Effects of microplastics on the kidneys: a narrative review.

Microplastics (MPs) and nanoplastics are small synthetic organic polymer particles (<5 mm and <1 µm, respectively) that originate directly from plastic compounds or result from the degradation of plastic. These particles are a global concern because they are widely distributed in water, air, food, and soil, and recent scientific evidence has linked MPs to negative biological effects. Although these particles are difficult to detect in humans, MPs have been identified in different biological fluids and tissues, such as the placenta, lung, intestines, liver, blood, urine, and kidneys. Human exposure to MPs can occur by ingestion, inhalation, or dermal contact, potentially causing metabolic alterations. Data from experimental and clinical studies have revealed that the ability of MPs to promote inflammation, oxidative stress, and organ dysfunction and negatively affect clinical outcomes is associated with their accumulation in body fluids and tissues. Although evidence of the putative action of MPs in the human kidney is still scarce, there is growing interest in studying MPs in this organ. In addition, chronic kidney disease requires investigation because this condition is potentially prone to MP accumulation. The purpose of the present article is (i) to review the general aspects of MP generation, available analytic methods for identification, and the main known biological toxic effects; and (ii) to describe and critically analyze key experimental and clinical studies that support a role of MPs in kidney disease.

Leaching and cytotoxicity of bismuth oxide in ProRoot MTA - A laboratory investigation.

AIM: The present study examined the leaching and cytotoxicity of bismuth from ProRoot MTA and aimed to identify whether bismuth leaching was affected by the cement base and the immersion regime used. METHODOLOGY: The leaching profile of bismuth was examined from ProRoot MTA and compared with hydroxyapatite containing 20% bismuth oxide as well as hydroxyapatite and tricalcium silicate to investigate whether bismuth release changed depending on the cement base. Bismuth leaching was determined after 30 and 180 days of ageing immersed in Dulbecco's modified Eagle's medium (DMEM) using mass spectroscopy (ICP-MS). The media were either unchanged or regularly replenished. The pH, surface microstructure and phase changes of aged materials were assessed. Wistar rat femoral bone marrow stromal cells (BMSCs) and cutaneous fibroblasts were isolated, cultured and seeded for cell counting (trypan blue live/dead) after exposure to non-aged, 30- and 180-days-aged samples in regularly replenished DMEM. Aged DMEM in contact with materials was also used to culture BMSCs to investigate the effect of material leachates on the cells. Gene expression analysis was also carried out after direct exposure of cells to non-aged materials. Differences between groups were statistically tested at a significance level of 5%. RESULTS: All materials exhibited alterations after immersion in DMEM and this increased with longer exposure times. The bismuth leached from ProRoot MTA as detected by ICP-MS. Aged ProRoot MTA samples exhibited a black discolouration and surface calcium carbonate deposition. ProRoot MTA influenced cell counts after direct exposure and its 180-days leachates reduced BMSC viability. After direct BMSC contact with non-aged ProRoot MTA an upregulation of metallothionein (MT1 and MT2A) expression and down-regulation of collagen-1a (Col-1a) and bone sialoprotein (BSP) expression was identified. CONCLUSIONS: Bismuth leaching was observed throughout 180-days observation period from all materials containing bismuth oxide. This negatively influenced cell viability and gene expression associated with bismuth exposure. This is the first study to report that metallothionein gene expression was influenced by exposure to ProRoot MTA.

In vitro physicochemical characterization of five root canal sealers and their influence on an ex vivo oral multi-species biofilm community.

AIM: To evaluate the physicochemical properties of five root canal sealers and assess their effect on an ex vivo dental plaque-derived polymicrobial community. METHODOLOGY: Dental plaque-derived microbial communities were exposed to the sealers (AH Plus [AHP], GuttaFlow Bioseal [GFB], Endoseal MTA [ESM], Bio-C sealer [BCS] and BioRoot RCS [BRR]) for 3, 6 and 18 h. The sealers' effect on the biofilm biomass and metabolic activity was quantified using crystal violet (CV) staining and MTT assay, respectively. Biofilm community composition and morphology were assessed by denaturing gradient gel electrophoresis (DGGE), 16S rRNA sequencing and scanning electron microscopy. The ISO6876:2012 specifications were followed to determine the setting time, radiopacity, flowability and solubility. Obturated acrylic teeth were used to assess the sealers' effect on pH. Surface chemical characterization was performed using SEM with coupled energy-dispersive spectroscopy. Data normality was assessed using the Shapiro-Wilk test. One-way anova and Tukey's tests were used to analyze data from setting time, radiopacity, flowability and solubility. Two-way anova and Dunnett's tests were used for the data analysis from CV, MTT and pH. 16S rRNA sequencing data were analyzed for alpha (Shannon index and Chao analysis) and beta diversity (Bray-Curtis dissimilarities). Differences in community composition were evaluated by analysis of similarity (p < .05). RESULTS: The sealers significantly influenced microbial community composition and morphology. All sealers complied with ISO6876:2012 requirements for setting time, radiopacity and flowability. Although only AHP effectively reduced the biofilm biomass, all sealers, except BRR, reduced biofilm metabolic activity. CONCLUSION: Despite adequate physical properties, none of the sealers tested prevented biofilm growth. Significant changes in community composition were observed. If observed in vivo, these changes could affect intracanal microbial survival, pathogenicity and treatment outcomes.

Physicochemical, antimicrobial, and biological properties of White-MTAFlow.

OBJECTIVES: To evaluate a new material containing tantalum oxide as an alternative radiopacifier, and a water-based gel for hydration, in comparison with two calcium silicate-based cement: ProRoot MTA and Biodentine. MATERIALS AND METHODS: ProRoot MTA (Dentsply), Biodentine (Septodont), and a new hydraulic calcium silicate cement White-MTAFlow (Ultradent) (in 'thin' consistency) were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The interaction with dentin was also assessed using SEM and EDS. Physical and chemical properties radiopacity, setting time, linear flow, volumetric central filling, and lateral flow, pH, and volume change were investigated together with the color luminosity (L) and color change (ΔE). The agar diffusion and direct contact antimicrobial activity, and methylthiazolyldiphenyl-tetrazolium-bromide (MTT) cytotoxicity using human fibroblast cells were also evaluated. Data were statistically analyzed at a 5% significance level. RESULTS: All materials were composed of tricalcium and dicalcium silicate but had different radiopacifiers, and calcium hydroxide (portlandite) deposition was detected in XRD analysis. White-MTAFlow exhibited radiopacity values in accordance with ISO standard, and the longest setting time. The water-based gel provided the highest linear flow, a comparable cavity central filling, and the highest groove-lateral flow in the volumetric flow analysis. White-MTAFlow exhibited an alkalinity reduction, and Biodentine, a progressive increase of pH values after 28 days. However, similar volume loss for White-MTAFlow was assessed in comparison to Biodentine after the 28-day immersion. White-MTAFlow showed the highest L value (91.5), and ProRoot MTA the lowest (78.1) due to dentin staining caused by bismuth migration. None of the materials exhibited inhibition halos against the tested bacteria, and similar turbidity values were obtained after 48 h in direct contact with E. faecalis, indicating an upregulation to bacterial growth. White-MTAFlow showed MTT cytocompatibility similarly to the control group. CONCLUSIONS: White-MTAFlow in 'thin' consistency presents comparable physicochemical, biological, and antimicrobial properties to ProRoot MTA and Biodentine, and does not cause color alteration in dentin. CLINICAL RELEVANCE: White-MTAFlow is a suitable material for use as reparative endodontic cement. Further studies considering its biocompatibility are necessary.

Physico-chemical properties of calcium silicate-based sealers in powder/liquid and ready-to-use forms.

Calcium silicate-based root canal sealers have been developed in powder/liquid or premixed ready-to-use forms. The evaluation of the physico-chemical properties of a prototype powder/liquid MTApex Sealer (Ultradent) in comparison to a ready-to-use material EndoSequence BC Sealer (Brasseler) was performed. The paste/paste epoxy resin-based AH Plus (Dentsply) served as control for comparisons. The sealers were evaluated (n = 6) regarding setting time (in dry and moist environments), flow and radiopacity, following the ISO-6876/2012 standard. Also, the pH was assessed. Material's surface and chemical characterization was evaluated using scanning-electron-microscopy (SEM) and energy-dispersive-spectrometry (EDS). Mixed ANOVA, Shapiro-Wilk, Levene, and post-hoc analysis with Bonferroni correction were performed at a significance level of 5%. MTApex Sealer exhibited the highest flow and EndoSequence BC Sealer had a significantly longer setting time in dry compared to the moist environment; however, for MTApex Sealer and AH Plus no significant changes occurred when additional moisture was provided. All materials exceeded 7 mm Al of radiopacity and showed a decreasing alkalinity over the 21 day-analysis. SEM/EDS evaluation resulted in peaks of calcium, silicon, and the respective radiopacifier. The prototype powder/liquid MTApex Sealer had the highest flow and similar setting time in both dry and moist environments; opposingly, EndoSequence BC Sealer was crucially influenced by external moisture. This suggests that the powder/liquid materials' setting seems to be more predictable.

Effects of Bismuth Exposure on the Human Kidney-A Systematic Review.

The effects of bismuth toxicity on the kidney-the main organ responsible for blood filtration-were systematically reviewed. This review was motivated by availability of several sources of bismuth in contact with humans including environmental, medications, dental materials, and cosmetics, potentially leading to kidney filtration of this chemical. No previous studies have systematically reviewed the literature considering this association. A total of 22 studies with a total of 46 individuals met the inclusion criteria, 19 being case reports with only one patient enrolled. The included studies publication dates ranged from 1961 to 2021 and the countries of publication were the United States of America, United Kingdom, Germany, Turkey, Switzerland, and Canada. Bismuth sources affecting the kidneys were uniquely reported as from medical purposes and mostly associated to overdoses with several symptoms, apparently with dose-dependent consequences. Patient history of renal impairment seemed to affect the outcome of the case. Several therapies were conducted following bismuth intoxication, and few studies performed renal biopsies describing its histological findings. It is crucial to reconsider the nephrotoxicity of bismuth compounds, mainly in patients with previous history of renal impairment.

Physico-chemical properties of calcium silicate-based sealers in powder/liquid and ready-to-use forms

Abstract Calcium silicate-based root canal sealers have been developed in powder/liquid or premixed ready-to-use forms. The evaluation of the physico-chemical properties of a prototype powder/liquid MTApex Sealer (Ultradent) in comparison to a ready-to-use material EndoSequence BC Sealer (Brasseler) was performed. The paste/paste epoxy resin-based AH Plus (Dentsply) served as control for comparisons. The sealers were evaluated (n = 6) regarding setting time (in dry and moist environments), flow and radiopacity, following the ISO-6876/2012 standard. Also, the pH was assessed. Material's surface and chemical characterization was evaluated using scanning-electron-microscopy (SEM) and energy-dispersive-spectrometry (EDS). Mixed ANOVA, Shapiro-Wilk, Levene, and post-hoc analysis with Bonferroni correction were performed at a significance level of 5%. MTApex Sealer exhibited the highest flow and EndoSequence BC Sealer had a significantly longer setting time in dry compared to the moist environment; however, for MTApex Sealer and AH Plus no significant changes occurred when additional moisture was provided. All materials exceeded 7 mm Al of radiopacity and showed a decreasing alkalinity over the 21 day-analysis. SEM/EDS evaluation resulted in peaks of calcium, silicon, and the respective radiopacifier. The prototype powder/liquid MTApex Sealer had the highest flow and similar setting time in both dry and moist environments; opposingly, EndoSequence BC Sealer was crucially influenced by external moisture. This suggests that the powder/liquid materials' setting seems to be more predictable.

Resumo Os cimentos endodônticos obturadores à base de silicato de cálcio foram desenvolvidos em formas pó/líquido ou pré-misturadas prontas para o uso. Foi realizada a avaliação das propriedades físico-químicas de um protótipo pó/líquido MTApex Sealer (Ultradent) em comparação com um material pronto para uso EndoSequence BC Sealer (Brasseler). O cimento obturador pasta/pasta à base de resina epóxi AH Plus (Dentsply) serviu de controle para as comparações. Os cimentos foram avaliados (n = 6) quanto a: tempo de presa (em ambientes secos e úmidos), escoamento e radiopacidade, seguindo a norma ISO-6876/2012; como também o pH. A superfície do material e a caracterização química foram realizadas utilizando a microscopia eletrônica de varredura (MEV) e espectrometria dispersiva de energia (EDS). ANOVA, Shapiro-Wilk, Levene e análise post-hoc com correção de Bonferroni foram realizadas com nível de significância de 5%. O MTApex Sealer exibiu um escoamento mais alto e o EndoSequence BC Sealer teve um tempo de presa significativamente mais longo em ambiente seco em comparação com o ambiente úmido; entretanto, para MTApex Sealer e AH Plus, nenhuma mudança significativa ocorreu quando umidade adicional foi fornecida. Todos os materiais excederam 7 mm de Al de radiopacidade e mostraram uma alcalinidade decrescente ao longo dos 21 dias de análise. A avaliação MEV/EDS resultou em picos de cálcio, silício e respectivo radiopacificador. O protótipo de pó/líquido MTApex Sealer teve o maior escoamento e tempo de presa semelhante em ambientes secos e úmidos; ao contrário, o EndoSequence BC Sealer foi influenciado de maneira crucial pela umidade externa. Isso sugere que a configuração dos materiais em pó/líquido parece ser mais previsível.