8%, respectively (P < .05). Significantly higher MB2 proportions were found in younger patients and 3-rooted molar configurations. The group intraclass correlation coefficient and the percentage of agreement for the MB2 presence were 0.95 and 0.91, respectively. The intrarater Cohen kappa value was above 0.61 for all observers. CONCLUSIONS: MB2 prevalence in the analyzed regions varied widely. The differences may be associated with specificities within each region but also patient demographics. Males, younger patients, and 3-rooted configurations were associated with higher MB2 proportions.

Effect of clinical use on the cyclic fatigue resistance of ProTaper nickel-titanium rotary instruments.

The resistance of ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) nickel-titanium rotary instruments to cyclic fatigue was examined after their initial use in straight or curved canals in vivo. These instruments were rotated freely inside a steel phantom until separation. The number of rotations before failure and the lengths of the separated fragments were compared with data derived from new instruments under the same experimental setup (n = 20). With the exception of F1 and F3, instruments previously used in curved canals were more susceptible to cyclic fatigue than those previously used in straight canals (p < 0.05). Separation occurred predominantly at the D10 to D12 level. For the F series, a negative correlation (p < 0.05) was observed between the number of rotations before failure and the file diameters at their separation levels. ProTaper F3 instruments are highly susceptible to cyclic fatigue failure and should be reused with caution irrespective of whether they are initially used for shaping straight or curved canals.

Effect of different all-ceramic crown system on fracture resistance and failure pattern of endodontically treated maxillary premolars restored with and without glass fiber posts.

Endodontically treated teeth are traditionally restored with a crown to prevent fracture. The aim of this study was to compare the fracture resistance and failure modes of endodontically treated maxillary premolars treated with or without a fiber post and restored with different types of crowns. Eighty human maxillary premolars were selected. After root canal treatment, the teeth were embedded in resin blocks and divided into four groups. Samples received MOD cavity preparations and were divided into two subgroups: with and without fiber posts and restored using porcelain fused to metal, lithium disilicate, fiber-reinforced composite, or zirconia crowns. The specimens were vertically loaded in the central fossa using a universal loading machine until failure, and the maximum breaking loads were recorded. Samples were perfused with Indian ink to highlight the fracture lines and the mode of failure that was classified as restorable or nonrestorable. Even without post, all crown designs resisted vertically applied forces beyond those that may be encountered in the mouth. Two-way analysis of variance revealed the use of a fiber post (p = 0.007) and the type of crown (p < 0.001) significantly affected the restorability of fractured teeth. The relationship between placing or not placing the post and the type of failure (restorable/nonrestorable) was found to be significant (chi(2) test, p = 0.002). Although post placement resulted in higher fracture resistance values, these were significant for Empress II crowns only. The results suggest that the posts could contribute to the reinforcement and strengthening of pulpless maxillary premolars. With respect to failure modes, placement of fiber posts improved the fracture from nonrestorable to restorable patterns. This study suggests that the placement of fiber posts is necessary to improve fracture resistance even under full-coverage crowns.

Fracture resistance and failure patterns of endodontically treated mandibular molars restored using resin composite with or without translucent glass fiber posts.

The elastic modulus of the restorative material is important in restoring endodontically treated teeth. This study aimed to compare the fracture resistance and failure patterns of 90 mandibular molars restored using resin composites with or without fiber posts, with respect to the number of residual cavity walls. Five restoration types were performed corresponding to different wall defects (groups 1-5). Groups were divided in two subgroups corresponding to the use or absence of fiber posts. Teeth were loaded and resistance of specimens was measured as the axial compressive load to cause fracture and macroscopic fracture patterns were observed. One way ANOVA revealed a significant difference in fracture resistance (p < 0.001). Tukey post hoc test also revealed significant differences between groups as samples restored with fiber posts exhibited mostly restorable fractures. It was concluded that the resistance of endodontically treated mandibular molars restored with composite resins is mainly affected by the number of residual walls. Using fiber-reinforced posts optimized fracture patterns.

Reduction in antimicrobial substantivity of MTAD after initial sodium hypochlorite irrigation.

Potential intrinsic tetracycline staining of intraradicular dentin has been observed when BioPure MTAD was employed as the final irrigant after initial rinsing with NaOCl. This study examined the effect of NaOCl-MTAD interaction on the antimicrobial substantivity of MTAD in dentin. Dentin cores previously irrigated with either MTAD, or in conjunction with 1.3% NaOCl as an initial irrigant were placed on blood agar plates inoculated with Escherichia faecalis at 10(5) cfu/ml. Dentin cores irrigated with 1.3% NaOCl only, and autoclaved dentin disks were used as the respective positive and negative controls. After anaerobic incubation, the mean diameter of bacterial inhibition zones formed around the MTAD group was significantly larger than the NaOCl/MTAD group, which, in turn, was not significantly different from the NaOCl positive control. Oxidation of MTAD by NaOCl resulted in the partial loss of antimicrobial substantivity in a manner similar to the peroxidation of tetracycline by reactive oxygen species.