Methanol diffusion and dynamics in zeolite H-ZSM-5 probed by quasi-elastic neutron scattering and classical molecular dynamics simulations.

Zeolite ZSM-5 is a key catalyst in commercially relevant processes including the widely studied methanol to hydrocarbon reaction, and molecular diffusion in zeolite pores is known to be a crucial factor in controlling catalytic reactions. Here, we present critical analyses of recent quasi-elastic neutron scattering (QENS) data and complementary molecular dynamics (MD) simulations. The QENS experiments show that the nature of methanol diffusion dynamics in ZSM-5 pores is dependent both on the Si/Al ratio (11, 25, 36, 40 and 140), which determines the Brønsted acid site density of the zeolite, and that the nature of the type of motion observed may vary qualitatively over a relatively small temperature range. At 373 K, on increasing the ratio from 11 to 140, the observed mobile methanol fraction increases and the nature of methanol dynamics changes from rotational (in ZSM-5 with Si/Al of 11) to translational diffusion. The latter is either confined localized diffusion within a pore in zeolites with ratios up to 40 or non-localized, longer-range diffusion in zeolite samples with the ratio of 140. The complementary MD simulations conducted over long time scales (1 ns), which are longer than those measured in the present study by QENS (≈1-440 ps), at 373 K predict the occurrence of long-range translational diffusion of methanol in ZSM-5, independent of the Si/Al ratios (15, 47, 95, 191 and siliceous MFI). The rate of diffusion increases slightly by increasing the ratio from 15 to 95 and thereafter does not depend on zeolite composition. Discrepancies in the observed mobile methanol fraction between the MD simulations (100% methanol mobility in ZSM-5 pores across all Si/Al ratios) and QENS experiments (for example, ≈80% immobile methanol in ZSM-5 with Si/Al of 11) are attributed to the differences in time resolutions of the techniques. This perspective provides comprehensive information on the effect of acid site density on methanol dynamics in ZSM-5 pores and highlights the complementarity of QENS and MD, and their advantages and limitations. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Highly Efficient Proton Conduction in the Metal-Organic Framework Material MFM-300(Cr)·SO4(H3O)2.

The development of materials showing rapid proton conduction with a low activation energy and stable performance over a wide temperature range is an important and challenging line of research. Here, we report confinement of sulfuric acid within porous MFM-300(Cr) to give MFM-300(Cr)·SO4(H3O)2, which exhibits a record-low activation energy of 0.04 eV, resulting in stable proton conductivity between 25 and 80 °C of >10-2 S cm-1. In situ synchrotron X-ray powder diffraction (SXPD), neutron powder diffraction (NPD), quasielastic neutron scattering (QENS), and molecular dynamics (MD) simulation reveal the pathways of proton transport and the molecular mechanism of proton diffusion within the pores. Confined sulfuric acid species together with adsorbed water molecules play a critical role in promoting the proton transfer through this robust network to afford a material in which proton conductivity is almost temperature-independent.

Combining quasielastic neutron scattering and molecular dynamics to study methane motions in ZSM-5.

Quasi-elastic neutron scattering (QENS) and molecular dynamics (MD) simulations are applied in combination to investigate the dynamics of methane in H-ZSM-5 zeolite catalysts used for methanol-to-hydrocarbons reactions. Methane is employed as an inert model for the methanol reaction feedstock, and studies are made of the fresh catalyst and used catalysts with varying levels of coke buildup to investigate the effect of coking on reactant mobility. Measurements are made in the temperature range from 5 to 373 K. Methane mobility under these conditions is found to be extremely high in fresh ZSM-5, with the majority of movements occurring too fast to be resolved by the QENS instrument used. A small fraction of molecules undergoing jump diffusion on QENS time scales is identified and found to correspond with short-range jump diffusion within single zeolite pores as identified in MD simulations. Agreement between QENS and MD mobility measurements is found to be within 50%, validating the simulation approach employed. Methane diffusion is found to be minimally affected by moderate levels of coke buildup, while highly coked samples result in the confinement of methane to single pores within the zeolite with minimal long-range diffusion.

Probing the dynamics and structure of confined benzene in MCM-41 based catalysts.

A combination of Molecular Dynamics (MD) simulations and Quasielastic Neutron Scattering (QENS) experiments has been used to investigate the dynamics and structure of benzene in MCM-41 based catalysts. QENS experiments of benzene as both an unconfined liquid and confined in the catalyst Pt/MCM-41 find that the mobility of benzene decreases upon confinement as shown by the decreased diffusion coefficients. Complementary MD simulations on benzene in MCM-41 show agreement with the QENS experiments when using a novel fully flexible model of MCM-41. Structural information from the MD simulations show that benzene in MCM-41 has a significantly different structure from that of the bulk liquid; with benzene molecules closer together and no prefered orientation.

SAPO-34 Framework Contraction on Adsorption of Ammonia: A Neutron Scattering Study.

Neutron scattering data was recorded from SAPO-34 using the OSIRIS instrument before and after repeated ammonia adsorption at pressures up to 8 bar. Coherent scattering from the zeolite framework provides the neutron powder diffraction pattern and gave evidence for anisotropic contraction on ammonia dosing. Incoherent quasielastic scattering from the hydrogen of the ammonia showed that mobile ammonia was present in the framework. The quasielastic data was fitted to a model where the ammonia was confined within the chabazite cage in the c direction of the crystal lattice, with diffusion solely occurring through the perpendicular 8-membered rings. The calculated diffusion constant reached a maximum of 6.3×10-8  m2 s-1 at 5 bar.

Proton Conduction in a Phosphonate-Based Metal-Organic Framework Mediated by Intrinsic "Free Diffusion inside a Sphere".

Understanding the molecular mechanism of proton conduction is crucial for the design of new materials with improved conductivity. Quasi-elastic neutron scattering (QENS) has been used to probe the mechanism of proton diffusion within a new phosphonate-based metal-organic framework (MOF) material, MFM-500(Ni). QENS suggests that the proton conductivity (4.5 × 10(-4) S/cm at 98% relative humidity and 25 °C) of MFM-500(Ni) is mediated by intrinsic "free diffusion inside a sphere", representing the first example of such a mechanism observed in MOFs.

Spectroscopic investigation into the design of solid-acid catalysts for the low temperature dehydration of ethanol.

The increased demand for bulk hydrocarbons necessitates research into increasingly sustainable, energy-efficient catalytic processes. Owing to intricately designed structure-property correlations, SAPO-34 has become established as a promising material for the low temperature ethanol dehydration to produce ethylene. However, further optimization of this process requires a precise knowledge of the reaction mechanism at a molecular level. In order to achieve this a range of spectroscopic characterization techniques are required to probe both the interaction with the active site, and also the wider role of the framework. To this end we employ a combination of in situ infra-red and neutron scattering techniques to elucidate the influence of the surface ethoxy species in the activation of both diethyl ether and ethanol, towards the improved formation of ethylene at low temperatures. The combined conclusions of these studies is that the formation of ethylene is the rate determining step, which is of fundamental importance towards the development of this process and the introduction of bio-ethanol as a viable feedstock for ethylene production.

The application of inelastic neutron scattering to investigate the interaction of methyl propanoate with silica.

A modern industrial route for the manufacture of methyl methacrylate involves the reaction of methyl propanoate and formaldehyde over a silica-supported Cs catalyst. Although the process has been successfully commercialised, little is known about the surface interactions responsible for the forward chemistry. This work concentrates upon the interaction of methyl propanoate over a representative silica. A combination of infrared spectroscopy, inelastic neutron scattering, DFT calculations, X-ray diffraction and temperature-programmed desorption is used to deduce how the ester interacts with the silica surface.

Methanol diffusion in zeolite HY: a combined quasielastic neutron scattering and molecular dynamics simulation study.

The diffusion of methanol in zeolite HY is studied using tandem quasielastic neutron scattering (QENS) experiments and molecular dynamics (MD) simulations at 300-400 K. The experimental diffusion coefficients were measured in the range 2-5 × 10(-10) m(2) s(-1) and simulated diffusion coefficients calculated in the range of 1.6-3.2 × 10(-9) m(2) s(-1). Activation energies were measured as 8.8 and 6.9 kJ mol(-1) using QENS and MD respectively. Differences may be attributed predominantly to the experimental use of a dealuminated HY sample, containing significant defects such as strongly adsorbing silanol nests, compared to a perfect simulated crystal containing only evenly distributed Brønsted acid sites. Experimental and simulated diffusivities measured in this study are lower than those obtained from those previously calculated in siliceous faujasite, due to methanol H-bonding to Brønsted acid sites as observed in the MD simulations. However, both experimental and simulated diffusivities were significantly higher than those obtained in NaX, due to the higher concentration of extraframework cations present in the previously studied structures.

Ammonia mobility in chabazite: insight into the diffusion component of the NH3-SCR process.

The diffusion of ammonia in commercial NH3-SCR catalyst Cu-CHA was measured and compared with H-CHA using quasielastic neutron scattering (QENS) and molecular dynamics (MD) simulations to assess the effect of counterion presence on NH3 mobility in automotive emission control relevant zeolite catalysts. QENS experiments observed jump diffusion with a jump distance of 3 Å, giving similar self-diffusion coefficient measurements for both Cu- and H-CHA samples, in the range of ca. 5-10 × 10(-10) m(2) s(-1) over the measured temperature range. Self-diffusivities calculated by MD were within a factor of 6 of those measured experimentally at each temperature. The activation energies of diffusion were also similar for both studied systems: 3.7 and 4.4 kJ mol(-1) for the H- and Cu-chabazite respectively, suggesting that counterion presence has little impact on ammonia diffusivity on the timescale of the QENS experiment. An explanation is given by the MD simulations, which showed the strong coordination of NH3 with Cu(2+) counterions in the centre of the chabazite cage, shielding other molecules from interaction with the ion, and allowing for intercage diffusion through the 8-ring windows (consistent with the experimentally observed jump length) to carry on unhindered.

Swellable, water- and acid-tolerant polymer sponges for chemoselective carbon dioxide capture.

To impact carbon emissions, new materials for carbon capture must be inexpensive, robust, and able to adsorb CO2 specifically from a mixture of other gases. In particular, materials must be tolerant to the water vapor and to the acidic impurities that are present in gas streams produced by using fossil fuels to generate electricity. We show that a porous organic polymer has excellent CO2 capacity and high CO2 selectivity under conditions relevant to precombustion CO2 capture. Unlike polar adsorbents, such as zeolite 13x and the metal-organic framework, HKUST-1, the CO2 adsorption capacity for the hydrophobic polymer is hardly affected by the adsorption of water vapor. The polymer is even stable to boiling in concentrated acid for extended periods, a property that is matched by few microporous adsorbents. The polymer adsorbs CO2 in a different way from rigid materials by physical swelling, much as a sponge adsorbs water. This gives rise to a higher CO2 capacities and much better CO2 selectivity than for other water-tolerant, nonswellable frameworks, such as activated carbon and ZIF-8. The polymer has superior function as a selective gas adsorbent, even though its constituent monomers are very simple organic feedstocks, as would be required for materials preparation on the large industrial scales required for carbon capture.

Application of inelastic neutron scattering to studies of CO2 reforming of methane over alumina-supported nickel and gold-doped nickel catalysts.

The methane reforming reaction with carbon dioxide as the oxidant over alumina-supported nickel and gold-doped nickel catalysts is studied using a variety of techniques such as reaction testing, vibrational spectroscopy (inelastic neutron scattering (INS), Raman scattering and infrared absorption), temperature-programmed oxidation (TPO), transmission electron microscopy and X-ray powder diffraction. The quantities of retained carbon and hydrogen are determined by TPO and INS, respectively. Minimal hydrogen retention indicates these catalysts to be very efficient at cycling hydrogen. The relative partitioning of hydrogen within the reaction media is used to formulate a qualitative description of the reaction kinetics. The presence of the gold modifier does not appear to provide any improvement in catalyst performance under the specified reaction conditions.

Quantification of surface species present on a nickel/alumina methane reforming catalyst.

An alumina-supported nickel catalyst has been used to effect the 'dry' reforming of methane, using CO(2) as the oxidant. After 6 hours on-stream, reaction was stopped and the sample analysed by inelastic neutron scattering (INS). The INS spectrum reveals the presence of hydrocarbonaceous species as well as hydroxyl species present at the catalyst surface. Through the use of appropriate reference compounds, calibration procedures have been developed to determine the concentration of the retained hydrocarbon and hydroxyl moieties. Ancillary temperature programmed oxidation experiments establish the total carbon content. This approach not only enables the extent of overall carbon laydown to be determined but it also identifies the degree to which hydrogen is associated with carbon and oxygen atoms. The methodology described is generic and should be applicable to a wide number of heterogeneously catalysed systems.

Effect of steam de-alumination on the interactions of propene with H-ZSM-5 zeolites.

Steam de-alumination is used to prepare a H-ZSM-5 material representative of industrial acid zeolite catalysts. Characterisation shows extensive loss of zeolite acidity but minimal loss of framework crystallinity in the treated material. The material's interaction with propene is probed by means of inelastic and quasielastic neutron scattering, providing information on the reactivity and mobility of the propene respectively. These results are compared to those previously obtained for propene in the untreated zeolite. The steaming treatment resulted in decreased reactivity of the zeolite toward olefin oligomerization, higher temperatures for reaction initiation, and increased mobility of the propene in the zeolite at all temperatures. Analysis of the motions of the propene revealed by QENS shows the mobility to be comparable to those previously reported for propane in similar materials but occurring at slower velocities due to the greater rigidity and polarisation of the propene molecule.

Onset of Propene Oligomerization Reactivity in ZSM-5 Studied by Inelastic Neutron Scattering Spectroscopy.

The techniques of quasi-elastic and inelastic neutron scattering (QENS and INS) are applied to investigate the oligomerization of propene over a ZSM-5 zeolite. Investigations are performed at low temperatures, allowing identification of the onset of the oligomerization reaction and observation of the low-energy spectral changes due to intermediate formation that are difficult to observe by optical methods. Oligomerization proceeds via formation of a hydrogen-bonded precursor by an interaction of the propene with an internal acid site followed by protonation and chain growth with protonation being the rate-limiting step. The use of quasi-elastic neutron scattering to observe changes in system mobility with temperature via the elastic window scan technique allows identification of the active temperature range where catalyst activity commences and permits targeting of the more time-consuming INS investigations to conditions of interest. From examination of the product's spectrum, the structure of the resulting oligomer is deduced to be primarily linear.

Modulating proton diffusion and conductivity in metal-organic frameworks by incorporation of accessible free carboxylic acid groups.

Three multi-carboxylic acid functionalised ligands have been designed, synthesised and utilised to prepare the new barium-based MOFs, MFM-510, -511, and -512, which show excellent stability to water-vapour. MFM-510 and MFM-511 show moderate proton conductivities (2.1 × 10-5 and 5.1 × 10-5 S cm-1, respectively) at 99% RH and 298 K, attributed to the lack of free protons or hindered proton diffusion within the framework structures. In contrast, MFM-512, which incorporates a pendant carboxylic acid group directed into the pore of the framework, shows a two orders of magnitude enhancement in proton conductivity (2.9 × 10-3 S cm-1). Quasi-elastic neutron scattering (QENS) suggests that the proton dynamics of MFM-512 are mediated by "free diffusion inside a sphere" confirming that incorporation of free carboxylic acid groups within the pores of MOFs is an efficient albeit synthetically challenging strategy to improve proton conductivity.

Structural and spectroscopic characterisation of C4 oxygenates relevant to structure/activity relationships of the hydrogenation of α,ß-unsaturated carbonyls.

In the present work, we have investigated the conformational isomerism and calculated the vibrational spectra of the C4 oxygenates: 3-butyne-2-one, 3-butene-2-one, 2-butanone and 2-butanol using density functional theory. The calculations are validated by comparison to structural data where available and new, experimental inelastic neutron scattering and infrared spectra of the compounds. We find that for 3-butene-2-one and 2-butanol the spectra show clear evidence for the presence of conformational isomerism and this is supported by the calculations. Complete vibrational assignments for all four molecules are provided and this provides the essential information needed to generate structure/activity relationships for the sequential catalytic hydrogenation of 3-butyne-2-one to 2-butanol.

The reaction of formic acid with RaneyTM copper.

The interaction of formic acid with RaneyTM Cu proves to be complex. Rather than the expected generation of a monolayer of bidentate formate, we find the formation of a Cu(II) compound. This process occurs by direct reaction of copper and formic acid; in contrast, previous methods are by solution reaction. This is a rare example of formic acid acting as an oxidant rather than, as more commonly found, a reductant. The combination of diffraction, spectroscopic and computational methods has allowed this unexpected process to be characterized.