Inhibition of nitrobenzene adsorption by water cluster formation at acidic oxygen functional groups on activated carbon.

The inhibition effect of nitrobenzene adsorption by water clusters formed at the acidic groups on activated carbon was examined in aqueous and n-hexane solution. The activated carbon was oxidized with nitric acid to introduce CO complexes and then outgassed in helium flow at 1273 K to remove them completely without changing the structural properties of the carbon as a reference adsorbent. The amounts of acidic functional groups were determined by applying Boehm titration. A relative humidity of 95% was used to adsorb water onto the carbon surface. Strong adsorption of water onto the oxidized carbon can be observed by thermogravimetric analysis. The adsorption kinetic rate was estimated to be controlled by diffusion from the kinetic analysis. Significant decline in both capacity and kinetic rate for nitrobenzene adsorption onto the oxidized carbon was also observed in n-hexane solution by preadsorption of water to the carbon surface, whereas it was not detected for the outgassed carbons. These results might reveal that water molecules forming clusters at the CO complexes inhibited the entrance of nitrobenzene into the interparticles of the carbon.

Prediction of microcystis blooms based on TN:TP ratio and lake origin.

We evaluated the relationship between TN:TP ratio and Microcystis growth via a database that includes worldwide lakes based on four types of lake origin (dammed, tectonic, coastal, and volcanic lakes). We used microcosm and mesocosm for the nutrient elution tests with lake water and four kinds of sediment (nontreated, MgO sprinkling treated, dissolved air flotation [DAF] treated, and combined treated sediment) in order to control TN:TP ratio and to suppress Microcystis growth. Microcystis growth was related to TN:TP ratio, with the maximum value at an optimum TN:TP ratio and the minimum values when the TN:TP ratios reached to 0 or "V. The kurtosis of the distribution curve varied with the type of lake origin; the lowest kurtosis was found in dammed lakes, while the highest was found in volcanic lakes. The lake trophic state could affect the change in the kurtosis, providing much lower kurtosis at eutrophic lakes (dammed lakes) than that at oligotrophic lakes (volcanic lakes). The relationship between TN:TP ratio and Microcystis growth could be explained by the nutrient elution tests under controlled TN:TP ratios through the various sediment treatments. A significant suppression of Microcystis growth of 70% could be achieved when the TN:TP ratios exceeded 21. Lake origin could be regarded as an index including morphological and geographical factors, and controlling the trophic state in lakes. The origin rather than trophic state for lakes could be considered as an important factor of TN:TP influences on Microcystis growth.

Textural and surface chemical characteristics of activated carbons prepared from cattle manure compost.

Two activated carbons (ACs) prepared from cattle manure compost (CMC) by ZnCl(2) activation were selected and out-gassed in a helium flow at various temperatures for 2h. The pore structure and surface chemical properties of the two selected ACs and their out-gassing treated ACs were characterized using N(2) adsorption-desorption, elements analysis, SEM and Boehm titration. A basic dye, methylene blue (MB), was chosen as an adsorbate to investigate the adsorption capacity for organic contaminant onto the activated carbons. It was found that the out-gassing treatment at 400 degrees C had little effect on the textural characteristics of the carbons but significantly changed the surface chemical properties such as surface functional groups concentration, pH and pH(PZC). The CMC-based activated carbons exhibited excellent performance for MB adsorption due to their high surface area, large mesopore volume and high nitrogen content. The kinetics of MB adsorption onto the activated carbons followed a pseudo-second-order equation, and the equilibrium data agreed well with the Langmuir model under the experimental conditions. The highest adsorption rate constant of k(ad) and the largest adsorption capacity of q(m) were found be 1.44x10(-4)g/mgmin and 519mg/g, respectively. The results suggested that the CMC-based activated carbons were effective adsorbents for the removal of methylene blue from aqueous solution.

Preparation of activated carbons from cattle-manure compost by zinc chloride activation.

Dried cattle-manure compost was pyrolyzed by a one-step process to obtain activated carbon using chemical activation by zinc chloride. The influence of activation parameters such as ZnCl(2) to cattle-manure compost (ZnCl(2)/CMC) ratio, activation temperature and retention time on the final products was investigated. The resultant activated carbons were characterized by nitrogen adsorption-desorption isotherms at 77 K. The results showed that the surface area and pore volume of activated carbons, which were estimated by BET and t-plot methods, were achieved as high as 2170 m(2)/g and 1.70 cm(3)/g in their highest value, respectively. Thermogravimetric analysis (TGA) was carried out to monitor the pyrolysis process of cattle-manure compost (CMC) and ZnCl(2) impregnated one (ZnCl(2)/CMC). The capabilities of phenol adsorption were also examined for the CMC carbons prepared with various treatments.

Development of a separate tank with an electrolysis-dependent bacteria controlling system for the long term storage of potable water.

For the long term storage of tap water, we developed a separate type of tank (5 m3) equipped with an electrolysis system to control bacterial growth. The electrolysis conditions using 20A direct current and a water flow rate of 10 L/min were capable of producing available chlorine (AC) at the rate of 5-8mg/min and raising the AC level of the stored tap water by about 0.2 mg/kg within 20-30 min The electrolyzed tap water with 0.2 mg/kg AC showed a capability per ml of killing 10(5)-10(6) cfu of bacteria such as Escherichia coli and Pseudomonas aeruginosa within 15 sec. A 6-month trial operation of the storage system with an automatic electrolysis control to keep AC level ranging 0.2-0.4 mg/kg demonstrated that the system worked well for the stored tap water in suppressing bacterial growth as well as in keeping good potable quality with reference to the 46 parameters specified for Japanese tap water. Actually, the electrolysis treatment was administered intermittently with an interval of about two weeks. Thus we believe the developed system has good potential to secure a potable water supply not only in the occasion of emergencies but also in countries having problems in the supply of safe drinking water.

Prediction of simultaneous adsorption of Cu(II) and Pb(II) onto activated carbon by conventional Langmuir type equations.

Removal of Cu(II) and Pb(II) by adsorption onto activated carbon was examined in single- and binary-component aqueous solutions representative of contaminated solutions containing heavy metals. Reversibility of adsorption of the heavy metals on the activated carbon was evaluated by desorption experiments. The number of the maximum adsorption sites and adsorption equilibrium constants of Cu(II) and Pb(II) were estimated by the results of single-component systems assuming the Langmuir adsorption model. The adsorption sites per gram of activated carbon resulted in similar values for Cu(II) and Pb(II) from the isotherms. The adsorption constant for Pb(II) was nearly 1.8 times greater than that of Cu(II). Rate constants of adsorption and desorption were also estimated from the kinetic analysis. Using the single set of common parameters obtained from the single-component systems, the experimental results for a binary-component system were quantitatively predicted. Competitive adsorption of Cu(II) and Pb(II) on the same adsorption sites was confirmed by both experimental and predicted results of adsorption in the binary mixture.

Historical transition of eco-structure in a tidal flat caused by expansion of sewerage treatment area.

An artificial tidal flat was prepared for the mitigation tool on coastal environment. However, it is considered that most of the flat was not restored to the sufficient amenities for aquatic living things, migratory birds, etc. because none of the ecological mechanisms were understood or planned for. It is therefore investigated in this paper that historical transition factors in ecosystem structure are selected and traced with the diffusion of a public sewerage system, and with environmental factors such as water quality, sediment condition, and aquatic producers in the Yatsu Tidal Flat. As a result, it can be defined that the tidal flat, just like a lagoon, was formed artificially with reclamation and development of its circumference at the first step of transition; the water quality and sediment condition gradually became brackish water and muddy sediment conditions, interactively. The ecosystem pyramid forming orderly layers according to trophic level appeared as a high-bio-production potential in its tidal flat. In the second step, i.e., in recent years, the characteristics of water quality and sediment conditions evolved into a foreshore tidal flat, namely, conditions in the flat observed were that the progression of water included a high concentration of chloride ion as seawater and sediment conditions became sandy. Because of that, the inflowing fresh water and organic mater from the land area decreased with the improvement of the public sewerage system. The ecosystem pyramid was distorted into a chaos pyramid, with inversion of Ulva spp.