A Versatile High-Vacuum Cryo-transfer System for Cryo-microscopy and Analytics.

Cryogenic microscopy methods have gained increasing popularity, as they offer an unaltered view on the architecture of biological specimens. As a prerequisite, samples must be handled under cryogenic conditions below their recrystallization temperature, and contamination during sample transfer and handling must be prevented. We present a high-vacuum cryo-transfer system that streamlines the entire handling of frozen-hydrated samples from the vitrification process to low temperature imaging for scanning transmission electron microscopy and transmission electron microscopy. A template for cryo-electron microscopy and multimodal cryo-imaging approaches with numerous sample transfer steps is presented.

Daptomycin: local application in implant-associated infection and complicated osteomyelitis.

BACKGROUND: The rise of highly resistant bacteria creates a persistent urge to develop new antimicrobial agents. This paper investigates the application of the lipopeptide antibiotic daptomycin in infections involving the human bone. METHODS: Compressive and tensile strength testing of daptomycin-laden PMMA was performed referring to the ISO 5833. The microstructure of the antibiotic-laden PMMA was evaluated by scanning electron microscopy. Intracellular activity of daptomycin was determined by a human osteoblast infection model. Elution kinetics of the antibiotic-laden bone cement was measured by using a continuous flow chamber setup. RESULTS: There was no significant negative effect of adding 1.225% and 7.5% per weight of daptomycin to the PMMA. There was no significant difference in intracellular activity comparing gentamicin to daptomycin. Elution of daptomycin from PMMA showed within the first-hour initial peak values of 15-20 µg/mL. CONCLUSION: Daptomycin has a certain degree of activity in the intracellular environment of osteoblasts. Daptomycin admixed to PMMA remains bactericidal and does not significantly impair structural characteristics of the PMMA. The results of this paper suggest that daptomycin might be a potent alternative for treating osteomyelitis and implant-associated infection in trauma and orthopedic surgery caused by multiresistant strains.

Heterologous expression of Anabaena sp. PCC7120 cyanophycin metabolism genes cphA1 and cphB1 in Sinorhizobium (Ensifer) meliloti 1021.

Sinorhizobium meliloti infects leguminous plants resulting in a nitrogen-fixing symbiosis. Free living cells accumulate poly(3-hydroxybutyrate) (PHB) as carbon and energy source under imbalanced growth conditions. The cphA1 (7120) gene encoding a cyanophycin (CGP) synthetase of Anabaena sp. PCC7120 in plasmids pVLT31::cphA1 (7120) and pBBR1MCS-3::cphA1 (7120) was expressed in the wild-type S. meliloti 1021 and in a phbC-negative mutant generated in this study. Expression of cphA1 (7120) and accumulation of CGP in cells were studied in various media. Yeast mannitol broth (YMB) and pBBR1MCS-3::cphA1 (7120) yielded the highest CGP contents in both S. meliloti 1021 strains. Supplying the YMB medium with isopropyl-ß-D-thiogalactopyranoside, aspartic acid, and arginine enhanced CGP contents about 2.5- and 2.8-fold in S. meliloti 1021 (pBBR1MCS-3::cphA1 (7120)) and S. meliloti 1021 phbCΩKm (pBBR1MCS-3::cphA1 (7120)), respectively. Varying the nitrogen-to-carbon ratio in the medium enhanced the CGP content further to 43.8% (w/w) of cell dry weight (CDW) in recombinant cells of S. meliloti 1021 phbCΩKm (pBBR1MCS-3::cphA1 (7120)). Cells of S. meliloti 1021 (pBBR1MCS-3::cphA1 (7120)) accumulated CGP up to 39.6% in addition to 12.1% PHB (w/w, of CDW). CGP from the S. meliloti strains consisted of equimolar amounts of aspartic acid and arginine and contained no other amino acids even if the medium was supplemented with glutamic acid, citrulline, ornithine, or lysine. CGP isolated from cells of S. meliloti 1021 (pBBR1MCS-3::cphA1 (7120)) and S. meliloti 1021 phbCΩKm (pBBR1MCS-3::cphA1 (7120)) exhibited average molecular weights between 20 and 25 kDa, whereas CGP isolated from Escherichia coli S17-1 (pBBR1MCS-3::cphA1 (7120)) exhibited average molecular weight between 22 and 30 kDa. Co-expression of cyanophycinase from Anabaena sp. PCC7120 encoded by cphB1 (7120) in cphA1 (7120)-positive E. coli S17-1, S. meliloti 1021, and its phbC-negative mutant gave cyanophycinase activities in crude extracts, and no CGP granules occurred. A higher PHB content in S. meliloti 1021 (pBBR1MCS-3::cphB1 (7120)::cphA1 (7120)) in comparison to the control indicated that the cells used CGP degradation product (ß-aspartate-arginine dipeptide) to fuel PHB biosynthesis.

Analysis of lipid export in hydrocarbonoclastic bacteria of the genus Alcanivorax: identification of lipid export-negative mutants of Alcanivorax borkumensis SK2 and Alcanivorax jadensis T9.

Triacylglycerols (TAGs), wax esters (WEs), and polyhydroxyalkanoates (PHAs) are the major hydrophobic compounds synthesized in bacteria and deposited as cytoplasmic inclusion bodies when cells are cultivated under imbalanced growth conditions. The intracellular occurrence of these compounds causes high costs for downstream processing. Alcanivorax species are able to produce extracellular lipids when the cells are cultivated on hexadecane or pyruvate as the sole carbon source. In this study, we developed a screening procedure to isolate lipid export-negative transposon-induced mutants of bacteria of the genus Alcanivorax for identification of genes required for lipid export by employing the dyes Nile red and Solvent Blue 38. Three transposon-induced mutants of A. jadensis and seven of A. borkumensis impaired in lipid secretion were isolated. All isolated mutants were still capable of synthesizing and accumulating these lipids intracellularly and exhibited no growth defect. In the A. jadensis mutants, the transposon insertions were mapped in genes annotated as encoding a putative DNA repair system specific for alkylated DNA (Aj17), a magnesium transporter (Aj7), and a transposase (Aj5). In the A. borkumensis mutants, the insertions were mapped in genes encoding different proteins involved in various transport processes, like genes encoding (i) a heavy metal resistance (CZCA2) in mutant ABO_6/39, (ii) a multidrug efflux (MATE efflux) protein in mutant ABO_25/21, (iii) an alginate lyase (AlgL) in mutants ABO_10/30 and ABO_19/48, (iv) a sodium-dicarboxylate symporter family protein (GltP) in mutant ABO_27/29, (v) an alginate transporter (AlgE) in mutant ABO_26/1, or (vi) a two-component system protein in mutant ABO_27/56. Site-directed MATE, algE, and algL gene disruption mutants, which were constructed in addition, were also unable to export neutral lipids and confirmed the phenotype of the transposon-induced mutants. The putative localization of the different gene products and their possible roles in lipid excretion are discussed. Beside this, the composition of the intra- and extracellular lipids in the wild types and mutants were analyzed in detail.

Characterization of rubber particles and rubber chain elongation in Taraxacum koksaghyz.

BACKGROUND: Natural rubber is a biopolymer with exceptional qualities that cannot be completely replaced using synthetic alternatives. Although several key enzymes in the rubber biosynthetic pathway have been isolated, mainly from plants such as Hevea brasiliensis, Ficus spec. and the desert shrub Parthenium argentatum, there have been no in planta functional studies, e.g. by RNA interference, due to the absence of efficient and reproducible protocols for genetic engineering. In contrast, the Russian dandelion Taraxacum koksaghyz, which has long been considered as a potential alternative source of low-cost natural rubber, has a rapid life cycle and can be genetically transformed using a simple and reliable procedure. However, there is very little molecular data available for either the rubber polymer itself or its biosynthesis in T. koksaghyz. RESULTS: We established a method for the purification of rubber particles--the active sites of rubber biosynthesis--from T. koksaghyz latex. Photon correlation spectroscopy and transmission electron microscopy revealed an average particle size of 320 nm, and 13C nuclear magnetic resonance (NMR) spectroscopy confirmed that isolated rubber particles contain poly(cis-1,4-isoprene) with a purity > 95%. Size exclusion chromatography indicated that the weight average molecular mass (Mw) of T. koksaghyz natural rubber is 4,000-5,000 kDa. Rubber particles showed rubber transferase activity of 0.2 pmol min(-1) mg(-1). Ex vivo rubber biosynthesis experiments resulted in a skewed unimodal distribution of [1-14C]isopentenyl pyrophosphate (IPP) incorporation at a M of 2,500 kDa. Characterization of recently isolated cis-prenyltransferases (CPTs) from T. koksaghyz revealed that these enzymes are associated with rubber particles and are able to produce long-chain polyprenols in yeast. CONCLUSIONS: T. koksaghyz rubber particles are similar to those described for H. brasiliensis. They contain very pure, high molecular mass poly(cis-1,4-isoprene) and the chain elongation process can be studied ex vivo. Because of their localization on rubber particles and their activity in yeast, we propose that the recently described T. koksaghyz CPTs are the major rubber chain elongating enzymes in this species. T. koksaghyz is amenable to genetic analysis and modification, and therefore could be used as a model species for the investigation and comparison of rubber biosynthesis.

MASDET-A fast and user-friendly multiplatform software for mass determination by dark-field electron microscopy.

Electron microscopy has been used to measure the mass of biological nanoparticles since the early 60s, and is the only way to obtain the mass of large structures or parameters such as the mass-per-length of filaments. The ability of this method to sort heterogeneous samples both in terms of mass and shape promises to make it a key tool for proteomics down to the single cell level. A new multiplatform software package, MASDET, that can be run under MATLAB or as a standalone program is described. Based on a user-friendly graphical interface MASDET streamlines mass evaluation and greatly increases the speed of required optimisation procedures. Importantly, the immediate application of Monte-Carlo simulations to describe multiple scattering is possible, allowing the mass analysis of thicker samples and the generation of mass thickness maps.

Electron tomography of structures in the wall of hazel pollen grains.

The three-dimensional structure of channels and bacula cavities in the wall of hazel pollen grains was investigated by automated electron tomography in order to explore their role in the release of allergen proteins from the pollen grains. 3D reconstructions of 100-150 nm thick resin-embedded sections, stabilized by thin platinum-carbon coating, revealed that the channels aimed directly towards the surface of the grain and that the bacula cavities were randomly sized and merged into larger ensembles. The number and the dimensions of the ensembles were quantitatively determined by neighboring voxel analysis on thresholded reconstructed volumes. To simulate the allergen release, allergen proteins were approximated by a hard sphere model of a diameter corresponding to the largest dimension of the known 3D structure of the major birch allergen, Bet v 1, whose amino acid sequence is highly similar to the amino acid sequence of the major hazel allergen, Cor a 1. The analysis of positions where the hard sphere fits into the resolved channels and bacula cavity structures revealed that unbound allergens could freely traverse through the channels and that the bacula cavities support the path of the allergens towards the surface of the grain.

Alpha/beta hydrolase 1 is upregulated in D5 dopamine receptor knockout mice and reduces O2- production of NADPH oxidase.

Renal dopamine receptors have been shown to play a critical role in ROS-dependent hypertension. D5 dopamine receptor deficient (D5-/-) mice are hypertensive and have increased systemic oxidative stress which is manifested in the kidney and the brain. To further investigate the underlying mechanisms of hypertension in D5-/- mice, we used RNA arrays to compare mRNA levels of kidneys from wildtype and D5-/- mice. Our data show, that the mRNA level of alpha/beta hydrolase 1 (ABHD1) is significantly upregulated in D5-/- mice. Additionally, overexpression of ABHD1 in a new established renal proximal tubule cell line reduced the amount of O(2)(-) produced by the NADPH oxidase. Therefore the upregulation of ABHD1 in D5-/- mice could be an answer to the increased oxidative stress. While oxidative stress is an important factor for the development of hypertension, ABHD1 could play a protective role in the pathogenesis of hypertension.

Establishment of a novel anabolism-based addiction system with an artificially introduced mevalonate pathway: complete stabilization of plasmids as universal application in white biotechnology.

Plasmid stability in recombinant microorganisms is a very important requirement for highly efficient plasmid-based production processes in biotechnology. To stably maintain plasmids, we developed in this study an efficient and stringent novel anabolism-based addiction system, which can be widely used. This novel addiction system is based on two components: (i) an Escherichia coli HMS174(DE3) knockout mutant of the ispH gene coding for 4-hydroxy-3-methylbut-2-enyl diphosphate reductase (EC 1.17.1.2) of the deoxyxylulose 5-phosphate (DXP) pathway, impairing the synthesis of isopentenyl pyrophosphate (IPP) and (ii) a completely synthetic and episomal mevalonate (MVA) pathway as an alternative supplier of essential IPP. The latter is encoded by a plasmid that contains the genes for HMG-CoA reductases from Lactococcus lactis and Staphylococcus aureus plus HMG-CoA-synthase, MVA kinase, MVP kinase and MVPP decarboxylase from S. aureus. This plasmid should then also harbor the genes for the protein or for the pathway that will be produced or that will be utilized for production of a chemical. To demonstrate the functionality of this addiction system, a mutated cyanophycin synthetase gene (cphA(6308)C595S) was used. To determine plasmid stabilities, flasks experiments in media supplied or not supplied with antibiotics were carried out with the knockout mutant and two control strains, one harboring plasmid pCOLADuet-1::MVA1-5::cphA(6308) and the other harboring a conventional expression plasmid pET-23a::cphA(6308). As revealed by measuring the colony-forming units of aliquots spread on solid media with or without antibiotics, the knockout mutant revealed a plasmid stability of 100% whereas the control strains exhibited plasmid stabilities of only 64% and 2%, respectively. Radiometric enzyme activity measurements for CphA revealed only 95% and 12.5% of the activity in the control strains harboring pCOLADuet-1::MVA1-5::cphA(6308) and pET-23a::cphA(6308), respectively, in comparison to the activity measured in the knockout mutant. The knockout mutant synthesized 9.5% (w/w of cell dry weight (CDW)) of cyanophycin, and the control strain harboring pCOLADuet-1::MVA1-5::cphA(6308) synthesized 13.6% (w/w of CDW) after growth without antibiotics.

Synthesis and accumulation of cyanophycin in transgenic strains of Saccharomyces cerevisiae.

Cyanophycin [multi-L-arginyl-poly(L-aspartic acid) (CGP)] was, for the first time, produced in yeast. As yeasts are very important production organisms in biotechnology, it was determined if CGP can be produced in two different strains of Saccharomyces cerevisiae. The episomal vector systems pESC (with the galactose-inducible promoter GAL1) and pYEX-BX (with the copper ion-inducible promoter CUP1) were chosen to express the cyanophycin synthetase gene from the cyanobacterium Synechocystis sp. strain PCC 6308 (cphA(6308)) in yeast. Expression experiments with transgenic yeasts revealed that the use of the CUP1 promoter is much more efficient for CGP production than the GAL1 promoter. As observed by electrophoresis of isolated CGP in sodium dodecyl sulfate-polyacrylamide gels, the yeast strains produced two different types of polymer: the water-soluble and the water-insoluble CGP were observed as major and minor forms of the polymer, respectively. A maximum CGP content of 6.9% (wt/wt) was detected in the cells. High-performance liquid chromatography analysis showed that the isolated polymers consisted mainly of the two amino acids aspartic acid and arginine and that, in addition, a minor amount (2 mol%) of lysine was present. Growth of transgenic yeasts in the presence of 15 mM lysine resulted in an incorporation of up to 10 mol% of lysine into CGP. Anti-CGP antibodies generated against CGP isolated from Escherichia coli TOP10 harboring cphA(6308) reacted with insoluble CGP but not with soluble CGP, if applied in Western or dot blots.

Ralstonia eutropha H16 flagellation changes according to nutrient supply and state of poly(3-hydroxybutyrate) accumulation.

Two-dimensional polyacrylamide gel electrophoresis (2D PAGE), in combination with matrix-assisted laser desorption ionization-time of flight analysis, and the recently revealed genome sequence of Ralstonia eutropha H16 were employed to detect and identify proteins that are differentially expressed during different phases of poly(3-hydroxybutyric acid) (PHB) metabolism. For this, a modified protein extraction protocol applicable to PHB-harboring cells was developed to enable 2D PAGE-based proteome analysis of such cells. Subsequently, samples from (i) the exponential growth phase, (ii) the stationary growth phase permissive for PHB biosynthesis, and (iii) a phase permissive for PHB mobilization were analyzed. Among several proteins exhibiting quantitative changes during the time course of a cultivation experiment, flagellin, which is the main protein of bacterial flagella, was identified. Initial investigations that report on changes of flagellation for R. eutropha were done, but 2D PAGE and electron microscopic examinations of cells revealed clear evidence that R. eutropha exhibited further significant changes in flagellation depending on the life cycle, nutritional supply, and, in particular, PHB metabolism. The results of our study suggest that R. eutropha is strongly flagellated in the exponential growth phase and loses a certain number of flagella in transition to the stationary phase. In the stationary phase under conditions permissive for PHB biosynthesis, flagellation of cells admittedly stagnated. However, under conditions permissive for intracellular PHB mobilization after a nitrogen source was added to cells that are carbon deprived but with full PHB accumulation, flagella are lost. This might be due to a degradation of flagella; at least, the cells stopped flagellin synthesis while normal degradation continued. In contrast, under nutrient limitation or the loss of phasins, cells retained their flagella.

Damages of the tibial post in constrained total knee prostheses in the early postoperative course - a scanning electron microscopic study of polyethylene inlays.

BACKGROUND: Investigation of the risk of fracture of the polyethylene (PE) inlay in constrained total knee prostheses. METHODS: Three unused and seven polyethylene inlays that had been implanted in a patient's knee for an average of 25.4 months (min 1.1 months, max 50.2 months) were investigated using scanning electron microscopy (SEM). All inlays were of the same type and size (Genesis II constrained, Smith & Nephew). The PE surface at the transition from the plateau to the post was analyzed. RESULTS: The unused inlays had fissure-free surfaces. All inlays that had been implanted in a patient's knee already had distinct fissures at the front and backside of the post. CONCLUSION: The fissures of the transition from the plateau to the post indicated a loading-induced irreversible mechanical deformation and possibly cause the fracture of the inlay.

Calcium-dependent tetramer formation of S100A8 and S100A9 is essential for biological activity.

S100 proteins comprise the largest family of calcium-binding proteins. Members of this family usually form homo- or heterodimers, which may associate to higher-order oligomers in a calcium-dependent manner. The heterodimers of S100A8 and S100A9 represent the major calcium-binding proteins in phagocytes. Both proteins regulate migration of these cells via modulation of tubulin polymerization. Calcium binding induces formation of (S100A8/S100A9)2 tetramers. The functional relevance of these higher-order oligomers of S100 proteins, however, is not yet clear. To investigate the importance of higher-order oligomerization for S100 proteins, we created a set of mutations within S100A9 (N69A, E78A, N69A+E78A) destroying the high-affinity C-terminal calcium-binding site (EF-hand II). Mutations in EF-hand II did not interfere with formation of the S100A8/S100A9 heterodimer as demonstrated by yeast two-hybrid experiments and pull-down assays. In contrast, mass spectrometric analysis and density gradient centrifugation revealed that calcium-induced association of (S100A8/S100A9)2 tetramers was strictly dependent on a functional EF-hand II in S100A9. Failure of tetramer formation was associated with a lack of functional activity of S100A8/S100A9 complexes in promoting the formation of microtubules. Thus, our data demonstrate that calcium-dependent formation of (S100A8/S100A9)2 tetramers is an essential prerequisite for biological function. This is the first report showing a functional relevance of calcium-induced higher-order oligomerization in the S100 family.

Skeletonization versus pedicle preparation of the radial artery with and without the ultrasonic scalpel.

BACKGROUND: The radial artery (RA) is increasingly used for myocardial revascularization because of its presumed advantageous long-term patency rates. The vessel can be harvested as a pedicle or skeletonized. The aim of this study was to compare the skeletonization technique with pedicle preparation using either an ultrasonic scalpel or scissors. METHODS: Forty consecutive patients with coronary artery disease undergoing complete arterial revascularization were included in the study. In 20 patients the RAs were prepared using scissors and clips (group 1: skeletonization; group 2: pedicle). In another 20 patients the arteries harvested were prepared using an ultrasonic scalpel (group 3: skeletonization; group 4: pedicle). The RA was treated with papaverine to prevent spasm of the vessel during and after harvesting. Tissue specimens of each RA were taken to analyze endothelial morphology by scanning electron microscopy. After implantation of the RA, graft perfusion was measured with a flow probe. RESULTS: Harvesting the RA as a skeletonized vessel took more time as compared with pedicle preparation (group 1 vs group 2: 37.1 +/- 3.5 minutes vs 24.4 +/- 3.9 minutes; p < 0.001 and group 3 vs group 4: 31.1 +/- 3.5 minutes vs 25.6 +/- 3.7 minutes; p < 0.01). The number of hemostatic titanium clips was similarly higher in group 1 as opposed to group 2 (58.7 +/- 7.1 vs 38.7 +/- 7.1; p < 0.01). However, there was no difference between groups 3 and 4 (p = 0.086). The length of the RA after skeletonization with scissors and clips was 20.8 +/- 1.5 cm in contrast with 19.1 +/- 0.9 cm (p < 0.01) after dissection as a pedicle. In the groups using the ultrasonic scalpel, there was no difference in graft length (p = 0.062). Mean blood flow through the graft after establishing the proximal anastomosis was similar among all groups (groups 1, 2, 3, and 4: 50 +/- 20.1 mL/min, 53.8 +/- 24.3 mL/min, 56.3 +/- 25.1 mL/min, and 51.8 +/- 23 mL/min, respectively). Scanning electron microscopy demonstrated endothelial damage in all patients in groups 1, 2, and 3 and in 7 patients of group 4. Most endothelial lesions were minor except in group 3 in which 1 of 5 endothelial lesions were severe. Statistically significant differences was found between groups 1 and 2, and 3 and 4 with respect to the degree of endothelial damage (p < 0.01). CONCLUSIONS: Skeletonization using scissors and clips is more time consuming and technically more difficult, but yield significantly longer grafts. Skeletonization with an ultrasonic scalpel did not result in additional length and was more frequently associated with severe endothelial damage. Pedicle preparation using scissors or an ultrasonic scalpel is much simpler and faster, and does not jeopardize endothelial integrity.

High-resolution investigation of nanoparticle interaction with a model pulmonary surfactant monolayer.

The pulmonary surfactant film spanning the inner alveolar surface prevents alveolar collapse during the end-exhalation and reduces the work of breathing. Nanoparticles (NPs) present in the atmosphere or nanocarriers targeted through the pulmonary route for medical purposes challenge this biological barrier. During interaction with or passage of NPs through the alveolar surfactant, the biophysical functioning of the film may be altered. However, experimental evidence showing detailed biophysical interaction of NPs with the pulmonary surfactant film are scant. In this study, we have investigated the impact of a hydrophobic polyorganosiloxane (AmOrSil20) NPs on the integrity as well as on the structural organization of the model pulmonary surfactant film. Primarily, scanning force microscopic techniques and electron microscopy have been used to visualize the topology as well as to characterize the localization of nanoparticles within the compressed pulmonary surfactant film. We could show that the NPs partition in the fluid phase of the compressed film at lower surface pressure, and at higher surface pressure, such NPs interact extensively with the surface-associated structures. Major amounts of NPs are retained at the interface and are released slowly into the aqueous subphase during repeated compression/expansion cycles. Further, the process of vesicle insertion into the interfacial film was observed to slow down with increasing NP concentrations. The hydrophobic AmOrSil20 NPs up to a given concentration do not substantially affect the structural organization and functioning of pulmonary surfactant film; however, such NPs do show drastic impacts at higher concentrations.

Differential cytotoxic actions of Shiga toxin 1 and Shiga toxin 2 on microvascular and macrovascular endothelial cells.

Shiga toxin (Stx)-mediated injury to vascular endothelial cells in the kidneys, brain and other organs underlies the pathogenesis of haemolytic uraemic syndrome (HUS) caused by enterohaemorrhagic Escherichia coli (EHEC). We present a direct and comprehensive comparison of cellular injury induced by the two major Stx types, Stx1 and Stx2, in human brain microvascular endothelial cells (HBMECs) and EA.hy 926 macrovascular endothelial cells. Scanning electron microscopy of microcarrier-based cell cultures, digital holographic microscopy of living single cells, and quantitative apoptosis/necrosis assays demonstrate that Stx1 causes both necrosis and apoptosis, whereas Stx2 induces almost exclusively apoptosis in both cell lines. Moreover, microvascular and macrovascular endothelial cells have different susceptibilities to the toxins: EA.hy 926 cells are slightly, but significantly (∼ 10 times) more susceptible to Stx1, whereas HBMECs are strikingly (≥ 1,000 times) more susceptible to Stx2. These findings have implications in the pathogenesis of HUS, and suggest the existence of yet to be delineated Stx type-specific mechanisms of endothelial cell injury beyond inhibition of protein biosynthesis.

Bundles of hexagonally arranged tubules in timothy grass pollen: detection of a novel pollen component using anhydrous fixation and image analysis techniques in transmission electron microscopy.

Pollen from timothy grass (Phleum pratense L.) was subjected to various aqueous and non-aqueous fixation and preparation protocols for transmission electron microscopy. Only in the cytoplasm of anhydrously prepared pollen grains were conspicuous inclusions observed that range in size from less than 1 mum up to 8 or 10 mum. These bodies have so far not been described in the literature. Higher magnifications show that these inclusions consist of bundles of hexagonally arranged small tubules. In order to obtain details of the ultrastructure of this novel pollen component, TEM micrographs of ultrathin sections of hexagonally arranged tubules were analyzed using Fourier transform techniques of image analysis. It was found that the tubules form groups with quasi-periodic hexagonal arrangement, with an average centre-to-centre spacing between the neighbouring tubules of approximately 42 nm. Individual tubules are formed by 12 or 13 particles. The outer diameter of the tubules ranges between 22 and 24 nm. From our experiments, we conclude that the quasi-periodic hexagonally arranged tubules forming conspicuous cytoplasmic inclusions in dry timothy grass pollen grains are structurally similar to microtubules.

Identification and localization of cyanophycin in bacteria cells via imaging of the nitrogen distribution using energy-filtering transmission electron microscopy.

In this study the technique of energy-filtering transmission electron microscopy was applied to localize cyanophycin (CGP) in recombinant strains of Ralstonia eutropha. Since CGP is a polymer consisting of the amino acids aspartate and arginine, which functions as a temporary nitrogen reserve that is deposited as insoluble inclusions in the cytoplasm of the cell, its nitrogen content is significantly higher than that of the other cell matter. In this study, we recorded nitrogen distribution maps, which represent the location of CGP in ultrathin sections of resin-embedded cells of recombinant strains of R. eutropha expressing the cyanophycin synthetase of Anabaena sp. strain PCC 7120. Furthermore, the existence of nitrogen in CGP granules was additionally proven by recording electron energy-loss spectra. The samples of R. eutropha H16 (pBBR1MCS-2::cphA1(7120)) revealed a second type of granule, which does not show nitrogen in the corresponding maps and which can be identified as an inclusion containing poly(3-hydroxybutyric acid). The methods applied in this study are suitable to identify storage compounds with elevated nitrogen contents and to reveal their location in the bacterial cell. The methods are also very helpful to distinguish between inclusions of different chemical compositions that occur both at the same time in the cells but cannot or only hardly be distinguished by other methods.

Heat-shock protein HspA mimics the function of phasins sensu stricto in recombinant strains of Escherichia coli accumulating polythioesters or polyhydroxyalkanoates.

Polyhydroxyalkanoic acids (PHAs) are synthesized by unspecific PHA synthases and deposited as energy and carbon storage granules in the cytoplasm of many prokaryotes. The number and size of the granules depend on the presence of phasins which are amphiphilic structural proteins occurring at the granule surface. Recently, it was shown that polythioesters (PTEs) are also synthesized by PHA synthases. To increase the yield of these polymers, the role of recombinant phasins was analysed in an artificial PHA-producing Escherichia coli strain. Overexpressed PhaP1 from Ralstonia eutropha H16 affected poly(3-mercaptopropionate) [poly(3MP)] and poly(3-hydroxybutyrate) [poly(3HB)] accumulation in recombinant E. coli, which expressed the non-natural BPEC pathway consisting of butyrate kinase and phosphotransbutyrylase from Clostridium acetobutylicum and PHA synthase from Thiococcus pfennigii. For this, BPEC-carrying E. coli with and without phaP1 was cultivated in presence of glucose as carbon source for growth plus 3-mercaptopropionate or 3-hydroxybutyrate as precursor substrates for poly(3MP) or poly(3HB) biosynthesis, respectively. In the presence of PhaP1, the recombinant E. coli produced about 50 or 68 % more poly(3MP) or poly(3HB), respectively. Therefore, coexpression of PhaP1 alongside the BPEC pathway is important for optimizing strains towards enhanced PHA or PTE production. Furthermore, in the absence of PhaP1, large amounts of the 16 kDa heat-shock protein HspA were synthesized and bound to the granule surface. Unusual small granules occurred in the cells of the recombinant E. coli strains. The diameter of the poly(3MP) granules was only 55+/-12 nm or 105+/-12 nm, and of the poly(3HB) granules only 56+/-10 or 110+/-22 nm in the presence or absence of PhaP1, respectively. This explains why no single granules capable of accumulating PHAs or PTEs occurred in the recombinant E. coli, unlike in PhaP1-negative mutants of R. eutropha. Obviously, HspA mimics the phasin, thereby preventing coalescence of granules into one single granule. However, the effect of PhaP1 on granule size and on amounts of accumulated polymers was more severe than that of HspA.

Analysis of storage lipid accumulation in Alcanivorax borkumensis: Evidence for alternative triacylglycerol biosynthesis routes in bacteria.

Marine hydrocarbonoclastic bacteria, like Alcanivorax borkumensis, play a globally important role in bioremediation of petroleum oil contamination in marine ecosystems. Accumulation of storage lipids, serving as endogenous carbon and energy sources during starvation periods, might be a potential adaptation mechanism for coping with nutrient limitation, which is a frequent stress factor challenging those bacteria in their natural marine habitats. Here we report on the analysis of storage lipid biosynthesis in A. borkumensis strain SK2. Triacylglycerols (TAGs) and wax esters (WEs), but not poly(hydroxyalkanoic acids), are the principal storage lipids present in this and other hydrocarbonoclastic bacterial species. Although so far assumed to be a characteristic restricted to gram-positive actinomycetes, substantial accumulation of TAGs corresponding to a fatty acid content of more than 23% of the cellular dry weight is the first characteristic of large-scale de novo TAG biosynthesis in a gram-negative bacterium. The acyltransferase AtfA1 (ABO_2742) exhibiting wax ester synthase/acyl-coenzyme A:diacylglycerol acyltransferase (WS/DGAT) activity plays a key role in both TAG and WE biosynthesis, whereas AtfA2 (ABO_1804) was dispensable for storage lipid formation. However, reduced but still substantial residual TAG levels in atfA1 and atfA2 knockout mutants compellingly indicate the existence of a yet unknown WS/DGAT-independent alternative TAG biosynthesis route. Storage lipids of A. borkumensis were enriched in saturated fatty acids and accumulated as insoluble intracytoplasmic inclusions exhibiting great structural variety. Storage lipid accumulation provided only a slight growth advantage during short-term starvation periods but was not required for maintaining viability and long-term persistence during extended starvation phases.