GdDO3NI Enhanced Magnetic Resonance Imaging Allows Imaging of Hypoxia After Brain Injury.

BACKGROUND: Brain tissue hypoxia is a common consequence of traumatic brain injury (TBI) due to the rupture of blood vessels during impact and it correlates with poor outcome. The current magnetic resonance imaging (MRI) techniques are unable to provide a direct map of tissue hypoxia. PURPOSE: To investigate whether GdDO3NI, a nitroimidazole-based T1 MRI contrast agent allows imaging hypoxia in the injured brain after experimental TBI. STUDY TYPE: Prospective. ANIMAL MODEL: TBI-induced mice (controlled cortical impact model) were intravenously injected with either conventional T1 agent (gadoteridol) or GdDO3NI at 0.3 mmol/kg dose (n = 5 for each cohort) along with pimonidazole (60 mg/kg) at 1 hour postinjury and imaged for 3 hours following which they were euthanized. FIELD STRENGTH/SEQUENCE: 7 T/T2 -weighted spin echo and T1 -weighted gradient echo. ASSESSMENT: Injured animals were imaged with T2 -weighted spin-echo sequence to estimate the extent of the injury. The mice were then imaged precontrast and postcontrast using a T1 -weighted gradient-echo sequence for 3 hours postcontrast. Regions of interests were drawn on the brain injury region, the contralateral brain as well as on the cheek muscle region for comparison of contrast kinetics. Brains were harvested immediately post-imaging for immunohistochemical analysis. STATISTICAL TESTS: One-way analysis of variance and two-sample t-tests were performed with a P < 0.05 was considered statistically significant. RESULTS: GdDO3NI retention in the injury region at 2.5-3 hours post-injection was significantly higher compared to gadoteridol (mean retention fraction 63.95% ± 27.43% vs. 20.68% ± 7.43% for gadoteridol at 3 hours) while it rapidly cleared out of the muscle region. Pimonidazole staining confirmed the presence of hypoxia in both gadoteridol and GdDO3NI cohorts, and the later cohort showed good agreement with MRI contrast enhancement. DATA CONCLUSION: GdDO3NI was successfully shown to visualize hypoxia in the brain post-TBI using T1 -weighted MRI at 2.5-3 hours postcontrast. EVIDENCE LEVEL: 1 TECHNICAL EFFICACY: Stage 1.

Magnetically Reusable and Well-dispersed Nanoparticles for Oxygen Detection in Water.

In this study, we aimed to synthesize magnetically well-dispersed nanosensors for detecting dissolved oxygen (DO) in water, and explore their biological applications. Firstly, we synthesized two kinds of magnetic nanoparticle with average sizes of approximately 82 nm by one-step emulsion polymerization: polystyrene magnetic nanoparticles (Fe3O4@Os1-PS) and polymethylmethacrylate magnetic nanoparticles (Fe3O4@Os1-PMMA). Both types of nanoparticle present good dispersibility and fluorescence stability. The nanoparticles could be used as oxygen sensors that exhibited a high DO-sensitivity response in the range 0-39.30 mg/L, with a strong linear relationship. The nanoparticles have good magnetic properties, and so they could be recycled by magnet for further use. Recovered Fe3O4@Os1-PS still presented high stability after continued use in oxygen sensing for one month. Furthermore, Fe3O4@Os1-PS was employed for detecting the bacterial oxygen consumption of Escherichia coli (E-coli) to monitor the metabolism of bacteria. The results show that Fe3O4@Os1-PS provide high biocompatibility and non-toxicity. Polystyrene magnetic nanoparticles therefore present significant potential for application in biological oxygen sensing.

A Dual pH/O2 Sensing Film Based on Functionalized Electrospun Nanofibers for Real-Time Monitoring of Cellular Metabolism.

Real-time monitoring of dissolved oxygen (DO) and pH is of great significance for understanding cellular metabolism. Herein, a dual optical pH/O2 sensing membrane was prepared by the electrospinning method. Cellulose acetate (CA) and poly(ε-caprolactone) (PCL) nanofiber membrane blended with platinum (II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)-porphyrin (PtTFPP) was used as the DO sensing matrix, upon which electrospun nanofiber membrane of chitosan (CS) coupled with fluorescein 5-isothiocyanate (FITC) was used as the pH sensing matrix. The electrospun sensing film prepared from biocompatible biomaterials presented good response to a wide range of DO concentrations and physiological pH. We used it to monitor the exracellular acidification and oxygen consumption levels of cells and bacteria. This sensing film can provide a luminescence signal change as the DO and pH change in the growth microenvironment. Due to its advantages of good biocompatibility and high stability, we believe that the dual functional film has a high value in the field of biotechnology research.

Development of a molecular K+ probe for colorimetric/fluorescent/photoacoustic detection of K.

The potassium ion (K+) plays significant roles in many biological processes. To date, great efforts have been devoted to the development of K+ sensors for colorimetric, fluorescent, and photoacoustic detection of K+ separately. However, the development of molecular K+ probes for colorimetric detection of urinary K+, monitoring K+ fluxes in living cells by fluorescence imaging, and photoacoustic imaging of K+ dynamics in deep tissues still remains an open challenge. Herein, we report the first molecular K+ probe (NK2) for colorimetric, fluorescent, and photoacoustic detection of K+. NK2 is composed of 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TCF) as the chromophore and phenylazacrown-6-lariat ether (ACLE) as the K+ recognition unit. Predominate features of NK2 include a short synthetic procedure, high K+ selectivity, large detection range (5-200 mM), and triple-channel detection manner. NK2 shows good response to K+ with obvious color changes, fluorescence enhancements (about threefold), and photoacoustic intensity changes. The existence of other metal ions (including Na+, Mg2+, Ca2+, Fe2+) and pH changes (6.5-9.0) have no obvious influence on K+ sensing of NK2. Portable test strips stained by NK2 can be used to qualitatively detect urinary K+ by color changes for self-diagnosis of diseases induced by high levels of K+. NK2 can be utilized to monitor K+ fluxes in living cells by fluorescent imaging. We also find its excellent performance in photoacoustic imaging of different K+ concentrations in the mouse ear. NK2 is the first molecular K+ probe for colorimetric, fluorescent, and photoacoustic detection of K+ in urine, in living cells, and in the mouse ear. The development of NK2 will broaden K+ probes' design and extend their applications to different fields. Graphical abstract.

High-throughput extracellular pH monitoring and antibiotics screening by polymeric fluorescent sensor with LCST property.

Monitoring extracellular pH (pHe) is important for biology understanding, since pHe and its homeostasis are closely relevant to cellular metabolism. Hydrogel-based pHe sensors have attracted significant attention and showed wide application, while they are tedious with significant time-cost operation and reproducibility variations for high-throughput application. Herein, we synthesized two polymers for pHe monitoring which are soluble in water at room temperature with easy operations and high reproducibility among various micro-plate wells for high-throughput analysis. P1 (P(OEGMA-co-MEO2MA-co-pHS)) and P2 (P(OEGMA-co-pHS)) were synthesized via the Reversible Addition Fragmentation Chain Transfer (RAFT) copolymerization of oligo(ethylene glycol) methacrylate (OEGMA), 2-(2'-methoxyethoxy) ethyl methacrylate (MEO2MA) and the pH sensitive fluorescence moiety N-fluoresceinyl methacrylamide (pHS). P1 is soluble in water at room temperature (25 °C) while insoluble at the temperature above 33 °C, indicating its feature of lower critical solution temperature (LCST) at 33 °C. Further P1 showed higher pH sensitivity and photostability than P2 (without LCST property) when used at physiological temperature (37 °C). Thus, P1 was chosen to in-situ monitor the micro-environmental acidification of E. coli, Hela and Ramos cells during their growth, and the metabolism inhibiting activity of a representative antibiotic, ampicillin. Cell concentration-dependent cellular acidification and drug concentration-dependent inhibition of cellular acidification were observed, demonstrating that the LCST polymer (P1) is suitable for real-time cellular acidification monitoring as well as for high-throughput drug screening. This study firstly demonstrated the use of a LCST polymeric sensor for high-throughput screening of antibiotics and investigation of cell metabolism.

Close Temporal Relationship between Oscillating Cytosolic K+ and Growth in Root Hairs of Arabidopsis.

Root hair elongation relies on polarized cell expansion at the growing tip. As a major osmotically active ion, potassium is expected to be continuously assimilated to maintain cell turgor during hair tip growth. However, due to the lack of practicable detection methods, the dynamics and physiological role of K+ in hair growth are still unclear. In this report, we apply the small-molecule fluorescent K+ sensor NK3 in Arabidopsis root hairs for the first time. By employing NK3, oscillating cytoplasmic K+ dynamics can be resolved at the tip of growing root hairs, similar to the growth oscillation pattern. Cross-correlation analysis indicates that K+ oscillation leads the growth oscillations by approximately 1.5 s. Artificially increasing cytoplasmic K+ level showed no significant influence on hair growth rate, but led to the formation of swelling structures at the tip, an increase of cytosolic Ca2+ level and microfilament depolymerization, implying the involvement of antagonistic regulatory factors (e.g., Ca2+ signaling) in the causality between cytoplasmic K+ and hair growth. These results suggest that, in each round of oscillating root hair elongation, the oscillatory cell expansion accelerates on the heels of cytosolic K+ increment, and decelerates with the activation of antagonistic regulators, thus forming a negative feedback loop which ensures the normal growth of root hairs.

Electrically switchable photonic crystals based on liquid-crystal-infiltrated TiO2-inverse opals.

Electrically switchable photonic crystals are demonstrated based on TiO2 inverse opals infiltrated with liquid crystals. Macroporous anatase TiO2 inverse opals are fabricated from polystyrene opal templates through a sandwich vacuum backfilled method and followed by calcination. Upon liquid crystal infiltration, the optical properties of the hybrid organic/inorganic structure are characterized by reflectance measurements of the Bragg peak, the position of which can be switched using an external electric field. The physical mechanism underlying this switchable behavior is the reorientation of the liquid crystal molecules inside the spherical voids by the applied electric field, resulting in a significant change of the refractive index contrast between the liquid crystal and the TiO2 inverse opal. With advantageous features of cost-effective fabrication, easy integration, and electric control, such TiO2 inverse opals infiltrated with liquid crystals could play an important role in future development of active photonic devices.

Amphiphilic Fluorine-Containing Block Copolymers as Carriers for Hydrophobic PtTFPP for Dissolved Oxygen Sensing, Cell Respiration Monitoring and In Vivo Hypoxia Imaging with High Quantum Efficiency and Long Lifetime.

New amphiphilic star or multi-arm block copolymers with different structures were synthesized for enabling the use of hydrophobic oxygen probe of platinum (II)-tetrakis (pentafluorophenyl) porphyrin (PtTFPP) for bioanalysis. The amphiphilic star polymers were prepared through the Atom Transfer Radical Polymerization (ATRP) method by using hydrophilic 4-arm polyethylene glycol (4-arm-PEG) as an initiator. Among the five block copolymers, P1 series (P1a, P1b, and P1c) and P3 possess fluorine-containing moieties to improve the oxygen sensitivity with its excellent capacity to dissolve and carry oxygen. A polymer P2 without fluorine units was also synthesized for comparison. The structure-property relationship was investigated. Under nitrogen atmosphere, high quantum efficiency of PtTFPP in fluorine-containing micelles could reach to 22% and long lifetime could reach to 76 µs. One kind of representative PtTFPP-containing micelles was used to detect the respiration of Escherichia coli (E. coli) JM109 and macrophage cell J774A.1 by a high throughput plate reader. In vivo hypoxic imaging of tumor-bearing mice was also achieved successfully. This study demonstrated that using well-designed fluoropolymers to load PtTFPP could achieve high oxygen sensing properties, and long lifetime, showing the great capability for further in vivo sensing and imaging.

Hydrogel-Based Fluorescent Dual pH and Oxygen Sensors Loaded in 96-Well Plates for High-Throughput Cell Metabolism Studies.

In this study, we developed fluorescent dual pH and oxygen sensors loaded in multi-well plates for in-situ and high-throughput monitoring of oxygen respiration and extracellular acidification during microbial cell growth for understanding metabolism. Biocompatible PHEMA-co-PAM materials were used as the hydrogel matrix. A polymerizable oxygen probe (OS2) derived from PtTFPP and a polymerizable pH probe (S2) derived from fluorescein were chemically conjugated into the matrix to solve the problem of the probe leaching from the matrix. Gels were allowed to cure directly on the bottom of 96-well plates at room-temperature via redox polymerization. The influence of matrix's composition on the sensing behaviors was investigated to optimize hydrogels with enough robustness for repeatable use with good sensitivity. Responses of the dual sensing hydrogels to dissolved oxygen (DO) and pH were studied. These dual oxygen-pH sensing plates were successfully used for microbial cell-based screening assays, which are based on the measurement of fluorescence intensity changes induced by cellular oxygen consumption and pH changes during microbial growth. This method may provide a real-time monitoring of cellular respiration, acidification, and a rapid kinetic assessment of multiple samples for cell viability as well as high-throughput drug screening. All of these assays can be carried out by a conventional plate reader.

Luminescence materials for pH and oxygen sensing in microbial cells - structures, optical properties, and biological applications.

Luminescence including fluorescence and phosphorescence sensors have been demonstrated to be important for studying cell metabolism, and diagnosing diseases and cancer. Various design principles have been employed for the development of sensors in different formats, such as organic molecules, polymers, polymeric hydrogels, and nanoparticles. The integration of the sensing with fluorescence imaging provides valuable tools for biomedical research and applications at not only bulk-cell level but also at single-cell level. In this article, we critically reviewed recent progresses on pH, oxygen, and dual pH and oxygen sensors specifically for their application in microbial cells. In addition, we focused not only on sensor materials with different chemical structures, but also on design and applications of sensors for better understanding cellular metabolism of microbial cells. Finally, we also provided an outlook for future materials design and key challenges in reaching broad applications in microbial cells.

The oxindole Syk inhibitor OXSI-2 blocks nigericin-induced inflammasome signaling and pyroptosis independent of potassium efflux.

The inflammasome is a caspase-1-activating complex that is implicated in a growing number of acute and chronic pathologies. Interest has increased in identifying small molecular inhibitors of inflammasome signaling because of its role in clinically relevant diseases. It was recently reported that the protein tyrosine kinase, Syk, regulates pathogen-induced inflammasome signaling by phosphorylating a molecular switch on the adapter protein ASC. However, several aspects of the role of Syk in inflammasome signaling and the effects of its inhibition remain unclear. The aim of the present study is to explore in detail the effects of the oxindole Syk inhibitor OXSI-2 on various aspects of nigericin-induced inflammasome signaling. Our results indicate that OXSI-2 inhibits inflammasome assembly, caspase-1 activation, IL-1ß processing and release, mitochondrial ROS generation, and pyroptotic cell death. Using a novel live cell potassium sensor we show that Syk inhibition with OXSI-2 has no effect on potassium efflux kinetics and that blockade of potassium efflux with extracellular potassium alters Syk phosphorylation. The effects of OXSI-2 identified in this study provide context for the role of Syk in inflammasome signaling and demonstrate its importance in oxidative signaling upstream of inflammasome activation and downstream of ion flux.

1,8-Naphthalimide Derivative Dyes with Large Stokes Shifts for Targeting Live-Cell Mitochondria.

An ideal fluorescent dye for staining cell organelles should have multiple properties including specificity, stability, biocompatibility, and a large Stokes shift. Tunable photophysical properties enable 1,8-naphthalimide to serve as an excellent fluorophore in biomedical applications. Many naphthalimide derivatives have been developed into drugs, sensors, and other dyes. In this study, a series of 1,8-naphthalimide derivatives targeting live cell mitochondria were synthesized. Among these probes, Mt-4 was characterized as the best one, with highly specific mitochondrial localization, low cytotoxicity, and a large Stokes shift. More importantly, Mt-4 stood out as a potential mitochondrial dye for living-cell experiments involving induced mitochondrial stress arising from the treatments because Mt-4 shows enhanced fluorescence in mitochondrial stress situations.

A highly selective mitochondria-targeting fluorescent K(+) sensor.

Regulation of intracellular potassium (K(+) ) concentration plays a key role in metabolic processes. So far, only a few intracellular K(+) sensors have been developed. The highly selective fluorescent K(+) sensor KS6 for monitoring K(+) ion dynamics in mitochondria was produced by coupling triphenylphosphonium, borondipyrromethene (BODIPY), and triazacryptand (TAC). KS6 shows a good response to K(+) in the range 30-500 mM, a large dynamic range (Fmax /F0 ≈130), high brightness (ϕf =14.4 % at 150 mM of K(+) ), and insensitivity to both pH in the range 5.5-9.0 and other metal ions under physiological conditions. Colocalization tests of KS6 with MitoTracker Green confirmed its predominant localization in the mitochondria of HeLa and U87MG cells. K(+) efflux/influx in the mitochondria was observed upon stimulation with ionophores, nigericin, or ionomycin. KS6 is thus a highly selective semiquantitative K(+) sensor suitable for the study of mitochondrial potassium flux in live cells.

A near-infrared lysosomal probe for dynamic sulfur dioxide monitoring in inflammation.

Inflammation is a complex physiological response involving various cellular and molecular events. Sulfur dioxide (SO2), recognized as both an endogenous signaling molecule and anti-inflammatory agent, plays a crucial role in modulating inflammation and maintaining cellular homeostasis. To gain deeper insights into the dynamics of inflammation-related processes, real-time monitoring of SO2 concentrations within cellular organelles is imperative. Here, we developed a near-infrared fluorescent probe, R2, equipped with lysosomal targeting features. R2 effectively monitors dynamic SO2 concentration changes during inflammation. The fluorescence intensity at 703 nm of R2 shows a strong linear correlation with the concentration of SO2, displaying a rapid response time to SO2 within 10 s and maintaining excellent photostability. The successful application of R2 in elucidating dynamic SO2 concentration changes in lysosomal during cellular and rat inflammatory processes underscores its significant potential as a tool for understanding the pathogenesis of inflammation-related diseases.

A flexible nanofiber membrane containing dendritic oxygen probe for visual monitoring pressure distribution.

Pressure-sensitive paints (PSP) enable non-intrusive visualization of surface pressure distribution on model surface which is important for aerodynamic studies. However, conventional PSP materials suffer from photobleaching and inadequate sensitivity. In this work, we rationally designed and synthesized novel dendritic oxygen probes (PT1 and PT2) by covalently grafting fluorinated dendrons onto platinum tetrakis(pentafluorophenyl)porphyrin (PT0) (a common oxygen probe). Subsequently, PT2 loaded nanofibers membranes from polycaprolactone (PCL) were fabricated by electrospinning. Fabricated membranes showed high oxygen sensitivity (I0/I100 = 35.3) with excellent flexibility, good reversibility, and outstanding photostability (merely 2.0% intensity loss after prolonged irradiation). The pressure sensitivity was found around 0.73 % per kilopascal. Furthermore, significant variation in emission intensity with respect to the variation in air pressure (1.3-101.32 kPa), facilitates the naked eye visualization of the pressure distribution on the membrane surface. Such excellent oxygen and pressure sensitivity and photostability might be due to high fluorine contents of complex dendritic structure of PT2. This flexible fluorine-functionalized dendritic oxygen probe puts forward a facile and effective strategy to develop advanced PSP materials enabling accurate pressure mapping for aerodynamic studies.

Visual colorimetric label for real-time monitoring of SO2 concentration change in grape and mango during storage.

Sulfur dioxide (SO2) is widely utilized as a preservative in food transportation and storage, but excessive consumption poses health risks. This study presents a novel and efficient method for the real-time detection of SO2 using a sensor named TK, synthesized from triphenylamine and 2-cyanomethyl-1-methyl-quinolinium. The core mechanism involves the Michael addition reaction of the CC bond in TK with SO2, which disrupts the intramolecular charge transfer process, resulting in a significant color change and a blue shift in fluorescence emission. Methodologically, the sensor's response was quantified by the change in fluorescence intensity ratio (I425/I647) within a SO2 concentration range of 0-180 µM. The sensor exhibited high sensitivity and selectivity. For practical application, TK was incorporated into hydrophilic polyvinyl alcohol to create a smart label capable of visual colorimetry and fluorescence analysis. SO2 concentration changes were monitored by using this label, demonstrated by the color transition from burgundy red to colorless, yielding a maximum color difference (ΔE) of 73.6. The smart label was successfully used to monitor the quality of various grapes and mangoes during long-term storage, providing a reliable, equipment-independent method suitable for household use. The study offers a new tool for enhancing food safety and mitigating health risks associated with SO2 exposure.

A fluorescent colorimetric pH sensor and the influences of matrices on sensing performances.

A fluorescent colorimetric pH sensor was developed by a polymerization of a monomeric fluorescein based green emitter (SM1) with a monomeric 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran derived red emitter (SM2) in poly(2-hydroxyethyl methacrylate)-co-polyacrylamide (PHEMA-co-PAM) matrices. Polymerized SM1 (PSM1) in the polymer matrices showed bright emissions at basic conditions and weak emissions at acidic conditions. Polymerized SM2 (PSM2) in the polymer matrices exhibited a vastly different response when compared to PSM1. The emissions of PSM2 are stronger under acidic conditions than those under basic conditions. When SM1 and SM2 were polymerized in the same polymer matrix, a dual emission sensor acting as a ratiometric pH sensor (PSM1,2) was successfully developed. Because the PSM1 and PSM2 exhibited different pH responses and separated emission windows, the changes in the emission colors were clearly observed in their dual color sensor of PSM1,2, which changed emission colors dramatically from green at pH 7 to red at pH 4, which was detected visually and/or by using a color camera under an excitation of 488 nm. In addition to the development of the dual color ratiometric pH sensor, we also studied the effects of different matrix compositions, crosslinkers, and charges on the reporting capabilities of the sensors (sensitivity and pKa).

Micro-patterning and characterization of PHEMA-co-PAM-based optical chemical sensors for lab-on-a-chip applications.

We report a novel method for wafer level, high throughput optical chemical sensor patterning, with precise control of the sensor volume and capability of producing arbitrary microscale patterns. Monomeric oxygen (O(2)) and pH optical probes were polymerized with 2-hydroxyethyl methacrylate (HEMA) and acrylamide (AM) to form spin-coatable and further crosslinkable polymers. A micro-patterning method based on micro-fabrication techniques (photolithography, wet chemical process and reactive ion etch) was developed to miniaturize the sensor film onto glass substrates in arbitrary sizes and shapes. The sensitivity of fabricated micro-patterns was characterized under various oxygen concentrations and pH values. The process for spatially integration of two sensors (Oxygen and pH) on the same substrate surface was also developed, and preliminary fabrication and characterization results were presented. To the best of our knowledge, it is the first time that poly (2-hydroxylethyl methacrylate)-co-poly (acrylamide) (PHEMA-co-PAM)-based sensors had been patterned and integrated at the wafer level with micron scale precision control using microfabrication techniques. The developed methods can provide a feasible way to miniaturize and integrate the optical chemical sensor system and can be applied to any lab-on-a-chip system, especially the biological micro-systems requiring optical sensing of single or multiple analytes.

High Throughput Micropatterning of Optical Oxygen Sensor for Single Cell Analysis.

In this paper, we present our results from process development and characterization of optical oxygen sensors that are patterned by traditional UV lithography. An oxygen sensitive luminescent probe, platinum octaethylporphyrin (PtOEP), was encapsulated in commercially purchased photoresist (AZ5214) to form uniform thin sensor films on fused silica substrates. Plasticizer ethoxylated trimethylolpropane triacrylate (SR454) was added to the dye-photoresist sensor mixtures to improve the oxygen sensitivity. The optimum sensor mixture composition that can be patterned with maximum sensitivity was identified. The microfabrication process conditions, cell adherence and oxygen sensitivity results from patterned structures were characterized in detail. Down to 3 µm features have been fabricated on fused silica substrates using the developed techniques. The result implies the developed methods can provide a feasible way to miniaturize the optical sensor system for single cell analysis with precise control of sensor volume and response.

A near-infrared probe for the real-time detection of lysosomal pH in living cells under "wash free" conditions.

Lysosomal pH is an important indicator for the physiological state of eukaryotic cells. The real-time detection of intracellular lysosomal pH is critical for understanding and studying many physiological and pathological processes of cells. Herein, we designed and synthesized a series of novel pH sensors, namely W1, W2 and W3. By comparing the spectroscopic properties of the three molecules and their ability to target lysosomes in living cells, a specific probe W1 was selected for the quantitative analysis of lysosomal pH changes in live cells. W1 shows a fast, sensitive and highly selective red fluorescence response to an acidic pH value. The pKa value of W1 is 5.84, and the fluorescence intensity ratios of I743/I680 under acidic conditions show a good linear relationship with the pH value. In addition, W1 shows a 100-fold difference in fluorescence from an extracellular environment to an intracellular environment, allowing it to be used as a "wash free" staining probe to visualize the pH change of lysosomes. W1 was further applied to detect the changes of lysosomal pH during apoptosis and mitophagy. Thus, W1 is expected to be a potentially useful tool for monitoring the changes of lysosomal pH in cell-related physiological or pathological states.